portage-3.0.40 (2022-12-01) -------------- Features: * Optimize _slot_operator_check_reverse_dependencies by caching using lru_cache. In a ChromeOS use case, this patch decreases the running time from 311s to 197s with almost no memory usage increase. See bug #883071. * config: /etc/portage/sets.conf can now be a directory. Ditto for the Portage extension supporting sets.conf in ebuild repositories. * sets: Tests added for VariableSet changes to check @golang-rebuild works as intended. * cleanups: Drop long-obsolete Jython compatibility code. * cleanups: Use designated initializer syntax in src/ (C bits). * Add support for a distinct SYSROOT location that is not equal to / or ROOT. This is only expected to be used for cross-bootstrapping a new system from scratch using a crossdev environment under /usr/${CHOST}. Bug fixes: * ebuild: Handle Bash 5.2's change in behavior which enables the shopt 'patsub_replacement' by default. This is needed to avoid breaking existing working ebuilds. Future EAPIs will need to adjust the logic added by this change. See bug #881383. * sync: Clobber repositories using sync-type=git to match rsync behavior. This helps with issues where git-synced repositories can become confused if the remote is a CDN and then starts to diverge, preventing further syncs. * portage: sets: Fix DeprecationWarning in sets. * install-qa-check.d: 90gcc-warnigns: Disable -Wimplicit-function-declaration being fatal for now. The number of failures in bug #870412 is too large for the time being. * Fix definition of ESYSROOT to use SYSROOT's prefix. For a given location, we were basing ESYSROOT on the prefix of that location instead of the prefix used by the SYSROOT location. For example, if BROOT=/foo, ROOT=/bar, EPREFIX=/baz, EROOT=/bar/baz, and SYSROOT=/ then ESYSROOT should be /foo, not /baz. * depgraph: Resolve atoms using the correct root. This bug may have played out in different ways, but one example was a rebuild in / causing the same package to be added to ROOT, even when it had no other reason to be. * env-update: Also generate PATH definition in systemd user environment file /etc/environment.d/10-gentoo-env.conf * bintree: Properly assign filenames for remote binpkgs. * --disable-static is only passed for libtool-enabled configure scripts in EAPI 8. This avoids annoying warnings when a configure script has a flag such as --disable-static_link that would then trigger a QA warning (bug #814380). portage-3.0.39 (2022-11-20) -------------- Features: * gpkg: Call xz and zstd with -T N where N is the number of jobs from ${MAKEOPTS} for parallel compression (xz & zstd) and decompression (xz with newer versions). * gpkg: Add per format compression flags for binpkgs. This adds new config options BINPKG_COMPRESS_FLAGS_[format] to be used for different compression methods. General BINPKG_COMPRESS_FLAGS will be ignored if current method had specified BINPKG_COMPRESS_FLAGS_[format] (bug #871573). * sync: git: git will sync with --depth=1 unless otherwise specified in repos.conf (bug #824782). * install-qa-check.d: 90gcc-warnings: Add additional code quality warnings which are indicative of problems with LTO in particular: * -Wbuiltin-declaration-mismatch * -Wlto-type-mismatch (LTO esp.) * -Wmismatched-dealloc * -Wodr (LTO esp.) * -Wreturn-type * -Wstringop-overflow (GCC, FORTIFY_SOURCE) * -Wfortify-source (Clang, FORTIFY_SOURCE) * -Wstrlcpy-strlcat-size * -Wstrncat-size * -Wsuspicious-bzero * -Wvarargs * -Wargument-undefined-behaviour (Clang) * -Wincompatible-function-pointer-types (Clang, becomes fatal in Clang 16) (note we already have -Wincompatible-pointer-types in the list for GCC) * -Wundefined-reinterpret-cast (Clang, C++ strict aliasing) * -Wcast-function-type-strict (Clang, CFI) * Further -Wformat matches for missing specifiers. In future, we may warn on all -Wformat (in particular because of e.g. time_t & LFS). * install-qa-check.d: 90gcc-warnings: Always die on -Wimplicit-function-declaration and remove bin/check-implicit-pointer-usage.py of dubious licencing (it was broken since GCC 4.5 because of output changes anyway, bug #365655). -Wimplicit-function-declaration becomes an error in Clang 16 onwards and GCC is likely to do the same from 14 onwards. See bug #870412. * ecompress, etc: Support additional compression suffixes for texinfo: .Z, .bz2, .lzma, .lz, .xz, .zst (bug #757525). Bug fixes: * binpkg: Deprecate BINPKG_FORMAT in the binpkg manifest ('Packages') because it can become out-of-sync with reality and shouldn't be relied upon anyway (bug #877419). * binpkg: Add various asserts / integrity checks to detect structure mismatches and detect problems earlier (bug #877357, bug #877271, bug #877419). * binpkg: gpkg: Try to correct mismatched structures (old/new gpkg structure) (bug #877271). * binpkg: gpkg: Handle package renames ('updates') where the same category was used but with a new package name (bug #877357). * binpkg: gpkg: Don't silence compressor stderr to ease debugging (bug #877215). * Manifest: Fix Manifest.addFile() calls and add tests (bug #875860). * ecompress, etc: Pass --quiet to xz to reduce noise from "reducing