summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to '2.6.38/1000_linux-2.6.38.1.patch')
-rw-r--r--2.6.38/1000_linux-2.6.38.1.patch2781
1 files changed, 2781 insertions, 0 deletions
diff --git a/2.6.38/1000_linux-2.6.38.1.patch b/2.6.38/1000_linux-2.6.38.1.patch
new file mode 100644
index 0000000..5b209ea
--- /dev/null
+++ b/2.6.38/1000_linux-2.6.38.1.patch
@@ -0,0 +1,2781 @@
+diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
+index 87da405..9edb75d 100644
+--- a/Documentation/i2c/instantiating-devices
++++ b/Documentation/i2c/instantiating-devices
+@@ -100,7 +100,7 @@ static int __devinit usb_hcd_pnx4008_probe(struct platform_device *pdev)
+ (...)
+ i2c_adap = i2c_get_adapter(2);
+ memset(&i2c_info, 0, sizeof(struct i2c_board_info));
+- strlcpy(i2c_info.name, "isp1301_pnx", I2C_NAME_SIZE);
++ strlcpy(i2c_info.type, "isp1301_pnx", I2C_NAME_SIZE);
+ isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
+ normal_i2c, NULL);
+ i2c_put_adapter(i2c_adap);
+diff --git a/Makefile b/Makefile
+index d6592b6..167ef45 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ VERSION = 2
+ PATCHLEVEL = 6
+ SUBLEVEL = 38
+-EXTRAVERSION =
++EXTRAVERSION = .1
+ NAME = Flesh-Eating Bats with Fangs
+
+ # *DOCUMENTATION*
+diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
+index 0ca90b8..556bbd4 100644
+--- a/arch/arm/mach-davinci/board-dm644x-evm.c
++++ b/arch/arm/mach-davinci/board-dm644x-evm.c
+@@ -440,11 +440,6 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
+ gpio_request(gpio + 7, "nCF_SEL");
+ gpio_direction_output(gpio + 7, 1);
+
+- /* irlml6401 switches over 1A, in under 8 msec;
+- * now it can be managed by nDRV_VBUS ...
+- */
+- davinci_setup_usb(1000, 8);
+-
+ return 0;
+ }
+
+@@ -705,6 +700,9 @@ static __init void davinci_evm_init(void)
+ davinci_serial_init(&uart_config);
+ dm644x_init_asp(&dm644x_evm_snd_data);
+
++ /* irlml6401 switches over 1A, in under 8 msec */
++ davinci_setup_usb(1000, 8);
++
+ soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
+index d840f4a..5bb95a1 100644
+--- a/arch/microblaze/include/asm/uaccess.h
++++ b/arch/microblaze/include/asm/uaccess.h
+@@ -120,16 +120,16 @@ static inline unsigned long __must_check __clear_user(void __user *to,
+ {
+ /* normal memset with two words to __ex_table */
+ __asm__ __volatile__ ( \
+- "1: sb r0, %2, r0;" \
++ "1: sb r0, %1, r0;" \
+ " addik %0, %0, -1;" \
+ " bneid %0, 1b;" \
+- " addik %2, %2, 1;" \
++ " addik %1, %1, 1;" \
+ "2: " \
+ __EX_TABLE_SECTION \
+ ".word 1b,2b;" \
+ ".previous;" \
+- : "=r"(n) \
+- : "0"(n), "r"(to)
++ : "=r"(n), "=r"(to) \
++ : "0"(n), "1"(to)
+ );
+ return n;
+ }
+diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
+index d7d94b8..3948f1d 100644
+--- a/arch/parisc/kernel/irq.c
++++ b/arch/parisc/kernel/irq.c
+@@ -108,7 +108,7 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
+ int cpu_dest;
+
+ /* timer and ipi have to always be received on all CPUs */
+- if (CHECK_IRQ_PER_CPU(irq)) {
++ if (CHECK_IRQ_PER_CPU(irq_to_desc(irq)->status)) {
+ /* Bad linux design decision. The mask has already
+ * been set; we must reset it */
+ cpumask_setall(irq_desc[irq].affinity);
+diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
+index 125fc1a..7626fa7 100644
+--- a/arch/powerpc/include/asm/reg.h
++++ b/arch/powerpc/include/asm/reg.h
+@@ -880,6 +880,7 @@
+ #define PV_970 0x0039
+ #define PV_POWER5 0x003A
+ #define PV_POWER5p 0x003B
++#define PV_POWER7 0x003F
+ #define PV_970FX 0x003C
+ #define PV_630 0x0040
+ #define PV_630p 0x0041
+diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
+index ab6f6be..97e0ae4 100644
+--- a/arch/powerpc/kernel/perf_event.c
++++ b/arch/powerpc/kernel/perf_event.c
+@@ -1269,6 +1269,28 @@ unsigned long perf_instruction_pointer(struct pt_regs *regs)
+ return ip;
+ }
+
++static bool pmc_overflow(unsigned long val)
++{
++ if ((int)val < 0)
++ return true;
++
++ /*
++ * Events on POWER7 can roll back if a speculative event doesn't
++ * eventually complete. Unfortunately in some rare cases they will
++ * raise a performance monitor exception. We need to catch this to
++ * ensure we reset the PMC. In all cases the PMC will be 256 or less
++ * cycles from overflow.
++ *
++ * We only do this if the first pass fails to find any overflowing
++ * PMCs because a user might set a period of less than 256 and we
++ * don't want to mistakenly reset them.
++ */
++ if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256))
++ return true;
++
++ return false;
++}
++
+ /*
+ * Performance monitor interrupt stuff
+ */
+@@ -1316,7 +1338,7 @@ static void perf_event_interrupt(struct pt_regs *regs)
+ if (is_limited_pmc(i + 1))
+ continue;
+ val = read_pmc(i + 1);
+- if ((int)val < 0)
++ if (pmc_overflow(val))
+ write_pmc(i + 1, 0);
+ }
+ }
+diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
+index 94b979d..effff47 100644
+--- a/arch/x86/include/asm/pgtable-3level.h
++++ b/arch/x86/include/asm/pgtable-3level.h
+@@ -69,8 +69,6 @@ static inline void native_pmd_clear(pmd_t *pmd)
+
+ static inline void pud_clear(pud_t *pudp)
+ {
+- unsigned long pgd;
+-
+ set_pud(pudp, __pud(0));
+
+ /*
+@@ -79,13 +77,10 @@ static inline void pud_clear(pud_t *pudp)
+ * section 8.1: in PAE mode we explicitly have to flush the
+ * TLB via cr3 if the top-level pgd is changed...
+ *
+- * Make sure the pud entry we're updating is within the
+- * current pgd to avoid unnecessary TLB flushes.
++ * Currently all places where pud_clear() is called either have
++ * flush_tlb_mm() followed or don't need TLB flush (x86_64 code or
++ * pud_clear_bad()), so we don't need TLB flush here.
+ */
+- pgd = read_cr3();
+- if (__pa(pudp) >= pgd && __pa(pudp) <
+- (pgd + sizeof(pgd_t)*PTRS_PER_PGD))
+- write_cr3(pgd);
+ }
+
+ #ifdef CONFIG_SMP
+diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
+index 7038b95..4db3554 100644
+--- a/arch/x86/kernel/alternative.c
++++ b/arch/x86/kernel/alternative.c
+@@ -620,7 +620,12 @@ static int __kprobes stop_machine_text_poke(void *data)
+ flush_icache_range((unsigned long)p->addr,
+ (unsigned long)p->addr + p->len);
+ }
+-
++ /*
++ * Intel Archiecture Software Developer's Manual section 7.1.3 specifies
++ * that a core serializing instruction such as "cpuid" should be
++ * executed on _each_ core before the new instruction is made visible.
++ */
++ sync_core();
+ return 0;
+ }
+
+diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
+index 294f26d..0b5e2b5 100644
+--- a/arch/x86/kernel/e820.c
++++ b/arch/x86/kernel/e820.c
+@@ -847,15 +847,21 @@ static int __init parse_memopt(char *p)
+ if (!p)
+ return -EINVAL;
+
+-#ifdef CONFIG_X86_32
+ if (!strcmp(p, "nopentium")) {
++#ifdef CONFIG_X86_32
+ setup_clear_cpu_cap(X86_FEATURE_PSE);
+ return 0;
+- }
++#else
++ printk(KERN_WARNING "mem=nopentium ignored! (only supported on x86_32)\n");
++ return -EINVAL;
+ #endif
++ }
+
+ userdef = 1;
+ mem_size = memparse(p, &p);
++ /* don't remove all of memory when handling "mem={invalid}" param */
++ if (mem_size == 0)
++ return -EINVAL;
+ e820_remove_range(mem_size, ULLONG_MAX - mem_size, E820_RAM, 1);
+
+ return 0;
+diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
+index 9efbdcc..3755ef4 100644
+--- a/arch/x86/kernel/early-quirks.c
++++ b/arch/x86/kernel/early-quirks.c
+@@ -159,7 +159,12 @@ static void __init ati_bugs_contd(int num, int slot, int func)
+ if (rev >= 0x40)
+ acpi_fix_pin2_polarity = 1;
+
+- if (rev > 0x13)
++ /*
++ * SB600: revisions 0x11, 0x12, 0x13, 0x14, ...
++ * SB700: revisions 0x39, 0x3a, ...
++ * SB800: revisions 0x40, 0x41, ...
++ */
++ if (rev >= 0x39)
+ return;
+
+ if (acpi_use_timer_override)
+diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
+index aed1ffb..bbd5c80 100644
+--- a/arch/x86/kernel/entry_64.S
++++ b/arch/x86/kernel/entry_64.S
+@@ -1248,7 +1248,7 @@ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs)
+ decl PER_CPU_VAR(irq_count)
+ jmp error_exit
+ CFI_ENDPROC
+-END(do_hypervisor_callback)
++END(xen_do_hypervisor_callback)
+
+ /*
+ * Hypervisor uses this for application faults while it executes.
+diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
+index 0113d19..8573b83 100644
+--- a/arch/x86/mm/pgtable.c
++++ b/arch/x86/mm/pgtable.c
+@@ -168,8 +168,7 @@ void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd)
+ * section 8.1: in PAE mode we explicitly have to flush the
+ * TLB via cr3 if the top-level pgd is changed...
+ */
+- if (mm == current->active_mm)
+- write_cr3(read_cr3());
++ flush_tlb_mm(mm);
+ }
+ #else /* !CONFIG_X86_PAE */
+
+diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
+index b8d96ce..34e08f6 100644
+--- a/drivers/ata/ahci.c
++++ b/drivers/ata/ahci.c
+@@ -260,6 +260,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
+ { PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
++ { PCI_VDEVICE(INTEL, 0x2826), board_ahci }, /* PBG RAID */
+ { PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
+
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
+@@ -383,6 +384,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
+ .class = PCI_CLASS_STORAGE_SATA_AHCI,
+ .class_mask = 0xffffff,
+ .driver_data = board_ahci_yes_fbs }, /* 88se9128 */
++ { PCI_DEVICE(0x1b4b, 0x9125),
++ .driver_data = board_ahci_yes_fbs }, /* 88se9125 */
+
+ /* Promise */
+ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
+diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
+index 17a6378..e16850e 100644
+--- a/drivers/ata/libata-eh.c
++++ b/drivers/ata/libata-eh.c
+@@ -1618,7 +1618,7 @@ static void ata_eh_analyze_serror(struct ata_link *link)
+ * host links. For disabled PMP links, only N bit is
+ * considered as X bit is left at 1 for link plugging.
+ */
+- if (link->lpm_policy != ATA_LPM_MAX_POWER)
++ if (link->lpm_policy > ATA_LPM_MAX_POWER)
+ hotplug_mask = 0; /* hotplug doesn't work w/ LPM */
+ else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
+ hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
+diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
+index 85da4c4..2eee8e0 100644
+--- a/drivers/gpu/drm/drm_sysfs.c
++++ b/drivers/gpu/drm/drm_sysfs.c
+@@ -158,8 +158,15 @@ static ssize_t status_show(struct device *device,
+ {
+ struct drm_connector *connector = to_drm_connector(device);
+ enum drm_connector_status status;
++ int ret;
++
++ ret = mutex_lock_interruptible(&connector->dev->mode_config.mutex);
++ if (ret)
++ return ret;
+
+ status = connector->funcs->detect(connector, true);
++ mutex_unlock(&connector->dev->mode_config.mutex);
++
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ drm_get_connector_status_name(status));
+ }
+diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
+index 8a9e08b..2347bc1 100644
+--- a/drivers/gpu/drm/i915/i915_irq.c
++++ b/drivers/gpu/drm/i915/i915_irq.c
+@@ -1377,7 +1377,12 @@ int i915_enable_vblank(struct drm_device *dev, int pipe)
+ else
+ i915_enable_pipestat(dev_priv, pipe,
+ PIPE_VBLANK_INTERRUPT_ENABLE);
++
++ /* maintain vblank delivery even in deep C-states */
++ if (dev_priv->info->gen == 3)
++ I915_WRITE(INSTPM, INSTPM_AGPBUSY_DIS << 16);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
++
+ return 0;
+ }
+
+@@ -1390,6 +1395,10 @@ void i915_disable_vblank(struct drm_device *dev, int pipe)
+ unsigned long irqflags;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
++ if (dev_priv->info->gen == 3)
++ I915_WRITE(INSTPM,
++ INSTPM_AGPBUSY_DIS << 16 | INSTPM_AGPBUSY_DIS);
++
+ if (HAS_PCH_SPLIT(dev))
+ ironlake_disable_display_irq(dev_priv, (pipe == 0) ?
