Release notes take the form of the following optional categories:
[Optional short blurb/summary]
* Breaking changes
* Security
* Features
* Bug fixes
* Cleanups

portage-3.0.64 (UNRELEASED)
--------------

Bug fixes:
* ctypes: Add workaround for loading libc on musl.

* util: set a timeout for urlopen calls (bug #926221).

portage-3.0.63 (2024-02-25)
--------------

Bug fixes:
* emerge: Skip installed packages with emptytree in depgraph selection (bug #651018).

* bin/install-qa-check.d: 90gcc-warnings: drop warnings with too many FPs (bug #925460).

* AsyncioEventLoop: Call process.run_exitfuncs() before close (bug #925240).

  Fixes hang with FEATURES="network-sandbox-proxy" or FEATURES="distcc".

* SchedulerInterface/PollScheduler: Add _loop property (bug #925333).

  Fixes erroneous assert.

* _dynamic_deps_preload: Fix settings reference (bug #925350).

  Fix KeyError with --dynamic-deps.

* process.spawn: Fix logic for missing libc.unshare on musl (bug #925311).

  Fix handling when we can't unshare where we might e.g. modify the hostname
  of the real system on musl.

* dbapi: Fix TypeError when passing Exception to warnings.warn (bug #922935).

  Fix testUpdateDbentryDbapiTestCase.

* _start_proc: Prevent premature ForkProcess garbage collection (bug #925456).

  Fix warnings/errors like "[ERROR] Task was destroyed but it is pending!".

Cleanups:
* More asyncio porting.

portage-3.0.62 (2024-02-22)
--------------

This release has a lot of misc. bug fixes as well as many asyncio fixes from Zac to
kill off unsafe fork use.

Features:
* cnf: make.conf.example.arc: Add for the arc arch.

* ELF: Add entries for ARC machines

* bintree: Use urllib to parse PORTAGE_BINHOST / sync-uri so IPv6 works (bug #921400).

* FEATURES: Add FEATURES="merge-wait", enabled by default, to control whether
  we do parallel merges of images to the live filesystem (bug #663324).

  If enabled, we serialize these merges.

  For now, this makes FEATURES="parallel-install" a no-op, but in future, it
  will be improved to allow parallel merges, just not while any packages are
  compiling.

* estrip: Add FEATURES="dedupdebug" (bug #906368).

  This uses sys-devel/dwz to deduplicate installed DWARF debug information.

  Future improvements may be made for multifile support.

* Support PROPERTIES="test_privileged" to not drop privileges for tests (bug #924585).

Bug fixes:
* vartree: Make _needs_move() resilient to corrupt files on the live filesystem
  (do a full copy/replace).

* binpkgs: Handle SignatureException during package moves (bug #922142).

* gpkg, bintree, binpkg: Add missing newlines to signed binpkg update notice.

* emerge: Backtrack consistently regardless of --fetchonly (bug #922038).

* emaint: Cleanup duplicate 'usage:' output.

* installed_dynlibs: Resolve *.so symlinks (bug #921170).

* bin: Consistently prefix eqawarn with 'QA Notice' (bug #728046).

* _overlap_dnf: Deduplicate any-of blocks which improves performance (bug #891137).

* tests: Handle larger PAGE_SIZE in environment size check (bug #923368).

Cleanups:
* tests: Add a job with multiprocessing set to the 'spawn' method.

* tests: Fix missing playground cleanups.

* process.spawn: Add abstraction for os.fork() to allow migrating callers to it.

portage-3.0.61 (2024-01-05)
--------------

A small set of binpkg robustness fixes.

Bug fixes:
* BinpkgFetcher: Preserve mtime (bug #921208).

* bintree: Don't call trust helper unless bindb is writable (bug #915842, bug #920180).

* bintree: Avoid unnecessary build id incrementation (bug #921208).

* bintree: Handle inject failures (bug #921327).

* emaint: merges: Fix TrackingFile for utf8_mode (bug #921181).

portage-3.0.60 (2024-01-02)
--------------

A small set of binpkg robustness fixes.

Bug fixes:
* EbuildBinpkg: Avoid crash with verification failure in some cases (bug #921089).

* dbapi: Raise CorruptionKeyError - which is treated as a warning - during pkgmoves
  to avoid falling over in the event of a corrupt Packages index (bug #920828).

