#include "allheaders.h"
/* --------------------------------------------*/
#if USE_PSIO /* defined in environ.h */
/* --------------------------------------------*/
/*-------------------------------------------------------------*
* Convert files in a directory to PS *
*-------------------------------------------------------------*/
/*
* \brief convertFilesToPS()
*
* \param[in] dirin input directory
* \param[in] substr [optional] substring filter on filenames; can be NULL
* \param[in] res typ. 300 or 600 ppi
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates a PS file for all image files in a specified
* directory that contain the substr pattern to be matched.
* (2) Each image is written to a separate page in the output PS file.
* (3) All images are written compressed:
* * if tiffg4 --> use ccittg4
* * if jpeg --> use dct
* * all others --> use flate
* If the image is jpeg or tiffg4, we use the existing compressed
* strings for the encoding; otherwise, we read the image into
* a pix and flate-encode the pieces.
* (4) The resolution is often confusing. It is interpreted
* as the resolution of the output display device: "If the
* input image were digitized at 300 ppi, what would it
* look like when displayed at res ppi." So, for example,
* if res = 100 ppi, then the display pixels are 3x larger
* than the 300 ppi pixels, and the image will be rendered
* 3x larger.
* (5) The size of the PostScript file is independent of the resolution,
* because the entire file is encoded. The res parameter just
* tells the PS decomposer how to render the page. Therefore,
* for minimum file size without loss of visual information,
* if the output res is less than 300, you should downscale
* the image to the output resolution before wrapping in PS.
* (6) The "canvas" on which the image is rendered, at the given
* output resolution, is a standard page size (8.5 x 11 in).
*
*/
l_ok
convertFilesToPS(const char *dirin,
const char *substr,
l_int32 res,
const char *fileout)
{
SARRAY *sa;
PROCNAME("convertFilesToPS");
if (!dirin)
return ERROR_INT("dirin not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (res <= 0) {
L_INFO("setting res to 300 ppi\n", procName);
res = 300;
}
if (res < 10 || res > 4000)
L_WARNING("res is typically in the range 300-600 ppi\n", procName);
/* Get all filtered and sorted full pathnames. */
sa = getSortedPathnamesInDirectory(dirin, substr, 0, 0);
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
sarrayConvertFilesToPS(sa, res, fileout);
l_psWriteBoundingBox(TRUE);
sarrayDestroy(&sa);
return 0;
}
/*
* \brief sarrayConvertFilesToPS()
*
* \param[in] sarray of full path names
* \param[in] res typ. 300 or 600 ppi
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) See convertFilesToPS()
*
*/
l_ok
sarrayConvertFilesToPS(SARRAY *sa,
l_int32 res,
const char *fileout)
{
char *fname;
l_int32 i, nfiles, index, ret, format;
PROCNAME("sarrayConvertFilesToPS");
if (!sa)
return ERROR_INT("sa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (res <= 0) {
L_INFO("setting res to 300 ppi\n", procName);
res = 300;
}
if (res < 10 || res > 4000)
L_WARNING("res is typically in the range 300-600 ppi\n", procName);
nfiles = sarrayGetCount(sa);
for (i = 0, index = 0; i < nfiles; i++) {
fname = sarrayGetString(sa, i, L_NOCOPY);
ret = pixReadHeader(fname, &format, NULL, NULL, NULL, NULL, NULL);
if (ret) continue;
if (format == IFF_UNKNOWN)
continue;
writeImageCompressedToPSFile(fname, fileout, res, &index);
}
return 0;
}
/*
* \brief convertFilesFittedToPS()
*
* \param[in] dirin input directory
* \param[in] substr [optional] substring filter on filenames; can be NULL)
* \param[in] xpts desired size in printer points; use 0 for default
* \param[in] ypts desired size in printer points; use 0 for default
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates a PS file for all files in a specified directory
* that contain the substr pattern to be matched.
* (2) Each image is written to a separate page in the output PS file.
* (3) All images are written compressed:
* * if tiffg4 --> use ccittg4
* * if jpeg --> use dct
* * all others --> use flate
* If the image is jpeg or tiffg4, we use the existing compressed
* strings for the encoding; otherwise, we read the image into
* a pix and flate-encode the pieces.
* (4) The resolution is internally determined such that the images
* are rendered, in at least one direction, at 100% of the given
* size in printer points. Use 0.0 for xpts or ypts to get
* the default value, which is 612.0 or 792.0, rsp.