+ DE_PIPEA_VBLANK: DE_PIPEB_VBLANK);
+diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
+index 2abe240..12c547a 100644
+--- a/drivers/gpu/drm/i915/i915_reg.h
++++ b/drivers/gpu/drm/i915/i915_reg.h
+@@ -405,9 +405,12 @@
+ #define I915_ERROR_INSTRUCTION (1<<0)
+ #define INSTPM 0x020c0
+ #define INSTPM_SELF_EN (1<<12) /* 915GM only */
++#define INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts
++ will not assert AGPBUSY# and will only
++ be delivered when out of C3. */
+ #define ACTHD 0x020c8
+ #define FW_BLC 0x020d8
+-#define FW_BLC2 0x020dc
++#define FW_BLC2 0x020dc
+ #define FW_BLC_SELF 0x020e0 /* 915+ only */
+ #define FW_BLC_SELF_EN_MASK (1<<31)
+ #define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */
+diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
+index a4e5e53..4a5a73b 100644
+--- a/drivers/gpu/drm/radeon/atombios_crtc.c
++++ b/drivers/gpu/drm/radeon/atombios_crtc.c
+@@ -61,8 +61,8 @@ static void atombios_overscan_setup(struct drm_crtc *crtc,
+ args.usOverscanLeft = cpu_to_le16((adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2);
+ args.usOverscanRight = cpu_to_le16((adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2);
+ } else if (a2 > a1) {
+- args.usOverscanLeft = cpu_to_le16((adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2);
+- args.usOverscanRight = cpu_to_le16((adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2);
++ args.usOverscanTop = cpu_to_le16((adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2);
++ args.usOverscanBottom = cpu_to_le16((adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2);
+ }
+ break;
+ case RMX_FULL:
+diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
+index 2560f01..ae445b1 100644
+--- a/drivers/hid/Kconfig
++++ b/drivers/hid/Kconfig
+@@ -68,9 +68,15 @@ config HID_A4TECH
+ ---help---
+ Support for A4 tech X5 and WOP-35 / Trust 450L mice.
+
+-config HID_ACRUX_FF
+- tristate "ACRUX force feedback"
++config HID_ACRUX
++ tristate "ACRUX game controller support"
+ depends on USB_HID
++ ---help---
++ Say Y here if you want to enable support for ACRUX game controllers.
++
++config HID_ACRUX_FF
++ tristate "ACRUX force feedback support"
++ depends on HID_ACRUX
+ select INPUT_FF_MEMLESS
+ ---help---
+ Say Y here if you want to enable force feedback support for ACRUX
+@@ -319,10 +325,10 @@ config HID_NTRIG
+ Support for N-Trig touch screen.
+
+ config HID_ORTEK
+- tristate "Ortek WKB-2000 wireless keyboard and mouse trackpad"
++ tristate "Ortek PKB-1700/WKB-2000 wireless keyboard and mouse trackpad"
+ depends on USB_HID
+ ---help---
+- Support for Ortek WKB-2000 wireless keyboard + mouse trackpad.
++ Support for Ortek PKB-1700/WKB-2000 wireless keyboard + mouse trackpad.
+
+ config HID_PANTHERLORD
+ tristate "Pantherlord/GreenAsia game controller"
+diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
+index 6efc2a0..13e6248 100644
+--- a/drivers/hid/Makefile
++++ b/drivers/hid/Makefile
+@@ -27,7 +27,7 @@ endif
+
+ obj-$(CONFIG_HID_3M_PCT) += hid-3m-pct.o
+ obj-$(CONFIG_HID_A4TECH) += hid-a4tech.o
+-obj-$(CONFIG_HID_ACRUX_FF) += hid-axff.o
++obj-$(CONFIG_HID_ACRUX) += hid-axff.o
+ obj-$(CONFIG_HID_APPLE) += hid-apple.o
+ obj-$(CONFIG_HID_BELKIN) += hid-belkin.o
+ obj-$(CONFIG_HID_CANDO) += hid-cando.o
+diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
+index 61aa712..b85744f 100644
+--- a/drivers/hid/hid-apple.c
++++ b/drivers/hid/hid-apple.c
+@@ -481,6 +481,12 @@ static const struct hid_device_id apple_devices[] = {
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
++ .driver_data = APPLE_HAS_FN },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
++ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
++ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
+ .driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+diff --git a/drivers/hid/hid-axff.c b/drivers/hid/hid-axff.c
+index e5b961d..b455428 100644
+--- a/drivers/hid/hid-axff.c
++++ b/drivers/hid/hid-axff.c
+@@ -33,6 +33,8 @@
+ #include <linux/hid.h>
+
+ #include "hid-ids.h"
++
++#ifdef CONFIG_HID_ACRUX_FF
+ #include "usbhid/usbhid.h"
+
+ struct axff_device {
+@@ -109,6 +111,12 @@ err_free_mem:
+ kfree(axff);
+ return error;
+ }
++#else
++static inline int axff_init(struct hid_device *hid)
++{
++ return 0;
++}
++#endif
+
+ static int ax_probe(struct hid_device *hdev, const struct hid_device_id *id)
+ {
+@@ -139,9 +147,25 @@ static int ax_probe(struct hid_device *hdev, const struct hid_device_id *id)
+ error);
+ }
+
++ /*
++ * We need to start polling device right away, otherwise
++ * it will go into a coma.
++ */
++ error = hid_hw_open(hdev);
++ if (error) {
++ dev_err(&hdev->dev, "hw open failed\n");
++ return error;
++ }
++
+ return 0;
+ }
+
++static void ax_remove(struct hid_device *hdev)
++{
++ hid_hw_close(hdev);
++ hid_hw_stop(hdev);
++}
++
+ static const struct hid_device_id ax_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802), },
+ { }
+@@ -149,9 +173,10 @@ static const struct hid_device_id ax_devices[] = {
+ MODULE_DEVICE_TABLE(hid, ax_devices);
+
+ static struct hid_driver ax_driver = {
+- .name = "acrux",
+- .id_table = ax_devices,
+- .probe = ax_probe,
++ .name = "acrux",
++ .id_table = ax_devices,
++ .probe = ax_probe,
++ .remove = ax_remove,
+ };
+
+ static int __init ax_init(void)
+diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
+index d678cf3..9477b2a 100644
+--- a/drivers/hid/hid-core.c
++++ b/drivers/hid/hid-core.c
+@@ -1256,9 +1256,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_X5_005D) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_RP_649) },
+-#if defined(CONFIG_HID_ACRUX_FF) || defined(CONFIG_HID_ACRUX_FF_MODULE)
+ { HID_USB_DEVICE(USB_VENDOR_ID_ACRUX, 0x0802) },
+-#endif
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ATV_IRCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IRCONTROL4) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_MIGHTYMOUSE) },
+@@ -1302,6 +1300,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+@@ -1400,6 +1401,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH) },
+@@ -1801,6 +1803,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_ISO) },
++ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
+ { }
+diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
+index 92a0d61..090bf48 100644
+--- a/drivers/hid/hid-ids.h
++++ b/drivers/hid/hid-ids.h
+@@ -103,6 +103,9 @@
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+ #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
+ #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
+ #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
+@@ -466,6 +469,7 @@
+ #define USB_DEVICE_ID_ONTRAK_ADU100 0x0064
+
+ #define USB_VENDOR_ID_ORTEK 0x05a4
++#define USB_DEVICE_ID_ORTEK_PKB1700 0x1700
+ #define USB_DEVICE_ID_ORTEK_WKB2000 0x2000
+
+ #define USB_VENDOR_ID_PANJIT 0x134c
+diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
+index 7f552bf..ebcc02a 100644
+--- a/drivers/hid/hid-input.c
++++ b/drivers/hid/hid-input.c
+@@ -290,14 +290,6 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
+ goto ignore;
+ }
+
+- if (field->report_type == HID_FEATURE_REPORT) {
+- if (device->driver->feature_mapping) {
+- device->driver->feature_mapping(device, hidinput, field,
+- usage);
+- }
+- goto ignore;
+- }
+-
+ if (device->driver->input_mapping) {
+ int ret = device->driver->input_mapping(device, hidinput, field,
+ usage, &bit, &max);
+@@ -835,6 +827,24 @@ static void hidinput_close(struct input_dev *dev)
+ hid_hw_close(hid);
+ }
+
++static void report_features(struct hid_device *hid)
++{
++ struct hid_driver *drv = hid->driver;
++ struct hid_report_enum *rep_enum;
++ struct hid_report *rep;
++ int i, j;
++
++ if (!drv->feature_mapping)
++ return;
++
++ rep_enum = &hid->report_enum[HID_FEATURE_REPORT];
++ list_for_each_entry(rep, &rep_enum->report_list, list)
++ for (i = 0; i < rep->maxfield; i++)
++ for (j = 0; j < rep->field[i]->maxusage; j++)
++ drv->feature_mapping(hid, rep->field[i],
++ rep->field[i]->usage + j);
++}
++
+ /*
+ * Register the input device; print a message.
+ * Configure the input layer interface
+@@ -863,7 +873,9 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
+ return -1;
+ }
+
+- for (k = HID_INPUT_REPORT; k <= HID_FEATURE_REPORT; k++) {
++ report_features(hid);
++
++ for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++) {
+ if (k == HID_OUTPUT_REPORT &&
+ hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS)
+ continue;
+diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
+index 698e645..318cc40 100644
+--- a/drivers/hid/hid-magicmouse.c
++++ b/drivers/hid/hid-magicmouse.c
+@@ -258,7 +258,7 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
+ input_report_abs(input, ABS_MT_TRACKING_ID, id);
+ input_report_abs(input, ABS_MT_TOUCH_MAJOR, touch_major << 2);
+ input_report_abs(input, ABS_MT_TOUCH_MINOR, touch_minor << 2);
+- input_report_abs(input, ABS_MT_ORIENTATION, orientation);
++ input_report_abs(input, ABS_MT_ORIENTATION, -orientation);
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+
+@@ -397,7 +397,7 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
+ input_set_abs_params(input, ABS_MT_TRACKING_ID, 0, 15, 0, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255, 4, 0);
+ input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255, 4, 0);
+- input_set_abs_params(input, ABS_MT_ORIENTATION, -32, 31, 1, 0);
++ input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
+
+ /* Note: Touch Y position from the device is inverted relative
+ * to how pointer motion is reported (and relative to how USB
+diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
+index 07d3183..2bbc954 100644
+--- a/drivers/hid/hid-multitouch.c
++++ b/drivers/hid/hid-multitouch.c
+@@ -122,7 +122,7 @@ struct mt_class mt_classes[] = {
+ { }
+ };
+
+-static void mt_feature_mapping(struct hid_device *hdev, struct hid_input *hi,
++static void mt_feature_mapping(struct hid_device *hdev,
+ struct hid_field *field, struct hid_usage *usage)
+ {
+ if (usage->hid == HID_DG_INPUTMODE) {
+diff --git a/drivers/hid/hid-ortek.c b/drivers/hid/hid-ortek.c
+index e90edfc..ad6faa6 100644
+--- a/drivers/hid/hid-ortek.c
++++ b/drivers/hid/hid-ortek.c
+@@ -1,5 +1,5 @@
+ /*
+- * HID driver for Ortek WKB-2000 (wireless keyboard + mouse trackpad).
++ * HID driver for Ortek PKB-1700/WKB-2000 (wireless keyboard + mouse trackpad).
+ * Fixes LogicalMaximum error in USB report description, see
+ * http://bugzilla.kernel.org/show_bug.cgi?id=14787
+ *
+@@ -30,6 +30,7 @@ static __u8 *ortek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+ }
+
+ static const struct hid_device_id ortek_devices[] = {
++ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_PKB1700) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) },
+ { }
+ };
+diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
+index a610e78..38a41d2 100644
+--- a/drivers/hwmon/sht15.c
++++ b/drivers/hwmon/sht15.c
+@@ -333,11 +333,11 @@ static inline int sht15_calc_humid(struct sht15_data *data)
+
+ const int c1 = -4;
+ const int c2 = 40500; /* x 10 ^ -6 */
+- const int c3 = -2800; /* x10 ^ -9 */
++ const int c3 = -28; /* x 10 ^ -7 */
+
+ RHlinear = c1*1000
+ + c2 * data->val_humid/1000
+- + (data->val_humid * data->val_humid * c3)/1000000;
++ + (data->val_humid * data->val_humid * c3) / 10000;
+ return (temp - 25000) * (10000 + 80 * data->val_humid)
+ / 1000000 + RHlinear;
+ }
+diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c
+index 64e0903..1d9616b 100644
+--- a/drivers/infiniband/core/cm.c
++++ b/drivers/infiniband/core/cm.c
+@@ -2989,6 +2989,7 @@ static int cm_sidr_req_handler(struct cm_work *work)
+ goto out; /* No match. */
+ }
+ atomic_inc(&cur_cm_id_priv->refcount);
++ atomic_inc(&cm_id_priv->refcount);
+ spin_unlock_irq(&cm.lock);
+
+ cm_id_priv->id.cm_handler = cur_cm_id_priv->id.cm_handler;
+diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
+index 6884da2..e450c5a 100644
+--- a/drivers/infiniband/core/cma.c
++++ b/drivers/infiniband/core/cma.c
+@@ -1210,6 +1210,11 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
+ cm_id->context = conn_id;
+ cm_id->cm_handler = cma_ib_handler;
+
++ /*
++ * Protect against the user destroying conn_id from another thread
++ * until we're done accessing it.