* EbuildFetchTestCase: Fix key order assumption (bug #921107).

* gpkg: Fix basename handling via aux_update (in particular with FEATURES="binpkg-multi-instance")
  (bug #920828).

portage-3.0.59 (2023-12-27)
--------------

Features:
* emerge: depclean now returns with failure if no packages are matched
  (bug #917120).

* bintree: Support 'file://' scheme for binhost sync-uri (bug #920537).

* sync: git: Include signing key and git revision in log output with --verbose
  or if a failure occurs.

Bug fixes:
* Scheduler: Handle aborted unpack more gracefully (bug #920258).

* Scheduler: Handle SignatureException in _run_pkg_pretend to give a proper
  error message if a signature could not be verified, rather than crashing out
  (bug #920258).

* ebuild: Improve 'command not found' regex for the dash shell (bug #822033).

* ebuild: Do not skip 'command not found' QA warnings for configure (bug #245716).

* emerge: Fix --binpkg-respect-use output optimization (was broken by refactoring
  for ROOT support).

* depgraph: Use strip_libc_deps in _eliminate_rebuilds (bug #915494).

* depgraph: Handle IDEPEND circular dependencies for depclean (bug #916135).

* bindbapi: Update Packages index when signed binpkgs are invalidated post-updates
  (bug #920095).

* _global_updates: Take a lock when performing updates (bug #587088, bug #920095).

* make.conf(5): Fix note about binpkg extension for gpkg.

* addread, addwrite, adddeny, addpredict: Warn about passing a colon-separated
  list of paths as argument (bug #920654).

portage-3.0.58 (2023-12-14)
--------------

Breaking changes:
* Switch BINPKG_FORMAT to "gpkg" by default (bug #912672).

portage-3.0.57 (2023-12-10)
--------------

This release has a series of binpkg robustness fixes. Notably, it includes
a workaround/fix for binpkgs built against a newer glibc to ensure that they
aren't merged on a binpkg consumer before merging a newer glibc, which has been
a longstanding cause of frustration for binpkg users.

Features:
* emerge: Make --binpkg-changed-deps output far more concise (don't show
  packages missing from the merge list).

* ebuild: Inject implicit libc RDEPEND. This avoids "bricking" systems when
  using binpkgs built against a newer glibc (bug #753500, bug #913628).

* BinpkgVerifier: Improve error message on stale binpkg index. This became
  more common with the portage-3.0.52 default change to FEATURES="pkgdir-index-trusted"
  (bug #915474).

Bug fixes:
* Fix package moves for signed binary packages by deleting the old binpkg
  if it cannot be re-signed, rather than crashing (bug #919419).

* Set SYSROOT appropriately for best_version and has_version so that they work
  when cross-compiling and IPC is disabled.

* bindbapi: Add missing SIZE key for binpkg-multi-instance (bug #906675,
  bug #918597, bug #919668).

* resolver: Weaken circular dependency handling for cross-root (bug #919174).

* BuildLogger: Avoid hang with -ipc builds (bug #919072).

* soname dependency support: Fix crash with --ignore-soname-deps=n (bug #919311).

* sets: VariableSet: Flatten dependencies so that e.g. www-client/firefox
  appears in @rust-rebuild.

portage-3.0.56 (2023-12-01)
--------------

In particular, this release improves dependency resolution robustness in
a few scenarios.

Breaking changes:
* ebuild: no longer implicitly set NOCOLOR and NO_COLOR when color output
  is disabled for emerge itself.  In order to obtain color-free logs, please
  either explicitly set NO_COLOR environment variable or use e.g. ansifilter.

Features:
* sync: git: Add sync-git-verify-max-age-days option.

Bug fixes:
* resolver: Handle merge order correctly for some circular dependencies
  (e.g. app-alternatives/gzip with app-arch/pigz and sys-libs/zlib)
  (bug #690436, bug #917259).

* resolver: Adjust priorities to fix wrong merge order
  (e.g. net-misc/curl with net-libs/nghttp2) (bug #918683).

* resolver: Optimize find_smallest_cycle (bug #918682).

* emerge: Fix PROMPT_COMMAND crash on shutdown (bug #917033).

* emerge: Fix crash on some build failures (bug #917315).

* emerge: Give output referring to emerge-fetch.log for FEATURES="parallel-fetch"
  while waiting for binpkgs (bug #760893).