* (5) The size of the PostScript file is independent of the resolution,
* because the entire file is encoded. The %xpts and %ypts
* parameter tells the PS decomposer how to render the page.
*
*/
l_ok
convertFilesFittedToPS(const char *dirin,
const char *substr,
l_float32 xpts,
l_float32 ypts,
const char *fileout)
{
SARRAY *sa;
PROCNAME("convertFilesFittedToPS");
if (!dirin)
return ERROR_INT("dirin not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (xpts <= 0.0) {
L_INFO("setting xpts to 612.0 ppi\n", procName);
xpts = 612.0;
}
if (ypts <= 0.0) {
L_INFO("setting ypts to 792.0 ppi\n", procName);
ypts = 792.0;
}
if (xpts < 100.0 || xpts > 2000.0 || ypts < 100.0 || ypts > 2000.0)
L_WARNING("xpts,ypts are typically in the range 500-800\n", procName);
/* Get all filtered and sorted full pathnames. */
sa = getSortedPathnamesInDirectory(dirin, substr, 0, 0);
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
sarrayConvertFilesFittedToPS(sa, xpts, ypts, fileout);
l_psWriteBoundingBox(TRUE);
sarrayDestroy(&sa);
return 0;
}
/*
* \brief sarrayConvertFilesFittedToPS()
*
* \param[in] sarray of full path names
* \param[in] xpts desired size in printer points; use 0 for default
* \param[in] ypts desired size in printer points; use 0 for default
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) See convertFilesFittedToPS()
*
*/
l_ok
sarrayConvertFilesFittedToPS(SARRAY *sa,
l_float32 xpts,
l_float32 ypts,
const char *fileout)
{
char *fname;
l_int32 ret, i, w, h, nfiles, index, format, res;
PROCNAME("sarrayConvertFilesFittedToPS");
if (!sa)
return ERROR_INT("sa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (xpts <= 0.0) {
L_INFO("setting xpts to 612.0\n", procName);
xpts = 612.0;
}
if (ypts <= 0.0) {
L_INFO("setting ypts to 792.0\n", procName);
ypts = 792.0;
}
if (xpts < 100.0 || xpts > 2000.0 || ypts < 100.0 || ypts > 2000.0)
L_WARNING("xpts,ypts are typically in the range 500-800\n", procName);
nfiles = sarrayGetCount(sa);
for (i = 0, index = 0; i < nfiles; i++) {
fname = sarrayGetString(sa, i, L_NOCOPY);
ret = pixReadHeader(fname, &format, &w, &h, NULL, NULL, NULL);
if (ret) continue;
if (format == IFF_UNKNOWN)
continue;
/* Be sure the entire image is wrapped */
if (xpts * h < ypts * w)
res = (l_int32)((l_float32)w * 72.0 / xpts);
else
res = (l_int32)((l_float32)h * 72.0 / ypts);
writeImageCompressedToPSFile(fname, fileout, res, &index);
}
return 0;
}
/*
* \brief writeImageCompressedToPSFile()
*
* \param[in] filein input image file
* \param[in] fileout output ps file
* \param[in] res output printer resolution
* \param[in,out] pindex index of image in output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This wraps a single page image in PS.
* (2) The input file can be in any format. It is compressed as follows:
* * if in tiffg4 --> use ccittg4
* * if in jpeg --> use dct
* * all others --> use flate
* (3) Before the first call, set %index = 0. %index is incremented
* if the page is successfully written. It is used to decide
* whether to write (index == 0) or append (index > 0) to the file.