++ */
++ atomic_inc(&conn_id->refcount);
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
+ if (!ret) {
+ /*
+@@ -1222,8 +1227,10 @@ static int cma_req_handler(struct ib_cm_id *cm_id, struct ib_cm_event *ib_event)
+ ib_send_cm_mra(cm_id, CMA_CM_MRA_SETTING, NULL, 0);
+ mutex_unlock(&lock);
+ mutex_unlock(&conn_id->handler_mutex);
++ cma_deref_id(conn_id);
+ goto out;
+ }
++ cma_deref_id(conn_id);
+
+ /* Destroy the CM ID by returning a non-zero value. */
+ conn_id->cm_id.ib = NULL;
+@@ -1425,17 +1432,25 @@ static int iw_conn_req_handler(struct iw_cm_id *cm_id,
+ event.param.conn.private_data_len = iw_event->private_data_len;
+ event.param.conn.initiator_depth = attr.max_qp_init_rd_atom;
+ event.param.conn.responder_resources = attr.max_qp_rd_atom;
++
++ /*
++ * Protect against the user destroying conn_id from another thread
++ * until we're done accessing it.
++ */
++ atomic_inc(&conn_id->refcount);
+ ret = conn_id->id.event_handler(&conn_id->id, &event);
+ if (ret) {
+ /* User wants to destroy the CM ID */
+ conn_id->cm_id.iw = NULL;
+ cma_exch(conn_id, CMA_DESTROYING);
+ mutex_unlock(&conn_id->handler_mutex);
++ cma_deref_id(conn_id);
+ rdma_destroy_id(&conn_id->id);
+ goto out;
+ }
+
+ mutex_unlock(&conn_id->handler_mutex);
++ cma_deref_id(conn_id);
+
+ out:
+ if (dev)
+diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
+index ee82851..3185314 100644
+--- a/drivers/input/mouse/bcm5974.c
++++ b/drivers/input/mouse/bcm5974.c
+@@ -63,6 +63,10 @@
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI 0x0242
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO 0x0243
+ #define USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS 0x0244
++/* Macbook8 (unibody, March 2011) */
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246
++#define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247
+
+ #define BCM5974_DEVICE(prod) { \
+ .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
+@@ -96,6 +100,10 @@ static const struct usb_device_id bcm5974_table[] = {
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS),
++ /* MacbookPro8 */
++ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
++ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
++ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
+ /* Terminating entry */
+ {}
+ };
+@@ -274,6 +282,18 @@ static const struct bcm5974_config bcm5974_config_table[] = {
+ { DIM_X, DIM_X / SN_COORD, -4616, 5112 },
+ { DIM_Y, DIM_Y / SN_COORD, -142, 5234 }
+ },
++ {
++ USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI,
++ USB_DEVICE_ID_APPLE_WELLSPRING5_ISO,
++ USB_DEVICE_ID_APPLE_WELLSPRING5_JIS,
++ HAS_INTEGRATED_BUTTON,
++ 0x84, sizeof(struct bt_data),
++ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
++ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
++ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
++ { DIM_X, DIM_X / SN_COORD, -4415, 5050 },
++ { DIM_Y, DIM_Y / SN_COORD, -55, 6680 }
++ },
+ {}
+ };
+
+diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
+index ebc62ad..fbe1ea4 100644
+--- a/drivers/mmc/core/sdio.c
++++ b/drivers/mmc/core/sdio.c
+@@ -395,6 +395,14 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
+ if (err)
+ goto remove;
+
++ /*
++ * Update oldcard with the new RCA received from the SDIO
++ * device -- we're doing this so that it's updated in the
++ * "card" struct when oldcard overwrites that later.
++ */
++ if (oldcard)
++ oldcard->rca = card->rca;
++
+ mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+ }
+
+diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
+index 0dc905b..f7e622c 100644
+--- a/drivers/mmc/host/sdhci-pci.c
++++ b/drivers/mmc/host/sdhci-pci.c
+@@ -547,6 +547,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
+ },
+
+ {
++ .vendor = PCI_VENDOR_ID_RICOH,
++ .device = 0xe823,
++ .subvendor = PCI_ANY_ID,
++ .subdevice = PCI_ANY_ID,
++ .driver_data = (kernel_ulong_t)&sdhci_ricoh_mmc,
++ },
++
++ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB712_SD,
+ .subvendor = PCI_ANY_ID,
+diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
+index 9f01e50..7c0a7c4 100644
+--- a/drivers/net/wireless/ath/ath9k/hw.c
++++ b/drivers/net/wireless/ath/ath9k/hw.c
+@@ -495,6 +495,17 @@ static int __ath9k_hw_init(struct ath_hw *ah)
+ if (ah->hw_version.devid == AR5416_AR9100_DEVID)
+ ah->hw_version.macVersion = AR_SREV_VERSION_9100;
+
++ /*
++ * Read back AR_WA into a permanent copy and set bits 14 and 17.
++ * We need to do this to avoid RMW of this register. We cannot
++ * read the reg when chip is asleep.
++ */
++ ah->WARegVal = REG_READ(ah, AR_WA);
++ ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
++ AR_WA_ASPM_TIMER_BASED_DISABLE);
++
++ ath9k_hw_read_revisions(ah);
++
+ if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
+ ath_err(common, "Couldn't reset chip\n");
+ return -EIO;
+@@ -563,14 +574,6 @@ static int __ath9k_hw_init(struct ath_hw *ah)
+
+ ath9k_hw_init_mode_regs(ah);
+
+- /*
+- * Read back AR_WA into a permanent copy and set bits 14 and 17.
+- * We need to do this to avoid RMW of this register. We cannot
+- * read the reg when chip is asleep.
+- */
+- ah->WARegVal = REG_READ(ah, AR_WA);
+- ah->WARegVal |= (AR_WA_D3_L1_DISABLE |
+- AR_WA_ASPM_TIMER_BASED_DISABLE);
+
+ if (ah->is_pciexpress)
+ ath9k_hw_configpcipowersave(ah, 0, 0);
+@@ -1082,8 +1085,6 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah)
+ return false;
+ }
+
+- ath9k_hw_read_revisions(ah);
+-
+ return ath9k_hw_set_reset(ah, ATH9K_RESET_WARM);
+ }
+
+diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
+index b2497b8..3867a2e 100644
+--- a/drivers/net/wireless/ath/ath9k/recv.c
++++ b/drivers/net/wireless/ath/ath9k/recv.c
+@@ -439,9 +439,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
+ * mode interface or when in monitor mode. AP mode does not need this
+ * since it receives all in-BSS frames anyway.
+ */
+- if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
+- (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
+- (sc->sc_ah->is_monitoring))
++ if (sc->sc_ah->is_monitoring)
+ rfilt |= ATH9K_RX_FILTER_PROM;
+
+ if (sc->rx.rxfilter & FIF_CONTROL)
+diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
+index 6b82cac..2bb5297 100644
+--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
++++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
+@@ -871,23 +871,35 @@ static void rtl8187_work(struct work_struct *work)
+ /* The RTL8187 returns the retry count through register 0xFFFA. In
+ * addition, it appears to be a cumulative retry count, not the
+ * value for the current TX packet. When multiple TX entries are
+- * queued, the retry count will be valid for the last one in the queue.
+- * The "error" should not matter for purposes of rate setting. */
++ * waiting in the queue, the retry count will be the total for all.
++ * The "error" may matter for purposes of rate setting, but there is
++ * no other choice with this hardware.
++ */
+ struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
+ work.work);
+ struct ieee80211_tx_info *info;
+ struct ieee80211_hw *dev = priv->dev;
+ static u16 retry;
+ u16 tmp;
++ u16 avg_retry;
++ int length;
+
+ mutex_lock(&priv->conf_mutex);
+ tmp = rtl818x_ioread16(priv, (__le16 *)0xFFFA);
++ length = skb_queue_len(&priv->b_tx_status.queue);
++ if (unlikely(!length))
++ length = 1;
++ if (unlikely(tmp < retry))
++ tmp = retry;
++ avg_retry = (tmp - retry) / length;
+ while (skb_queue_len(&priv->b_tx_status.queue) > 0) {
+ struct sk_buff *old_skb;
+
+ old_skb = skb_dequeue(&priv->b_tx_status.queue);
+ info = IEEE80211_SKB_CB(old_skb);
+- info->status.rates[0].count = tmp - retry + 1;
++ info->status.rates[0].count = avg_retry + 1;
++ if (info->status.rates[0].count > RETRY_COUNT)
++ info->flags &= ~IEEE80211_TX_STAT_ACK;
+ ieee80211_tx_status_irqsafe(dev, old_skb);
+ }
+ retry = tmp;
+@@ -933,8 +945,8 @@ static int rtl8187_start(struct ieee80211_hw *dev)
+ rtl818x_iowrite32(priv, &priv->map->TX_CONF,
+ RTL818X_TX_CONF_HW_SEQNUM |
+ RTL818X_TX_CONF_DISREQQSIZE |
+- (7 << 8 /* short retry limit */) |
+- (7 << 0 /* long retry limit */) |
++ (RETRY_COUNT << 8 /* short retry limit */) |
++ (RETRY_COUNT << 0 /* long retry limit */) |
+ (7 << 21 /* MAX TX DMA */));
+ rtl8187_init_urbs(dev);
+ rtl8187b_init_status_urb(dev);
+@@ -1378,6 +1390,9 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
+ dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_RX_INCLUDES_FCS;
++ /* Initialize rate-control variables */
++ dev->max_rates = 1;
++ dev->max_rate_tries = RETRY_COUNT;
+
+ eeprom.data = dev;
+ eeprom.register_read = rtl8187_eeprom_register_read;
+diff --git a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+index 0d7b142..f1cc907 100644
+--- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
++++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
+@@ -35,6 +35,8 @@
+ #define RFKILL_MASK_8187_89_97 0x2
+ #define RFKILL_MASK_8198 0x4
+
++#define RETRY_COUNT 7
++
+ struct rtl8187_rx_info {
+ struct urb *urb;
+ struct ieee80211_hw *dev;
+diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
+index ea25e5b..c85438a 100644
+--- a/drivers/pci/pci-sysfs.c
++++ b/drivers/pci/pci-sysfs.c
+@@ -1088,7 +1088,7 @@ static int pci_create_capabilities_sysfs(struct pci_dev *dev)
+ attr->write = write_vpd_attr;
+ retval = sysfs_create_bin_file(&dev->dev.kobj, attr);
+ if (retval) {
+- kfree(dev->vpd->attr);
++ kfree(attr);
+ return retval;
+ }
+ dev->vpd->attr = attr;
+diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
+index 53a786f..bd80f63 100644
+--- a/drivers/pci/quirks.c
++++ b/drivers/pci/quirks.c
+@@ -533,6 +533,17 @@ static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi);
+
++#define ICH_PMBASE 0x40
++#define ICH_ACPI_CNTL 0x44
++#define ICH4_ACPI_EN 0x10
++#define ICH6_ACPI_EN 0x80
++#define ICH4_GPIOBASE 0x58
++#define ICH4_GPIO_CNTL 0x5c
++#define ICH4_GPIO_EN 0x10
++#define ICH6_GPIOBASE 0x48
++#define ICH6_GPIO_CNTL 0x4c
++#define ICH6_GPIO_EN 0x10
++
+ /*
+ * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at
+ * 0x40 (128 bytes of ACPI, GPIO & TCO registers)
+@@ -541,12 +552,33 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, qui
+ static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev)
+ {
+ u32 region;
++ u8 enable;
+
+- pci_read_config_dword(dev, 0x40, &region);
+- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO");
++ /*
++ * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict
++ * with low legacy (and fixed) ports. We don't know the decoding
++ * priority and can't tell whether the legacy device or the one created
++ * here is really at that address. This happens on boards with broken
++ * BIOSes.
