#include "allheaders.h"
struct L_Pixel
{
l_int32 x;
l_int32 y;
};
typedef struct L_Pixel L_PIXEL;
static void seedfillBinaryLow(l_uint32 *datas, l_int32 hs, l_int32 wpls,
l_uint32 *datam, l_int32 hm, l_int32 wplm,
l_int32 connectivity);
static void seedfillGrayLow(l_uint32 *datas, l_int32 w, l_int32 h,
l_int32 wpls, l_uint32 *datam, l_int32 wplm,
l_int32 connectivity);
static void seedfillGrayInvLow(l_uint32 *datas, l_int32 w, l_int32 h,
l_int32 wpls, l_uint32 *datam, l_int32 wplm,
l_int32 connectivity);
static void seedfillGrayLowSimple(l_uint32 *datas, l_int32 w, l_int32 h,
l_int32 wpls, l_uint32 *datam, l_int32 wplm,
l_int32 connectivity);
static void seedfillGrayInvLowSimple(l_uint32 *datas, l_int32 w, l_int32 h,
l_int32 wpls, l_uint32 *datam,
l_int32 wplm, l_int32 connectivity);
static void distanceFunctionLow(l_uint32 *datad, l_int32 w, l_int32 h,
l_int32 d, l_int32 wpld, l_int32 connectivity);
static void seedspreadLow(l_uint32 *datad, l_int32 w, l_int32 h, l_int32 wpld,
l_uint32 *datat, l_int32 wplt, l_int32 connectivity);
static l_int32 pixQualifyLocalMinima(PIX *pixs, PIX *pixm, l_int32 maxval);
#ifndef NO_CONSOLE_IO
#define DEBUG_PRINT_ITERS 0
#endif /* ~NO_CONSOLE_IO */
/* Two-way (UL --> LR, LR --> UL) sweep iterations; typically need only 4 */
static const l_int32 MaxIters = 40;
/*-----------------------------------------------------------------------*
* Vincent's Iterative Binary Seedfill method *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSeedfillBinary()
*
* \param[in] pixd [optional]; can be null, equal to pixs,
* or different from pixs; 1 bpp
* \param[in] pixs 1 bpp seed
* \param[in] pixm 1 bpp filling mask
* \param[in] connectivity 4 or 8
* \return pixd always
*
*
* Notes:
* (1) This is for binary seedfill (aka "binary reconstruction").
* (2) There are 3 cases:
* (a) pixd == null (make a new pixd)
* (b) pixd == pixs (in-place)
* (c) pixd != pixs
* (3) If you know the case, use these patterns for clarity:
* (a) pixd = pixSeedfillBinary(NULL, pixs, ...);
* (b) pixSeedfillBinary(pixs, pixs, ...);
* (c) pixSeedfillBinary(pixd, pixs, ...);
* (4) The resulting pixd contains the filled seed. For some
* applications you want to OR it with the inverse of
* the filling mask.
* (5) The input seed and mask images can be different sizes, but
* in typical use the difference, if any, would be only
* a few pixels in each direction. If the sizes differ,
* the clipping is handled by the low-level function
* seedfillBinaryLow().
*
*/
PIX *
pixSeedfillBinary(PIX *pixd,
PIX *pixs,
PIX *pixm,
l_int32 connectivity)
{
l_int32 i, boolval;
l_int32 hd, hm, wpld, wplm;
l_uint32 *datad, *datam;
PIX *pixt;
PROCNAME("pixSeedfillBinary");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, pixd);
if (!pixm || pixGetDepth(pixm) != 1)
return (PIX *)ERROR_PTR("pixm undefined or not 1 bpp", procName, pixd);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not in {4,8}", procName, pixd);
/* Prepare pixd as a copy of pixs if not identical */
if ((pixd = pixCopy(pixd, pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
pixSetPadBits(pixd, 0); /* be safe: */
pixSetPadBits(pixm, 0); /* avoid using uninitialized memory */
/* pixt is used to test for completion */
if ((pixt = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixt not made", procName, pixd);
hd = pixGetHeight(pixd);
hm = pixGetHeight(pixm); /* included so seedfillBinaryLow() can clip */
datad = pixGetData(pixd);
datam = pixGetData(pixm);
wpld = pixGetWpl(pixd);
wplm = pixGetWpl(pixm);
for (i = 0; i < MaxIters; i++) {
pixCopy(pixt, pixd);
seedfillBinaryLow(datad, hd, wpld, datam, hm, wplm, connectivity);
pixEqual(pixd, pixt, &boolval);
if (boolval == 1) {
#if DEBUG_PRINT_ITERS
lept_stderr("Binary seed fill converged: %d iters\n", i + 1);
#endif /* DEBUG_PRINT_ITERS */
break;
}
}
pixDestroy(&pixt);
return pixd;
}
/*!
* \brief pixSeedfillBinaryRestricted()
*
* \param[in] pixd [optional]; can be null, equal to pixs,
* or different from pixs; 1 bpp
* \param[in] pixs 1 bpp seed
* \param[in] pixm 1 bpp filling mask
* \param[in] connectivity 4 or 8
* \param[in] xmax max distance in x direction of fill into mask
* \param[in] ymax max distance in y direction of fill into mask
* \return pixd always
*
*
* Notes:
* (1) See usage for pixSeedfillBinary(), which has unrestricted fill.
* In pixSeedfillBinary(), the filling distance is unrestricted
* and can be larger than pixs, depending on the topology of
* th mask.
* (2) There are occasions where it is useful not to permit the
* fill to go more than a certain distance into the mask.
* %xmax specifies the maximum horizontal distance allowed
* in the fill; %ymax does likewise in the vertical direction.
* (3) Operationally, the max "distance" allowed for the fill
* is a linear distance from the original seed, independent
* of the actual mask topology.
* (4) Another formulation of this problem, not implemented,
* would use the manhattan distance from the seed, as
* determined by a breadth-first search starting at the seed
* boundaries and working outward where the mask fg allows.
* How this might use the constraints of separate xmax and ymax
* is not clear.
*
*/
PIX *
pixSeedfillBinaryRestricted(PIX *pixd,
PIX *pixs,
PIX *pixm,
l_int32 connectivity,
l_int32 xmax,
l_int32 ymax)
{
l_int32 w, h;
PIX *pix1, *pix2;
PROCNAME("pixSeedfillBinaryRestricted");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, pixd);
if (!pixm || pixGetDepth(pixm) != 1)
return (PIX *)ERROR_PTR("pixm undefined or not 1 bpp", procName, pixd);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not in {4,8}", procName, pixd);
if (xmax == 0 && ymax == 0) /* no filling permitted */
return pixClone(pixs);
if (xmax < 0 || ymax < 0) {
L_ERROR("xmax and ymax must be non-negative", procName);
return pixClone(pixs);
}
/* Full fill from the seed into the mask. */
if ((pix1 = pixSeedfillBinary(NULL, pixs, pixm, connectivity)) == NULL)
return (PIX *)ERROR_PTR("pix1 not made", procName, pixd);
/* Dilate the seed. This gives the maximal region where changes
* are permitted. Invert to get the region where pixs is
* not allowed to change. */
pix2 = pixDilateCompBrick(NULL, pixs, 2 * xmax + 1, 2 * ymax + 1);
pixInvert(pix2, pix2);
/* Blank the region of pix1 specified by the fg of pix2.
* This is not yet the final result, because it may have fg pixels
* that are not accessible from the seed in the restricted distance.
* For example, such pixels may be connected to the original seed,
* but through a path that goes outside the permitted region. */
pixGetDimensions(pixs, &w, &h, NULL);
pixRasterop(pix1, 0, 0, w, h, PIX_DST & PIX_NOT(PIX_SRC), pix2, 0, 0);
/* To get the accessible pixels in the restricted region, do
* a second seedfill from the original seed, using pix1 as
* a mask. The result, in pixd, will not have any bad fg
* pixels that were in pix1. */
pixd = pixSeedfillBinary(pixd, pixs, pix1, connectivity);
pixDestroy(&pix1);
pixDestroy(&pix2);
return pixd;
}
/*!
* \brief seedfillBinaryLow()
*
* Notes:
* (1) This is an in-place fill, where the seed image is
* filled, clipping to the filling mask, in one full
* cycle of UL -> LR and LR -> UL raster scans.
* (2) Assume the mask is a filling mask, not a blocking mask.
* (3) Assume that the RHS pad bits of the mask
* are properly set to 0.
* (4) Clip to the smallest dimensions to avoid invalid reads.
*/
static void
seedfillBinaryLow(l_uint32 *datas,
l_int32 hs,
l_int32 wpls,
l_uint32 *datam,
l_int32 hm,
l_int32 wplm,
l_int32 connectivity)
{
l_int32 i, j, h, wpl;
l_uint32 word, mask;
l_uint32 wordabove, wordleft, wordbelow, wordright;
l_uint32 wordprev; /* test against this in previous iteration */
l_uint32 *lines, *linem;
PROCNAME("seedfillBinaryLow");
h = L_MIN(hs, hm);
wpl = L_MIN(wpls, wplm);
switch (connectivity)
{
case 4:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < wpl; j++) {
word = *(lines + j);
mask = *(linem + j);
/* OR from word above and from word to left; mask */
if (i > 0) {
wordabove = *(lines - wpls + j);
word |= wordabove;
}
if (j > 0) {
wordleft = *(lines + j - 1);
word |= wordleft << 31;
}
word &= mask;
/* No need to fill horizontally? */
if (!word || !(~word)) {
*(lines + j) = word;
continue;
}
while (1) {
wordprev = word;
word = (word | (word >> 1) | (word << 1)) & mask;
if ((word ^ wordprev) == 0) {
*(lines + j) = word;
break;
}
}
}
}
/* LR --> UL scan */
for (i = h - 1; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = wpl - 1; j >= 0; j--) {
word = *(lines + j);
mask = *(linem + j);
/* OR from word below and from word to right; mask */
if (i < h - 1) {
wordbelow = *(lines + wpls + j);
word |= wordbelow;
}
if (j < wpl - 1) {
wordright = *(lines + j + 1);
word |= wordright >> 31;
}
word &= mask;
/* No need to fill horizontally? */
if (!word || !(~word)) {
*(lines + j) = word;
continue;
}
while (1) {
wordprev = word;
word = (word | (word >> 1) | (word << 1)) & mask;
if ((word ^ wordprev) == 0) {
*(lines + j) = word;
break;
}
}
}
}
break;
case 8:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < wpl; j++) {
word = *(lines + j);
mask = *(linem + j);
/* OR from words above and from word to left; mask */
if (i > 0) {
wordabove = *(lines - wpls + j);
word |= (wordabove | (wordabove << 1) | (wordabove >> 1));
if (j > 0)
word |= (*(lines - wpls + j - 1)) << 31;
if (j < wpl - 1)
word |= (*(lines - wpls + j + 1)) >> 31;
}
if (j > 0) {
wordleft = *(lines + j - 1);
word |= wordleft << 31;
}
word &= mask;
/* No need to fill horizontally? */
if (!word || !(~word)) {
*(lines + j) = word;
continue;
}
while (1) {
wordprev = word;
word = (word | (word >> 1) | (word << 1)) & mask;
if ((word ^ wordprev) == 0) {
*(lines + j) = word;
break;
}
}
}
}
/* LR --> UL scan */
for (i = h - 1; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = wpl - 1; j >= 0; j--) {
word = *(lines + j);
mask = *(linem + j);
/* OR from words below and from word to right; mask */
if (i < h - 1) {
wordbelow = *(lines + wpls + j);
word |= (wordbelow | (wordbelow << 1) | (wordbelow >> 1));
if (j > 0)
word |= (*(lines + wpls + j - 1)) << 31;
if (j < wpl - 1)
word |= (*(lines + wpls + j + 1)) >> 31;
}
if (j < wpl - 1) {
wordright = *(lines + j + 1);
word |= wordright >> 31;
}
word &= mask;
/* No need to fill horizontally? */
if (!word || !(~word)) {
*(lines + j) = word;
continue;
}
while (1) {
wordprev = word;
word = (word | (word >> 1) | (word << 1)) & mask;
if ((word ^ wordprev) == 0) {
*(lines + j) = word;
break;
}
}
}
}
break;
default:
L_ERROR("connectivity must be 4 or 8\n", procName);
}
}
/*!