*
*/
l_ok
writeImageCompressedToPSFile(const char *filein,
const char *fileout,
l_int32 res,
l_int32 *pindex)
{
const char *op;
l_int32 format, retval;
PROCNAME("writeImageCompressedToPSFile");
if (!pindex)
return ERROR_INT("&index not defined", procName, 1);
findFileFormat(filein, &format);
if (format == IFF_UNKNOWN) {
L_ERROR("format of %s not known\n", procName, filein);
return 1;
}
op = (*pindex == 0) ? "w" : "a";
if (format == IFF_JFIF_JPEG) {
retval = convertJpegToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, TRUE);
} else if (format == IFF_TIFF_G4) {
retval = convertG4ToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, FALSE, TRUE);
} else { /* all other image formats */
retval = convertFlateToPS(filein, fileout, op, 0, 0,
res, 1.0, *pindex + 1, TRUE);
}
if (retval == 0) (*pindex)++;
return retval;
}
/*-------------------------------------------------------------*
* Convert mixed text/image files to PS *
*-------------------------------------------------------------*/
/*
* \brief convertSegmentedPagesToPS()
*
* \param[in] pagedir input page image directory
* \param[in] pagestr [optional] substring filter on page filenames;
* can be NULL
* \param[in] page_numpre number of characters in page name before number
* \param[in] maskdir input mask image directory
* \param[in] maskstr [optional] substring filter on mask filenames;
* can be NULL
* \param[in] mask_numpre number of characters in mask name before number
* \param[in] numpost number of characters in names after number
* \param[in] maxnum only consider page numbers up to this value
* \param[in] textscale scale of text output relative to pixs
* \param[in] imagescale scale of image output relative to pixs
* \param[in] threshold for binarization; typ. about 190; 0 for default
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates a PS file for all page image and mask files in two
* specified directories and that contain the page numbers as
* specified below. The two directories can be the same, in which
* case the page and mask files are differentiated by the two
* substrings for string matches.
* (2) The page images are taken in lexicographic order.
* Mask images whose numbers match the page images are used to
* segment the page images. Page images without a matching
* mask image are scaled, thresholded and rendered entirely as text.
* (3) Each PS page is generated as a compressed representation of
* the page image, where the part of the image under the mask
* is suitably scaled and compressed as DCT (i.e., jpeg), and
* the remaining part of the page is suitably scaled, thresholded,
* compressed as G4 (i.e., tiff g4), and rendered by painting
* black through the resulting text mask.
* (4) The scaling is typically 2x down for the DCT component
* (%imagescale = 0.5) and 2x up for the G4 component
* (%textscale = 2.0).
* (5) The resolution is automatically set to fit to a
* letter-size (8.5 x 11 inch) page.
* (6) Both the DCT and the G4 encoding are PostScript level 2.
* (7) It is assumed that the page number is contained within
* the basename (the filename without directory or extension).
* %page_numpre is the number of characters in the page basename
* preceding the actual page number; %mask_numpre is likewise for
* the mask basename; %numpost is the number of characters
* following the page number. For example, for mask name
* mask_006.tif, mask_numpre = 5 ("mask_).
* (8) To render a page as is -- that is, with no thresholding
* of any pixels -- use a mask in the mask directory that is
* full size with all pixels set to 1. If the page is 1 bpp,
* it is not necessary to have a mask.
*
*/
l_ok
convertSegmentedPagesToPS(const char *pagedir,
const char *pagestr,
l_int32 page_numpre,
const char *maskdir,
const char *maskstr,
l_int32 mask_numpre,
l_int32 numpost,
l_int32 maxnum,
l_float32 textscale,
l_float32 imagescale,
l_int32 threshold,
const char *fileout)
{
l_int32 pageno, i, npages;
PIX *pixs, *pixm;
SARRAY *sapage, *samask;
PROCNAME("convertSegmentedPagesToPS");
if (!pagedir)
return ERROR_INT("pagedir not defined", procName, 1);
if (!maskdir)
return ERROR_INT("maskdir not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (threshold <= 0) {
L_INFO("setting threshold to 190\n", procName);
threshold = 190;
}
/* Get numbered full pathnames; max size of sarray is maxnum */
sapage = getNumberedPathnamesInDirectory(pagedir, pagestr,
page_numpre, numpost, maxnum);
samask = getNumberedPathnamesInDirectory(maskdir, maskstr,
mask_numpre, numpost, maxnum);
sarrayPadToSameSize(sapage, samask, "");
if ((npages = sarrayGetCount(sapage)) == 0) {
sarrayDestroy(&sapage);
sarrayDestroy(&samask);
return ERROR_INT("no matching pages found", procName, 1);
}
/* Generate the PS file */
pageno = 1;
for (i = 0; i < npages; i++) {
if ((pixs = pixReadIndexed(sapage, i)) == NULL)
continue;
pixm = pixReadIndexed(samask, i);
pixWriteSegmentedPageToPS(pixs, pixm, textscale, imagescale,
threshold, pageno, fileout);
pixDestroy(&pixs);
pixDestroy(&pixm);
pageno++;
}
sarrayDestroy(&sapage);
sarrayDestroy(&samask);
return 0;
}
/*
* \brief pixWriteSegmentedPageToPS()
*
* \param[in] pixs all depths; colormap ok
* \param[in] pixm [optional] 1 bpp segmentation mask over image region
* \param[in] textscale scale of text output relative to pixs
* \param[in] imagescale scale of image output relative to pixs
* \param[in] threshold for binarization; typ. about 190; 0 for default
* \param[in] pageno page number in set; use 1 for new output file
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates the PS string for a mixed text/image page,
* and adds it to an existing file if %pageno > 1.