++ */
++
++ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
++ if (enable & ICH4_ACPI_EN) {
++ pci_read_config_dword(dev, ICH_PMBASE, &region);
++ region &= PCI_BASE_ADDRESS_IO_MASK;
++ if (region >= PCIBIOS_MIN_IO)
++ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
++ "ICH4 ACPI/GPIO/TCO");
++ }
+
+- pci_read_config_dword(dev, 0x58, &region);
+- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO");
++ pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable);
++ if (enable & ICH4_GPIO_EN) {
++ pci_read_config_dword(dev, ICH4_GPIOBASE, &region);
++ region &= PCI_BASE_ADDRESS_IO_MASK;
++ if (region >= PCIBIOS_MIN_IO)
++ quirk_io_region(dev, region, 64,
++ PCI_BRIDGE_RESOURCES + 1, "ICH4 GPIO");
++ }
+ }
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi);
+ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi);
+@@ -562,12 +594,25 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, qui
+ static void __devinit ich6_lpc_acpi_gpio(struct pci_dev *dev)
+ {
+ u32 region;
++ u8 enable;
+
+- pci_read_config_dword(dev, 0x40, &region);
+- quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH6 ACPI/GPIO/TCO");
++ pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable);
++ if (enable & ICH6_ACPI_EN) {
++ pci_read_config_dword(dev, ICH_PMBASE, &region);
++ region &= PCI_BASE_ADDRESS_IO_MASK;
++ if (region >= PCIBIOS_MIN_IO)
++ quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES,
++ "ICH6 ACPI/GPIO/TCO");
++ }
+
+- pci_read_config_dword(dev, 0x48, &region);
+- quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH6 GPIO");
++ pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable);
++ if (enable & ICH4_GPIO_EN) {
++ pci_read_config_dword(dev, ICH6_GPIOBASE, &region);
++ region &= PCI_BASE_ADDRESS_IO_MASK;
++ if (region >= PCIBIOS_MIN_IO)
++ quirk_io_region(dev, region, 64,
++ PCI_BRIDGE_RESOURCES + 1, "ICH6 GPIO");
++ }
+ }
+
+ static void __devinit ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize)
+@@ -2618,58 +2663,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
+
+ #endif /* CONFIG_PCI_MSI */
+
+-#ifdef CONFIG_PCI_IOV
+-
+-/*
+- * For Intel 82576 SR-IOV NIC, if BIOS doesn't allocate resources for the
+- * SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the
+- * old Flash Memory Space.
+- */
+-static void __devinit quirk_i82576_sriov(struct pci_dev *dev)
+-{
+- int pos, flags;
+- u32 bar, start, size;
+-
+- if (PAGE_SIZE > 0x10000)
+- return;
+-
+- flags = pci_resource_flags(dev, 0);
+- if ((flags & PCI_BASE_ADDRESS_SPACE) !=
+- PCI_BASE_ADDRESS_SPACE_MEMORY ||
+- (flags & PCI_BASE_ADDRESS_MEM_TYPE_MASK) !=
+- PCI_BASE_ADDRESS_MEM_TYPE_32)
+- return;
+-
+- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV);
+- if (!pos)
+- return;
+-
+- pci_read_config_dword(dev, pos + PCI_SRIOV_BAR, &bar);
+- if (bar & PCI_BASE_ADDRESS_MEM_MASK)
+- return;
+-
+- start = pci_resource_start(dev, 1);
+- size = pci_resource_len(dev, 1);
+- if (!start || size != 0x400000 || start & (size - 1))
+- return;
+-
+- pci_resource_flags(dev, 1) = 0;
+- pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
+- pci_write_config_dword(dev, pos + PCI_SRIOV_BAR, start);
+- pci_write_config_dword(dev, pos + PCI_SRIOV_BAR + 12, start + size / 2);
+-
+- dev_info(&dev->dev, "use Flash Memory Space for SR-IOV BARs\n");
+-}
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10c9, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e6, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e7, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x10e8, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150a, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x150d, quirk_i82576_sriov);
+-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1518, quirk_i82576_sriov);
+-
+-#endif /* CONFIG_PCI_IOV */
+-
+ /* Allow manual resource allocation for PCI hotplug bridges
+ * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For
+ * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6),
+diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
+index 6b72932..30f2b33 100644
+--- a/drivers/scsi/device_handler/scsi_dh_alua.c
++++ b/drivers/scsi/device_handler/scsi_dh_alua.c
+@@ -285,7 +285,8 @@ static void stpg_endio(struct request *req, int error)
+ print_alua_state(h->state));
+ }
+ done:
+- blk_put_request(req);
++ req->end_io_data = NULL;
++ __blk_put_request(req->q, req);
+ if (h->callback_fn) {
+ h->callback_fn(h->callback_data, err);
+ h->callback_fn = h->callback_data = NULL;
+diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
+index b47d7aa..e2fe165 100644
+--- a/drivers/staging/tidspbridge/rmgr/proc.c
++++ b/drivers/staging/tidspbridge/rmgr/proc.c
+@@ -781,12 +781,14 @@ int proc_begin_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+ (u32)pmpu_addr,
+ ul_size, dir);
+
++ mutex_lock(&proc_lock);
++
+ /* find requested memory are in cached mapping information */
+ map_obj = find_containing_mapping(pr_ctxt, (u32) pmpu_addr, ul_size);
+ if (!map_obj) {
+ pr_err("%s: find_containing_mapping failed\n", __func__);
+ status = -EFAULT;
+- goto err_out;
++ goto no_map;
+ }
+
+ if (memory_give_ownership(map_obj, (u32) pmpu_addr, ul_size, dir)) {
+@@ -795,6 +797,8 @@ int proc_begin_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+ status = -EFAULT;
+ }
+
++no_map:
++ mutex_unlock(&proc_lock);
+ err_out:
+
+ return status;
+@@ -819,21 +823,24 @@ int proc_end_dma(void *hprocessor, void *pmpu_addr, u32 ul_size,
+ (u32)pmpu_addr,
+ ul_size, dir);
+
++ mutex_lock(&proc_lock);
++
+ /* find requested memory are in cached mapping information */
+ map_obj = find_containing_mapping(pr_ctxt, (u32) pmpu_addr, ul_size);
+ if (!map_obj) {
+ pr_err("%s: find_containing_mapping failed\n", __func__);
+ status = -EFAULT;
+- goto err_out;
++ goto no_map;
+ }
+
+ if (memory_regain_ownership(map_obj, (u32) pmpu_addr, ul_size, dir)) {
+ pr_err("%s: InValid address parameters %p %x\n",
+ __func__, pmpu_addr, ul_size);
+ status = -EFAULT;
+- goto err_out;
+ }
+
++no_map:
++ mutex_unlock(&proc_lock);
+ err_out:
+ return status;
+ }
+@@ -1726,9 +1733,8 @@ int proc_un_map(void *hprocessor, void *map_addr,
+ (p_proc_object->hbridge_context, va_align, size_align);
+ }
+
+- mutex_unlock(&proc_lock);
+ if (status)
+- goto func_end;
++ goto unmap_failed;
+
+ /*
+ * A successful unmap should be followed by removal of map_obj
+@@ -1737,6 +1743,9 @@ int proc_un_map(void *hprocessor, void *map_addr,
+ */
+ remove_mapping_information(pr_ctxt, (u32) map_addr, size_align);
+
++unmap_failed:
++ mutex_unlock(&proc_lock);
++
+ func_end:
+ dev_dbg(bridge, "%s: hprocessor: 0x%p map_addr: 0x%p status: 0x%x\n",
+ __func__, hprocessor, map_addr, status);
+diff --git a/drivers/staging/winbond/core.h b/drivers/staging/winbond/core.h
+index d7b3aca..6160b2f 100644
+--- a/drivers/staging/winbond/core.h
++++ b/drivers/staging/winbond/core.h
+@@ -3,6 +3,7 @@
+
+ #include <linux/wireless.h>
+ #include <linux/types.h>
++#include <linux/delay.h>
+
+ #include "wbhal.h"
+ #include "mto.h"
+diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c
+index 366080b..7f19c8b 100644
+--- a/drivers/target/target_core_cdb.c
++++ b/drivers/target/target_core_cdb.c
+@@ -667,7 +667,13 @@ target_emulate_readcapacity(struct se_cmd *cmd)
+ {
+ struct se_device *dev = SE_DEV(cmd);
+ unsigned char *buf = cmd->t_task->t_task_buf;
+- u32 blocks = dev->transport->get_blocks(dev);
++ unsigned long long blocks_long = dev->transport->get_blocks(dev);
++ u32 blocks;
++
++ if (blocks_long >= 0x00000000ffffffff)
++ blocks = 0xffffffff;
++ else
++ blocks = (u32)blocks_long;
+
+ buf[0] = (blocks >> 24) & 0xff;
+ buf[1] = (blocks >> 16) & 0xff;
+diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
+index 3975df6..b3b881b 100644
+--- a/drivers/tty/serial/8250.c
++++ b/drivers/tty/serial/8250.c
+@@ -954,6 +954,23 @@ static int broken_efr(struct uart_8250_port *up)
+ return 0;
+ }
+
++static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
++{
++ unsigned char status;
++
++ status = serial_in(up, 0x04); /* EXCR2 */
++#define PRESL(x) ((x) & 0x30)
++ if (PRESL(status) == 0x10) {
++ /* already in high speed mode */
++ return 0;
++ } else {
++ status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
++ status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
++ serial_outp(up, 0x04, status);
++ }
++ return 1;
++}
++
+ /*
+ * We know that the chip has FIFOs. Does it have an EFR? The
+ * EFR is located in the same register position as the IIR and
+@@ -1025,12 +1042,8 @@ static void autoconfig_16550a(struct uart_8250_port *up)
+ quot = serial_dl_read(up);
+ quot <<= 3;
+
+- status1 = serial_in(up, 0x04); /* EXCR2 */
+- status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+- status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+- serial_outp(up, 0x04, status1);
+-
+- serial_dl_write(up, quot);
++ if (ns16550a_goto_highspeed(up))
++ serial_dl_write(up, quot);
+
+ serial_outp(up, UART_LCR, 0);
+
+@@ -3025,17 +3038,13 @@ void serial8250_resume_port(int line)
+ struct uart_8250_port *up = &serial8250_ports[line];
+
+ if (up->capabilities & UART_NATSEMI) {
+- unsigned char tmp;
+-
+ /* Ensure it's still in high speed mode */
+ serial_outp(up, UART_LCR, 0xE0);
+
+- tmp = serial_in(up, 0x04); /* EXCR2 */
+- tmp &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
+- tmp |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
+- serial_outp(up, 0x04, tmp);
++ ns16550a_goto_highspeed(up);
+
+ serial_outp(up, UART_LCR, 0);
++ up->port.uartclk = 921600*16;
+ }
+ uart_resume_port(&serial8250_reg, &up->port);
+ }
+diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
+index b62857b..37e13c3 100644
+--- a/drivers/tty/serial/mrst_max3110.c
++++ b/drivers/tty/serial/mrst_max3110.c
+@@ -51,7 +51,7 @@
+ struct uart_max3110 {
+ struct uart_port port;
+ struct spi_device *spi;
+- char name[24];
++ char name[SPI_NAME_SIZE];
+
+ wait_queue_head_t wq;
+ struct task_struct *main_thread;
+diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
+index f71e8e3..d370885 100644
+--- a/drivers/usb/core/hcd-pci.c
++++ b/drivers/usb/core/hcd-pci.c
+@@ -363,8 +363,7 @@ static int check_root_hub_suspended(struct device *dev)
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+
+- if (!(hcd->state == HC_STATE_SUSPENDED ||
+- hcd->state == HC_STATE_HALT)) {
++ if (HCD_RH_RUNNING(hcd)) {
+ dev_warn(dev, "Root hub is not suspended\n");
+ return -EBUSY;
+ }
+@@ -386,7 +385,7 @@ static int suspend_common(struct device *dev, bool do_wakeup)
+ if (retval)
+ return retval;
+
+- if (hcd->driver->pci_suspend) {
++ if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) {
+ /* Optimization: Don't suspend if a root-hub wakeup is
+ * pending and it would cause the HCD to wake up anyway.
+ */
+@@ -427,7 +426,7 @@ static int resume_common(struct device *dev, int event)
+ struct usb_hcd *hcd = pci_get_drvdata(pci_dev);
+ int retval;
+
+- if (hcd->state != HC_STATE_SUSPENDED) {
++ if (HCD_RH_RUNNING(hcd)) {
+ dev_dbg(dev, "can't resume, not suspended!\n");
+ return 0;
+ }
+@@ -442,7 +441,7 @@ static int resume_common(struct device *dev, int event)
+
+ clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags);
+
+- if (hcd->driver->pci_resume) {
++ if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) {
+ if (event != PM_EVENT_AUTO_RESUME)
+ wait_for_companions(pci_dev, hcd);
+
+@@ -475,10 +474,10 @@ static int hcd_pci_suspend_noirq(struct device *dev)
+
+ pci_save_state(pci_dev);
+
+- /* If the root hub is HALTed rather than SUSPENDed,
++ /* If the root hub is dead rather than suspended,
+ * disallow remote wakeup.
+ */
+- if (hcd->state == HC_STATE_HALT)
++ if (HCD_DEAD(hcd))
+ device_set_wakeup_enable(dev, 0);
+ dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev));
+
+diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
+index e935f71..c34a935 100644
+--- a/drivers/usb/core/hcd.c
++++ b/drivers/usb/core/hcd.c
+@@ -983,7 +983,7 @@ static int register_root_hub(struct usb_hcd *hcd)
+ spin_unlock_irq (&hcd_root_hub_lock);
+
+ /* Did the HC die before the root hub was registered? */
+- if (hcd->state == HC_STATE_HALT)
++ if (HCD_DEAD(hcd) || hcd->state == HC_STATE_HALT)
+ usb_hc_died (hcd); /* This time clean up */
+ }
+
+@@ -1089,13 +1089,10 @@ int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
+ * Check the host controller's state and add the URB to the
+ * endpoint's queue.