* ebuild: Add missing newlines in error messages.

Cleanups:
* tests: Add pytest markers: ft, unit and stress.

* tests: Add test for trust helper --pretend issue (bug #915842).

portage-3.0.55 (2023-11-06)
--------------

Bug fixes:
* Convert portageq helper to a function to avoid breaking external callers
  (bug #916287, bug #916296).

* Avoid crash with incomplete depgraph for binpkg-respect-use notice (bug #916614).

* Avoid crash with blockers in depgraph for binpkg-respect-use notice (bug #916336).

* Don't call trust helper (e.g. getuto) with --getbinpkg --pretend as we may
  lack privileges to do anything (bug #915842).

portage-3.0.54 (2023-10-25)
--------------

Zac has continued working on preparing us for the 'spawn' multiprocessing
method.

Breaking changes:
* Finally ban non-PMS helpers portageq, prepinfo, prepman, prepstrip and
  prepallstrip (bug #899898, bug #906129, bug #906156).

Features:
* sync: git: Pass --verbose to git when emerge --sync --verbose.

* sync: git: Forcefully update git remote to match sync-uri for non-volatile
  repositories (bug #905869).

* emerge: Make --binpkg-respect-use output far more concise (don't show
  packages missing from the merge list and don't show packages w/ multiple
  BUILD_IDs).

Bug fixes:
* SpawnProcess, ForkProcess: Pass stdin via fd_pipes for non-background. This
  fixes e.g. emerge --sync --ask (bug #916116).

* _emerge: Fix looking up package name for error colorization (bug #915551).

* sync: git: Handle when git is configured with 'log.showSignature'.

* StaticFileSet: Fix os.walk for utf8_mode (bug #916182).

* create_trees: Handle bytes arguments for utf8_mode (bug #916149). This broke app-portage/unsymlink-lib.

Cleanups:
* MergeProcess: Support QueryCommand with spawn start method (bug #916106)

* vardbapi.unpack_contents: Support spawn start method (bug #916112)

* vardbapi.unpack_metadata: Support spawn start method (bug #916108)

* ForkProcess: Implement fd_pipes via send_handle for spawn start method (non-fork)
  (bug #915896).

portage-3.0.53 (2023-10-20)
--------------

Standard mix of bug fixes and new features, along with Zac's continued work
on preparing us for the spawn multiprocessing method.

Features:
* GNUMAKEFLAGS: also specify "-l $(nproc)", that is, limit by load average,
  per default.

* Increase default number of maximum backtrack attempts from 10 to 20.

Bug fixes:
* bintree: Add another API member (invalid_errors) to allow eclean-pkg to suppress
  errors when cleaning invalid binpkgs (bug #900224).

* repos.conf: Fix default value of sync-rsync-verify-max-age for ::gentoo. It
  was previously '24' which allowed far too much time with a stale mirror and
  could lead to users missing important updates.

* Miscellaneous determinism/reproducibility fixes for binpkgs / environment (bug #914441).

* make.conf(5): Update MAKEOPTS guidance to reflect modern practice (bug #821529).

* For locales that have UTF-8 filesystem encoding, use unicode strings rather
  than raw bytes for file paths in calls to python modules like os and shutil
  (bug #914722).

  We recommend using a UTF-8 locale for both performance and correctness reasons.

* Eliminate unnecessary package reinstalls (bug #915494).

* Update the git remote URL of an overlay with its configured sync-uri
  when necessary (bug #905869).

portage-3.0.52 (2023-10-03)
--------------

This release has a nice speedup for backtracking caching and supports eclean-pkg
removing invalid binpkgs.

Breaking changes:
* FEATURES=pkgdir-index-trusted is now on by default. This improves performance
  with binpkgs, but does require that users run `emaint binhost --fix` if they
  manually add or remove binpkgs from their PKGDIR (bug #889300).

Features:
* Refine _slot_operator_check_reverse_dependencies caching (bug #883071).

* bintree: Add new API member (invalid_paths) to allow gentoolkit to later
  clean up invalid binpkgs (bug #900224).

* gpkg: Run PORTAGE_TRUST_HELPER before remote binary package operations (bug #913070).

* emerge: Use appropriate colors if binpkgs are used in e.g. pkg_pretend
  messages as well as elog's mod_echo module (bug #914159).

* Show backtrack information after dependency resolution.