* The PS output is determined by fitting the result to
* a letter-size (8.5 x 11 inch) page.
* (2) The two images (pixs and pixm) are at the same resolution
* (typically 300 ppi). They are used to generate two compressed
* images, pixb and pixc, that are put directly into the output
* PS file.
* (3) pixb is the text component. In the PostScript world, we think of
* it as a mask through which we paint black. It is produced by
* scaling pixs by %textscale, and thresholding to 1 bpp.
* (4) pixc is the image component, which is that part of pixs under
* the mask pixm. It is scaled from pixs by %imagescale.
* (5) Typical values are textscale = 2.0 and imagescale = 0.5.
* (6) If pixm == NULL, the page has only text. If it is all black,
* the page is all image and has no text.
* (7) This can be used to write a multi-page PS file, by using
* sequential page numbers with the same output file. It can
* also be used to write separate PS files for each page,
* by using different output files with %pageno = 0 or 1.
*
*/
l_ok
pixWriteSegmentedPageToPS(PIX *pixs,
PIX *pixm,
l_float32 textscale,
l_float32 imagescale,
l_int32 threshold,
l_int32 pageno,
const char *fileout)
{
l_int32 alltext, notext, d, ret;
l_uint32 val;
l_float32 scaleratio;
PIX *pixmi, *pixmis, *pixt, *pixg, *pixsc, *pixb, *pixc;
PROCNAME("pixWriteSegmentedPageToPS");
if (!pixs)
return ERROR_INT("pixs not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (imagescale <= 0.0 || textscale <= 0.0)
return ERROR_INT("relative scales must be > 0.0", procName, 1);
/* Analyze the page. Determine the ratio by which the
* binary text mask is scaled relative to the image part.
* If there is no image region (alltext == TRUE), the
* text mask will be rendered directly to fit the page,
* and scaleratio = 1.0. */
alltext = TRUE;
notext = FALSE;
scaleratio = 1.0;
if (pixm) {
pixZero(pixm, &alltext); /* pixm empty: all text */
if (alltext) {
pixm = NULL; /* treat it as not existing here */
} else {
pixmi = pixInvert(NULL, pixm);
pixZero(pixmi, ¬ext); /* pixm full; no text */
pixDestroy(&pixmi);
scaleratio = textscale / imagescale;
}
}
if (pixGetDepth(pixs) == 1) { /* render tiff g4 */
pixb = pixClone(pixs);
pixc = NULL;
} else {
pixt = pixConvertTo8Or32(pixs, L_CLONE, 0); /* clone if possible */
/* Get the binary text mask. Note that pixg cannot be a
* clone of pixs, because it may be altered by pixSetMasked(). */
pixb = NULL;
if (notext == FALSE) {
d = pixGetDepth(pixt);
if (d == 8)
pixg = pixCopy(NULL, pixt);
else /* d == 32 */
pixg = pixConvertRGBToLuminance(pixt);
if (pixm) /* clear out the image parts */
pixSetMasked(pixg, pixm, 255);
if (textscale == 1.0)
pixsc = pixClone(pixg);
else if (textscale >= 0.7)
pixsc = pixScaleGrayLI(pixg, textscale, textscale);
else
pixsc = pixScaleAreaMap(pixg, textscale, textscale);
pixb = pixThresholdToBinary(pixsc, threshold);
pixDestroy(&pixg);
pixDestroy(&pixsc);
}
/* Get the scaled image region */
pixc = NULL;
if (pixm) {
if (imagescale == 1.0)
pixsc = pixClone(pixt); /* can possibly be a clone of pixs */
else
pixsc = pixScale(pixt, imagescale, imagescale);
/* If pixm is not full, clear the pixels in pixsc
* corresponding to bg in pixm, where there can be text
* that is written through the mask pixb. Note that
* we could skip this and use pixsc directly in
* pixWriteMixedToPS(); however, clearing these
* non-image regions to a white background will reduce
* the size of pixc (relative to pixsc), and hence
* reduce the size of the PS file that is generated.