+ */
+- switch (hcd->state) {
+- case HC_STATE_RUNNING:
+- case HC_STATE_RESUMING:
++ if (HCD_RH_RUNNING(hcd)) {
+ urb->unlinked = 0;
+ list_add_tail(&urb->urb_list, &urb->ep->urb_list);
+- break;
+- default:
++ } else {
+ rc = -ESHUTDOWN;
+ goto done;
+ }
+@@ -1913,7 +1910,7 @@ int usb_hcd_get_frame_number (struct usb_device *udev)
+ {
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+- if (!HC_IS_RUNNING (hcd->state))
++ if (!HCD_RH_RUNNING(hcd))
+ return -ESHUTDOWN;
+ return hcd->driver->get_frame_number (hcd);
+ }
+@@ -1930,9 +1927,15 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
+
+ dev_dbg(&rhdev->dev, "bus %s%s\n",
+ (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
++ if (HCD_DEAD(hcd)) {
++ dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
++ return 0;
++ }
++
+ if (!hcd->driver->bus_suspend) {
+ status = -ENOENT;
+ } else {
++ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+ hcd->state = HC_STATE_QUIESCING;
+ status = hcd->driver->bus_suspend(hcd);
+ }
+@@ -1940,7 +1943,12 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
+ usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
+ hcd->state = HC_STATE_SUSPENDED;
+ } else {
+- hcd->state = old_state;
++ spin_lock_irq(&hcd_root_hub_lock);
++ if (!HCD_DEAD(hcd)) {
++ set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
++ hcd->state = old_state;
++ }
++ spin_unlock_irq(&hcd_root_hub_lock);
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+ "suspend", status);
+ }
+@@ -1955,9 +1963,13 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
+
+ dev_dbg(&rhdev->dev, "usb %s%s\n",
+ (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
++ if (HCD_DEAD(hcd)) {
++ dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
++ return 0;
++ }
+ if (!hcd->driver->bus_resume)
+ return -ENOENT;
+- if (hcd->state == HC_STATE_RUNNING)
++ if (HCD_RH_RUNNING(hcd))
+ return 0;
+
+ hcd->state = HC_STATE_RESUMING;
+@@ -1966,10 +1978,15 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
+ if (status == 0) {
+ /* TRSMRCY = 10 msec */
+ msleep(10);
+- usb_set_device_state(rhdev, rhdev->actconfig
+- ? USB_STATE_CONFIGURED
+- : USB_STATE_ADDRESS);
+- hcd->state = HC_STATE_RUNNING;
++ spin_lock_irq(&hcd_root_hub_lock);
++ if (!HCD_DEAD(hcd)) {
++ usb_set_device_state(rhdev, rhdev->actconfig
++ ? USB_STATE_CONFIGURED
++ : USB_STATE_ADDRESS);
++ set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
++ hcd->state = HC_STATE_RUNNING;
++ }
++ spin_unlock_irq(&hcd_root_hub_lock);
+ } else {
+ hcd->state = old_state;
+ dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
+@@ -2080,7 +2097,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd)
+ */
+ local_irq_save(flags);
+
+- if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) {
++ if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) {
+ rc = IRQ_NONE;
+ } else if (hcd->driver->irq(hcd) == IRQ_NONE) {
+ rc = IRQ_NONE;
+@@ -2114,6 +2131,8 @@ void usb_hc_died (struct usb_hcd *hcd)
+ dev_err (hcd->self.controller, "HC died; cleaning up\n");
+
+ spin_lock_irqsave (&hcd_root_hub_lock, flags);
++ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
++ set_bit(HCD_FLAG_DEAD, &hcd->flags);
+ if (hcd->rh_registered) {
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+@@ -2256,6 +2275,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
+ */
+ device_init_wakeup(&rhdev->dev, 1);
+
++ /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
++ * registered. But since the controller can die at any time,
++ * let's initialize the flag before touching the hardware.
++ */
++ set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
++
+ /* "reset" is misnamed; its role is now one-time init. the controller
+ * should already have been reset (and boot firmware kicked off etc).
+ */
+@@ -2323,6 +2348,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
+ return retval;
+
+ error_create_attr_group:
++ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+ if (HC_IS_RUNNING(hcd->state))
+ hcd->state = HC_STATE_QUIESCING;
+ spin_lock_irq(&hcd_root_hub_lock);
+@@ -2375,6 +2401,7 @@ void usb_remove_hcd(struct usb_hcd *hcd)
+ usb_get_dev(rhdev);
+ sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group);
+
++ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+ if (HC_IS_RUNNING (hcd->state))
+ hcd->state = HC_STATE_QUIESCING;
+
+diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
+index c14fc08..ae334b0 100644
+--- a/drivers/usb/core/urb.c
++++ b/drivers/usb/core/urb.c
+@@ -366,7 +366,16 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
+ if (xfertype == USB_ENDPOINT_XFER_ISOC) {
+ int n, len;
+
+- /* FIXME SuperSpeed isoc endpoints have up to 16 bursts */
++ /* SuperSpeed isoc endpoints have up to 16 bursts of up to
++ * 3 packets each
++ */
++ if (dev->speed == USB_SPEED_SUPER) {
++ int burst = 1 + ep->ss_ep_comp.bMaxBurst;
++ int mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes);
++ max *= burst;
++ max *= mult;
++ }
++
+ /* "high bandwidth" mode, 1-3 packets/uframe? */
+ if (dev->speed == USB_SPEED_HIGH) {
+ int mult = 1 + ((max >> 11) & 0x03);
+diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
+index 8a515f0..72ae77c 100644
+--- a/drivers/usb/host/ehci-hub.c
++++ b/drivers/usb/host/ehci-hub.c
+@@ -106,6 +106,27 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
+ ehci->owned_ports = 0;
+ }
+
++static int ehci_port_change(struct ehci_hcd *ehci)
++{
++ int i = HCS_N_PORTS(ehci->hcs_params);
++
++ /* First check if the controller indicates a change event */
++
++ if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
++ return 1;
++
++ /*
++ * Not all controllers appear to update this while going from D3 to D0,
++ * so check the individual port status registers as well
++ */
++
++ while (i--)
++ if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
++ return 1;
++
++ return 0;
++}
++
+ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+ bool suspending, bool do_wakeup)
+ {
+@@ -173,7 +194,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+ }
+
+ /* Does the root hub have a port wakeup pending? */
+- if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
++ if (!suspending && ehci_port_change(ehci))
+ usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
+index bdba8c5..c470cc8 100644
+--- a/drivers/usb/host/isp1760-hcd.c
++++ b/drivers/usb/host/isp1760-hcd.c
+@@ -33,6 +33,7 @@ struct isp1760_hcd {
+ struct inter_packet_info atl_ints[32];
+ struct inter_packet_info int_ints[32];
+ struct memory_chunk memory_pool[BLOCKS];
++ u32 atl_queued;
+
+ /* periodic schedule support */
+ #define DEFAULT_I_TDPS 1024
+@@ -850,6 +851,11 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh,
+ skip_map &= ~queue_entry;
+ isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG);
+
++ priv->atl_queued++;
++ if (priv->atl_queued == 2)
++ isp1760_writel(INTERRUPT_ENABLE_SOT_MASK,
++ hcd->regs + HC_INTERRUPT_ENABLE);
++
+ buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+ isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG);
+@@ -992,6 +998,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
+ u32 dw3;
+
+ status = 0;
++ priv->atl_queued--;
+
+ queue_entry = __ffs(done_map);
+ done_map &= ~(1 << queue_entry);
+@@ -1054,11 +1061,6 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
+ * device is not able to send data fast enough.
+ * This happens mostly on slower hardware.
+ */
+- printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: "
+- "%d of %zu done: %08x cur: %08x\n", qtd,
+- urb, qh, PTD_XFERRED_LENGTH(dw3),
+- qtd->length, done_map,
+- (1 << queue_entry));
+
+ /* RL counter = ERR counter */
+ dw3 &= ~(0xf << 19);
+@@ -1086,6 +1088,11 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
+ priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs +
+ atl_regs, sizeof(ptd));
+
++ priv->atl_queued++;
++ if (priv->atl_queued == 2)
++ isp1760_writel(INTERRUPT_ENABLE_SOT_MASK,
++ usb_hcd->regs + HC_INTERRUPT_ENABLE);
++
+ buffstatus = isp1760_readl(usb_hcd->regs +
+ HC_BUFFER_STATUS_REG);
+ buffstatus |= ATL_BUFFER;
+@@ -1191,6 +1198,9 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
+ skip_map = isp1760_readl(usb_hcd->regs +
+ HC_ATL_PTD_SKIPMAP_REG);
+ }
++ if (priv->atl_queued <= 1)
++ isp1760_writel(INTERRUPT_ENABLE_MASK,
++ usb_hcd->regs + HC_INTERRUPT_ENABLE);
+ }
+
+ static void do_intl_int(struct usb_hcd *usb_hcd)
+@@ -1770,7 +1780,7 @@ static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd)
+ goto leave;
+
+ isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG);
+- if (imask & HC_ATL_INT)
++ if (imask & (HC_ATL_INT | HC_SOT_INT))
+ do_atl_int(usb_hcd);
+
+ if (imask & HC_INTL_INT)
+diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h
+index 6931ef5..612bce5 100644
+--- a/drivers/usb/host/isp1760-hcd.h
++++ b/drivers/usb/host/isp1760-hcd.h
+@@ -69,6 +69,7 @@ void deinit_kmem_cache(void);
+
+ #define HC_INTERRUPT_ENABLE 0x314
+ #define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT)
++#define INTERRUPT_ENABLE_SOT_MASK (HC_INTL_INT | HC_SOT_INT | HC_EOT_INT)
+
+ #define HC_ISO_INT (1 << 9)
+ #define HC_ATL_INT (1 << 8)
+diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
+index 3289bf4..d3f0406 100644
+--- a/drivers/usb/host/xhci-ring.c
++++ b/drivers/usb/host/xhci-ring.c
+@@ -500,15 +500,26 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+ state->new_cycle_state = ~(state->new_cycle_state) & 0x1;
+ next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
+
++ /*
++ * If there is only one segment in a ring, find_trb_seg()'s while loop
++ * will not run, and it will return before it has a chance to see if it
++ * needs to toggle the cycle bit. It can't tell if the stalled transfer
++ * ended just before the link TRB on a one-segment ring, or if the TD
++ * wrapped around the top of the ring, because it doesn't have the TD in
++ * question. Look for the one-segment case where stalled TRB's address
++ * is greater than the new dequeue pointer address.
++ */
++ if (ep_ring->first_seg == ep_ring->first_seg->next &&
++ state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
++ state->new_cycle_state ^= 0x1;
++ xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state);
++
+ /* Don't update the ring cycle state for the producer (us). */
+ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+ state->new_deq_seg);
+ addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+ xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+ (unsigned long long) addr);
+- xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
+- ep_ring->dequeue = state->new_deq_ptr;
+- ep_ring->deq_seg = state->new_deq_seg;
+ }
+
+ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+@@ -951,9 +962,26 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
+ } else {
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+ ep_ctx->deq);
++ if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg,
++ dev->eps[ep_index].queued_deq_ptr) ==
++ (ep_ctx->deq & ~(EP_CTX_CYCLE_MASK))) {
++ /* Update the ring's dequeue segment and dequeue pointer
++ * to reflect the new position.
++ */
++ ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg;
++ ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr;
++ } else {
++ xhci_warn(xhci, "Mismatch between completed Set TR Deq "
++ "Ptr command & xHCI internal state.\n");
++ xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
++ dev->eps[ep_index].queued_deq_seg,
++ dev->eps[ep_index].queued_deq_ptr);
++ }
+ }
+
+ dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
++ dev->eps[ep_index].queued_deq_seg = NULL;
++ dev->eps[ep_index].queued_deq_ptr = NULL;
+ /* Restart any rings with pending URBs */
+ ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
+ }
+@@ -3229,6 +3257,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
+ u32 type = TRB_TYPE(TRB_SET_DEQ);
++ struct xhci_virt_ep *ep;
+
+ addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
+ if (addr == 0) {
+@@ -3237,6 +3266,14 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
+ deq_seg, deq_ptr);
+ return 0;
+ }
++ ep = &xhci->devs[slot_id]->eps[ep_index];
++ if ((ep->ep_state & SET_DEQ_PENDING)) {
++ xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
++ xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
++ return 0;
++ }
++ ep->queued_deq_seg = deq_seg;
++ ep->queued_deq_ptr = deq_ptr;
+ return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+ upper_32_bits(addr), trb_stream_id,
+ trb_slot_id | trb_ep_index | type, false);
+diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
+index 7f127df..62bc1bc 100644
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -644,6 +644,9 @@ struct xhci_ep_ctx {
+ #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
+ #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
+
++/* deq bitmasks */
++#define EP_CTX_CYCLE_MASK (1 << 0)
++
+
+ /**
+ * struct xhci_input_control_context
+@@ -746,6 +749,12 @@ struct xhci_virt_ep {
+ struct timer_list stop_cmd_timer;
+ int stop_cmds_pending;
+ struct xhci_hcd *xhci;
++ /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
++ * command. We'll need to update the ring's dequeue segment and dequeue
++ * pointer after the command completes.