* \brief pixHolesByFilling()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity 4 or 8
* \return pixd inverted image of all holes, or NULL on error
*
* Action:
* 1 Start with 1-pixel black border on otherwise white pixd
* 2 Use the inverted pixs as the filling mask to fill in
* all the pixels from the border to the pixs foreground
* 3 OR the result with pixs to have an image with all
* ON pixels except for the holes.
* 4 Invert the result to get the holes as foreground
*
*
* Notes:
* (1) To get 4-c.c. holes of the 8-c.c. as foreground, use
* 4-connected filling; to get 8-c.c. holes of the 4-c.c.
* as foreground, use 8-connected filling.
*
*/
PIX *
pixHolesByFilling(PIX *pixs,
l_int32 connectivity)
{
PIX *pixsi, *pixd;
PROCNAME("pixHolesByFilling");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
if ((pixd = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
if ((pixsi = pixInvert(NULL, pixs)) == NULL) {
pixDestroy(&pixd);
return (PIX *)ERROR_PTR("pixsi not made", procName, NULL);
}
pixSetOrClearBorder(pixd, 1, 1, 1, 1, PIX_SET);
pixSeedfillBinary(pixd, pixd, pixsi, connectivity);
pixOr(pixd, pixd, pixs);
pixInvert(pixd, pixd);
pixDestroy(&pixsi);
return pixd;
}
/*!
* \brief pixFillClosedBorders()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity filling connectivity 4 or 8
* \return pixd all topologically outer closed borders are filled
* as connected comonents, or NULL on error
*
*
* Notes:
* (1) Start with 1-pixel black border on otherwise white pixd
* (2) Subtract input pixs to remove border pixels that were
* also on the closed border
* (3) Use the inverted pixs as the filling mask to fill in
* all the pixels from the outer border to the closed border
* on pixs
* (4) Invert the result to get the filled component, including
* the input border
* (5) If the borders are 4-c.c., use 8-c.c. filling, and v.v.
* (6) Closed borders within c.c. that represent holes, etc., are filled.
*
*/
PIX *
pixFillClosedBorders(PIX *pixs,
l_int32 connectivity)
{
PIX *pixsi, *pixd;
PROCNAME("pixFillClosedBorders");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
if ((pixd = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
pixSetOrClearBorder(pixd, 1, 1, 1, 1, PIX_SET);
pixSubtract(pixd, pixd, pixs);
if ((pixsi = pixInvert(NULL, pixs)) == NULL) {
pixDestroy(&pixd);
return (PIX *)ERROR_PTR("pixsi not made", procName, NULL);
}
pixSeedfillBinary(pixd, pixd, pixsi, connectivity);
pixInvert(pixd, pixd);
pixDestroy(&pixsi);
return pixd;
}
/*!
* \brief pixExtractBorderConnComps()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity filling connectivity 4 or 8
* \return pixd all pixels in the src that are in connected
* components touching the border, or NULL on error
*/
PIX *
pixExtractBorderConnComps(PIX *pixs,
l_int32 connectivity)
{
PIX *pixd;
PROCNAME("pixExtractBorderConnComps");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
/* Start with 1 pixel wide black border as seed in pixd */
if ((pixd = pixCreateTemplate(pixs)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
pixSetOrClearBorder(pixd, 1, 1, 1, 1, PIX_SET);
/* Fill in pixd from the seed, using pixs as the filling mask.
* This fills all components from pixs that are touching the border. */
pixSeedfillBinary(pixd, pixd, pixs, connectivity);
return pixd;
}
/*!
* \brief pixRemoveBorderConnComps()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity filling connectivity 4 or 8
* \return pixd all pixels in the src that are not touching the
* border or NULL on error
*
*
* Notes:
* (1) This removes all fg components touching the border.
*
*/
PIX *
pixRemoveBorderConnComps(PIX *pixs,
l_int32 connectivity)
{
PIX *pixd;
PROCNAME("pixRemoveBorderConnComps");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
/* Fill from a 1 pixel wide seed at the border into all components
* in pixs (the filling mask) that are touching the border */
pixd = pixExtractBorderConnComps(pixs, connectivity);
/* Save in pixd only those components in pixs not touching the border */
pixXor(pixd, pixd, pixs);
return pixd;
}
/*!
* \brief pixFillBgFromBorder()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity filling connectivity 4 or 8
* \return pixd with the background c.c. touching the border
* filled to foreground, or NULL on error
*
*
* Notes:
* (1) This fills all bg components touching the border to fg.
* It is the photometric inverse of pixRemoveBorderConnComps().
* (2) Invert the result to get the "holes" left after this fill.
* This can be done multiple times, extracting holes within
* holes after each pair of fillings. Specifically, this code
* peels away n successive embeddings of components:
* \code
* pix1 =
* for (i = 0; i < 2 * n; i++) {
* pix2 = pixFillBgFromBorder(pix1, 8);
* pixInvert(pix2, pix2);
* pixDestroy(&pix1);
* pix1 = pix2;
* }
* \endcode
*
*/
PIX *
pixFillBgFromBorder(PIX *pixs,
l_int32 connectivity)
{
PIX *pixd;
PROCNAME("pixFillBgFromBorder");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
/* Invert to turn bg touching the border to a fg component.
* Extract this by filling from a 1 pixel wide seed at the border. */
pixInvert(pixs, pixs);
pixd = pixExtractBorderConnComps(pixs, connectivity);
pixInvert(pixs, pixs); /* restore pixs */
/* Bit-or the filled bg component with pixs */
pixOr(pixd, pixd, pixs);
return pixd;
}
/*-----------------------------------------------------------------------*
* Hole-filling of components to bounding rectangle *
*-----------------------------------------------------------------------*/
/*!
* \brief pixFillHolesToBoundingRect()
*
* \param[in] pixs 1 bpp
* \param[in] minsize min number of pixels in the hole
* \param[in] maxhfract max hole area as fraction of fg pixels in the cc
* \param[in] minfgfract min fg area as fraction of bounding rectangle
* \return pixd with some holes possibly filled and some c.c. possibly
* expanded to their bounding rects, or NULL on error
*
*
* Notes:
* (1) This does not fill holes that are smaller in area than 'minsize'.
* Use %minsize = 0 and %maxhfract = 1.0 to fill all holes.
* (2) This does not fill holes with an area larger than
* %maxhfract times the fg area of the c.c.
* Use 1.0 to fill all holes.
* (3) This does not expand the fg of the c.c. to bounding rect if
* the fg area is less than %minfgfract times the area of the
* bounding rect. Use 1.0 to skip expanding to the bounding rect.
* (4) The decisions are made as follows:
* ~ Decide if we are filling the holes; if so, when using
* the fg area, include the filled holes.
* ~ Decide based on the fg area if we are filling to a bounding rect.
* If so, do it.
* If not, fill the holes if the condition is satisfied.
* (5) The choice of %minsize depends on the resolution.
* (6) For solidifying image mask regions on printed materials,
* which tend to be rectangular, values for %maxhfract
* and %minfgfract around 0.5 are reasonable.
*
*/
PIX *
pixFillHolesToBoundingRect(PIX *pixs,
l_int32 minsize,
l_float32 maxhfract,
l_float32 minfgfract)
{
l_int32 i, x, y, w, h, n, nfg, nh, ntot, area;
l_int32 *tab;
l_float32 hfract; /* measured hole fraction */
l_float32 fgfract; /* measured fg fraction */
BOXA *boxa;
PIX *pixd, *pixfg, *pixh;
PIXA *pixa;
PROCNAME("pixFillHolesToBoundingRect");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, NULL);
maxhfract = L_MIN(L_MAX(maxhfract, 0.0), 1.0);
minfgfract = L_MIN(L_MAX(minfgfract, 0.0), 1.0);
pixd = pixCopy(NULL, pixs);
boxa = pixConnComp(pixd, &pixa, 8);
n = boxaGetCount(boxa);
tab = makePixelSumTab8();
for (i = 0; i < n; i++) {
boxaGetBoxGeometry(boxa, i, &x, &y, &w, &h);
area = w * h;
if (area < minsize)
continue;
pixfg = pixaGetPix(pixa, i, L_COPY);
pixh = pixHolesByFilling(pixfg, 4); /* holes only */
pixCountPixels(pixfg, &nfg, tab);
pixCountPixels(pixh, &nh, tab);
hfract = (l_float32)nh / (l_float32)nfg;
ntot = nfg;
if (hfract <= maxhfract) /* we will fill the holes (at least) */
ntot = nfg + nh;
fgfract = (l_float32)ntot / (l_float32)area;
if (fgfract >= minfgfract) { /* fill to bounding rect */
pixSetAll(pixfg);
pixRasterop(pixd, x, y, w, h, PIX_SRC, pixfg, 0, 0);
} else if (hfract <= maxhfract) { /* fill just the holes */
pixRasterop(pixd, x, y, w, h, PIX_DST | PIX_SRC , pixh, 0, 0);
}
pixDestroy(&pixfg);
pixDestroy(&pixh);
}
boxaDestroy(&boxa);
pixaDestroy(&pixa);
LEPT_FREE(tab);
return pixd;
}
/*-----------------------------------------------------------------------*
* Vincent's hybrid Grayscale Seedfill method *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSeedfillGray()
*
* \param[in] pixs 8 bpp seed; filled in place
* \param[in] pixm 8 bpp filling mask
* \param[in] connectivity 4 or 8
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This is an in-place filling operation on the seed, pixs,
* where the clipping mask is always above or at the level
* of the seed as it is filled.
* (2) For details of the operation, see the description in
* seedfillGrayLow() and the code there.
* (3) As an example of use, see the description in pixHDome().
* There, the seed is an image where each pixel is a fixed
* amount smaller than the corresponding mask pixel.
* (4) Reference paper :
* L. Vincent, Morphological grayscale reconstruction in image
* analysis: applications and efficient algorithms, IEEE Transactions
* on Image Processing, vol. 2, no. 2, pp. 176-201, 1993.
*
*/
l_ok
pixSeedfillGray(PIX *pixs,
PIX *pixm,
l_int32 connectivity)
{
l_int32 h, w, wpls, wplm;
l_uint32 *datas, *datam;
PROCNAME("pixSeedfillGray");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 8)
return ERROR_INT("pixm not defined or not 8 bpp", procName, 1);
if (connectivity != 4 && connectivity != 8)
return ERROR_INT("connectivity not in {4,8}", procName, 1);
/* Make sure the sizes of seed and mask images are the same */
if (pixSizesEqual(pixs, pixm) == 0)
return ERROR_INT("pixs and pixm sizes differ", procName, 1);
datas = pixGetData(pixs);
datam = pixGetData(pixm);
wpls = pixGetWpl(pixs);
wplm = pixGetWpl(pixm);
pixGetDimensions(pixs, &w, &h, NULL);
seedfillGrayLow(datas, w, h, wpls, datam, wplm, connectivity);
return 0;
}
/*!