threads" messages. * ecompress, etc: Pass --memlimit-compress=50% to xz to avoid breakage on 32-bit systems with large -Tn. Required for < xz-5.3.3_alpha and has an equivalent effect to the limiting that comes with newer xz versions. We don't need it for decompression as it's there by default in newer xz and it's a no-op in older xz. * emerge(1), make.conf(5), xpak(5): document BINPKG_FORMAT and the gpkg binary packate format further. * sync: git: Fix sync printing local repo path (bug #875812) portage-3.0.38.1 (2022-10-04) -------------- Bug fixes: * ecompress: Fix typo in ___makeopts_jobs (bug #874597). portage-3.0.38 (2022-10-01) -------------- Features: * unpack now calls xz(1) with -T N where N is the number of jobs from ${MAKEOPTS}. This allows decompression in parallel with new enough xz (>= xz-utils 5.3.3 alpha) and where the source file was compressed using the parallel xz compressor (which becomes the default with newer xz too). * portage: sets: Parse INCLUDES/EXCLUDES in VariableSet which allows properly checking for dependencies. Update @golang-rebuild accordingly which now includes all packages depending on dev-lang/go (bug #827974, bug #865115) * cnf: Provide a @rust-rebuild set, similar to @golang-rebuild. * bin: ecompress: xz, zstd: Pass -T N where N is the number of jobs from ${MAKEOPTS} to xz, zstd for parallel compression. * bin: ecompress: xz: Pass -9 to xz for compression level like we do for bzip2 & gzip. Bug fixes: * emerge: Scheduler: Fix filenames for binpkgs in some cases - reuse existing filename and don't allocate a new one (bug #872392). * dbapi: bintree: Avoid fetching 'Packages' multiple times (bug #864259). * binpkg: Handle failure of various BINPKG_COMPRESS_* commands (bug #871570). * data: Fix PORTAGE_USERNAME default (bug #873088). * bin: isolated-functions.sh: return number of CPUs in ___makeopts_jobs as default instead of 1 to match Portage's behavior on the Python side. * bin: ecompress: Recognize .lz, .lzo, .lz4, and .zst as compressed file suffixes for the purposes of the internal compressed file collision check. * bin: ecompress: zstd: Set '-q --rm' in PORTAGE_COMPRESS_FLAGS to behave like other compressors. * portage: _global_updates: Fix update summary output. portage-3.0.37 (2022-09-23) -------------- Bug fixes: * _emerge: SpawnProcess: Avoid sandbox violations with PROPERTIES="interactive" when accessing /dev/tty* (bug #870310). * _emerge: Binpkg: Don't create empty stray binpkgs (bug #870283). * bin: gpkg-sign: Check gpg configuration before using (bug #869470). * portage: gpkg: Allow missing files (needed for when ebuilds touch ${EROOT} in pkg_*) when creating binpkgs with quickpkg (bug #870229). * portage: getbinpkg: Fix --getbinpkgonly command list with e.g. rsync (bug #866197). * portage: checksum: Fix PORTAGE_CHECKSUM_FILTER. Regression from 3.0.31. portage-3.0.36 (2022-09-09) -------------- Bug fixes: * The layout of gpkg (new binpkg format) packages has been fixed (bug #865905). * Fix getbinpkg fetching (bug #864160). portage-3.0.35 (2022-08-23) -------------- Features: * Portage can now set scheduling policies using the PORTAGE_SCHEDULING_POLICY and PORTAGE_SCHEDULING_PRIORITY variables. See make.conf.example for details. See also https://wiki.gentoo.org/wiki/Portage_niceness. * The header of build.log now contains the package's slot (bug #864382). Bug fixes: * xml: Fix XML node parsing (resulted in duplicate USE flag descriptions in gentoolkit, bug 858791). This code is thought to have only one consumer (gentoolkit, and only as of its most recent releases), so impact is not severe. * portage: dbapi: porttree: fix _set_porttrees() to operate correctly if passed a generator. Fixes e.g. blank emerge --metadata caches in /var/cache/edb which affected eix (bug #865635). Regression from 3.0.31. * logging: don't clutter with a global logger and instead scope to each module. Allows further logging refactoring in future. * estrip: fix double slash for older EAPIs (bug #862600). * estrip: avoid spurious NEEDED warning when no ELF files installed for < EAPI 7 (bug #749624, bug #862606). * estrip: apply scanelf optimisation for EAPI 7+ too (bug #749624, bug #862606). * dispatch-conf: respect (E)ROOT * install-qa-check.d: 60pkgconfig: drop noisy pkg-config mismatched Version field check (bug 857654). * install-qa-check.d: 60pkgconfig: fix --validate check by adding ${ED}/usr/{lib*,share} to search path. * install-qa-check.d: 60pkgconfig: only check defined variables for ${EPREFIX} compliance (bug 860825). * install-qa-check.d: 60pkgconfig: display the detected version from the .pc file (improves the QA warning output), and hint to the user/developer about the existence of QA_PKGCONFIG_VERSION to silence the warning. * install-qa-check.d: 60pkgconfig: use eqatag for nicer output. * install-qa-check.d: 60pkgconfig: use ver_test where possible in version comparison checks to avoid warning if the Version field in the .pc file is equivalent to the ebuild version. * install-qa-check.d: 80libraries: include Darwin/Mach-O objects in checks. * install-qa-check.d: 80multilib-strict: use file/find from Prefix instead of