++ */
++ struct xhci_segment *queued_deq_seg;
++ union xhci_trb *queued_deq_ptr;
+ /*
+ * Sometimes the xHC can not process isochronous endpoint ring quickly
+ * enough, and it will miss some isoc tds on the ring and generate
+diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
+index 7b8815d..14ac87e 100644
+--- a/drivers/usb/serial/ch341.c
++++ b/drivers/usb/serial/ch341.c
+@@ -75,6 +75,7 @@ static int debug;
+ static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x1a86, 0x7523) },
++ { USB_DEVICE(0x1a86, 0x5523) },
+ { },
+ };
+ MODULE_DEVICE_TABLE(usb, id_table);
+diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
+index bd5bd85..b382d9a 100644
+--- a/drivers/usb/serial/kobil_sct.c
++++ b/drivers/usb/serial/kobil_sct.c
+@@ -372,7 +372,7 @@ static void kobil_read_int_callback(struct urb *urb)
+ }
+
+ tty = tty_port_tty_get(&port->port);
+- if (urb->actual_length) {
++ if (tty && urb->actual_length) {
+
+ /* BEGIN DEBUG */
+ /*
+diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
+index 5f46838..75c7f45 100644
+--- a/drivers/usb/serial/option.c
++++ b/drivers/usb/serial/option.c
+@@ -652,7 +652,8 @@ static const struct usb_device_id option_ids[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
++ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff,
++ 0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) },
+diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
+index 546a521..2ff90a9 100644
+--- a/drivers/usb/serial/usb-serial.c
++++ b/drivers/usb/serial/usb-serial.c
+@@ -911,9 +911,8 @@ int usb_serial_probe(struct usb_interface *interface,
+ dev_err(&interface->dev, "No free urbs available\n");
+ goto probe_error;
+ }
+- buffer_size = serial->type->bulk_in_size;
+- if (!buffer_size)
+- buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
++ buffer_size = max_t(int, serial->type->bulk_in_size,
++ le16_to_cpu(endpoint->wMaxPacketSize));
+ port->bulk_in_size = buffer_size;
+ port->bulk_in_endpointAddress = endpoint->bEndpointAddress;
+ port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+diff --git a/fs/dcache.c b/fs/dcache.c
+index 611ffe9..a39fe47 100644
+--- a/fs/dcache.c
++++ b/fs/dcache.c
+@@ -296,8 +296,12 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent)
+ __releases(parent->d_lock)
+ __releases(dentry->d_inode->i_lock)
+ {
+- dentry->d_parent = NULL;
+ list_del(&dentry->d_u.d_child);
++ /*
++ * Inform try_to_ascend() that we are no longer attached to the
++ * dentry tree
++ */
++ dentry->d_flags |= DCACHE_DISCONNECTED;
+ if (parent)
+ spin_unlock(&parent->d_lock);
+ dentry_iput(dentry);
+@@ -1012,6 +1016,35 @@ void shrink_dcache_for_umount(struct super_block *sb)
+ }
+
+ /*
++ * This tries to ascend one level of parenthood, but
++ * we can race with renaming, so we need to re-check
++ * the parenthood after dropping the lock and check
++ * that the sequence number still matches.
++ */
++static struct dentry *try_to_ascend(struct dentry *old, int locked, unsigned seq)
++{
++ struct dentry *new = old->d_parent;
++
++ rcu_read_lock();
++ spin_unlock(&old->d_lock);
++ spin_lock(&new->d_lock);
++
++ /*
++ * might go back up the wrong parent if we have had a rename
++ * or deletion
++ */
++ if (new != old->d_parent ||
++ (old->d_flags & DCACHE_DISCONNECTED) ||
++ (!locked && read_seqretry(&rename_lock, seq))) {
++ spin_unlock(&new->d_lock);
++ new = NULL;
++ }
++ rcu_read_unlock();
++ return new;
++}
++
++
++/*
+ * Search for at least 1 mount point in the dentry's subdirs.
+ * We descend to the next level whenever the d_subdirs
+ * list is non-empty and continue searching.
+@@ -1066,24 +1099,10 @@ resume:
+ * All done at this level ... ascend and resume the search.
+ */
+ if (this_parent != parent) {
+- struct dentry *tmp;
+- struct dentry *child;
+-
+- tmp = this_parent->d_parent;
+- rcu_read_lock();
+- spin_unlock(&this_parent->d_lock);
+- child = this_parent;
+- this_parent = tmp;
+- spin_lock(&this_parent->d_lock);
+- /* might go back up the wrong parent if we have had a rename
+- * or deletion */
+- if (this_parent != child->d_parent ||
+- (!locked && read_seqretry(&rename_lock, seq))) {
+- spin_unlock(&this_parent->d_lock);
+- rcu_read_unlock();
++ struct dentry *child = this_parent;
++ this_parent = try_to_ascend(this_parent, locked, seq);
++ if (!this_parent)
+ goto rename_retry;
+- }
+- rcu_read_unlock();
+ next = child->d_u.d_child.next;
+ goto resume;
+ }
+@@ -1181,24 +1200,10 @@ resume:
+ * All done at this level ... ascend and resume the search.
+ */
+ if (this_parent != parent) {
+- struct dentry *tmp;
+- struct dentry *child;
+-
+- tmp = this_parent->d_parent;
+- rcu_read_lock();
+- spin_unlock(&this_parent->d_lock);
+- child = this_parent;
+- this_parent = tmp;
+- spin_lock(&this_parent->d_lock);
+- /* might go back up the wrong parent if we have had a rename
+- * or deletion */
+- if (this_parent != child->d_parent ||
+- (!locked && read_seqretry(&rename_lock, seq))) {
+- spin_unlock(&this_parent->d_lock);
+- rcu_read_unlock();
++ struct dentry *child = this_parent;
++ this_parent = try_to_ascend(this_parent, locked, seq);
++ if (!this_parent)
+ goto rename_retry;
+- }
+- rcu_read_unlock();
+ next = child->d_u.d_child.next;
+ goto resume;
+ }
+@@ -2942,28 +2947,14 @@ resume:
+ spin_unlock(&dentry->d_lock);
+ }
+ if (this_parent != root) {
+- struct dentry *tmp;
+- struct dentry *child;
+-
+- tmp = this_parent->d_parent;
++ struct dentry *child = this_parent;
+ if (!(this_parent->d_flags & DCACHE_GENOCIDE)) {
+ this_parent->d_flags |= DCACHE_GENOCIDE;
+ this_parent->d_count--;
+ }
+- rcu_read_lock();
+- spin_unlock(&this_parent->d_lock);
+- child = this_parent;
+- this_parent = tmp;
+- spin_lock(&this_parent->d_lock);
+- /* might go back up the wrong parent if we have had a rename
+- * or deletion */
+- if (this_parent != child->d_parent ||
+- (!locked && read_seqretry(&rename_lock, seq))) {
+- spin_unlock(&this_parent->d_lock);
+- rcu_read_unlock();
++ this_parent = try_to_ascend(this_parent, locked, seq);
++ if (!this_parent)
+ goto rename_retry;
+- }
+- rcu_read_unlock();
+ next = child->d_u.d_child.next;
+ goto resume;
+ }
+diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
+index b27ba71..75c968e 100644
+--- a/fs/ext3/namei.c
++++ b/fs/ext3/namei.c
+@@ -1540,8 +1540,8 @@ static int ext3_dx_add_entry(handle_t *handle, struct dentry *dentry,
+ goto cleanup;
+ node2 = (struct dx_node *)(bh2->b_data);
+ entries2 = node2->entries;
++ memset(&node2->fake, 0, sizeof(struct fake_dirent));
+ node2->fake.rec_len = ext3_rec_len_to_disk(sb->s_blocksize);
+- node2->fake.inode = 0;
+ BUFFER_TRACE(frame->bh, "get_write_access");
+ err = ext3_journal_get_write_access(handle, frame->bh);
+ if (err)
+diff --git a/fs/partitions/osf.c b/fs/partitions/osf.c
+index be03a0b..764b86a 100644
+--- a/fs/partitions/osf.c
++++ b/fs/partitions/osf.c
+@@ -10,7 +10,7 @@
+ #include "check.h"
+ #include "osf.h"
+
+-#define MAX_OSF_PARTITIONS 8
++#define MAX_OSF_PARTITIONS 18
+
+ int osf_partition(struct parsed_partitions *state)
+ {
+diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
+index dcd6a7c..ca29e03 100644
+--- a/include/linux/ftrace.h
++++ b/include/linux/ftrace.h
+@@ -428,6 +428,7 @@ extern void unregister_ftrace_graph(void);
+
+ extern void ftrace_graph_init_task(struct task_struct *t);
+ extern void ftrace_graph_exit_task(struct task_struct *t);
++extern void ftrace_graph_init_idle_task(struct task_struct *t, int cpu);
+
+ static inline int task_curr_ret_stack(struct task_struct *t)
+ {
+@@ -451,6 +452,7 @@ static inline void unpause_graph_tracing(void)
+
+ static inline void ftrace_graph_init_task(struct task_struct *t) { }
+ static inline void ftrace_graph_exit_task(struct task_struct *t) { }
++static inline void ftrace_graph_init_idle_task(struct task_struct *t, int cpu) { }
+
+ static inline int register_ftrace_graph(trace_func_graph_ret_t retfunc,
+ trace_func_graph_ent_t entryfunc)
+diff --git a/include/linux/hid.h b/include/linux/hid.h
+index d91c25e..fc5faf6 100644
+--- a/include/linux/hid.h
++++ b/include/linux/hid.h
+@@ -638,7 +638,7 @@ struct hid_driver {
+ struct hid_input *hidinput, struct hid_field *field,
+ struct hid_usage *usage, unsigned long **bit, int *max);
+ void (*feature_mapping)(struct hid_device *hdev,
+- struct hid_input *hidinput, struct hid_field *field,
++ struct hid_field *field,
+ struct hid_usage *usage);
+ #ifdef CONFIG_PM
+ int (*suspend)(struct hid_device *hdev, pm_message_t message);
+diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
+index ab46194..76d896c 100644
+--- a/include/linux/usb/ch9.h
++++ b/include/linux/usb/ch9.h
+@@ -585,6 +585,8 @@ struct usb_ss_ep_comp_descriptor {
+ #define USB_DT_SS_EP_COMP_SIZE 6
+ /* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+ #define USB_SS_MAX_STREAMS(p) (1 << (p & 0x1f))
++/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
++#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+
+ /*-------------------------------------------------------------------------*/
+
+diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
+index a854fe8..f21f599 100644
+--- a/include/linux/usb/hcd.h
++++ b/include/linux/usb/hcd.h
+@@ -99,6 +99,8 @@ struct usb_hcd {
+ #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
+ #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
+ #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
++#define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
++#define HCD_FLAG_DEAD 6 /* controller has died? */
+
+ /* The flags can be tested using these macros; they are likely to
+ * be slightly faster than test_bit().
+@@ -108,6 +110,8 @@ struct usb_hcd {
+ #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
+ #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
+ #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
++#define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
++#define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
+
+ /* Flags that get set only during HCD registration or removal. */
+ unsigned rh_registered:1;/* is root hub registered? */
+diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
+index c904913..45f3b9d 100644
+--- a/include/linux/usb/serial.h
++++ b/include/linux/usb/serial.h
+@@ -191,7 +191,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
+ * @id_table: pointer to a list of usb_device_id structures that define all
+ * of the devices this structure can support.
+ * @num_ports: the number of different ports this device will have.
+- * @bulk_in_size: bytes to allocate for bulk-in buffer (0 = end-point size)
++ * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
++ * (0 = end-point size)
+ * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
+ * @calc_num_ports: pointer to a function to determine how many ports this
+ * device has dynamically. It will be called after the probe()
+diff --git a/kernel/perf_event.c b/kernel/perf_event.c
+index 656222f..b22a2ef 100644
+--- a/kernel/perf_event.c
++++ b/kernel/perf_event.c
+@@ -4567,7 +4567,7 @@ static int perf_exclude_event(struct perf_event *event,
+ struct pt_regs *regs)
+ {
+ if (event->hw.state & PERF_HES_STOPPED)
+- return 0;
++ return 1;
+
+ if (regs) {
+ if (event->attr.exclude_user && user_mode(regs))
+@@ -4923,6 +4923,8 @@ static int perf_tp_event_match(struct perf_event *event,
+ struct perf_sample_data *data,
+ struct pt_regs *regs)
+ {
++ if (event->hw.state & PERF_HES_STOPPED)
++ return 0;
+ /*
+ * All tracepoints are from kernel-space.
+ */
+diff --git a/kernel/sched.c b/kernel/sched.c
+index 42eab5a..c164920 100644
+--- a/kernel/sched.c
++++ b/kernel/sched.c
+@@ -5572,7 +5572,7 @@ void __cpuinit init_idle(struct task_struct *idle, int cpu)
+ * The idle tasks have their own, simple scheduling class:
+ */
+ idle->sched_class = &idle_sched_class;
+- ftrace_graph_init_task(idle);
++ ftrace_graph_init_idle_task(idle, cpu);
+ }
+
+ /*
+diff --git a/kernel/smp.c b/kernel/smp.c
+index 9910744..9545489 100644
+--- a/kernel/smp.c
++++ b/kernel/smp.c
+@@ -450,7 +450,7 @@ void smp_call_function_many(const struct cpumask *mask,
+ {
+ struct call_function_data *data;
+ unsigned long flags;
+- int cpu, next_cpu, this_cpu = smp_processor_id();
++ int refs, cpu, next_cpu, this_cpu = smp_processor_id();
+
+ /*
+ * Can deadlock when called with interrupts disabled.