Bug fixes:
* Prevent gpg from removing /dev/null when unlocking signing key (bug #912808).

* emerge: ensure paths are UTF-8 encoded in _needs_move() (bug #913103).

* vartree: keep build dir if postinst fails (bug #704866).

* fetch: fix fetching of layout.conf when FEATURES=force-mirror (bug #877793).

* dispatch-conf, etc-update: fix SELinux security labels on merged files.

* emerge: fix application count when listing search results for ambiguous
  packages (bug #915054).

* env-update: Write ${EPREFIX}/usr/etc/ld.so.conf with unprefixed paths on
  prefixed systems to fix the bfd linker in some obscure cases (bug #892549).

* locks: Handle multiprocessing 'spawn' method (bug #915119).

Cleanups:
* vartree: Remove unused variables and parameters

* locks: Drop obsolete EINTR wrapper

portage-3.0.51 (2023-08-20)
--------------

This release features better debug logging in particular.

Features:
* emerge: Set up logging immediately and respect --debug for log level.

* sync: git, rsync: now respects --debug for better output from gemato. This is
  especially useful for debugging hangs during the 'Refreshing keys' stage.

Bug fixes:
* sync (inc. emerge-webrsync): Handle https_proxy to help users who only have it set
  - the expectation is to have http_proxy set (bug #691434, bug #835927, bug #911629)

* sync: git: respect --quiet more for PGP verification (bug #673624).

* emerge-webrsync: Explicitly pass http_proxy or https_proxy into gemato
  via --proxy (bug #911629).

* doebuild: gate -Oline behind MAKEFLAGS check (bug #909009).

* misc/emerge-delta-webrsync: Fix PGP logic which prevented syncing for this
  rarely-used tool (bug #911335).

* make.conf(5): Mention https_proxy.

portage-3.0.50 (2023-08-09)
--------------

This release has a major build system rework to support PEP517 by migrating
to meson-python, thanks to Chewi!

Breaking changes:
* The minimum supported Python version is now >= Python 3.9.

* Portage now installed with Meson and Python sdist + wheel now prepared with
  meson-python for PEP 517 compliance.

* FEATURES=cgroup was removed since it was based on version 1 cgroups, which
  caused some issues and version 1 cgroups are obsolete. Use
  FEATURES=pid-sandbox instead.

Bug fixes:
* install-qa-check.d/05prefix: Fix prefixifying shebang for >= EAPI 7 ebuilds
  (bug #909147).

* bin/save-ebuild-env.sh: Stop using compgen and hence stop needing readline
  (bug #909148).

* _reflink_linux_file_copy: Fix -Wmaybe-uninitialized.

* env-update: Check exit code from ldconfig (bug #910376).

* emerge: Fix 'no ebuilds available' message always mentioning binpkgs
  (bug #909853).

* gpkg: Fix timestamp for binary packages (bug #909067).

* Ensure non-Python (s)bin scripts launch other Python-based Portage scripts
  using the same environment.

* Use the correct Python library path when launching scripts directly from a
  virtual environment.

* Define BROOT in pkg_* phases following PMS change.

* portage(5): Fix description of 'volatile' repos.conf setting (bug #911594).

portage-3.0.49 (2023-06-21)
--------------

Bug fixes:
* Adjust write tests for DISTDIR and PORTAGE_TMPDIR to work with automount
  directories (bug #485100, bug #890812).

* depgraph: Do not allow slotted deps to be satisfied by wrong slots
  (bug #463976, bug #592880, bug #596664, bug #631490, bug #764365, bug #793992).

  This is the notorious "Perl rebuild" bug where Perl modules would get rebuilt
  _before_ a new dev-lang/perl and therefore be broken at runtime.

* dosym: Prevent globbing of argument in dosym_canonicalize().

* emerge-webrsync: Give a nicer error message if the requested key isn't
  on the filesystem (bug #905868).

* glsa-check: appropriately handle more error cases with invalid GLSAs
  (bug #905660)

portage-3.0.48.1 (2023-06-06)
----------------

Bug fixes:
* sync: webrsync: Fix syncing with keyserver explicitly specified (bug #907816).

portage-3.0.48 (2023-06-01)
--------------

Breaking changes:
* Output deprecation warnings for portageq, prepstrip and prepallstrip
  when they are called from an ebuild (bug #906129, bug #906156).