* \brief pixSeedfillGrayInv()
*
* \param[in] pixs 8 bpp seed; filled in place
* \param[in] pixm 8 bpp filling mask
* \param[in] connectivity 4 or 8
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This is an in-place filling operation on the seed, pixs,
* where the clipping mask is always below or at the level
* of the seed as it is filled. Think of filling up a basin
* to a particular level, given by the maximum seed value
* in the basin. Outside the filled region, the mask
* is above the filling level.
* (2) Contrast this with pixSeedfillGray(), where the clipping mask
* is always above or at the level of the fill. An example
* of its use is the hdome fill, where the seed is an image
* where each pixel is a fixed amount smaller than the
* corresponding mask pixel.
* (3) The basin fill, pixSeedfillGrayBasin(), is a special case
* where the seed pixel values are generated from the mask,
* and where the implementation uses pixSeedfillGray() by
* inverting both the seed and mask.
*
*/
l_ok
pixSeedfillGrayInv(PIX *pixs,
PIX *pixm,
l_int32 connectivity)
{
l_int32 h, w, wpls, wplm;
l_uint32 *datas, *datam;
PROCNAME("pixSeedfillGrayInv");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 8)
return ERROR_INT("pixm not defined or not 8 bpp", procName, 1);
if (connectivity != 4 && connectivity != 8)
return ERROR_INT("connectivity not in {4,8}", procName, 1);
/* Make sure the sizes of seed and mask images are the same */
if (pixSizesEqual(pixs, pixm) == 0)
return ERROR_INT("pixs and pixm sizes differ", procName, 1);
datas = pixGetData(pixs);
datam = pixGetData(pixm);
wpls = pixGetWpl(pixs);
wplm = pixGetWpl(pixm);
pixGetDimensions(pixs, &w, &h, NULL);
seedfillGrayInvLow(datas, w, h, wpls, datam, wplm, connectivity);
return 0;
}
/*!
* \brief seedfillGrayLow()
*
* Notes:
* (1) The pixels are numbered as follows:
* 1 2 3
* 4 x 5
* 6 7 8
* This low-level filling operation consists of two scans,
* raster and anti-raster, covering the entire seed image.
* This is followed by a breadth-first propagation operation to
* complete the fill.
* During the anti-raster scan, every pixel p whose current value
* could still be propagated after the anti-raster scan is put into
* the FIFO queue.
* The propagation step is a breadth-first fill to completion.
* Unlike the simple grayscale seedfill pixSeedfillGraySimple(),
* where at least two full raster/anti-raster iterations are required
* for completion and verification, the hybrid method uses only a
* single raster/anti-raster set of scans.
* (2) The filling action can be visualized from the following example.
* Suppose the mask, which clips the fill, is a sombrero-shaped
* surface, where the highest point is 200 and the low pixels
* around the rim are 30. Beyond the rim, the mask goes up a bit.
* Suppose the seed, which is filled, consists of a single point
* of height 150, located below the max of the mask, with
* the rest 0. Then in the raster scan, nothing happens until
* the high seed point is encountered, and then this value is
* propagated right and down, until it hits the side of the
* sombrero. The seed can never exceed the mask, so it fills
* to the rim, going lower along the mask surface. When it
* passes the rim, the seed continues to fill at the rim
* height to the edge of the seed image. Then on the
* anti-raster scan, the seed fills flat inside the
* sombrero to the upper and left, and then out from the
* rim as before. The final result has a seed that is
* flat outside the rim, and inside it fills the sombrero
* but only up to 150. If the rim height varies, the
* filled seed outside the rim will be at the highest
* point on the rim, which is a saddle point on the rim.
* (3) Reference paper :
* L. Vincent, Morphological grayscale reconstruction in image
* analysis: applications and efficient algorithms, IEEE Transactions
* on Image Processing, vol. 2, no. 2, pp. 176-201, 1993.
*/
static void
seedfillGrayLow(l_uint32 *datas,
l_int32 w,
l_int32 h,
l_int32 wpls,
l_uint32 *datam,
l_int32 wplm,
l_int32 connectivity)
{
l_uint8 val1, val2, val3, val4, val5, val6, val7, val8;
l_uint8 val, maxval, maskval, boolval;
l_int32 i, j, imax, jmax, queue_size;
l_uint32 *lines, *linem;
L_PIXEL *pixel;
L_QUEUE *lq_pixel;
PROCNAME("seedfillGrayLow");
if (connectivity != 4 && connectivity != 8) {
L_ERROR("connectivity must be 4 or 8\n", procName);
return;
}
imax = h - 1;
jmax = w - 1;
/* In the worst case, most of the pixels could be pushed
* onto the FIFO queue during anti-raster scan. However this
* will rarely happen, and we initialize the queue ptr size to
* the image perimeter. */
lq_pixel = lqueueCreate(2 * (w + h));
switch (connectivity)
{
case 4:
/* UL --> LR scan (Raster Order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* J(p) <- (max{J(p) union J(p) neighbors in raster order})
* intersection I(p) */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i > 0)
maxval = GET_DATA_BYTE(lines - wpls, j);
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
/* LR --> UL scan (anti-raster order)
* Let p be the currect pixel;
* J(p) <- (max{J(p) union J(p) neighbors in anti-raster order})
* intersection I(p) */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
boolval = FALSE;
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i < imax)
maxval = GET_DATA_BYTE(lines + wpls, j);
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
/*
* If there exists a point (q) which belongs to J(p)
* neighbors in anti-raster order such that J(q) < J(p)
* and J(q) < I(q) then
* fifo_add(p) */
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
if ((val7 < val) &&
(val7 < GET_DATA_BYTE(linem + wplm, j))) {
boolval = TRUE;
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
if (!boolval && (val5 < val) &&
(val5 < GET_DATA_BYTE(linem, j + 1))) {
boolval = TRUE;
}
}
if (boolval) {
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
}
}
/* Propagation step:
* while fifo_empty = false
* p <- fifo_first()
* for every pixel (q) belong to neighbors of (p)
* if J(q) < J(p) and I(q) != J(q)
* J(q) <- min(J(p), I(q));
* fifo_add(q);
* end
* end
* end */
queue_size = lqueueGetCount(lq_pixel);
while (queue_size) {
pixel = (L_PIXEL *)lqueueRemove(lq_pixel);
i = pixel->x;
j = pixel->y;
LEPT_FREE(pixel);
lines = datas + i * wpls;
linem = datam + i * wplm;
if ((val = GET_DATA_BYTE(lines, j)) > 0) {
if (i > 0) {
val2 = GET_DATA_BYTE(lines - wpls, j);
maskval = GET_DATA_BYTE(linem - wplm, j);
if (val > val2 && val2 != maskval) {
SET_DATA_BYTE(lines - wpls, j, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maskval = GET_DATA_BYTE(linem, j - 1);
if (val > val4 && val4 != maskval) {
SET_DATA_BYTE(lines, j - 1, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
maskval = GET_DATA_BYTE(linem + wplm, j);
if (val > val7 && val7 != maskval) {
SET_DATA_BYTE(lines + wpls, j, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maskval = GET_DATA_BYTE(linem, j + 1);
if (val > val5 && val5 != maskval) {
SET_DATA_BYTE(lines, j + 1, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
}
queue_size = lqueueGetCount(lq_pixel);
}
break;
case 8:
/* UL --> LR scan (Raster Order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* J(p) <- (max{J(p) union J(p) neighbors in raster order})
* intersection I(p) */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i > 0) {
if (j > 0)
maxval = GET_DATA_BYTE(lines - wpls, j - 1);
if (j < jmax) {
val3 = GET_DATA_BYTE(lines - wpls, j + 1);
maxval = L_MAX(maxval, val3);
}
val2 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val2);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
/* LR --> UL scan (anti-raster order)
* Let p be the currect pixel;
* J(p) <- (max{J(p) union J(p) neighbors in anti-raster order})
* intersection I(p) */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
boolval = FALSE;
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i < imax) {
if (j > 0) {
maxval = GET_DATA_BYTE(lines + wpls, j - 1);
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maxval = L_MAX(maxval, val8);
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
/* If there exists a point (q) which belongs to J(p)
* neighbors in anti-raster order such that J(q) < J(p)
* and J(q) < I(q) then
* fifo_add(p) */
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
if ((val6 < val) &&
(val6 < GET_DATA_BYTE(linem + wplm, j - 1))) {
boolval = TRUE;
}
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
if (!boolval && (val8 < val) &&
(val8 < GET_DATA_BYTE(linem + wplm, j + 1))) {
boolval = TRUE;
}
}
val7 = GET_DATA_BYTE(lines + wpls, j);
if (!boolval && (val7 < val) &&
(val7 < GET_DATA_BYTE(linem + wplm, j))) {
boolval = TRUE;
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
if (!boolval && (val5 < val) &&
(val5 < GET_DATA_BYTE(linem, j + 1))) {
boolval = TRUE;
}
}
if (boolval) {
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
}
}
/* Propagation step:
* while fifo_empty = false
* p <- fifo_first()
* for every pixel (q) belong to neighbors of (p)
* if J(q) < J(p) and I(q) != J(q)
* J(q) <- min(J(p), I(q));
* fifo_add(q);
* end
* end
* end */
queue_size = lqueueGetCount(lq_pixel);
while (queue_size) {
pixel = (L_PIXEL *)lqueueRemove(lq_pixel);
i = pixel->x;
j = pixel->y;
LEPT_FREE(pixel);
lines = datas + i * wpls;
linem = datam + i * wplm;
if ((val = GET_DATA_BYTE(lines, j)) > 0) {
if (i > 0) {
if (j > 0) {
val1 = GET_DATA_BYTE(lines - wpls, j - 1);
maskval = GET_DATA_BYTE(linem - wplm, j - 1);
if (val > val1 && val1 != maskval) {
SET_DATA_BYTE(lines - wpls, j - 1,
L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val3 = GET_DATA_BYTE(lines - wpls, j + 1);
maskval = GET_DATA_BYTE(linem - wplm, j + 1);
if (val > val3 && val3 != maskval) {
SET_DATA_BYTE(lines - wpls, j + 1,
L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
val2 = GET_DATA_BYTE(lines - wpls, j);
maskval = GET_DATA_BYTE(linem - wplm, j);
if (val > val2 && val2 != maskval) {
SET_DATA_BYTE(lines - wpls, j, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maskval = GET_DATA_BYTE(linem, j - 1);
if (val > val4 && val4 != maskval) {
SET_DATA_BYTE(lines, j - 1, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
maskval = GET_DATA_BYTE(linem + wplm, j - 1);
if (val > val6 && val6 != maskval) {
SET_DATA_BYTE(lines + wpls, j - 1,
L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maskval = GET_DATA_BYTE(linem + wplm, j + 1);
if (val > val8 && val8 != maskval) {
SET_DATA_BYTE(lines + wpls, j + 1,
L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maskval = GET_DATA_BYTE(linem + wplm, j);
if (val > val7 && val7 != maskval) {
SET_DATA_BYTE(lines + wpls, j, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maskval = GET_DATA_BYTE(linem, j + 1);
if (val > val5 && val5 != maskval) {
SET_DATA_BYTE(lines, j + 1, L_MIN(val, maskval));
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
}
queue_size = lqueueGetCount(lq_pixel);
}
break;
default:
L_ERROR("shouldn't get here!\n", procName);
}
lqueueDestroy(&lq_pixel, TRUE);
}
/*!