* Use a copy so that we don't accidentally alter pixs. */
if (notext == FALSE) {
pixmis = pixScale(pixm, imagescale, imagescale);
pixmi = pixInvert(NULL, pixmis);
val = (d == 8) ? 0xff : 0xffffff00;
pixc = pixCopy(NULL, pixsc);
pixSetMasked(pixc, pixmi, val); /* clear non-image part */
pixDestroy(&pixmis);
pixDestroy(&pixmi);
} else {
pixc = pixClone(pixsc);
}
pixDestroy(&pixsc);
}
pixDestroy(&pixt);
}
/* Generate the PS file. Don't use bounding boxes. */
l_psWriteBoundingBox(FALSE);
ret = pixWriteMixedToPS(pixb, pixc, scaleratio, pageno, fileout);
l_psWriteBoundingBox(TRUE);
pixDestroy(&pixb);
pixDestroy(&pixc);
return ret;
}
/*
* \brief pixWriteMixedToPS()
*
* \param[in] pixb [optional] 1 bpp mask; typically for text
* \param[in] pixc [optional] 8 or 32 bpp image regions
* \param[in] scale scale factor for rendering pixb, relative to pixc;
* typ. 4.0
* \param[in] pageno page number in set; use 1 for new output file
* \param[in] fileout output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This low level function generates the PS string for a mixed
* text/image page, and adds it to an existing file if
* %pageno > 1.
* (2) The two images (pixb and pixc) are typically generated at the
* resolution that they will be rendered in the PS file.
* (3) pixb is the text component. In the PostScript world, we think of
* it as a mask through which we paint black.
* (4) pixc is the (typically halftone) image component. It is
* white in the rest of the page. To minimize the size of the
* PS file, it should be rendered at a resolution that is at
* least equal to its actual resolution.
* (5) %scale gives the ratio of resolution of pixb to pixc.
* Typical resolutions are: 600 ppi for pixb, 150 ppi for pixc;
* so %scale = 4.0. If one of the images is not defined,
* the value of %scale is ignored.
* (6) We write pixc with DCT compression (jpeg). This is followed
* by painting the text as black through the mask pixb. If
* pixc doesn't exist (alltext), we write the text with the
* PS "image" operator instead of the "imagemask" operator,
* because ghostscript's ps2pdf is flaky when the latter is used.
* (7) The actual output resolution is determined by fitting the
* result to a letter-size (8.5 x 11 inch) page.
*
*/
l_ok
pixWriteMixedToPS(PIX *pixb,
PIX *pixc,
l_float32 scale,
l_int32 pageno,
const char *fileout)
{
char *tname;
const char *op;
l_int32 resb, resc, endpage, maskop, ret;
PROCNAME("pixWriteMixedToPS");
if (!pixb && !pixc)
return ERROR_INT("pixb and pixc both undefined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
/* Compute the resolution that fills a letter-size page. */
if (!pixc) {
resb = getResLetterPage(pixGetWidth(pixb), pixGetHeight(pixb), 0);
} else {
resc = getResLetterPage(pixGetWidth(pixc), pixGetHeight(pixc), 0);
if (pixb)
resb = (l_int32)(scale * resc);
}
/* Write the jpeg image first */
if (pixc) {
tname = l_makeTempFilename();
pixWrite(tname, pixc, IFF_JFIF_JPEG);
endpage = (pixb) ? FALSE : TRUE;
op = (pageno <= 1) ? "w" : "a";
ret = convertJpegToPS(tname, fileout, op, 0, 0, resc, 1.0,
pageno, endpage);
lept_rmfile(tname);
LEPT_FREE(tname);
if (ret)
return ERROR_INT("jpeg data not written", procName, 1);
}
/* Write the binary data, either directly or, if there is
* a jpeg image on the page, through the mask. */
if (pixb) {
tname = l_makeTempFilename();
pixWrite(tname, pixb, IFF_TIFF_G4);
op = (pageno <= 1 && !pixc) ? "w" : "a";
maskop = (pixc) ? 1 : 0;
ret = convertG4ToPS(tname, fileout, op, 0, 0, resb, 1.0,
pageno, maskop, 1);
lept_rmfile(tname);
LEPT_FREE(tname);
if (ret)
return ERROR_INT("tiff data not written", procName, 1);
}
return 0;
}
/*-------------------------------------------------------------*
* Convert any image file to PS for embedding *
*-------------------------------------------------------------*/
/*
* \brief convertToPSEmbed()
*
* \param[in] filein input image file, any format
* \param[in] fileout output ps file
* \param[in] level PostScript compression: 1 (uncompressed), 2 or 3
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This is a wrapper function that generates a PS file with
* a bounding box, from any input image file.