Features:
* Optimize merge process by only writing files to disk if a package's
  contents have changed. This is particularly beneficial on CoW filesystems
  with snapshots. This is always enabled. See bug #722270.

Cleanups:
* Begin porting to pytest!

Bug fixes:
* fowners, fperms: Fix handling of relative pathnames (bug #905223).

* emerge-webrsync: Switch Portage to use gemato for when it shells out
  to emerge-webrsync for repositories configured with sync-type=webrsync
  (bug #905358).

  This unifies some of the logic between Portage and emerge-webrsync:
  both of them now use the same main path for PGP verification (i.e.
  gemato).

* emerge-webrsync: Fall back correctly to manual gpg (rather than aborting
  entirely) if gemato is not installed (bug #905868).

Cleanups:
* Convert printf-style %-formats into fstrings.

* Move the internal portageq wrapper script out of the ebuild-helpers
  directory.

* Drop unused deprecated-path script.

portage-3.0.47 (2023-04-30)
--------------

Security:
* emerge-webrsync (the standalone tool) now verifies PGP signatures, see
  bug #597800. Note that 'sync-type = webrsync' in repos.conf already
  handled PGP verification when configured to do so (and it is by default).

* dispatch-conf: Avoid race when accessing log file (bug #903973).

Features:
* install-qa-check.d: 90gcc-warnings: Add additional code quality warnings:
  - -Wrestrict
  - -Wstringop-overread
  - -Wstringop-truncation
  - -Wformat-truncation
  - -Wcast-function-type
  - -Wnull-dereference
  - -Wmain
  - -Wimplicit-int
  - -Wstring-compare
* install-qa-check.d: cython-dep: Report packages that are using Cython
  but are missing BDEPEND on it.

Bug fixes:
* econf now checks for proper end of string in "configure --help" output for
  all options starting with "--with-", "--disable-" or "--enable-", in order
  to pass them to configure. This follows a change in PMS (bug #815169).

* All _E_*DESTTREE_ variables to renamed to __E_*DESTTREE, in order to move
  them to the __* namespace which is reserved for the package manager.

* The PVR variable includes -r0 if explicitly specified (bug #875362).

portage-3.0.46 (2023-04-07)
--------------

Breaking changes:
* Drop STREEBOG{256,512} support

  Support was originally added in https://bugs.gentoo.org/597736, but
  exclusively via two modules (pygost and pygcrypt) which aren't packaged in
  Gentoo - or seemingly any other major distribution.

  We're dropping both pygost and pygcrypt compatibility: pygost has been
  removed from pypi and pygcrypt is inactive upstream.

  pygost being yanked from pypi made CI start to fail too and silently dropping
  it from CI without addressing the situation which was already suboptimal (insufficient
  testing) wasn't deemed acceptable.

* Inline most code from prepinfo in install_qa_check() (bug #899898).
  Output a deprecation warning for prepinfo and prepman when they are called
  from an ebuild.

Cleanups:
* Drop support for pygcrypt

  The codepath has been disabled since 2017 because of https://bugs.gentoo.org/615620,
  so let's finally clean it up.

  pygcrypt *prior to 2017* was used for RMD160/WHIRLPOOL/SHA3_256/SHA3_512
  if hashlib didn't provide these *and* the sha3 module didn't either.

  pygcrypt last received a release in 2017 too.

* Drop support for pyblake2, sha3

  We've only supported >= Python 3.6 for quite some time, so these codepaths are
  obsolete given hashlib will always provide support for BLAKE2 and SHA3.

  Neither pyblake2 nor sha3 are even packaged in Gentoo anymore either (the
  Python bindings).

* Drop most of the pycrypto/pycryptodome fallbacks

  >= Python 3.6 includes support for BLAKE2 and SHA3 in hashlib, so these
  aren't needed anymore.

  pycrypto fallback support continues to exist for RMD160.

* Drop support for WHIRLPOOL logic via mhash

  Drop mhash fallback logic for WHIRLPOOL as we already have:
      hashlib > pycrypto > bundled C > bundled pure Python
  in terms of priority for providers.

Features:
* Respect the NO_COLOR environment variable for disabling color.

  The new quasi-standard for disabling ANSI color is to check for the NO_COLOR
  environment variable and disable color when the variable has a nonempty value.
  See bug #898224. Portage previously used NOCOLOR. It continues to support NOCOLOR
  for a time for compatibility.