* \brief seedfillGrayInvLow()
*
* Notes:
* (1) The pixels are numbered as follows:
* 1 2 3
* 4 x 5
* 6 7 8
* This low-level filling operation consists of two scans,
* raster and anti-raster, covering the entire seed image.
* During the anti-raster scan, every pixel p such that its
* current value could still be propagated during the next
* raster scanning is put into the FIFO-queue.
* Next step is the propagation step where where we update
* and propagate the values using FIFO structure created in
* anti-raster scan.
* (2) The "Inv" signifies the fact that in this case, filling
* of the seed only takes place when the seed value is
* greater than the mask value. The mask will act to stop
* the fill when it is higher than the seed level. (This is
* in contrast to conventional grayscale filling where the
* seed always fills below the mask.)
* (3) An example of use is a basin, described by the mask (pixm),
* where within the basin, the seed pix (pixs) gets filled to the
* height of the highest seed pixel that is above its
* corresponding max pixel. Filling occurs while the
* propagating seed pixels in pixs are larger than the
* corresponding mask values in pixm.
* (4) Reference paper :
* L. Vincent, Morphological grayscale reconstruction in image
* analysis: applications and efficient algorithms, IEEE Transactions
* on Image Processing, vol. 2, no. 2, pp. 176-201, 1993.
*/
static void
seedfillGrayInvLow(l_uint32 *datas,
l_int32 w,
l_int32 h,
l_int32 wpls,
l_uint32 *datam,
l_int32 wplm,
l_int32 connectivity)
{
l_uint8 val1, val2, val3, val4, val5, val6, val7, val8;
l_uint8 val, maxval, maskval, boolval;
l_int32 i, j, imax, jmax, queue_size;
l_uint32 *lines, *linem;
L_PIXEL *pixel;
L_QUEUE *lq_pixel;
PROCNAME("seedfillGrayInvLow");
if (connectivity != 4 && connectivity != 8) {
L_ERROR("connectivity must be 4 or 8\n", procName);
return;
}
imax = h - 1;
jmax = w - 1;
/* In the worst case, most of the pixels could be pushed
* onto the FIFO queue during anti-raster scan. However this
* will rarely happen, and we initialize the queue ptr size to
* the image perimeter. */
lq_pixel = lqueueCreate(2 * (w + h));
switch (connectivity)
{
case 4:
/* UL --> LR scan (Raster Order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* tmp <- max{J(p) union J(p) neighbors in raster order}
* if (tmp > I(p))
* J(p) <- tmp
* end */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i > 0) {
val2 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val2);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
/* LR --> UL scan (anti-raster order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* tmp <- max{J(p) union J(p) neighbors in anti-raster order}
* if (tmp > I(p))
* J(p) <- tmp
* end */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
boolval = FALSE;
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
val = maxval = GET_DATA_BYTE(lines, j);
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
val = GET_DATA_BYTE(lines, j);
/*
* If there exists a point (q) which belongs to J(p)
* neighbors in anti-raster order such that J(q) < J(p)
* and J(p) > I(q) then
* fifo_add(p) */
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
if ((val7 < val) &&
(val > GET_DATA_BYTE(linem + wplm, j))) {
boolval = TRUE;
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
if (!boolval && (val5 < val) &&
(val > GET_DATA_BYTE(linem, j + 1))) {
boolval = TRUE;
}
}
if (boolval) {
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
}
}
/* Propagation step:
* while fifo_empty = false
* p <- fifo_first()
* for every pixel (q) belong to neighbors of (p)
* if J(q) < J(p) and J(p) > I(q)
* J(q) <- min(J(p), I(q));
* fifo_add(q);
* end
* end
* end */
queue_size = lqueueGetCount(lq_pixel);
while (queue_size) {
pixel = (L_PIXEL *)lqueueRemove(lq_pixel);
i = pixel->x;
j = pixel->y;
LEPT_FREE(pixel);
lines = datas + i * wpls;
linem = datam + i * wplm;
if ((val = GET_DATA_BYTE(lines, j)) > 0) {
if (i > 0) {
val2 = GET_DATA_BYTE(lines - wpls, j);
maskval = GET_DATA_BYTE(linem - wplm, j);
if (val > val2 && val > maskval) {
SET_DATA_BYTE(lines - wpls, j, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maskval = GET_DATA_BYTE(linem, j - 1);
if (val > val4 && val > maskval) {
SET_DATA_BYTE(lines, j - 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
maskval = GET_DATA_BYTE(linem + wplm, j);
if (val > val7 && val > maskval) {
SET_DATA_BYTE(lines + wpls, j, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maskval = GET_DATA_BYTE(linem, j + 1);
if (val > val5 && val > maskval) {
SET_DATA_BYTE(lines, j + 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
}
queue_size = lqueueGetCount(lq_pixel);
}
break;
case 8:
/* UL --> LR scan (Raster Order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* tmp <- max{J(p) union J(p) neighbors in raster order}
* if (tmp > I(p))
* J(p) <- tmp
* end */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i > 0) {
if (j > 0) {
val1 = GET_DATA_BYTE(lines - wpls, j - 1);
maxval = L_MAX(maxval, val1);
}
if (j < jmax) {
val3 = GET_DATA_BYTE(lines - wpls, j + 1);
maxval = L_MAX(maxval, val3);
}
val2 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val2);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
/* LR --> UL scan (anti-raster order)
* If I : mask image
* J : marker image
* Let p be the currect pixel;
* tmp <- max{J(p) union J(p) neighbors in anti-raster order}
* if (tmp > I(p))
* J(p) <- tmp
* end */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
boolval = FALSE;
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
maxval = L_MAX(maxval, val6);
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maxval = L_MAX(maxval, val8);
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
val = GET_DATA_BYTE(lines, j);
/*
* If there exists a point (q) which belongs to J(p)
* neighbors in anti-raster order such that J(q) < J(p)
* and J(p) > I(q) then
* fifo_add(p) */
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
if ((val6 < val) &&
(val > GET_DATA_BYTE(linem + wplm, j - 1))) {
boolval = TRUE;
}
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
if (!boolval && (val8 < val) &&
(val > GET_DATA_BYTE(linem + wplm, j + 1))) {
boolval = TRUE;
}
}
val7 = GET_DATA_BYTE(lines + wpls, j);
if (!boolval && (val7 < val) &&
(val > GET_DATA_BYTE(linem + wplm, j))) {
boolval = TRUE;
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
if (!boolval && (val5 < val) &&
(val > GET_DATA_BYTE(linem, j + 1))) {
boolval = TRUE;
}
}
if (boolval) {
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
}
}
/* Propagation step:
* while fifo_empty = false
* p <- fifo_first()
* for every pixel (q) belong to neighbors of (p)
* if J(q) < J(p) and J(p) > I(q)
* J(q) <- min(J(p), I(q));
* fifo_add(q);
* end
* end
* end */
queue_size = lqueueGetCount(lq_pixel);
while (queue_size) {
pixel = (L_PIXEL *)lqueueRemove(lq_pixel);
i = pixel->x;
j = pixel->y;
LEPT_FREE(pixel);
lines = datas + i * wpls;
linem = datam + i * wplm;
if ((val = GET_DATA_BYTE(lines, j)) > 0) {
if (i > 0) {
if (j > 0) {
val1 = GET_DATA_BYTE(lines - wpls, j - 1);
maskval = GET_DATA_BYTE(linem - wplm, j - 1);
if (val > val1 && val > maskval) {
SET_DATA_BYTE(lines - wpls, j - 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val3 = GET_DATA_BYTE(lines - wpls, j + 1);
maskval = GET_DATA_BYTE(linem - wplm, j + 1);
if (val > val3 && val > maskval) {
SET_DATA_BYTE(lines - wpls, j + 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
val2 = GET_DATA_BYTE(lines - wpls, j);
maskval = GET_DATA_BYTE(linem - wplm, j);
if (val > val2 && val > maskval) {
SET_DATA_BYTE(lines - wpls, j, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i - 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maskval = GET_DATA_BYTE(linem, j - 1);
if (val > val4 && val > maskval) {
SET_DATA_BYTE(lines, j - 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
maskval = GET_DATA_BYTE(linem + wplm, j - 1);
if (val > val6 && val > maskval) {
SET_DATA_BYTE(lines + wpls, j - 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j - 1;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maskval = GET_DATA_BYTE(linem + wplm, j + 1);
if (val > val8 && val > maskval) {
SET_DATA_BYTE(lines + wpls, j + 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maskval = GET_DATA_BYTE(linem + wplm, j);
if (val > val7 && val > maskval) {
SET_DATA_BYTE(lines + wpls, j, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i + 1;
pixel->y = j;
lqueueAdd(lq_pixel, pixel);
}
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maskval = GET_DATA_BYTE(linem, j + 1);
if (val > val5 && val > maskval) {
SET_DATA_BYTE(lines, j + 1, val);
pixel = (L_PIXEL *)LEPT_CALLOC(1, sizeof(L_PIXEL));
pixel->x = i;
pixel->y = j + 1;
lqueueAdd(lq_pixel, pixel);
}
}
}
queue_size = lqueueGetCount(lq_pixel);
}
break;
default:
L_ERROR("shouldn't get here!\n", procName);
}
lqueueDestroy(&lq_pixel, TRUE);
}
/*-----------------------------------------------------------------------*
* Vincent's Iterative Grayscale Seedfill method *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSeedfillGraySimple()
*
* \param[in] pixs 8 bpp seed; filled in place
* \param[in] pixm 8 bpp filling mask
* \param[in] connectivity 4 or 8
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This is an in-place filling operation on the seed, pixs,
* where the clipping mask is always above or at the level
* of the seed as it is filled.
* (2) For details of the operation, see the description in
* seedfillGrayLowSimple() and the code there.
* (3) As an example of use, see the description in pixHDome().
* There, the seed is an image where each pixel is a fixed
* amount smaller than the corresponding mask pixel.
* (4) Reference paper :
* L. Vincent, Morphological grayscale reconstruction in image
* analysis: applications and efficient algorithms, IEEE Transactions
* on Image Processing, vol. 2, no. 2, pp. 176-201, 1993.
*
*/
l_ok
pixSeedfillGraySimple(PIX *pixs,
PIX *pixm,
l_int32 connectivity)
{
l_int32 i, h, w, wpls, wplm, boolval;
l_uint32 *datas, *datam;
PIX *pixt;
PROCNAME("pixSeedfillGraySimple");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 8)
return ERROR_INT("pixm not defined or not 8 bpp", procName, 1);
if (connectivity != 4 && connectivity != 8)
return ERROR_INT("connectivity not in {4,8}", procName, 1);
/* Make sure the sizes of seed and mask images are the same */
if (pixSizesEqual(pixs, pixm) == 0)
return ERROR_INT("pixs and pixm sizes differ", procName, 1);
/* This is used to test for completion */
if ((pixt = pixCreateTemplate(pixs)) == NULL)
return ERROR_INT("pixt not made", procName, 1);
datas = pixGetData(pixs);
datam = pixGetData(pixm);
wpls = pixGetWpl(pixs);
wplm = pixGetWpl(pixm);
pixGetDimensions(pixs, &w, &h, NULL);
for (i = 0; i < MaxIters; i++) {
pixCopy(pixt, pixs);
seedfillGrayLowSimple(datas, w, h, wpls, datam, wplm, connectivity);
pixEqual(pixs, pixt, &boolval);
if (boolval == 1) {
#if DEBUG_PRINT_ITERS
L_INFO("Gray seed fill converged: %d iters\n", procName, i + 1);
#endif /* DEBUG_PRINT_ITERS */
break;
}
}
pixDestroy(&pixt);
return 0;
}
/*!