absolute paths in /usr/bin. * install-qa-checks.d: 90gcc-warnings: add arm64, aarch64 (used by Apple), loongarch64, riscv64, s390x to list of 64-bit arches which affects the severity of some warnings (like pointer truncation). * install-qa-check.d: 90world-writable: include EPREFIX in paths. * portage: output: update obsolete /etc/init.d/functions.sh path. * bin: style tweaks to conform to Gentoo style (mostly variable bracing). * doins: fix D check, add EPREFIX check * misc-functions.sh: add Prefix fixups, like including EPREFIX in INSTALL_MASK for /usr/share for noman, noinfo, nodoc. * phase-function.sh: mark ED, EROOT read-only variables * eapi.sh: cleanup obsolete references to unofficial 5-hdepend EAPI. * isolated-functions.sh: sync __makeopts_jobs implementation with multiprocessing.eclass. * ebuild(1): improve descriptions of various phase functions. * emerge(1): mention --with-bdeps=n behavior for both --usepkg (-k) and --usepkgonly (-K) (bug #863422). * ecompress: add option to lz4 in order to be able to compress multiple files at once (bug #672916). portage-3.0.34 (2022-07-20) -------------- Bug fixes: * checksum: fix trying to use discard on a frozenset(). * ebuild(5): mention doexe behavior is undefined if exeinto not yet called. * ebuild(5): fix typos. portage-3.0.33 (2022-07-18) -------------- Bug fixes: * env-update: Handle BROOT vs ROOT distinction for PATH (and other variables like PREROOTPATH and ROOTPATH). The issue being that only some variables are relevant for execution (and hence need to be derived from BROOT), while others need to correspond to EROOT for e.g. library paths. This should help with Clang stage building. * Build: Fix test suite file data processing (copying of .gnupg data for the gpkg tests led to a failure in src_test in the portage ebuild). * emerge: drop obsolete fixpackages warning (as a result of refactoring, started to show on every emerge, but is harmless and left over from many years ago). Bug #858407. * quickpkg: Fix quoting/splitting of BINPKG_COMPRESS_FLAGS arguments. Bug #857933. * estrip: fix double prefix (regression from "don't call estrip twice" fix in 3.0.31). Bug #858818. * ebuild(5): dolib, libopts: mention dolib, libopts being banned in EAPI 7. * ebuild(5): dohtml: mention dohtml is banned in EAPI 7. * ebuild(5): hasv: mention hasv is banned in EAPI 8. * ebuild(5): dosym: mention dosym -r for EAPI 8. * ebuild(5): einstall: mention einstall was banned in EAPI 6. * ebuild(5): econf: add --docdir and --htmldir for EAPI 6, add --with-sysroot for EAPI 7, add --datarootdir and --disable-static for EAPI 8. * ebuild(5): econf: drop --disable-dependency-tracking from "example" because it's confusing (implies it was always added, even before EAPI 4). * ebuild(5): modernize examples slightly. portage-3.0.32 (2022-07-11) -------------- Bug fixes: * Fix marking all news items as relevant. See bug #857669. * Allow nested ebegin again while there's a lack of consensus on banning it. * Fix use of deprecated (now removed) getchildren() call in XML parser, which caused failures with gentoolkit. See bug #857537. (Note that this was not originally in the release notes for 3.0.32, but the fix was in 3.0.32). * Fix doc generation by removing reference to removed EAPIs. See bug #857486. portage-3.0.31 (2022-07-10) -------------- Breaking changes: * repoman support dropped. Please migrate to pkgcheck. See bug 835013. * Remove support for never-official EAPIs: "4-python", "5-progress". Further cleanups as a result allowed removal of "USE alias" support too. * Drop support for Python 3.6. It's been EOL upstream since 2021-12-23. The minimum version of Python for Portage is now Python 3.7. Features: * GLEP 78 "gpkg" binary package format support, including the ability to sign binpkgs! See bug 500630, bug 659864, bug 672672, bug 773259, bug 820578. This is still somewhat experimental! To try it out: - set BINPKG_FORMAT="gpkg" in make.conf; - optionally, set FEATURES="binpkg-signing binpkg-request-signature", and so on. See cnf/make.conf.example for the full details, options, and documentation. * emerge: Add -X short option for --exclude. * emerge: Support the "foot" terminal for title updates. * Recognize LoongArch ABIs in multilib_category. * depclean: Return failure via exit code if requested packages aren't depcleaned. See bug 851750. * estrip: Optimize calls (avoid duplicate call) by using previously collected scanelf data. See bug 749624 * autoclean: Optimize unmerges by only enabling autoclean for global updates and/or depcleans. This avoids needing to iterate over all installed packages after each individual removal. * vartree: Optimize by skipping `env-update` call (which is expensive, as it ends up calling `ldconfig` to regenerate ld.so.cache) if no files were installed (e.g. virtual/). * vartree: Optimize by avoiding VDB lock contention (avoid taking lock if no blockers). * QA: warn if 'eend' is called without a corresponding 'ebegin', and vice-versa: if 'ebegin' is called without a corresponding 'eend'. See bug 835824 and bug 835823. * QA: install-qa-check.d: Add 60pkgconfig check which: - checks libdir in installed .pc files - checks paths not respecting EPREFIX in .pc files - runs pkg-config --validate on .pc files - checks for mismatched version in .pc files vs ${PV}. Ebuilds can override this using QA_PKGCONFIG_VERSION. * QA: install-qa-check.d: Update 20runtime-directories to warn on /var/tmp usage too. * emerge: Deduplicate atoms in 'dropped' message for --keep-going. * dispatch-conf: Warn about changing the 'use-rcs' setting. See bug 837533. * Lots of general refactoring and code cleanups. Bug fixes: * Disable SONAME dependencies by default again (i.e. set --ignore-soname-deps=y to default on). See bug 687956 and bug 829623. This was done because of problems caused with depcleans. * git: Mark repository as safe for newer versions of git (>= git-2.35.2). See bug 838223 and bug 838271. * dosym: Fix EAPI check for '-r' (relative) flag. It would previously allow using an EAPI 8 only feature. * ebuild: Fix re-sourcing IDEPEND (EAPI 8+). * estrip: Fix race when creating build-id debug symlinks. See bug 831927. * MergeProcess: Fix bug causing unnecessary ld.so.cache regeneration even when no libraries were installed. This used to work in the past, so is viewed as a bug fix, rather than an optimization, although it's a bit of both. See bug 836375. * MiscFunctionsProcess: Avoid clobbering the main sandbox.log if a "die hook" is invoked. This should prevent sandbox.log being blank in many cases. * Drop /run warning as it ended up being too noisy and we've decided to workaround/fix (depending on your perspective) the issues in packages themselves, given only one package was actually at fault here: bug 832853. * movefile: Merge symlinks atomically. This should reduce the risk of build failures during parallel builds (multiple emerge jobs). See bug 836400. * Improve error message when Bash version is too old for an ebuild to be read. * Minor improvements to 'die' output. * Undo dep_zapdeps change in 3.0.29 as it introduced a regression w.r.t solving blockers for gentoo-kernel. See bug 833014. * QA: install-qa-check.d: update 95empty-dirs to mention Portage behavior change for EAPI 8+. * QA: install-qa-check.d: Fix usage of obsolete 'egrep' and 'fgrep' which now emit warnings with an upcoming grep release (> 3.7). * portageq: Ditto re egrep/fgrep. * util: Fix Whirlpool implementation breaking (crashing/failing tests) with OpenSSL 3. This wasn't noticed before as previously, OpenSSL exposed its Whirlpool implementation by default, whereas it's now marked as legacy. See bug 846389. * socks5-server: Fix Python 3.10 DeprecationWarning. See bug 794115. * portage.eapi: Include workaround for consumers with misconfigured logger to avoid needing a newer gentoolkit. See bug 838406. * CI: Run 'black' on remaining files missed in the previous conversion and fix CI to catch regressions related to this. * CI: Test with Python 3.11. * CI: Drop references to unsupported Python 3.6. * make.conf: document MAKEOPTS defaulting to the number of processors for the number of jobs in make.conf(5). * dispatch-conf: fix description of 'frozen-files' format in dispatch-conf.conf man page. See bug 830618. portage-3.0.30 -------------- * fix warning/crash on bad PROVIDES in package. See bug 828966. * avoid infinite loop in _optimized_copyfile. See bug 828844. portage-3.0.29 -------------- * check for inconsistent/missing PROVIDES during package (and binpkg) installation. See bug 811462. * avoid pulling in newer slots for upgrades in some cases. See bug 828136. * enable SONAME dependencies for binpkgs by default. See bug 687956. * add new options to allow avoiding building/using binpkgs for live ebuilds: FEATURES="binpkg-live" and --usepkg-exclude-live. * add emphasis in output to user patches being applied. portage-3.0.27 -------------- * improve blocker output to make it clear which blockers are not satisfied. * use distinct colors for einfo/elog and ewarn/eqawarn. portage-3.0.26 -------------- * fix broken FILESDIR copying logic. portage-3.0.25 (yanked) ----------------------- * fix Python < 3.8 compatibility of FILESDIR copying code. portage-3.0.24 -------------- * remove doebuild(dbkey=...) support that was deprecated since 2013. * pass metadata internally using key=value format. * include INHERIT key md5-cache to match pkgcore. * reformat Portage code using black. * fix Python 3.10 deprecation warnings. * replace compat_coroutine use with modern async. portage-3.0.23 -------------- * enable autogroup scheduling with pid-sandbox if possible. This should make the kernel respect niceness better. * add support conf-update.d hooks. * display all preserved libraries with --verbose. * restore QA warnings when EXPORT_FUNCTIONS is called before inherit. * catch more setuptools warnings via the respective QA check. portage-3.0.22 -------------- * USE flags are now sorted with respect to numerical segments in emerge output (e.g. python3_10 comes after python3_9). * setuptools version normalization warnings are now ignored. * FEATURES=installsources no longer copies irrelevant directory trees with gcc-11. * sdist archives built using "build" now include setup.py. portage-3.0.21 -------------- * EAPI 