* ci: enable running Portage tests on sourcehut builds

  The build manifests and supporting files can be found in .builds/

  Current limitations compared to GitHub actions:

  - Does not test with PyPy (see bug #903709)
  - Runs all all tests on each push (unless pushed with `-o skip-ci` which skips
    all tests)
  - Runs lint and ci jobs concurrently, but each Python version within those is
    tested sequentially. This means tests will take longer to complete, unless
    the run fails partway through (~1h vs ~15-20m).

  Benefits compared to GitHub actions:

  - Can monitor test progress over SSH
  - Can investigate failed tests over SSH
  - ... not GitHub ;)

Bug fixes:
* dbapi: Handle mismatched binpkg structure during pkgmoves (bug #877271,
  bug #903917, bug #903926).

* tests: util/test_shelve: fix test failure if the backend for the shelve module
  does not create the shelve db using the literal filename.

portage-3.0.45.3 (2023-03-19)
----------------

Features:
* New portage FEATURE warn-on-large-env, to emit a warning if portage
  executes an ebuild-related child process with a large environment.

Bug fixes:
* repository: config: Handle more error cases when determining repository
  volatility (bug #900683).

portage-3.0.45.2 (2023-03-04)
----------------

Bug fixes:
* repository: config: Fix initial sync of repositories (bug #899208). Regression
  from portage-3.0.45, but the real bug is from portage-3.0.42.

portage-3.0.45.1 (2023-02-27)
----------------

Bug fixes:
* install-qa-check.d/90config-impl-decl: fix handling of non-ASCII quotes when
  extracting the function name. Detect "-Werror=implicit-function-declaration"
  as used by GCC.

portage-3.0.45 (2023-02-26)
--------------

Features:
* Support new ELF machine code: AMDGPU (bug #795825)

* ebuild: Set GNUMAKEFLAGS="--output-sync=line" to ensure build logs are written
  to synchronously when running GNU make in parallel. This option is only set if
  MAKEOPTS and GNUMAKEFLAGS are left unset by the user.

* emerge: add --onlydeps-with-ideps=<y|n> option (bug #890777)

* emerge: add --update-if-installed option. This is useful for one-shot
  emerge commands to be run across several machines to upgrade packages
  only if they're installed.

* install-qa-check.d: 60pkgconfig: add opt-in QA_PKGCONFIG_VERSION check

* install-qa-check.d: add 90config-impl-decl to detect -Wimplicit-function-declaration
  in config.log, CMakeError.log, and meson-log.txt. ebuilds can add functions to
  the QA_CONFIG_IMPL_DECL_SKIP array to skip false positives.

  The following entries are created in qa.log under the tag 'config.log-impl-decl':

  * 'line' - line number in the config log where the warning is found
  * 'func' - the function that is implicitly declared

  (bug #892651)

* emerge: Log completion of package installs.

Bug fixes:
* gpkg: Handle out-of-space errors (bug #891391).

* gpkg: GPG signed gpkg will be ignored for profiles updates.

* binpkg: Show warning if the binhost is missing metadata (outdated). (bug #884869)

* binpkg: Improve error handling for binpkg detection. (bug #893638)

* portage(5): List volatile option as a separate entry (bug #888585).

* emaint: Changed default action for emaint target sync to 'auto'.

* tests: news: significantly improved test coverage (bug #889330).

* git: also report sync errors for volatile repos. Portage would previously simply
  report success if an volatile repository failed to sync (bug #895526).

* git: correct detection of volatile repositories (bug #895526).

* ebuild(5): alphabetize QA_* vars

portage-3.0.44 (2023-01-15)
--------------

Features:
* emerge: Show time taken to calculate dependency resolution with
  emerge --verbose.

* cleanups: Use flynt on the codebase to upgrade to Python f-strings everywhere.

* process: Show diagnostic message if exec failed with E2BIG

Bug fixes:
* ebuild: the PATH variable exported to ebuilds has been changed:
  The PATH setting from /etc/profile.env is appended to portage-internal
  paths, and ROOTPATH is no longer included (bug #607696, #693308, #888543).

* emerge: Fix installation of binpkgs by path (bug #873202, bug #890291).