* \brief pixSeedfillGrayInvSimple()
*
* \param[in] pixs 8 bpp seed; filled in place
* \param[in] pixm 8 bpp filling mask
* \param[in] connectivity 4 or 8
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This is an in-place filling operation on the seed, pixs,
* where the clipping mask is always below or at the level
* of the seed as it is filled. Think of filling up a basin
* to a particular level, given by the maximum seed value
* in the basin. Outside the filled region, the mask
* is above the filling level.
* (2) Contrast this with pixSeedfillGraySimple(), where the clipping mask
* is always above or at the level of the fill. An example
* of its use is the hdome fill, where the seed is an image
* where each pixel is a fixed amount smaller than the
* corresponding mask pixel.
*
*/
l_ok
pixSeedfillGrayInvSimple(PIX *pixs,
PIX *pixm,
l_int32 connectivity)
{
l_int32 i, h, w, wpls, wplm, boolval;
l_uint32 *datas, *datam;
PIX *pixt;
PROCNAME("pixSeedfillGrayInvSimple");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 8)
return ERROR_INT("pixm not defined or not 8 bpp", procName, 1);
if (connectivity != 4 && connectivity != 8)
return ERROR_INT("connectivity not in {4,8}", procName, 1);
/* Make sure the sizes of seed and mask images are the same */
if (pixSizesEqual(pixs, pixm) == 0)
return ERROR_INT("pixs and pixm sizes differ", procName, 1);
/* This is used to test for completion */
if ((pixt = pixCreateTemplate(pixs)) == NULL)
return ERROR_INT("pixt not made", procName, 1);
datas = pixGetData(pixs);
datam = pixGetData(pixm);
wpls = pixGetWpl(pixs);
wplm = pixGetWpl(pixm);
pixGetDimensions(pixs, &w, &h, NULL);
for (i = 0; i < MaxIters; i++) {
pixCopy(pixt, pixs);
seedfillGrayInvLowSimple(datas, w, h, wpls, datam, wplm, connectivity);
pixEqual(pixs, pixt, &boolval);
if (boolval == 1) {
#if DEBUG_PRINT_ITERS
L_INFO("Gray seed fill converged: %d iters\n", procName, i + 1);
#endif /* DEBUG_PRINT_ITERS */
break;
}
}
pixDestroy(&pixt);
return 0;
}
/*!
* \brief seedfillGrayLowSimple()
*
* Notes:
* (1) The pixels are numbered as follows:
* 1 2 3
* 4 x 5
* 6 7 8
* This low-level filling operation consists of two scans,
* raster and anti-raster, covering the entire seed image.
* The caller typically iterates until the filling is
* complete.
* (2) The filling action can be visualized from the following example.
* Suppose the mask, which clips the fill, is a sombrero-shaped
* surface, where the highest point is 200 and the low pixels
* around the rim are 30. Beyond the rim, the mask goes up a bit.
* Suppose the seed, which is filled, consists of a single point
* of height 150, located below the max of the mask, with
* the rest 0. Then in the raster scan, nothing happens until
* the high seed point is encountered, and then this value is
* propagated right and down, until it hits the side of the
* sombrero. The seed can never exceed the mask, so it fills
* to the rim, going lower along the mask surface. When it
* passes the rim, the seed continues to fill at the rim
* height to the edge of the seed image. Then on the
* anti-raster scan, the seed fills flat inside the
* sombrero to the upper and left, and then out from the
* rim as before. The final result has a seed that is
* flat outside the rim, and inside it fills the sombrero
* but only up to 150. If the rim height varies, the
* filled seed outside the rim will be at the highest
* point on the rim, which is a saddle point on the rim.
*/
static void
seedfillGrayLowSimple(l_uint32 *datas,
l_int32 w,
l_int32 h,
l_int32 wpls,
l_uint32 *datam,
l_int32 wplm,
l_int32 connectivity)
{
l_uint8 val2, val3, val4, val5, val7, val8;
l_uint8 val, maxval, maskval;
l_int32 i, j, imax, jmax;
l_uint32 *lines, *linem;
PROCNAME("seedfillGrayLowSimple");
imax = h - 1;
jmax = w - 1;
switch (connectivity)
{
case 4:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i > 0)
maxval = GET_DATA_BYTE(lines - wpls, j);
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
/* LR --> UL scan */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i < imax)
maxval = GET_DATA_BYTE(lines + wpls, j);
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
break;
case 8:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i > 0) {
if (j > 0)
maxval = GET_DATA_BYTE(lines - wpls, j - 1);
if (j < jmax) {
val2 = GET_DATA_BYTE(lines - wpls, j + 1);
maxval = L_MAX(maxval, val2);
}
val3 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val3);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
/* LR --> UL scan */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
if ((maskval = GET_DATA_BYTE(linem, j)) > 0) {
maxval = 0;
if (i < imax) {
if (j > 0)
maxval = GET_DATA_BYTE(lines + wpls, j - 1);
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maxval = L_MAX(maxval, val8);
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
val = GET_DATA_BYTE(lines, j);
maxval = L_MAX(maxval, val);
val = L_MIN(maxval, maskval);
SET_DATA_BYTE(lines, j, val);
}
}
}
break;
default:
L_ERROR("connectivity must be 4 or 8\n", procName);
}
}
/*!
* \brief seedfillGrayInvLowSimple()
*
* Notes:
* (1) The pixels are numbered as follows:
* 1 2 3
* 4 x 5
* 6 7 8
* This low-level filling operation consists of two scans,
* raster and anti-raster, covering the entire seed image.
* The caller typically iterates until the filling is
* complete.
* (2) The "Inv" signifies the fact that in this case, filling
* of the seed only takes place when the seed value is
* greater than the mask value. The mask will act to stop
* the fill when it is higher than the seed level. (This is
* in contrast to conventional grayscale filling where the
* seed always fills below the mask.)
* (3) An example of use is a basin, described by the mask (pixm),
* where within the basin, the seed pix (pixs) gets filled to the
* height of the highest seed pixel that is above its
* corresponding max pixel. Filling occurs while the
* propagating seed pixels in pixs are larger than the
* corresponding mask values in pixm.
*/
static void
seedfillGrayInvLowSimple(l_uint32 *datas,
l_int32 w,
l_int32 h,
l_int32 wpls,
l_uint32 *datam,
l_int32 wplm,
l_int32 connectivity)
{
l_uint8 val1, val2, val3, val4, val5, val6, val7, val8;
l_uint8 maxval, maskval;
l_int32 i, j, imax, jmax;
l_uint32 *lines, *linem;
PROCNAME("seedfillGrayInvLowSimple");
imax = h - 1;
jmax = w - 1;
switch (connectivity)
{
case 4:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i > 0) {
val2 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val2);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
/* LR --> UL scan */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i < imax) {
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
break;
case 8:
/* UL --> LR scan */
for (i = 0; i < h; i++) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = 0; j < w; j++) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i > 0) {
if (j > 0) {
val1 = GET_DATA_BYTE(lines - wpls, j - 1);
maxval = L_MAX(maxval, val1);
}
if (j < jmax) {
val2 = GET_DATA_BYTE(lines - wpls, j + 1);
maxval = L_MAX(maxval, val2);
}
val3 = GET_DATA_BYTE(lines - wpls, j);
maxval = L_MAX(maxval, val3);
}
if (j > 0) {
val4 = GET_DATA_BYTE(lines, j - 1);
maxval = L_MAX(maxval, val4);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
/* LR --> UL scan */
for (i = imax; i >= 0; i--) {
lines = datas + i * wpls;
linem = datam + i * wplm;
for (j = jmax; j >= 0; j--) {
if ((maskval = GET_DATA_BYTE(linem, j)) < 255) {
maxval = GET_DATA_BYTE(lines, j);
if (i < imax) {
if (j > 0) {
val6 = GET_DATA_BYTE(lines + wpls, j - 1);
maxval = L_MAX(maxval, val6);
}
if (j < jmax) {
val8 = GET_DATA_BYTE(lines + wpls, j + 1);
maxval = L_MAX(maxval, val8);
}
val7 = GET_DATA_BYTE(lines + wpls, j);
maxval = L_MAX(maxval, val7);
}
if (j < jmax) {
val5 = GET_DATA_BYTE(lines, j + 1);
maxval = L_MAX(maxval, val5);
}
if (maxval > maskval)
SET_DATA_BYTE(lines, j, maxval);
}
}
}
break;
default:
L_ERROR("connectivity must be 4 or 8\n", procName);
}
}
/*-----------------------------------------------------------------------*
* Gray seedfill variations *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSeedfillGrayBasin()
*
* \param[in] pixb binary mask giving seed locations
* \param[in] pixm 8 bpp basin-type filling mask
* \param[in] delta amount of seed value above mask
* \param[in] connectivity 4 or 8
* \return pixd filled seed if OK, NULL on error
*
*
* Notes:
* (1) This fills from a seed within basins defined by a filling mask.
* The seed value(s) are greater than the corresponding
* filling mask value, and the result has the bottoms of
* the basins raised by the initial seed value.
* (2) The seed has value 255 except where pixb has fg (1), which
* are the seed 'locations'. At the seed locations, the seed
* value is the corresponding value of the mask pixel in pixm
* plus %delta. If %delta == 0, we return a copy of pixm.
* (3) The actual filling is done using the standard grayscale filling
* operation on the inverse of the mask and using the inverse
* of the seed image. After filling, we return the inverse of
* the filled seed.
* (4) As an example of use: pixm can describe a grayscale image
* of text, where the (dark) text pixels are basins of
* low values; pixb can identify the local minima in pixm (say, at
* the bottom of the basins); and delta is the amount that we wish
* to raise (lighten) the basins. We construct the seed
* (a.k.a marker) image from pixb, pixm and %delta.
*
*/
PIX *
pixSeedfillGrayBasin(PIX *pixb,
PIX *pixm,
l_int32 delta,
l_int32 connectivity)
{
PIX *pixbi, *pixmi, *pixsd;
PROCNAME("pixSeedfillGrayBasin");
if (!pixb || pixGetDepth(pixb) != 1)
return (PIX *)ERROR_PTR("pixb undefined or not 1 bpp", procName, NULL);
if (!pixm || pixGetDepth(pixm) != 8)
return (PIX *)ERROR_PTR("pixm undefined or not 8 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not in {4,8}", procName, NULL);
if (delta <= 0) {
L_WARNING("delta <= 0; returning a copy of pixm\n", procName);
return pixCopy(NULL, pixm);
}
/* Add delta to every pixel in pixm */
pixsd = pixCopy(NULL, pixm);
pixAddConstantGray(pixsd, delta);
/* Prepare the seed. Write 255 in all pixels of
* ([pixm] + delta) where pixb is 0. */
pixbi = pixInvert(NULL, pixb);
pixSetMasked(pixsd, pixbi, 255);
/* Fill the inverse seed, using the inverse clipping mask */
pixmi = pixInvert(NULL, pixm);
pixInvert(pixsd, pixsd);
pixSeedfillGray(pixsd, pixmi, connectivity);
/* Re-invert the filled seed */
pixInvert(pixsd, pixsd);
pixDestroy(&pixbi);
pixDestroy(&pixmi);
return pixsd;
}
/*-----------------------------------------------------------------------*
* Vincent's Distance Function method *
*-----------------------------------------------------------------------*/
/*!