+@@ -461,7 +461,7 @@ void smp_call_function_many(const struct cpumask *mask,
+ WARN_ON_ONCE(cpu_online(this_cpu) && irqs_disabled()
+ && !oops_in_progress && !early_boot_irqs_disabled);
+
+- /* So, what's a CPU they want? Ignoring this one. */
++ /* Try to fastpath. So, what's a CPU they want? Ignoring this one. */
+ cpu = cpumask_first_and(mask, cpu_online_mask);
+ if (cpu == this_cpu)
+ cpu = cpumask_next_and(cpu, mask, cpu_online_mask);
+@@ -483,22 +483,49 @@ void smp_call_function_many(const struct cpumask *mask,
+
+ data = &__get_cpu_var(cfd_data);
+ csd_lock(&data->csd);
++
++ /* This BUG_ON verifies our reuse assertions and can be removed */
+ BUG_ON(atomic_read(&data->refs) || !cpumask_empty(data->cpumask));
+
++ /*
++ * The global call function queue list add and delete are protected
++ * by a lock, but the list is traversed without any lock, relying
++ * on the rcu list add and delete to allow safe concurrent traversal.
++ * We reuse the call function data without waiting for any grace
++ * period after some other cpu removes it from the global queue.
++ * This means a cpu might find our data block as it is being
++ * filled out.
++ *
++ * We hold off the interrupt handler on the other cpu by
++ * ordering our writes to the cpu mask vs our setting of the
++ * refs counter. We assert only the cpu owning the data block
++ * will set a bit in cpumask, and each bit will only be cleared
++ * by the subject cpu. Each cpu must first find its bit is
++ * set and then check that refs is set indicating the element is
++ * ready to be processed, otherwise it must skip the entry.
++ *
++ * On the previous iteration refs was set to 0 by another cpu.
++ * To avoid the use of transitivity, set the counter to 0 here
++ * so the wmb will pair with the rmb in the interrupt handler.
++ */
++ atomic_set(&data->refs, 0); /* convert 3rd to 1st party write */
++
+ data->csd.func = func;
+ data->csd.info = info;
+- cpumask_and(data->cpumask, mask, cpu_online_mask);
+- cpumask_clear_cpu(this_cpu, data->cpumask);
+
+- /*
+- * To ensure the interrupt handler gets an complete view
+- * we order the cpumask and refs writes and order the read
+- * of them in the interrupt handler. In addition we may
+- * only clear our own cpu bit from the mask.
+- */
++ /* Ensure 0 refs is visible before mask. Also orders func and info */
+ smp_wmb();
+
+- atomic_set(&data->refs, cpumask_weight(data->cpumask));
++ /* We rely on the "and" being processed before the store */
++ cpumask_and(data->cpumask, mask, cpu_online_mask);
++ cpumask_clear_cpu(this_cpu, data->cpumask);
++ refs = cpumask_weight(data->cpumask);
++
++ /* Some callers race with other cpus changing the passed mask */
++ if (unlikely(!refs)) {
++ csd_unlock(&data->csd);
++ return;
++ }
+
+ raw_spin_lock_irqsave(&call_function.lock, flags);
+ /*
+@@ -507,6 +534,12 @@ void smp_call_function_many(const struct cpumask *mask,
+ * will not miss any other list entries:
+ */
+ list_add_rcu(&data->csd.list, &call_function.queue);
++ /*
++ * We rely on the wmb() in list_add_rcu to complete our writes
++ * to the cpumask before this write to refs, which indicates
++ * data is on the list and is ready to be processed.
++ */
++ atomic_set(&data->refs, refs);
+ raw_spin_unlock_irqrestore(&call_function.lock, flags);
+
+ /*
+diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
+index f3dadae..888b611 100644
+--- a/kernel/trace/ftrace.c
++++ b/kernel/trace/ftrace.c
+@@ -3328,7 +3328,7 @@ static int start_graph_tracing(void)
+ /* The cpu_boot init_task->ret_stack will never be freed */
+ for_each_online_cpu(cpu) {
+ if (!idle_task(cpu)->ret_stack)
+- ftrace_graph_init_task(idle_task(cpu));
++ ftrace_graph_init_idle_task(idle_task(cpu), cpu);
+ }
+
+ do {
+@@ -3418,6 +3418,49 @@ void unregister_ftrace_graph(void)
+ mutex_unlock(&ftrace_lock);
+ }
+
++static DEFINE_PER_CPU(struct ftrace_ret_stack *, idle_ret_stack);
++
++static void
++graph_init_task(struct task_struct *t, struct ftrace_ret_stack *ret_stack)
++{
++ atomic_set(&t->tracing_graph_pause, 0);
++ atomic_set(&t->trace_overrun, 0);
++ t->ftrace_timestamp = 0;
++ /* make curr_ret_stack visable before we add the ret_stack */
++ smp_wmb();
++ t->ret_stack = ret_stack;
++}
++
++/*
++ * Allocate a return stack for the idle task. May be the first
++ * time through, or it may be done by CPU hotplug online.
++ */
++void ftrace_graph_init_idle_task(struct task_struct *t, int cpu)
++{
++ t->curr_ret_stack = -1;
++ /*
++ * The idle task has no parent, it either has its own
++ * stack or no stack at all.
++ */
++ if (t->ret_stack)
++ WARN_ON(t->ret_stack != per_cpu(idle_ret_stack, cpu));
++
++ if (ftrace_graph_active) {
++ struct ftrace_ret_stack *ret_stack;
++
++ ret_stack = per_cpu(idle_ret_stack, cpu);
++ if (!ret_stack) {
++ ret_stack = kmalloc(FTRACE_RETFUNC_DEPTH
++ * sizeof(struct ftrace_ret_stack),
++ GFP_KERNEL);
++ if (!ret_stack)
++ return;
++ per_cpu(idle_ret_stack, cpu) = ret_stack;
++ }
++ graph_init_task(t, ret_stack);
++ }
++}
++
+ /* Allocate a return stack for newly created task */
+ void ftrace_graph_init_task(struct task_struct *t)
+ {
+@@ -3433,12 +3476,7 @@ void ftrace_graph_init_task(struct task_struct *t)
+ GFP_KERNEL);
+ if (!ret_stack)
+ return;
+- atomic_set(&t->tracing_graph_pause, 0);
+- atomic_set(&t->trace_overrun, 0);
+- t->ftrace_timestamp = 0;
+- /* make curr_ret_stack visable before we add the ret_stack */
+- smp_wmb();
+- t->ret_stack = ret_stack;
++ graph_init_task(t, ret_stack);
+ }
+ }
+
+diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
+index 57d344c..35d046b 100644
+--- a/net/sunrpc/clnt.c
++++ b/net/sunrpc/clnt.c
+@@ -436,7 +436,9 @@ void rpc_killall_tasks(struct rpc_clnt *clnt)
+ if (!(rovr->tk_flags & RPC_TASK_KILLED)) {
+ rovr->tk_flags |= RPC_TASK_KILLED;
+ rpc_exit(rovr, -EIO);
+- rpc_wake_up_queued_task(rovr->tk_waitqueue, rovr);
++ if (RPC_IS_QUEUED(rovr))
++ rpc_wake_up_queued_task(rovr->tk_waitqueue,
++ rovr);
+ }
+ }
+ spin_unlock(&clnt->cl_lock);
+diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c
+index 59e5994..17c3e3a 100644
+--- a/net/sunrpc/sched.c
++++ b/net/sunrpc/sched.c
+@@ -637,14 +637,12 @@ static void __rpc_execute(struct rpc_task *task)
+ save_callback = task->tk_callback;
+ task->tk_callback = NULL;
+ save_callback(task);
+- }
+-
+- /*
+- * Perform the next FSM step.
+- * tk_action may be NULL when the task has been killed
+- * by someone else.
+- */
+- if (!RPC_IS_QUEUED(task)) {
++ } else {
++ /*
++ * Perform the next FSM step.
++ * tk_action may be NULL when the task has been killed
++ * by someone else.
++ */
+ if (task->tk_action == NULL)
+ break;
+ task->tk_action(task);
+diff --git a/security/tomoyo/file.c b/security/tomoyo/file.c
+index 9d32f18..cb09f1f 100644
+--- a/security/tomoyo/file.c
++++ b/security/tomoyo/file.c
+@@ -927,7 +927,7 @@ int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
+ struct path *path, const int flag)
+ {
+ const u8 acc_mode = ACC_MODE(flag);
+- int error = -ENOMEM;
++ int error = 0;
+ struct tomoyo_path_info buf;
+ struct tomoyo_request_info r;
+ int idx;
+@@ -938,9 +938,6 @@ int tomoyo_check_open_permission(struct tomoyo_domain_info *domain,
+ buf.name = NULL;
+ r.mode = TOMOYO_CONFIG_DISABLED;
+ idx = tomoyo_read_lock();
+- if (!tomoyo_get_realpath(&buf, path))
+- goto out;
+- error = 0;
+ /*
+ * If the filename is specified by "deny_rewrite" keyword,
+ * we need to check "allow_rewrite" permission when the filename is not
+diff --git a/sound/drivers/aloop.c b/sound/drivers/aloop.c
+index 12b44b0..a0da775 100644
+--- a/sound/drivers/aloop.c
++++ b/sound/drivers/aloop.c
+@@ -482,8 +482,9 @@ static unsigned int loopback_pos_update(struct loopback_cable *cable)
+ cable->streams[SNDRV_PCM_STREAM_CAPTURE];
+ unsigned long delta_play = 0, delta_capt = 0;
+ unsigned int running;
++ unsigned long flags;
+
+- spin_lock(&cable->lock);
++ spin_lock_irqsave(&cable->lock, flags);
+ running = cable->running ^ cable->pause;
+ if (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) {
+ delta_play = jiffies - dpcm_play->last_jiffies;
+@@ -495,10 +496,8 @@ static unsigned int loopback_pos_update(struct loopback_cable *cable)
+ dpcm_capt->last_jiffies += delta_capt;
+ }
+
+- if (delta_play == 0 && delta_capt == 0) {
+- spin_unlock(&cable->lock);
+- return running;
+- }
++ if (delta_play == 0 && delta_capt == 0)
++ goto unlock;
+
+ if (delta_play > delta_capt) {
+ loopback_bytepos_update(dpcm_play, delta_play - delta_capt,
+@@ -510,14 +509,14 @@ static unsigned int loopback_pos_update(struct loopback_cable *cable)
+ delta_capt = delta_play;
+ }
+
+- if (delta_play == 0 && delta_capt == 0) {
+- spin_unlock(&cable->lock);
+- return running;
+- }
++ if (delta_play == 0 && delta_capt == 0)
++ goto unlock;
++
+ /* note delta_capt == delta_play at this moment */
+ loopback_bytepos_update(dpcm_capt, delta_capt, BYTEPOS_UPDATE_COPY);
+ loopback_bytepos_update(dpcm_play, delta_play, BYTEPOS_UPDATE_POSONLY);
+- spin_unlock(&cable->lock);
++ unlock:
++ spin_unlock_irqrestore(&cable->lock, flags);
+ return running;
+ }
+
+diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
+index 22dbd91..448dd01 100644
+--- a/sound/pci/asihpi/hpioctl.c
++++ b/sound/pci/asihpi/hpioctl.c
+@@ -155,6 +155,11 @@ long asihpi_hpi_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+ goto out;
+ }
+
++ if (hm->h.adapter_index >= HPI_MAX_ADAPTERS) {
++ err = -EINVAL;
++ goto out;
++ }
++
+ pa = &adapters[hm->h.adapter_index];
+ hr->h.size = 0;
+ if (hm->h.object == HPI_OBJ_SUBSYSTEM) {
+diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
+index 1bff80c..b932154 100644
+--- a/sound/pci/ctxfi/ctatc.c
++++ b/sound/pci/ctxfi/ctatc.c
+@@ -869,7 +869,7 @@ spdif_passthru_playback_setup(struct ct_atc *atc, struct ct_atc_pcm *apcm)
+ mutex_lock(&atc->atc_mutex);
+ dao->ops->get_spos(dao, &status);
+ if (((status >> 24) & IEC958_AES3_CON_FS) != iec958_con_fs) {
+- status &= ((~IEC958_AES3_CON_FS) << 24);
++ status &= ~(IEC958_AES3_CON_FS << 24);
+ status |= (iec958_con_fs << 24);
+ dao->ops->set_spos(dao, status);
+ dao->ops->commit_write(dao);
+diff --git a/sound/pci/ctxfi/ctdaio.c b/sound/pci/ctxfi/ctdaio.c
+index af56eb9..47d9ea9 100644
+--- a/sound/pci/ctxfi/ctdaio.c
++++ b/sound/pci/ctxfi/ctdaio.c
+@@ -176,6 +176,7 @@ static int dao_set_left_input(struct dao *dao, struct rsc *input)
+ if (!entry)