* (2) Do the best job of compression given the specified level.
* %level=3 does flate compression on anything that is not
* tiffg4 (1 bpp) or jpeg (8 bpp or rgb).
* (3) If %level=2 and the file is not tiffg4 or jpeg, it will
* first be written to file as jpeg with quality = 75.
* This will remove the colormap and cause some degradation
* in the image.
* (4) The bounding box is required when a program such as TeX
* (through epsf) places and rescales the image. It is
* sized for fitting the image to an 8.5 x 11.0 inch page.
*
*/
l_ok
convertToPSEmbed(const char *filein,
const char *fileout,
l_int32 level)
{
char *tname;
l_int32 d, format;
PIX *pix, *pixs;
PROCNAME("convertToPSEmbed");
if (!filein)
return ERROR_INT("filein not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (level != 1 && level != 2 && level != 3) {
L_ERROR("invalid level specified; using level 2\n", procName);
level = 2;
}
if (level == 1) { /* no compression */
pixWritePSEmbed(filein, fileout);
return 0;
}
/* Find the format and write out directly if in jpeg or tiff g4 */
findFileFormat(filein, &format);
if (format == IFF_JFIF_JPEG) {
convertJpegToPSEmbed(filein, fileout);
return 0;
} else if (format == IFF_TIFF_G4) {
convertG4ToPSEmbed(filein, fileout);
return 0;
} else if (format == IFF_UNKNOWN) {
L_ERROR("format of %s not known\n", procName, filein);
return 1;
}
/* If level 3, flate encode. */
if (level == 3) {
convertFlateToPSEmbed(filein, fileout);
return 0;
}
/* OK, it's level 2, so we must convert to jpeg or tiff g4 */
if ((pixs = pixRead(filein)) == NULL)
return ERROR_INT("image not read from file", procName, 1);
d = pixGetDepth(pixs);
if ((d == 2 || d == 4) && !pixGetColormap(pixs))
pix = pixConvertTo8(pixs, 0);
else if (d == 16)
pix = pixConvert16To8(pixs, L_MS_BYTE);
else
pix = pixRemoveColormap(pixs, REMOVE_CMAP_BASED_ON_SRC);
pixDestroy(&pixs);
if (!pix)
return ERROR_INT("converted pix not made", procName, 1);
d = pixGetDepth(pix);
tname = l_makeTempFilename();
if (d == 1) {
if (pixWrite(tname, pix, IFF_TIFF_G4)) {
LEPT_FREE(tname);
pixDestroy(&pix);
return ERROR_INT("g4 tiff not written", procName, 1);
}
convertG4ToPSEmbed(tname, fileout);
} else {
if (pixWrite(tname, pix, IFF_JFIF_JPEG)) {
LEPT_FREE(tname);
pixDestroy(&pix);
return ERROR_INT("jpeg not written", procName, 1);
}
convertJpegToPSEmbed(tname, fileout);
}
lept_rmfile(tname);
LEPT_FREE(tname);
pixDestroy(&pix);
return 0;
}
/*-------------------------------------------------------------*
* Write all images in a pixa out to PS *
*-------------------------------------------------------------*/
/*
* \brief pixaWriteCompressedToPS()
*
* \param[in] pixa any set of images
* \param[in] fileout output ps file
* \param[in] res resolution for the set of input images
* \param[in] level PostScript compression capability: 2 or 3
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates a PostScript file of multiple page images,
* all with bounding boxes.
* (2) See pixWriteCompressedToPS() for details.