* \brief pixDistanceFunction()
*
* \param[in] pixs 1 bpp
* \param[in] connectivity 4 or 8
* \param[in] outdepth 8 or 16 bits for pixd
* \param[in] boundcond L_BOUNDARY_BG, L_BOUNDARY_FG
* \return pixd, or NULL on error
*
*
* Notes:
* (1) This computes the distance of each pixel from the nearest
* background pixel. All bg pixels therefore have a distance of 0,
* and the fg pixel distances increase linearly from 1 at the
* boundary. It can also be used to compute the distance of
* each pixel from the nearest fg pixel, by inverting the input
* image before calling this function. Then all fg pixels have
* a distance 0 and the bg pixel distances increase linearly
* from 1 at the boundary.
* (2) The algorithm, described in Leptonica on the page on seed
* filling and connected components, is due to Luc Vincent.
* In brief, we generate an 8 or 16 bpp image, initialized
* with the fg pixels of the input pix set to 1 and the
* 1-boundary pixels (i.e., the boundary pixels of width 1 on
* the four sides set as either:
* * L_BOUNDARY_BG: 0
* * L_BOUNDARY_FG: max
* where max = 0xff for 8 bpp and 0xffff for 16 bpp.
* Then do raster/anti-raster sweeps over all pixels interior
* to the 1-boundary, where the value of each new pixel is
* taken to be 1 more than the minimum of the previously-seen
* connected pixels (using either 4 or 8 connectivity).
* Finally, set the 1-boundary pixels using the mirrored method;
* this removes the max values there.
* (3) Using L_BOUNDARY_BG clamps the distance to 0 at the
* boundary. Using L_BOUNDARY_FG allows the distance
* at the image boundary to "float".
* (4) For 4-connected, one could initialize only the left and top
* 1-boundary pixels, and go all the way to the right
* and bottom; then coming back reset left and top. But we
* instead use a method that works for both 4- and 8-connected.
*
*/
PIX *
pixDistanceFunction(PIX *pixs,
l_int32 connectivity,
l_int32 outdepth,
l_int32 boundcond)
{
l_int32 w, h, wpld;
l_uint32 *datad;
PIX *pixd;
PROCNAME("pixDistanceFunction");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("!pixs or pixs not 1 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
if (outdepth != 8 && outdepth != 16)
return (PIX *)ERROR_PTR("outdepth not 8 or 16 bpp", procName, NULL);
if (boundcond != L_BOUNDARY_BG && boundcond != L_BOUNDARY_FG)
return (PIX *)ERROR_PTR("invalid boundcond", procName, NULL);
pixGetDimensions(pixs, &w, &h, NULL);
if ((pixd = pixCreate(w, h, outdepth)) == NULL)
return (PIX *)ERROR_PTR("pixd not made", procName, NULL);
datad = pixGetData(pixd);
wpld = pixGetWpl(pixd);
/* Initialize the fg pixels to 1 and the bg pixels to 0 */
pixSetMasked(pixd, pixs, 1);
if (boundcond == L_BOUNDARY_BG) {
distanceFunctionLow(datad, w, h, outdepth, wpld, connectivity);
} else { /* L_BOUNDARY_FG: set boundary pixels to max val */
pixRasterop(pixd, 0, 0, w, 1, PIX_SET, NULL, 0, 0); /* top */
pixRasterop(pixd, 0, h - 1, w, 1, PIX_SET, NULL, 0, 0); /* bot */
pixRasterop(pixd, 0, 0, 1, h, PIX_SET, NULL, 0, 0); /* left */
pixRasterop(pixd, w - 1, 0, 1, h, PIX_SET, NULL, 0, 0); /* right */
distanceFunctionLow(datad, w, h, outdepth, wpld, connectivity);
/* Set each boundary pixel equal to the pixel next to it */
pixSetMirroredBorder(pixd, 1, 1, 1, 1);
}
return pixd;
}
/*!
* \brief distanceFunctionLow()
*/
static void
distanceFunctionLow(l_uint32 *datad,
l_int32 w,
l_int32 h,
l_int32 d,
l_int32 wpld,
l_int32 connectivity)
{
l_int32 val1, val2, val3, val4, val5, val6, val7, val8, minval, val;
l_int32 i, j, imax, jmax;
l_uint32 *lined;
PROCNAME("distanceFunctionLow");
/* One raster scan followed by one anti-raster scan.
* This does not re-set the 1-boundary of pixels that
* were initialized to either 0 or maxval. */
imax = h - 1;
jmax = w - 1;
switch (connectivity)
{
case 4:
if (d == 8) {
/* UL --> LR scan */
for (i = 1; i < imax; i++) {
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((val = GET_DATA_BYTE(lined, j)) > 0) {
val2 = GET_DATA_BYTE(lined - wpld, j);
val4 = GET_DATA_BYTE(lined, j - 1);
minval = L_MIN(val2, val4);
minval = L_MIN(minval, 254);
SET_DATA_BYTE(lined, j, minval + 1);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((val = GET_DATA_BYTE(lined, j)) > 0) {
val7 = GET_DATA_BYTE(lined + wpld, j);
val5 = GET_DATA_BYTE(lined, j + 1);
minval = L_MIN(val5, val7);
minval = L_MIN(minval + 1, val);
SET_DATA_BYTE(lined, j, minval);
}
}
}
} else { /* d == 16 */
/* UL --> LR scan */
for (i = 1; i < imax; i++) {
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((val = GET_DATA_TWO_BYTES(lined, j)) > 0) {
val2 = GET_DATA_TWO_BYTES(lined - wpld, j);
val4 = GET_DATA_TWO_BYTES(lined, j - 1);
minval = L_MIN(val2, val4);
minval = L_MIN(minval, 0xfffe);
SET_DATA_TWO_BYTES(lined, j, minval + 1);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((val = GET_DATA_TWO_BYTES(lined, j)) > 0) {
val7 = GET_DATA_TWO_BYTES(lined + wpld, j);
val5 = GET_DATA_TWO_BYTES(lined, j + 1);
minval = L_MIN(val5, val7);
minval = L_MIN(minval + 1, val);
SET_DATA_TWO_BYTES(lined, j, minval);
}
}
}
}
break;
case 8:
if (d == 8) {
/* UL --> LR scan */
for (i = 1; i < imax; i++) {
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((val = GET_DATA_BYTE(lined, j)) > 0) {
val1 = GET_DATA_BYTE(lined - wpld, j - 1);
val2 = GET_DATA_BYTE(lined - wpld, j);
val3 = GET_DATA_BYTE(lined - wpld, j + 1);
val4 = GET_DATA_BYTE(lined, j - 1);
minval = L_MIN(val1, val2);
minval = L_MIN(minval, val3);
minval = L_MIN(minval, val4);
minval = L_MIN(minval, 254);
SET_DATA_BYTE(lined, j, minval + 1);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((val = GET_DATA_BYTE(lined, j)) > 0) {
val8 = GET_DATA_BYTE(lined + wpld, j + 1);
val7 = GET_DATA_BYTE(lined + wpld, j);
val6 = GET_DATA_BYTE(lined + wpld, j - 1);
val5 = GET_DATA_BYTE(lined, j + 1);
minval = L_MIN(val8, val7);
minval = L_MIN(minval, val6);
minval = L_MIN(minval, val5);
minval = L_MIN(minval + 1, val);
SET_DATA_BYTE(lined, j, minval);
}
}
}
} else { /* d == 16 */
/* UL --> LR scan */
for (i = 1; i < imax; i++) {
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((val = GET_DATA_TWO_BYTES(lined, j)) > 0) {
val1 = GET_DATA_TWO_BYTES(lined - wpld, j - 1);
val2 = GET_DATA_TWO_BYTES(lined - wpld, j);
val3 = GET_DATA_TWO_BYTES(lined - wpld, j + 1);
val4 = GET_DATA_TWO_BYTES(lined, j - 1);
minval = L_MIN(val1, val2);
minval = L_MIN(minval, val3);
minval = L_MIN(minval, val4);
minval = L_MIN(minval, 0xfffe);
SET_DATA_TWO_BYTES(lined, j, minval + 1);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((val = GET_DATA_TWO_BYTES(lined, j)) > 0) {
val8 = GET_DATA_TWO_BYTES(lined + wpld, j + 1);
val7 = GET_DATA_TWO_BYTES(lined + wpld, j);
val6 = GET_DATA_TWO_BYTES(lined + wpld, j - 1);
val5 = GET_DATA_TWO_BYTES(lined, j + 1);
minval = L_MIN(val8, val7);
minval = L_MIN(minval, val6);
minval = L_MIN(minval, val5);
minval = L_MIN(minval + 1, val);
SET_DATA_TWO_BYTES(lined, j, minval);
}
}
}
}
break;
default:
L_ERROR("connectivity must be 4 or 8\n", procName);
}
}
/*-----------------------------------------------------------------------*
* Seed spread (based on distance function) *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSeedspread()
*
* \param[in] pixs 8 bpp
* \param[in] connectivity 4 or 8
* \return pixd, or NULL on error
*
*
* Notes:
* (1) The raster/anti-raster method for implementing this filling
* operation was suggested by Ray Smith.
* (2) This takes an arbitrary set of nonzero pixels in pixs, which
* can be sparse, and spreads (extrapolates) the values to
* fill all the pixels in pixd with the nonzero value it is
* closest to in pixs. This is similar (though not completely
* equivalent) to doing a Voronoi tiling of the image, with a
* tile surrounding each pixel that has a nonzero value.
* All pixels within a tile are then closer to its "central"
* pixel than to any others. Then assign the value of the
* "central" pixel to each pixel in the tile.
* (3) This is implemented by computing a distance function in parallel
* with the fill. The distance function uses free boundary
* conditions (assumed maxval outside), and it controls the
* propagation of the pixels in pixd away from the nonzero
* (seed) values. This is done in 2 traversals (raster/antiraster).
* In the raster direction, whenever the distance function
* is nonzero, the spread pixel takes on the value of its
* predecessor that has the minimum distance value. In the
* antiraster direction, whenever the distance function is nonzero
* and its value is replaced by a smaller value, the spread
* pixel takes the value of the predecessor with the minimum
* distance value.
* (4) At boundaries where a pixel is equidistant from two
* nearest nonzero (seed) pixels, the decision of which value
* to use is arbitrary (greedy in search for minimum distance).
* This can give rise to strange-looking results, particularly
* for 4-connectivity where the L1 distance is computed from
* steps in N,S,E and W directions (no diagonals).
*
*/
PIX *
pixSeedspread(PIX *pixs,
l_int32 connectivity)
{
l_int32 w, h, wplt, wplg;
l_uint32 *datat, *datag;
PIX *pixm, *pixt, *pixg, *pixd;
PROCNAME("pixSeedspread");
if (!pixs || pixGetDepth(pixs) != 8)
return (PIX *)ERROR_PTR("!pixs or pixs not 8 bpp", procName, NULL);
if (connectivity != 4 && connectivity != 8)
return (PIX *)ERROR_PTR("connectivity not 4 or 8", procName, NULL);
/* Add a 4 byte border to pixs. This simplifies the computation. */
pixg = pixAddBorder(pixs, 4, 0);
pixGetDimensions(pixg, &w, &h, NULL);
/* Initialize distance function pixt. Threshold pixs to get
* a 0 at the seed points where the pixs pixel is nonzero, and
* a 1 at all points that need to be filled. Use this as a
* mask to set a 1 in pixt at all non-seed points. Also, set all
* pixt pixels in an interior boundary of width 1 to the
* maximum value. For debugging, to view the distance function,
* use pixConvert16To8(pixt, L_LS_BYTE) on small images. */
pixm = pixThresholdToBinary(pixg, 1);
pixt = pixCreate(w, h, 16);
pixSetMasked(pixt, pixm, 1);
pixRasterop(pixt, 0, 0, w, 1, PIX_SET, NULL, 0, 0); /* top */
pixRasterop(pixt, 0, h - 1, w, 1, PIX_SET, NULL, 0, 0); /* bot */
pixRasterop(pixt, 0, 0, 1, h, PIX_SET, NULL, 0, 0); /* left */
pixRasterop(pixt, w - 1, 0, 1, h, PIX_SET, NULL, 0, 0); /* right */
datat = pixGetData(pixt);
wplt = pixGetWpl(pixt);
/* Do the interpolation and remove the border. */
datag = pixGetData(pixg);
wplg = pixGetWpl(pixg);
seedspreadLow(datag, w, h, wplg, datat, wplt, connectivity);
pixd = pixRemoveBorder(pixg, 4);
pixDestroy(&pixm);
pixDestroy(&pixg);
pixDestroy(&pixt);
return pixd;
}
/*!