8 fixups. portage-3.0.20 -------------- * Finalize EAPI 8. portage-3.0.19 -------------- * Enable EAPI 8. portage-3.0.18 -------------- * profile-repo-deps is supported in layout.conf profile-formats. portage-3.0.16 -------------- * emirrordist supports the content-hash distfiles mirror layout. portage-3.0.15 -------------- * FEATURES=binpkg-multi-instance is now enabled by default. portage-3.0.13 -------------- * FETCHCOMMAND now supports a \${DIGESTS} placeholder which expands to a space separated list of digests. Refer to the FETCHCOMMAND documentation in the make.conf(5) man page. portage-3.0.6 -------------- * emerge --search now detects regular expressions automatically. This behavior is controlled by the --regex-search-auto option. * make.conf now treats variable names that begin with two underscores as local variables which are not displayed by emerge --info --verbose. * egencache --update-pkg-desc now has a --verbose option which causes it to emulate esync --verbose output. * env-update now generates a systemd user-session environment in a file named /etc/environment.d/10-gentoo-env.conf. * binrepos.conf is a new configuration file that acts as a substitute for the PORTAGE_BINHOST variable, and allows each repository to have a separate FETCHCOMMAND which can be used to customize authentication. This file is documented in the portage(5) man page. portage-3.0.0 -------------- * Dropped support for Python 2.x. portage-2.3.101 -------------- * The new PORTAGE_LOG_FILTER_FILE_CMD make.conf(5) variable specifies a command that filters build log output to a log file. In order to filter ANSI escape codes from build logs, ansifilter(1) is a convenient setting for this variable. portage-2.3.100 -------------- * New BINPKG_COMPRESS=zstd default (does not apply to installed systems using the old bzip2 default). portage-2.3.97 -------------- * Support for the PORTAGE_LOG_FILTER_FILE_CMD variable has been temporarily removed due to bug 716636. portage-2.3.90 -------------- * The new PORTAGE_LOG_FILTER_FILE_CMD make.conf(5) variable specifies a command that filters build log output to a log file. In order to filter ANSI escape codes from build logs, ansifilter(1) is a convenient setting for this variable. portage-2.3.80 -------------- * The emerge --quickpkg-direct option enables use of installed packages directly as binary packages. It can be used to create minimal runtime container images (which need not include a package manager), or to enable a live image to act as a binary installer that uses packages installed in the live image as a source of binary packages. This option is especially useful in combination with --usepkgonly and --ignore-soname-deps=n options, allowing implicit system dependencies such as libc to be automatically accounted for. portage-2.3.77 -------------- * The emerge --autounmask option is now disabled by default, except for portions of behavior which are controlled by the --autounmask-use and --autounmask-license options. For backward compatibility, previous behavior of --autounmask=y and --autounmask=n is entirely preserved. Users can get the old behavior simply by adding --autounmask to the make.conf EMERGE_DEFAULT_OPTS variable. portage-2.3.72 -------------- * The glsa-check program is now provided by portage, and it has been removed from gentoolkit. See bug 463952. portage-2.3.70 -------------- * The @live-rebuild package set now searches for PROPERTIES=live, see bug 233589. The @deprecated-live-rebuild package set provides the old behavior which was based on inherited eclasses. portage-2.3.64 -------------- * New (council approved) default locations for the Gentoo repository, distfiles, and binary packages (does not apply to installed systems using the old defaults): /usr/portage -> /var/db/repos/gentoo /usr/portage/distfiles -> /var/cache/distfiles /usr/portage/packages -> /var/cache/binpkgs portage-2.3.53 -------------- * Renamed PORT_LOGDIR and PORT_LOGDIR_CLEAN variables to PORTAGE_LOGDIR and PORTAGE_LOGDIR_CLEAN to match other existing similar variables * Enable FEATURES={ipc,network,pid}-sandbox by default portage-2.3.42 ---------------- * Sync with rsync quarantines data prior to verification, using the rsync --link-dest option (can be disabled by setting "sync-allow-hardlinks = no" in repos.conf). * Sync with git quarantines data prior to verification, see https://wiki.gentoo.org/wiki/Portage_Security#git-mirror_repo. * Sync with shallow git pull is supported, by "setting sync-depth = 1" in repos.conf. portage-2.3.32 ---------------- * EAPI 7 support. portage-2.3.29 ---------------- * Portage API consumers can use asyncio with portage's internal event loop, see portage.util.futures.unix_events.DefaultEventLoopPolicy. portage-2.3.25 ---------------- * Experimental support for EAPI 7_pre1. portage-2.3.20 ---------------- * Support RESTRICT=network-sandbox in ebuilds. portage-2.3.17 ---------------- * The doins ebuild helper has been rewritten in python for performance, and it does in-kernel file copying on Linux. portage-2.3.14 ---------------- * Repository metadata/layout.conf supports manifest-required-hashes attribute (default value is SHA512). portage-2.3.12 ---------------- * better_cache implemented to use less expensive os.listdir() instead of os.stat() operations to scan for ebuilds. Avoids exhaustively scanning overlays for all ebuilds which allows Portage to not slow down significantly with lots of overlays enabled. (Daniel Robbins) portage-2.3.7 ----------------- * eapply_user combines patch basenames from all matched directories into a list, and applies them in POSIX sorted order. This allows patches in more-specific directories to override patches of the same basename found in less-specific directories. An empty patch (or /dev/null symlink) negates a patch with the same basename found in a less-specific directory. * FEATURES=multilib-strict no longer recurses into subdirectories, in order to avoid false-positives. The MULTILIB_STRICT_EXEMPT variable only served to filter false-positives that were triggered by recursion, so it will no longer be needed. * New emerge --autounmask-keep-keywords and --onlydeps-with-rdeps= options. * Set compression method for binpackages via BINPKG_COMPRESS variable * Support for environment variables for git cmd in repos.conf via sync-git-env portage-2.3.5 ----------------- * Numerous patches updating checksums code and python module imports for them including new checksum methods * New linux in kernel movefile support via a new "C" extension module portage-2.3.3 ----------------- * Reverted commits: - Bug 552814 Revert "GitSync.update: respect sync-depth (Shallow fetch is not a practical default at this time, given performance issues introduced by `git update-index` and `git prune` (see bug 599008). ) portage-2.3.1 ----------------- * Support News-Item-Format 2.0 * emerge: add --fuzzy-search and --search-similarity * Add emerge --autounmask-continue option portage-2.3.0 ----------------- * Final release * Includes numerous bugfixes portage-2.3.0_rc1 ----------------- * New split release for the repoman Q/A tool * Includes the stage2 rewite of the repoman code base portage-2.2.26 -------------- * EAPI 6 stable portage release portage-2.2.25 -------------- * EAPI 6 final fully implemented. portage-2.2.22 ------------- * Stage 1 of the repoman re-write code merged in to master branch This is the first release of the new code base. portage-2.2.19 ------------- * The squashdelta sync module was removed for separate installation and development work portage-2.2.19 ------------- * websync module now fully renamed to webrsync * New squashdelta sync module for downloading full or updates for a squasfs tree requires dev-util/squashmerge be installed * New binpkg-multi-instance feature allows for multiple variations (USE settings) to be saved in the pkgdir and index. portage-2.2.16 ------------- * New portage plug-in sync system. Read the news anouncement for more details of the changes in config settings and operation. * New native portage postsync.d capability * New native portage repo.postsync.d capability * New native indexed search capability for decent search speed * Tentative EAPI 6 patches for additional testing portage-2.2.14 ------------- * Remaining bugs in build/install system should be fixed. portge-2.2.14_rc1 ------------- * Many new build/installation system errors fixed. portage-2.2.13 ------------- * New setup.py build system and distutils-r1 ebuild at EAPI 5 * PORTAGE_{BIN,PYM}_PATH variables. If you want to call internal portage tools, you need to query PORTAGE_BIN_PATH and PORTAGE_PYM_PATH, use them and re-export them. * New @changed-deps set to update packages which need dependecy change updates. portage-2.2.12 ------------- * New emaint module "merges" for finding and fixing failed merges If a pkg fails to merge to the live filesystem correctly, that pkg may not work correctly if at all. This module scans the installed pkg database for those failures and can re-emerge those packages. portage-2.2.1 ------------- * Add cgroups, ipc-sandbox, and network-sandbox FEATURES. portage-2.2 ------------- * Add extended set configuration via /etc/portage/sets.conf. See /usr/share/portage/config/sets/portage.conf for examples. portage-2.1.11.20 ------------- * Add support for EAPI 5. Refer to the PMS EAPI Cheat Sheet, portage's html docs installed with USE=doc, or `man 5 ebuild` for more info about EAPI 5. * Add support for FEATURES=preserve-libs which preserves libraries when the sonames change during upgrade or downgrade, and the @preserved-rebuild package set which rebuilds consumers of preserved libraries. * Add link level dependency awareness to emerge --depclean and --prune actions in order to protect against uninstallation of required libraries. Refer to the --depclean-lib-check option in the emerge(1) man page. portage-2.1.11 ------------- * Add support for experimental EAPI "4-slot-abi". Refer to the corresponding html documentation that is installed with USE=doc, and also to the emerge(1) man page for information about the related --ignore-built-slot-operator-deps and --rebuild-if-new-slot options. portage-2.1.10 ------------- * Improve handling of repositories/overlays for cases in which the same ebuild is provided