* Fix crash with pypy when PORTAGE_SCHEDULING_POLICY has been set (bug #876031).

portage-3.0.43 (2023-01-02)
--------------

Bug fixes:
* news: Fix matching profile paths with Display-If-Profile in some cases.

* checksum: Rewrite Whirlpool implementation as a C extension to substantially improve
  performance (bug #885909).

  This only takes effect with OpenSSL 3 and newer (unnecessary otherwise).

  Whirlpool is considered deprecated within Portage and we recommend that
  repository maintainers remove it from `metadata/layout.conf`!

* sync: git: Fix "is shallow git repository" check.

* bin: Rewrite signal handling which will now correctly rethrow SIGINT
  and not confuse shells (bug #887817).

* bin: Pass -S to file(1) to avoid seccomp sandbox issues (bug #811462, bug #889046).

  Files being installed by Portage are generally trusted but also the
  syscalls allowed by file are quite broad anyway.

  Things can go catastrophically wrong if file misses valid input,
  as we may have invalid VDB metadata.

portage-3.0.42 (2022-12-26)
--------------

Breaking changes:
* Portage changed its git sync behaviour for repositories with sync-type=git.

  Recently in Portage 3.0.39 (for sync depth) and Portage 3.0.40 (git reset/clobbering),
  Portage started doing two things:

  1. Clobbering changes to repositories with sync-type=git

  If git is pulling from a CDN, Portage may on one sync receive state X, but
  on a subsequent sync receive state X-1. This can cause an odd state
  where git wants to resolve conflicts and manual intervention is required,
  hence needing git reset.

  This situation was often worse with sync-depth=1 and would lead
  to orphaned files hence needing git clean.

  2. Defaulted to sync-depth=clone-depth=1.

  The motivation here was because of disk space growing unbounded
  otherwise, as a full disk could lead to sync failure. It also makes sense
  when considered within the school of thought / motivation listed above
  (prioritising a successful sync and then making an optimisation
  based on how we achieve that).

  Portage 3.0.42 will now only make a repository shallow if:
  1. volatile=yes and it is a new sync (i.e. it was not deep before), or
  2. volatile=no  and sync-depth is unset in repos.conf.

  --

  To allow users to opt-out of these destructive changes, we now
  have a repository setting called 'volatile'.

  * If volatile=yes, the repository is assumed to be user-modifiable
    and Portage will NOT prioritise successful sync over preserving
    repository state.

  * If volatile=no, the repository is assumed to only be modified
    by Portage, and Portage will try its best to ensure syncs continue
    to work.

  The default value of 'volatile' is determined as follows:
  - If the repository is under /var/db/repos or if it is owned by either
    'portage' or 'root', then it defaults to 'no'. That is, portage
    assumes full control over the repository, potentially performing
    destructive changes to the repository.
  - If the repository is not under /var/db/repos or owned by a different
    user than 'portage' or 'root', then it defaults to 'yes'. That is,
    portage assumes the repository is user owned and does *not* perform
    any destructive changes.

Features:
* cnf: make.conf.example.loong: add for the loong arch (bug #884135).

* sync: git: only perform destructive operations like 'git reset' to keep
  sync working and the repository in a predictable state for sync-type=git
  repositories if the repository is not marked volatile.

* sync: git: only perform shallow updates if the repository is a shallow one
  or if the repository is not marked volatile.

* sync: git: run 'git clean' in git repositories if they are marked as
  non-volatile.

Bug fixes:
* glsa: Abort if a GLSA's arch list doesn't match the expected format (bug #882797).

* install-qa-check.d: 60pkgconfig: avoid using grep -P (PCRE) unnecessarily (bug #884285).

* etc-update: Apply defences for patsub_replacement being default on in Bash 5.2
  (bug #881383).

* make.conf(5): Note the various file suffixes / file extensions used
  for binary packages.

* logging: Write logs under BROOT, not EPREFIX.

portage-3.0.41 (2022-11-04)
--------------

Features:
* vartree: On collisions which are non-fatal (e.g. orphaned files when using
  FEATURES="protect-owned"), Portage now has friendlier output
  by using ewarn rather than eerror.

* cleanups: Use pyupgrade on the codebase (up to Python 3.8) to use newer
  idioms.

Bug fixes:
* Fixed possible corruption of GPKG multi-instance binary packages on upgrade.
  Bug #877271.

portage-3.0.40 (2022-12-01)
--------------

Features:
* Optimize _slot_operator_check_reverse_dependencies by caching using
  lru_cache. In a ChromeOS use case, this patch decreases the running time from
  311s to 197s with almost no memory usage increase. See bug #883071.