* \brief seedspreadLow()
*
* See pixSeedspread() for a brief description of the algorithm here.
*/
static void
seedspreadLow(l_uint32 *datad,
l_int32 w,
l_int32 h,
l_int32 wpld,
l_uint32 *datat,
l_int32 wplt,
l_int32 connectivity)
{
l_int32 val1t, val2t, val3t, val4t, val5t, val6t, val7t, val8t;
l_int32 i, j, imax, jmax, minval, valt, vald;
l_uint32 *linet, *lined;
PROCNAME("seedspreadLow");
/* One raster scan followed by one anti-raster scan.
* pixt is initialized to have 0 on pixels where the
* input is specified in pixd, and to have 1 on all
* other pixels. We only change pixels in pixt and pixd
* that are non-zero in pixt. */
imax = h - 1;
jmax = w - 1;
switch (connectivity)
{
case 4:
/* UL --> LR scan */
for (i = 1; i < h; i++) {
linet = datat + i * wplt;
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((valt = GET_DATA_TWO_BYTES(linet, j)) > 0) {
val2t = GET_DATA_TWO_BYTES(linet - wplt, j);
val4t = GET_DATA_TWO_BYTES(linet, j - 1);
minval = L_MIN(val2t, val4t);
minval = L_MIN(minval, 0xfffe);
SET_DATA_TWO_BYTES(linet, j, minval + 1);
if (val2t < val4t)
vald = GET_DATA_BYTE(lined - wpld, j);
else
vald = GET_DATA_BYTE(lined, j - 1);
SET_DATA_BYTE(lined, j, vald);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
linet = datat + i * wplt;
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((valt = GET_DATA_TWO_BYTES(linet, j)) > 0) {
val7t = GET_DATA_TWO_BYTES(linet + wplt, j);
val5t = GET_DATA_TWO_BYTES(linet, j + 1);
minval = L_MIN(val5t, val7t);
minval = L_MIN(minval + 1, valt);
if (valt > minval) { /* replace */
SET_DATA_TWO_BYTES(linet, j, minval);
if (val5t < val7t)
vald = GET_DATA_BYTE(lined, j + 1);
else
vald = GET_DATA_BYTE(lined + wplt, j);
SET_DATA_BYTE(lined, j, vald);
}
}
}
}
break;
case 8:
/* UL --> LR scan */
for (i = 1; i < h; i++) {
linet = datat + i * wplt;
lined = datad + i * wpld;
for (j = 1; j < jmax; j++) {
if ((valt = GET_DATA_TWO_BYTES(linet, j)) > 0) {
val1t = GET_DATA_TWO_BYTES(linet - wplt, j - 1);
val2t = GET_DATA_TWO_BYTES(linet - wplt, j);
val3t = GET_DATA_TWO_BYTES(linet - wplt, j + 1);
val4t = GET_DATA_TWO_BYTES(linet, j - 1);
minval = L_MIN(val1t, val2t);
minval = L_MIN(minval, val3t);
minval = L_MIN(minval, val4t);
minval = L_MIN(minval, 0xfffe);
SET_DATA_TWO_BYTES(linet, j, minval + 1);
if (minval == val1t)
vald = GET_DATA_BYTE(lined - wpld, j - 1);
else if (minval == val2t)
vald = GET_DATA_BYTE(lined - wpld, j);
else if (minval == val3t)
vald = GET_DATA_BYTE(lined - wpld, j + 1);
else /* minval == val4t */
vald = GET_DATA_BYTE(lined, j - 1);
SET_DATA_BYTE(lined, j, vald);
}
}
}
/* LR --> UL scan */
for (i = imax - 1; i > 0; i--) {
linet = datat + i * wplt;
lined = datad + i * wpld;
for (j = jmax - 1; j > 0; j--) {
if ((valt = GET_DATA_TWO_BYTES(linet, j)) > 0) {
val8t = GET_DATA_TWO_BYTES(linet + wplt, j + 1);
val7t = GET_DATA_TWO_BYTES(linet + wplt, j);
val6t = GET_DATA_TWO_BYTES(linet + wplt, j - 1);
val5t = GET_DATA_TWO_BYTES(linet, j + 1);
minval = L_MIN(val8t, val7t);
minval = L_MIN(minval, val6t);
minval = L_MIN(minval, val5t);
minval = L_MIN(minval + 1, valt);
if (valt > minval) { /* replace */
SET_DATA_TWO_BYTES(linet, j, minval);
if (minval == val5t + 1)
vald = GET_DATA_BYTE(lined, j + 1);
else if (minval == val6t + 1)
vald = GET_DATA_BYTE(lined + wpld, j - 1);
else if (minval == val7t + 1)
vald = GET_DATA_BYTE(lined + wpld, j);
else /* minval == val8t + 1 */
vald = GET_DATA_BYTE(lined + wpld, j + 1);
SET_DATA_BYTE(lined, j, vald);
}
}
}
}
break;
default:
L_ERROR("connectivity must be 4 or 8\n", procName);
break;
}
}
/*-----------------------------------------------------------------------*
* Local extrema *
*-----------------------------------------------------------------------*/
/*!
* \brief pixLocalExtrema()
*
* \param[in] pixs 8 bpp
* \param[in] maxmin max allowed for the min in a 3x3 neighborhood;
* use 0 for default which is to have no upper bound
* \param[in] minmax min allowed for the max in a 3x3 neighborhood;
* use 0 for default which is to have no lower bound
* \param[out] ppixmin [optional] mask of local minima
* \param[out] ppixmax [optional] mask of local maxima
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This gives the actual local minima and maxima.
* A local minimum is a pixel whose surrounding pixels all
* have values at least as large, and likewise for a local
* maximum. For the local minima, %maxmin is the upper
* bound for the value of pixs. Likewise, for the local maxima,
* %minmax is the lower bound for the value of pixs.
* (2) The minima are found by starting with the erosion-and-equality
* approach of pixSelectedLocalExtrema(). This is followed
* by a qualification step, where each c.c. in the resulting
* minimum mask is extracted, the pixels bordering it are
* located, and they are queried. If all of those pixels
* are larger than the value of that minimum, it is a true
* minimum and its c.c. is saved; otherwise the c.c. is
* rejected. Note that if a bordering pixel has the
* same value as the minimum, it must then have a
* neighbor that is smaller, so the component is not a
* true minimum.
* (3) The maxima are found by inverting the image and looking
* for the minima there.
* (4) The generated masks can be used as markers for
* further operations.
*
*/
l_ok
pixLocalExtrema(PIX *pixs,
l_int32 maxmin,
l_int32 minmax,
PIX **ppixmin,
PIX **ppixmax)
{
PIX *pixmin, *pixmax, *pixt1, *pixt2;
PROCNAME("pixLocalExtrema");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!ppixmin && !ppixmax)
return ERROR_INT("neither &pixmin, &pixmax are defined", procName, 1);
if (maxmin <= 0) maxmin = 254;
if (minmax <= 0) minmax = 1;
if (ppixmin) {
pixt1 = pixErodeGray(pixs, 3, 3);
pixmin = pixFindEqualValues(pixs, pixt1);
pixDestroy(&pixt1);
pixQualifyLocalMinima(pixs, pixmin, maxmin);
*ppixmin = pixmin;
}
if (ppixmax) {
pixt1 = pixInvert(NULL, pixs);
pixt2 = pixErodeGray(pixt1, 3, 3);
pixmax = pixFindEqualValues(pixt1, pixt2);
pixDestroy(&pixt2);
pixQualifyLocalMinima(pixt1, pixmax, 255 - minmax);
*ppixmax = pixmax;
pixDestroy(&pixt1);
}
return 0;
}
/*!
* \brief pixQualifyLocalMinima()
*
* \param[in] pixs 8 bpp image from which pixm has been extracted
* \param[in] pixm 1 bpp mask of values equal to min in 3x3 neighborhood
* \param[in] maxval max allowed for the min in a 3x3 neighborhood;
* use 0 for default which is to have no upper bound
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This function acts in-place to remove all c.c. in pixm
* that are not true local minima in pixs. As seen in
* pixLocalExtrema(), the input pixm are found by selecting those
* pixels of pixs whose values do not change with a 3x3
* grayscale erosion. Here, we require that for each c.c.
* in pixm, all pixels in pixs that correspond to the exterior
* boundary pixels of the c.c. have values that are greater
* than the value within the c.c.
* (2) The maximum allowed value for each local minimum can be
* bounded with %maxval. Use 0 for default, which is to have
* no upper bound (equivalent to maxval == 254).
*
*/
static l_int32
pixQualifyLocalMinima(PIX *pixs,
PIX *pixm,
l_int32 maxval)
{
l_int32 n, i, j, k, x, y, w, h, xc, yc, wc, hc, xon, yon;
l_int32 vals, wpls, wplc, ismin;
l_uint32 val;
l_uint32 *datas, *datac, *lines, *linec;
BOXA *boxa;
PIX *pix1, *pix2, *pix3;
PIXA *pixa;
PROCNAME("pixQualifyLocalMinima");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 1)
return ERROR_INT("pixm not defined or not 1 bpp", procName, 1);
if (maxval <= 0) maxval = 254;
pixGetDimensions(pixs, &w, &h, NULL);
datas = pixGetData(pixs);
wpls = pixGetWpl(pixs);
boxa = pixConnComp(pixm, &pixa, 8);
n = pixaGetCount(pixa);
for (k = 0; k < n; k++) {
boxaGetBoxGeometry(boxa, k, &xc, &yc, &wc, &hc);
pix1 = pixaGetPix(pixa, k, L_COPY);
pix2 = pixAddBorder(pix1, 1, 0);
pix3 = pixDilateBrick(NULL, pix2, 3, 3);
pixXor(pix3, pix3, pix2); /* exterior boundary pixels */
datac = pixGetData(pix3);
wplc = pixGetWpl(pix3);
nextOnPixelInRaster(pix1, 0, 0, &xon, &yon);
pixGetPixel(pixs, xc + xon, yc + yon, &val);
if (val > maxval) { /* too large; erase */
pixRasterop(pixm, xc, yc, wc, hc, PIX_XOR, pix1, 0, 0);
pixDestroy(&pix1);
pixDestroy(&pix2);
pixDestroy(&pix3);
continue;
}
ismin = TRUE;
/* Check all values in pixs that correspond to the exterior
* boundary pixels of the c.c. in pixm. Verify that the
* value in the c.c. is always less. */
for (i = 0, y = yc - 1; i < hc + 2 && y >= 0 && y < h; i++, y++) {
lines = datas + y * wpls;
linec = datac + i * wplc;
for (j = 0, x = xc - 1; j < wc + 2 && x >= 0 && x < w; j++, x++) {
if (GET_DATA_BIT(linec, j)) {
vals = GET_DATA_BYTE(lines, x);
if (vals <= val) { /* not a minimum! */
ismin = FALSE;
break;
}
}
}
if (!ismin)
break;
}
if (!ismin) /* erase it */
pixRasterop(pixm, xc, yc, wc, hc, PIX_XOR, pix1, 0, 0);
pixDestroy(&pix1);
pixDestroy(&pix2);
pixDestroy(&pix3);
}
boxaDestroy(&boxa);
pixaDestroy(&pixa);
return 0;
}
/*!