by multiple repositories but with different masking status, and support for repository constraints on atoms (atom::repo) in configuration files. * Add emerge --rebuild-if-* options that trigger rebuilds of reverse dependencies when packages are rebuilt or updated. Related --rebuild-exclude and --rebuild-ignore options can be used to avoid rebuilds for specific packages. * Add emerge --reinstall-atoms, --useoldpkg-atoms, and --usepkg-exclude options which can be used to alter selection rules for specific packages. * Add FEATURES=parallel-install and ebuild-locks, allowing for greater parallelization when installing packages (by using finer-grained locks). portage-2.1.9.27 ------------- * Add support for EAPI 4. Refer to the PMS EAPI Cheat Sheet, portage's html docs installed with USE=doc, or `man 5 ebuild` for more info about EAPI 4. Bug #273620 tracks EAPI 4 implementation in portage. portage-2.1.9 ------------- * There is a new ipc (inter-process communication) USE flag which is enabled by default. This allows portage to communicate with running ebuild processes, for things like best_version, has_version, and die calls in nested processes. This flag should remain enabled unless it is found to be incompatible with a specific profile or environment. When enabled, it fixes bug #278895, bug #315615, and makes subshell die support more robust (so that repoman's ebuild.nesteddie check is irrelevant). portage-2.1.8 ------------- * The top-level __init__.py for the portage python package has been split into many smaller python modules, making the code easier to navigate and allowing small parts of the portage api to be imported with less overhead. portage-2.1.7.17 ------------- * Add support for EAPI 3. This adds support for installation prefix, including new EPREFIX, ED, and EROOT variables which are used by econf and einstall helpers. Also, EAPI 3 adds xz extension support to the unpack helper. portage-2.1.7 ------------- * Add license visibility filtering (GLEP 23) * Add --accept-properties option for emerge which allows you to use --accept-properties=-interactive in order to temporarily exclude interactive updates. * Add support for Python 3.0. At least Python 2.6 is now required in order to support the new syntax which is used by Python 3.0. portage-2.1.6 ------------- * Add support for a new EAPI="2" value. For more information about new EAPI features, refer to the "Ebuild" chapter of the html documentation that is installed with portage. * Add PORTAGE_IONICE_COMMAND setting for make.conf which is called to adjust IO priority on portage and it's subprocesses. * Add emerge --jobs and --load-average options which specify behavior for building packages in parallel or for generating metadata in parallel with emerge --regen. * Add emerge --keep-going option to continue as much as possible after an error. When an error occurs, dependencies are recalculated for remaining packages and any with unsatisfied dependencies are automatically dropped. The --skipfirst option automatically drops packages in the same way, and also drops any masked packages. * Add git and subversion support for repoman. * It is now possible to use `emerge ` to reinstall the package that installed a particular file. Package contents entries are indexed to improve performance. A command such as `emerge /lib/modules` can serve as a decent substitute for module-rebuild. * Namespace sanitizing: move all portage related code into portage.* namespace, rename portage_foo modules to portage.foo (but keep symlinks for compability) * Add support for news items (GLEP 42) * Add FEATURES=protect-owned which is identical to the collision-protect feature except that files may be overwritten if they are not explicitly listed in the contents of a currently installed package. portage-2.1.5 ------------- * For extra careful dependency handling, emerge has a new --complete-graph option that causes it to consider the deep dependencies of all packages from the system and world sets. With this option enabled, emerge will bail out if it determines that the given operation will break any dependencies of the packages that have been added to the graph. Unlike the --deep option, the --complete-graph option does not cause any more packages to be updated than would have otherwise been updated with the option disabled. * Blockers are now resolved automatically in many more cases than before. When it's safe, blocked packages are uninstalled automatically so that users are no longer inconvenienced with the task. Automatically uninstalled packages are displayed in the merge list, marked "uninstall" and highlighted in red. With the --tree option enabled, it's possible to see which package(s) caused other ones to be automatically uninstalled. * The dependency resolver now has a feedback mechanism that helps make atom selections more consistent with previous selections that have been added to the graph. This solves some common cases of bug #1343. portage-2.1.4 ------------- * After the initial setup phase, the original ebuild and eclasses are no longer needed because the same ebuild environment is reused for the entire