+ return -ENOMEM;
+
++ dao->ops->clear_left_input(dao);
+ /* Program master and conjugate resources */
+ input->ops->master(input);
+ daio->rscl.ops->master(&daio->rscl);
+@@ -204,6 +205,7 @@ static int dao_set_right_input(struct dao *dao, struct rsc *input)
+ if (!entry)
+ return -ENOMEM;
+
++ dao->ops->clear_right_input(dao);
+ /* Program master and conjugate resources */
+ input->ops->master(input);
+ daio->rscr.ops->master(&daio->rscr);
+diff --git a/sound/pci/ctxfi/ctmixer.c b/sound/pci/ctxfi/ctmixer.c
+index 15c1e72..c3519ff 100644
+--- a/sound/pci/ctxfi/ctmixer.c
++++ b/sound/pci/ctxfi/ctmixer.c
+@@ -566,19 +566,6 @@ static int ct_spdif_get_mask(struct snd_kcontrol *kcontrol,
+ return 0;
+ }
+
+-static int ct_spdif_default_get(struct snd_kcontrol *kcontrol,
+- struct snd_ctl_elem_value *ucontrol)
+-{
+- unsigned int status = SNDRV_PCM_DEFAULT_CON_SPDIF;
+-
+- ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+- ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+- ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+- ucontrol->value.iec958.status[3] = (status >> 24) & 0xff;
+-
+- return 0;
+-}
+-
+ static int ct_spdif_get(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+ {
+@@ -586,6 +573,10 @@ static int ct_spdif_get(struct snd_kcontrol *kcontrol,
+ unsigned int status;
+
+ atc->spdif_out_get_status(atc, &status);
++
++ if (status == 0)
++ status = SNDRV_PCM_DEFAULT_CON_SPDIF;
++
+ ucontrol->value.iec958.status[0] = (status >> 0) & 0xff;
+ ucontrol->value.iec958.status[1] = (status >> 8) & 0xff;
+ ucontrol->value.iec958.status[2] = (status >> 16) & 0xff;
+@@ -629,7 +620,7 @@ static struct snd_kcontrol_new iec958_default_ctl = {
+ .name = SNDRV_CTL_NAME_IEC958("", PLAYBACK, DEFAULT),
+ .count = 1,
+ .info = ct_spdif_info,
+- .get = ct_spdif_default_get,
++ .get = ct_spdif_get,
+ .put = ct_spdif_put,
+ .private_value = MIXER_IEC958_DEFAULT
+ };
+diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
+index 4261bb8..acd2099 100644
+--- a/sound/pci/hda/patch_realtek.c
++++ b/sound/pci/hda/patch_realtek.c
+@@ -394,6 +394,7 @@ struct alc_spec {
+ /* other flags */
+ unsigned int no_analog :1; /* digital I/O only */
+ unsigned int dual_adc_switch:1; /* switch ADCs (for ALC275) */
++ unsigned int single_input_src:1;
+ int init_amp;
+ int codec_variant; /* flag for other variants */
+
+@@ -3919,6 +3920,8 @@ static struct hda_amp_list alc880_lg_loopbacks[] = {
+ * Common callbacks
+ */
+
++static void alc_init_special_input_src(struct hda_codec *codec);
++
+ static int alc_init(struct hda_codec *codec)
+ {
+ struct alc_spec *spec = codec->spec;
+@@ -3929,6 +3932,7 @@ static int alc_init(struct hda_codec *codec)
+
+ for (i = 0; i < spec->num_init_verbs; i++)
+ snd_hda_sequence_write(codec, spec->init_verbs[i]);
++ alc_init_special_input_src(codec);
+
+ if (spec->init_hook)
+ spec->init_hook(codec);
+@@ -5151,7 +5155,9 @@ static const char *alc_get_line_out_pfx(const struct auto_pin_cfg *cfg,
+
+ switch (cfg->line_out_type) {
+ case AUTO_PIN_SPEAKER_OUT:
+- return "Speaker";
++ if (cfg->line_outs == 1)
++ return "Speaker";
++ break;
+ case AUTO_PIN_HP_OUT:
+ return "Headphone";
+ default:
+@@ -5205,16 +5211,19 @@ static int alc880_auto_create_multi_out_ctls(struct alc_spec *spec,
+ return err;
+ } else {
+ const char *name = pfx;
+- if (!name)
++ int index = i;
++ if (!name) {
+ name = chname[i];
++ index = 0;
++ }
+ err = __add_pb_vol_ctrl(spec, ALC_CTL_WIDGET_VOL,
+- name, i,
++ name, index,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 0,
+ HDA_OUTPUT));
+ if (err < 0)
+ return err;
+ err = __add_pb_sw_ctrl(spec, ALC_CTL_BIND_MUTE,
+- name, i,
++ name, index,
+ HDA_COMPOSE_AMP_VAL(nid, 3, 2,
+ HDA_INPUT));
+ if (err < 0)
+@@ -5585,6 +5594,7 @@ static void fixup_single_adc(struct hda_codec *codec)
+ spec->capsrc_nids += i;
+ spec->adc_nids += i;
+ spec->num_adc_nids = 1;
++ spec->single_input_src = 1;
+ }
+ }
+
+@@ -5596,6 +5606,16 @@ static void fixup_dual_adc_switch(struct hda_codec *codec)
+ init_capsrc_for_pin(codec, spec->int_mic.pin);
+ }
+
++/* initialize some special cases for input sources */
++static void alc_init_special_input_src(struct hda_codec *codec)
++{
++ struct alc_spec *spec = codec->spec;
++ if (spec->dual_adc_switch)
++ fixup_dual_adc_switch(codec);
++ else if (spec->single_input_src)
++ init_capsrc_for_pin(codec, spec->autocfg.inputs[0].pin);
++}
++
+ static void set_capture_mixer(struct hda_codec *codec)
+ {
+ struct alc_spec *spec = codec->spec;
+@@ -5611,7 +5631,7 @@ static void set_capture_mixer(struct hda_codec *codec)
+ int mux = 0;
+ int num_adcs = spec->num_adc_nids;
+ if (spec->dual_adc_switch)
+- fixup_dual_adc_switch(codec);
++ num_adcs = 1;
+ else if (spec->auto_mic)
+ fixup_automic_adc(codec);
+ else if (spec->input_mux) {
+@@ -5620,8 +5640,6 @@ static void set_capture_mixer(struct hda_codec *codec)
+ else if (spec->input_mux->num_items == 1)
+ fixup_single_adc(codec);
+ }
+- if (spec->dual_adc_switch)
+- num_adcs = 1;
+ spec->cap_mixer = caps[mux][num_adcs - 1];
+ }
+ }
+@@ -10748,6 +10766,7 @@ static struct alc_config_preset alc882_presets[] = {
+ */
+ enum {
+ PINFIX_ABIT_AW9D_MAX,
++ PINFIX_LENOVO_Y530,
+ PINFIX_PB_M5210,
+ PINFIX_ACER_ASPIRE_7736,
+ };
+@@ -10762,6 +10781,14 @@ static const struct alc_fixup alc882_fixups[] = {
+ { }
+ }
+ },
++ [PINFIX_LENOVO_Y530] = {
++ .type = ALC_FIXUP_PINS,
++ .v.pins = (const struct alc_pincfg[]) {
++ { 0x15, 0x99130112 }, /* rear int speakers */
++ { 0x16, 0x99130111 }, /* subwoofer */
++ { }
++ }
++ },
+ [PINFIX_PB_M5210] = {
+ .type = ALC_FIXUP_VERBS,
+ .v.verbs = (const struct hda_verb[]) {
+@@ -10777,6 +10804,7 @@ static const struct alc_fixup alc882_fixups[] = {
+
+ static struct snd_pci_quirk alc882_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x1025, 0x0155, "Packard-Bell M5120", PINFIX_PB_M5210),
++ SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", PINFIX_LENOVO_Y530),
+ SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
+ SND_PCI_QUIRK(0x1025, 0x0296, "Acer Aspire 7736z", PINFIX_ACER_ASPIRE_7736),
+ {}
+@@ -10829,23 +10857,28 @@ static void alc882_auto_init_hp_out(struct hda_codec *codec)
+ hda_nid_t pin, dac;
+ int i;
+
+- for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) {
+- pin = spec->autocfg.hp_pins[i];
+- if (!pin)
+- break;
+- dac = spec->multiout.hp_nid;
+- if (!dac)
+- dac = spec->multiout.dac_nids[0]; /* to front */
+- alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
++ if (spec->autocfg.line_out_type != AUTO_PIN_HP_OUT) {
++ for (i = 0; i < ARRAY_SIZE(spec->autocfg.hp_pins); i++) {
++ pin = spec->autocfg.hp_pins[i];
++ if (!pin)
++ break;
++ dac = spec->multiout.hp_nid;
++ if (!dac)
++ dac = spec->multiout.dac_nids[0]; /* to front */
++ alc882_auto_set_output_and_unmute(codec, pin, PIN_HP, dac);
++ }
+ }
+- for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
+- pin = spec->autocfg.speaker_pins[i];
+- if (!pin)
+- break;
+- dac = spec->multiout.extra_out_nid[0];
+- if (!dac)
+- dac = spec->multiout.dac_nids[0]; /* to front */
+- alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
++
++ if (spec->autocfg.line_out_type != AUTO_PIN_SPEAKER_OUT) {
++ for (i = 0; i < ARRAY_SIZE(spec->autocfg.speaker_pins); i++) {
++ pin = spec->autocfg.speaker_pins[i];
++ if (!pin)
++ break;
++ dac = spec->multiout.extra_out_nid[0];
++ if (!dac)
++ dac = spec->multiout.dac_nids[0]; /* to front */
++ alc882_auto_set_output_and_unmute(codec, pin, PIN_OUT, dac);
++ }
+ }
+ }
+
+diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
+index bd7b123..052062d 100644
+--- a/sound/pci/hda/patch_sigmatel.c
++++ b/sound/pci/hda/patch_sigmatel.c
+@@ -757,7 +757,7 @@ static int stac92xx_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e
+ struct sigmatel_spec *spec = codec->spec;
+ unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ const struct hda_input_mux *imux = spec->input_mux;
+- unsigned int idx, prev_idx;
++ unsigned int idx, prev_idx, didx;
+
+ idx = ucontrol->value.enumerated.item[0];
+ if (idx >= imux->num_items)
+@@ -769,7 +769,8 @@ static int stac92xx_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e
+ snd_hda_codec_write_cache(codec, spec->mux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+ imux->items[idx].index);
+- if (prev_idx >= spec->num_analog_muxes) {
++ if (prev_idx >= spec->num_analog_muxes &&
++ spec->mux_nids[adc_idx] != spec->dmux_nids[adc_idx]) {
+ imux = spec->dinput_mux;
+ /* 0 = analog */
+ snd_hda_codec_write_cache(codec,
+@@ -779,9 +780,13 @@ static int stac92xx_mux_enum_put(struct snd_kcontrol *kcontrol, struct snd_ctl_e
+ }
+ } else {
+ imux = spec->dinput_mux;
++ /* first dimux item is hardcoded to select analog imux,
++ * so lets skip it
++ */
++ didx = idx - spec->num_analog_muxes + 1;
+ snd_hda_codec_write_cache(codec, spec->dmux_nids[adc_idx], 0,
+ AC_VERB_SET_CONNECT_SEL,
+- imux->items[idx - 1].index);
++ imux->items[didx].index);
+ }
+ spec->cur_mux[adc_idx] = idx;
+ return 1;
+diff --git a/sound/soc/pxa/z2.c b/sound/soc/pxa/z2.c
+index 3ceaef6..838a0d5 100644
+--- a/sound/soc/pxa/z2.c
++++ b/sound/soc/pxa/z2.c
+@@ -147,7 +147,7 @@ static int z2_wm8750_init(struct snd_soc_pcm_runtime *rtd)
+ snd_soc_dapm_disable_pin(dapm, "LINPUT3");
+ snd_soc_dapm_disable_pin(dapm, "RINPUT3");
+ snd_soc_dapm_disable_pin(dapm, "OUT3");
+- snd_soc_dapm_disable_pin(dapm, "MONO");
++ snd_soc_dapm_disable_pin(dapm, "MONO1");
+
+ /* Add z2 specific widgets */
+ snd_soc_dapm_new_controls(dapm, wm8750_dapm_widgets,
+diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN
+index 97d7656..26d4d3f 100755
+--- a/tools/perf/util/PERF-VERSION-GEN
++++ b/tools/perf/util/PERF-VERSION-GEN
+@@ -23,10 +23,10 @@ if test -d ../../.git -o -f ../../.git &&
+ then
+ VN=$(echo "$VN" | sed -e 's/-/./g');
+ else
+- eval `grep '^VERSION\s*=' ../../Makefile|tr -d ' '`
+- eval `grep '^PATCHLEVEL\s*=' ../../Makefile|tr -d ' '`
+- eval `grep '^SUBLEVEL\s*=' ../../Makefile|tr -d ' '`
+- eval `grep '^EXTRAVERSION\s*=' ../../Makefile|tr -d ' '`
++ eval $(grep '^VERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
++ eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
++ eval $(grep '^SUBLEVEL[[:space:]]*=' ../../Makefile|tr -d ' ')
++ eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../Makefile|tr -d ' ')
+
+ VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
+ fi