* \brief pixSelectedLocalExtrema()
*
* \param[in] pixs 8 bpp
* \param[in] mindist -1 for keeping all pixels; >= 0 specifies distance
* \param[out] ppixmin mask of local minima
* \param[out] ppixmax mask of local maxima
* \return 0 if OK, 1 on error
*
*
* Notes:
* (1) This selects those local 3x3 minima that are at least a
* specified distance from the nearest local 3x3 maxima, and v.v.
* for the selected set of local 3x3 maxima.
* The local 3x3 minima is the set of pixels whose value equals
* the value after a 3x3 brick erosion, and the local 3x3 maxima
* is the set of pixels whose value equals the value after
* a 3x3 brick dilation.
* (2) mindist is the minimum distance allowed between
* local 3x3 minima and local 3x3 maxima, in an 8-connected sense.
* mindist == 1 keeps all pixels found in step 1.
* mindist == 0 removes all pixels from each mask that are
* both a local 3x3 minimum and a local 3x3 maximum.
* mindist == 1 removes any local 3x3 minimum pixel that touches a
* local 3x3 maximum pixel, and likewise for the local maxima.
* To make the decision, visualize each local 3x3 minimum pixel
* as being surrounded by a square of size (2 * mindist + 1)
* on each side, such that no local 3x3 maximum pixel is within
* that square; and v.v.
* (3) The generated masks can be used as markers for further operations.
*
*/
l_ok
pixSelectedLocalExtrema(PIX *pixs,
l_int32 mindist,
PIX **ppixmin,
PIX **ppixmax)
{
PIX *pixmin, *pixmax, *pixt, *pixtmin, *pixtmax;
PROCNAME("pixSelectedLocalExtrema");
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs not defined or not 8 bpp", procName, 1);
if (!ppixmin || !ppixmax)
return ERROR_INT("&pixmin and &pixmax not both defined", procName, 1);
pixt = pixErodeGray(pixs, 3, 3);
pixmin = pixFindEqualValues(pixs, pixt);
pixDestroy(&pixt);
pixt = pixDilateGray(pixs, 3, 3);
pixmax = pixFindEqualValues(pixs, pixt);
pixDestroy(&pixt);
/* Remove all points that are within the prescribed distance
* from each other. */
if (mindist < 0) { /* remove no points */
*ppixmin = pixmin;
*ppixmax = pixmax;
} else if (mindist == 0) { /* remove points belonging to both sets */
pixt = pixAnd(NULL, pixmin, pixmax);
*ppixmin = pixSubtract(pixmin, pixmin, pixt);
*ppixmax = pixSubtract(pixmax, pixmax, pixt);
pixDestroy(&pixt);
} else {
pixtmin = pixDilateBrick(NULL, pixmin,
2 * mindist + 1, 2 * mindist + 1);
pixtmax = pixDilateBrick(NULL, pixmax,
2 * mindist + 1, 2 * mindist + 1);
*ppixmin = pixSubtract(pixmin, pixmin, pixtmax);
*ppixmax = pixSubtract(pixmax, pixmax, pixtmin);
pixDestroy(&pixtmin);
pixDestroy(&pixtmax);
}
return 0;
}
/*!
* \brief pixFindEqualValues()
*
* \param[in] pixs1 8 bpp
* \param[in] pixs2 8 bpp
* \return pixd 1 bpp mask, or NULL on error
*
*
* Notes:
* (1) The two images are aligned at the UL corner, and the returned
* image has ON pixels where the pixels in pixs1 and pixs2
* have equal values.
*
*/
PIX *
pixFindEqualValues(PIX *pixs1,
PIX *pixs2)
{
l_int32 w1, h1, w2, h2, w, h;
l_int32 i, j, val1, val2, wpls1, wpls2, wpld;
l_uint32 *datas1, *datas2, *datad, *lines1, *lines2, *lined;
PIX *pixd;
PROCNAME("pixFindEqualValues");
if (!pixs1 || pixGetDepth(pixs1) != 8)
return (PIX *)ERROR_PTR("pixs1 undefined or not 8 bpp", procName, NULL);
if (!pixs2 || pixGetDepth(pixs2) != 8)
return (PIX *)ERROR_PTR("pixs2 undefined or not 8 bpp", procName, NULL);
pixGetDimensions(pixs1, &w1, &h1, NULL);
pixGetDimensions(pixs2, &w2, &h2, NULL);
w = L_MIN(w1, w2);
h = L_MIN(h1, h2);
pixd = pixCreate(w, h, 1);
datas1 = pixGetData(pixs1);
datas2 = pixGetData(pixs2);
datad = pixGetData(pixd);
wpls1 = pixGetWpl(pixs1);
wpls2 = pixGetWpl(pixs2);
wpld = pixGetWpl(pixd);
for (i = 0; i < h; i++) {
lines1 = datas1 + i * wpls1;
lines2 = datas2 + i * wpls2;
lined = datad + i * wpld;
for (j = 0; j < w; j++) {
val1 = GET_DATA_BYTE(lines1, j);
val2 = GET_DATA_BYTE(lines2, j);
if (val1 == val2)
SET_DATA_BIT(lined, j);
}
}
return pixd;
}
/*-----------------------------------------------------------------------*
* Selection of minima in mask connected components *
*-----------------------------------------------------------------------*/
/*!
* \brief pixSelectMinInConnComp()
*
* \param[in] pixs 8 bpp
* \param[in] pixm 1 bpp
* \param[out] ppta pta of min pixel locations
* \param[out] pnav [optional] numa of minima values
* \return 0 if OK, 1 on error.
*
*
* Notes:
* (1) For each 8 connected component in pixm, this finds
* a pixel in pixs that has the lowest value, and saves
* it in a Pta. If several pixels in pixs have the same
* minimum value, it picks the first one found.
* (2) For a mask pixm of true local minima, all pixels in each
* connected component have the same value in pixs, so it is
* fastest to select one of them using a special seedfill
* operation. Not yet implemented.
*
*/
l_ok
pixSelectMinInConnComp(PIX *pixs,
PIX *pixm,
PTA **ppta,
NUMA **pnav)
{
l_int32 bx, by, bw, bh, i, j, c, n;
l_int32 xs, ys, minx, miny, wpls, wplt, val, minval;
l_uint32 *datas, *datat, *lines, *linet;
BOXA *boxa;
NUMA *nav;
PIX *pixt, *pixs2, *pixm2;
PIXA *pixa;
PTA *pta;
PROCNAME("pixSelectMinInConnComp");
if (!ppta)
return ERROR_INT("&pta not defined", procName, 1);
*ppta = NULL;
if (pnav) *pnav = NULL;
if (!pixs || pixGetDepth(pixs) != 8)
return ERROR_INT("pixs undefined or not 8 bpp", procName, 1);
if (!pixm || pixGetDepth(pixm) != 1)
return ERROR_INT("pixm undefined or not 1 bpp", procName, 1);
/* Crop to the min size if necessary */
if (pixCropToMatch(pixs, pixm, &pixs2, &pixm2)) {
pixDestroy(&pixs2);
pixDestroy(&pixm2);
return ERROR_INT("cropping failure", procName, 1);
}
/* Find value and location of min value pixel in each component */
boxa = pixConnComp(pixm2, &pixa, 8);
n = boxaGetCount(boxa);
pta = ptaCreate(n);
*ppta = pta;
nav = numaCreate(n);
datas = pixGetData(pixs2);
wpls = pixGetWpl(pixs2);
for (c = 0; c < n; c++) {
pixt = pixaGetPix(pixa, c, L_CLONE);
boxaGetBoxGeometry(boxa, c, &bx, &by, &bw, &bh);
if (bw == 1 && bh == 1) {
ptaAddPt(pta, bx, by);
numaAddNumber(nav, GET_DATA_BYTE(datas + by * wpls, bx));
pixDestroy(&pixt);
continue;
}
datat = pixGetData(pixt);
wplt = pixGetWpl(pixt);
minx = miny = 1000000;
minval = 256;
for (i = 0; i < bh; i++) {
ys = by + i;
lines = datas + ys * wpls;
linet = datat + i * wplt;
for (j = 0; j < bw; j++) {
xs = bx + j;
if (GET_DATA_BIT(linet, j)) {
val = GET_DATA_BYTE(lines, xs);
if (val < minval) {
minval = val;
minx = xs;
miny = ys;
}
}
}
}
ptaAddPt(pta, minx, miny);
numaAddNumber(nav, GET_DATA_BYTE(datas + miny * wpls, minx));
pixDestroy(&pixt);
}
boxaDestroy(&boxa);
pixaDestroy(&pixa);
if (pnav)
*pnav = nav;
else
numaDestroy(&nav);
pixDestroy(&pixs2);
pixDestroy(&pixm2);
return 0;
}
/*-----------------------------------------------------------------------*
* Removal of seeded connected components from a mask *
*-----------------------------------------------------------------------*/
/*!
* \brief pixRemoveSeededComponents()
*
* \param[in] pixd [optional]; can be null or equal to pixm; 1 bpp
* \param[in] pixs 1 bpp seed
* \param[in] pixm 1 bpp filling mask
* \param[in] connectivity 4 or 8
* \param[in] bordersize amount of border clearing
* \return pixd, or NULL on error
*
*
* Notes:
* (1) This removes each component in pixm for which there is
* at least one seed in pixs. If pixd == NULL, this returns
* the result in a new pixd. Otherwise, it is an in-place
* operation on pixm. In no situation is pixs altered,
* because we do the filling with a copy of pixs.
* (2) If bordersize > 0, it also clears all pixels within a
* distance %bordersize of the edge of pixd. This is here
* because pixLocalExtrema() typically finds local minima
* at the border. Use %bordersize >= 2 to remove these.
*
*/
PIX *
pixRemoveSeededComponents(PIX *pixd,
PIX *pixs,
PIX *pixm,
l_int32 connectivity,
l_int32 bordersize)
{
PIX *pixt;
PROCNAME("pixRemoveSeededComponents");
if (!pixs || pixGetDepth(pixs) != 1)
return (PIX *)ERROR_PTR("pixs undefined or not 1 bpp", procName, pixd);
if (!pixm || pixGetDepth(pixm) != 1)
return (PIX *)ERROR_PTR("pixm undefined or not 1 bpp", procName, pixd);
if (pixd && pixd != pixm)
return (PIX *)ERROR_PTR("operation not inplace", procName, pixd);
pixt = pixCopy(NULL, pixs);
pixSeedfillBinary(pixt, pixt, pixm, connectivity);
pixd = pixXor(pixd, pixm, pixt);
if (bordersize > 0)
pixSetOrClearBorder(pixd, bordersize, bordersize, bordersize,
bordersize, PIX_CLR);
pixDestroy(&pixt);
return pixd;
}