* (3) To generate a pdf from %fileout, use:
* ps2pdf
*
*/
l_ok
pixaWriteCompressedToPS(PIXA *pixa,
const char *fileout,
l_int32 res,
l_int32 level)
{
l_int32 i, n, index, ret;
PIX *pix;
PROCNAME("pixaWriteCompressedToPS");
if (!pixa)
return ERROR_INT("pixa not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (level != 2 && level != 3) {
L_ERROR("only levels 2 and 3 permitted; using level 2\n", procName);
level = 2;
}
index = 0;
n = pixaGetCount(pixa);
for (i = 0; i < n; i++) {
pix = pixaGetPix(pixa, i, L_CLONE);
ret = pixWriteCompressedToPS(pix, fileout, res, level, &index);
if (ret) L_ERROR("PS string not written for image %d\n", procName, i);
pixDestroy(&pix);
}
return 0;
}
/*
* \brief pixWriteCompressedToPS()
*
* \param[in] pix any depth; colormap OK
* \param[in] fileout output ps file
* \param[in] res of input image
* \param[in] level PostScript compression capability: 2 or 3
* \param[in,out] pindex index of image in output ps file
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This generates a PostScript string for %pix, and writes it
* to a file, with a bounding box.
* (2) *pindex keeps track of the number of images that have been
* written to %fileout. If this is the first image to be
* converted, set *pindex == 0 before passing it in. If the
* PostScript string is successfully generated, this will increment
* *pindex. If *pindex > 0, the PostScript string will be
* appended to %fileout.
* (3) PostScript level 2 enables lossless tiffg4 and lossy jpeg
* compression. Level 3 adds lossless flate (essentially gzip)
* compression.
* * For images with a colormap, lossless flate is often better in
* both quality and size than jpeg.
* * The decision for images without a colormap affects compression
* efficiency: %level2 (jpeg) is usually better than %level3 (flate)
* * Because jpeg does not handle 16 bpp, if %level == 2, the image
* is converted to 8 bpp (using MSB) and compressed with jpeg,
* cmap + level2: jpeg
* cmap + level3: flate
* 1 bpp: tiffg4
* 2 or 4 bpp + level2: jpeg
* 2 or 4 bpp + level3: flate
* 8 bpp + level2: jpeg
* 8 bpp + level3: flate
* 16 bpp + level2: jpeg [converted to 8 bpp, with warning]
* 16 bpp + level3: flate
* 32 bpp + level2: jpeg
* 32 bpp + level3: flate
*
*/
l_ok
pixWriteCompressedToPS(PIX *pix,
const char *fileout,
l_int32 res,
l_int32 level,
l_int32 *pindex)
{
char *tname;
l_int32 writeout, d;
PIX *pixt;
PIXCMAP *cmap;
PROCNAME("pixWriteCompressedToPS");
if (!pix)
return ERROR_INT("pix not defined", procName, 1);
if (!fileout)
return ERROR_INT("fileout not defined", procName, 1);
if (level != 2 && level != 3) {
L_ERROR("only levels 2 and 3 permitted; using level 2\n", procName);
level = 2;
}
if (!pindex)
return ERROR_INT("&index not defined", procName, 1);
tname = l_makeTempFilename();
writeout = TRUE;
d = pixGetDepth(pix);
cmap = pixGetColormap(pix);
if (d == 1) {
if (pixWrite(tname, pix, IFF_TIFF_G4))
writeout = FALSE;
} else if (level == 3) {
if (pixWrite(tname, pix, IFF_PNG))
writeout = FALSE;
} else { /* level == 2 */
if (cmap) {
pixt = pixConvertForPSWrap(pix);
if (pixWrite(tname, pixt, IFF_JFIF_JPEG))
writeout = FALSE;
pixDestroy(&pixt);
} else if (d == 16) {
L_WARNING("d = 16; converting to 8 bpp for jpeg\n", procName);
pixt = pixConvert16To8(pix, L_MS_BYTE);
if (pixWrite(tname, pixt, IFF_JFIF_JPEG))
writeout = FALSE;
pixDestroy(&pixt);
} else if (d == 2 || d == 4) {
pixt = pixConvertTo8(pix, 0);
if (pixWrite(tname, pixt, IFF_JFIF_JPEG))
writeout = FALSE;
pixDestroy(&pixt);
} else if (d == 8 || d == 32) {
if (pixWrite(tname, pix, IFF_JFIF_JPEG))
writeout = FALSE;
} else { /* shouldn't happen */
L_ERROR("invalid depth with level 2: %d\n", procName, d);
writeout = FALSE;
}
}
if (writeout)
writeImageCompressedToPSFile(tname, fileout, res, pindex);
if (lept_rmfile(tname) != 0)
L_ERROR("temp file %s was not deleted\n", procName, tname);
LEPT_FREE(tname);
return (writeout) ? 0 : 1;
}
/* --------------------------------------------*/
#endif /* USE_PSIO */
/* --------------------------------------------*/