lifecycle of the package, including uninstallation. * The emerge --search action supports searching of both installed and binary packages The --usepkg and --usepkgonly options control which repositories are searched. portage-2.1.3 ------------- * Allow per-module setting of PORTAGE_ELOG_CLASSES * Add new elog module "echo" to simply display messages when emerge exits * Add ** as new token for package.keywords to bypass the keyword visibility layer * USE_EXPAND variables such as LINGUAS support a * wildcard that will enable all of the corresponding flags that are listed in IUSE for a given package. USE_EXPAND wildcards such as linguas_* are supported in USE and package.use. * The merge process preserves the modification timestamp of files that it installs. The unmerge process will not uninstall files that are claimed by another package in the same slot. * PDEPEND is now installed as soon as possible so that it behaves more like RDEPEND. This makes PDEPEND more useful for breaking the dependency cycles that are sometimes triggered by RDEPEND and DEPEND. * Enable "echo" and "save_summary" elog modules by default * Fix -* handling in package.keywords to work as intended (reset the accepted keywords list), also see RELEASE-NOTES. * Make elog functionality available to python code portage-2.1.2 ------------- * Ebuilds support default USE flags via +flag in IUSE. * New-style virtuals are now usable for packages that depend on themselves for bootstrap. * Profiles support multiple inheritance and package.use. * CONFIG_PROTECT and CONFIG_PROTECT_MASK both support files (not just directories). * Collision protection handles symlinks properly. * Dependencies can be satisfied by installed packages that do not have matching ebuilds in the portage tree or overlay. * Emerge automatically ignores blockers that are made irrelevant by an upgrade. * Emerge supports "reverse blocker detection" which means that the blockers of installed packages will always be respected. * Emerge builds a complete dependency graph in order to ensure correct merge order and detection of circular dependencies. * The world and system sets allow automatic update of all installed slots. * DEPEND atoms support SLOT dependencies of the form ${CATEGORY}/${PN}:${SLOT}. * Development: Extend PYTHONPATH support to allow overriding the hardcoded /usr/lib/portage/pym for development/testing purposes * New "finalize" hook for elog modules enabling modules to perform actions on shutdown (like dispatching collected messages). * New elog modules mail_summary and save_summary that act like the mail/save modules except that they merge messages from multiple packages in a single file/mail. * New QA loglevel and matching eqawarn function * `ebuild foo test` now always runs src_test if available * If DOC_SYMLINK_DIR is set portage installs symlinks to html documention there * FEATURES="test" automatically implies USE="test". portage-2.1.1 ------------- * Profiles support use.force, package.use.force, and package.use.mask files. portage-2.1 (ongoing via pre releases) ------------ * FEATURES="confcache" integration; global caching to speed up configure calls, requires dev-util/confcache * elog framework and accompanying modules for logging ebuild warnings, errors and general notices. Collects eerror/ewarn/elog/einfo messages. * New elog function (should replace einfo in many cases) * version syntax enhancements allowing multiple suffixes and a new 'cvs' version prefix for denoting "live sources" ebuilds. * config files as directories enabling more flexible settings management. * Addition of an register_die_hook method that allows ebuild/eclasses to register functions to be called for better debugging on errors. * Addition of pre and post user hookable functions for each ebuild phase, accessible via portage bashrc. Example would be pre_src_unpack . * cache refactoring- runtime improvement from 35% -> 65%. * Intelligently handle and display USE_EXPAND-based IUSE variables. * FEATURES="parallel-fetch". Download in parallel to compilation. * Include a "changed or new" USE flag output when --verbose isn't specified. * Support for splitting out debug information into separate files in /usr/lib{,32,64}. * exec subsystem refactoring (now with less bugs!) * Added sha256 and rmd160 hashes for digests/manifests * Make --emptytree only apply to ${ROOT} rather than always including /. * Allow packages to be upgraded that are only depended on via a "|| ( =cat/pkg-1* =cat/pkg-2* )" construct. * Ebuild output is no longer cut off early when using PORTAGE_LOGDIR. * Distfiles indirection- $DISTFILES access goes through a tmp dir to fail access to files not listed in SRC_URI. * Emerge now uses --resume to restart itself after portage upgrade. * Atomic file updates via the new atomic_ofstream class. * Global updates and fixpackages performance optimizations. * Tests show that file locking is now more reliable. * A bash call stack is printed when an ebuild dies in ebuild.sh. * New rsync option handling by using a generic PORTAGE_RSYNC_EXTRA_OPTS variable * Manifest2 support that will allow digest-* files to be eliminated from the tree.