* config: /etc/portage/sets.conf can now be a directory. Ditto for the Portage extension
  supporting sets.conf in ebuild repositories.

* sets: Tests added for VariableSet changes to check @golang-rebuild works as
  intended.

* cleanups: Drop long-obsolete Jython compatibility code.

* cleanups: Use designated initializer syntax in src/ (C bits).

* Add support for a distinct SYSROOT location that is not equal to / or ROOT.
  This is only expected to be used for cross-bootstrapping a new system from
  scratch using a crossdev environment under /usr/${CHOST}.

Bug fixes:
* ebuild: Handle Bash 5.2's change in behavior which enables the shopt
  'patsub_replacement' by default. This is needed to avoid breaking existing
  working ebuilds. Future EAPIs will need to adjust the logic
  added by this change. See bug #881383.

* sync: Clobber repositories using sync-type=git to match rsync behavior. This
  helps with issues where git-synced repositories can become confused
  if the remote is a CDN and then starts to diverge, preventing further
  syncs.

* portage: sets: Fix DeprecationWarning in sets.

* install-qa-check.d: 90gcc-warnings: Disable -Wimplicit-function-declaration being
  fatal for now. The number of failures in bug #870412 is too large for the time
  being.

* Fix definition of ESYSROOT to use SYSROOT's prefix. For a given location, we
  were basing ESYSROOT on the prefix of that location instead of the prefix used
  by the SYSROOT location. For example, if BROOT=/foo, ROOT=/bar, EPREFIX=/baz,
  EROOT=/bar/baz, and SYSROOT=/ then ESYSROOT should be /foo, not /baz.

* depgraph: Resolve atoms using the correct root. This bug may have played out
  in different ways, but one example was a rebuild in / causing the same package
  to be added to ROOT, even when it had no other reason to be. See bug #520112.

* env-update: Also generate PATH definition in systemd user environment file
  /etc/environment.d/10-gentoo-env.conf

* bintree: Properly assign filenames for remote binpkgs.

* --disable-static is only passed for libtool-enabled configure scripts in EAPI 8.
  This avoids annoying warnings when a configure script has a flag such as
  --disable-static_link that would then trigger a QA warning (bug #814380).

portage-3.0.39 (2022-11-20)
--------------

Features:
* gpkg: Call xz and zstd with -T N where N is the number of jobs from ${MAKEOPTS}
  for parallel compression (xz & zstd) and decompression (xz with newer versions).

* gpkg: Add per format compression flags for binpkgs. This adds new config
  options BINPKG_COMPRESS_FLAGS_[format] to be used for different compression
  methods. General BINPKG_COMPRESS_FLAGS will be ignored if current method had
  specified BINPKG_COMPRESS_FLAGS_[format] (bug #871573).

* sync: git: git will sync with --depth=1 unless otherwise specified in repos.conf
  (bug #824782).

* install-qa-check.d: 90gcc-warnings: Add additional code quality warnings
  which are indicative of problems with LTO in particular:
  * -Wbuiltin-declaration-mismatch
  * -Wlto-type-mismatch (LTO esp.)
  * -Wmismatched-dealloc
  * -Wodr (LTO esp.)
  * -Wreturn-type
  * -Wstringop-overflow (GCC, FORTIFY_SOURCE)
  * -Wfortify-source (Clang, FORTIFY_SOURCE)
  * -Wstrlcpy-strlcat-size
  * -Wstrncat-size
  * -Wsuspicious-bzero
  * -Wvarargs
  * -Wargument-undefined-behaviour (Clang)
  * -Wincompatible-function-pointer-types (Clang, becomes fatal in Clang 16)
    (note we already have -Wincompatible-pointer-types in the list for GCC)
  * -Wundefined-reinterpret-cast (Clang, C++ strict aliasing)
  * -Wcast-function-type-strict (Clang, CFI)
  * Further -Wformat matches for missing specifiers.
    In future, we may warn on all -Wformat (in particular because of e.g.
    time_t & LFS).

* install-qa-check.d: 90gcc-warnings: Always die on -Wimplicit-function-declaration
  and remove bin/check-implicit-pointer-usage.py of dubious licencing (it was
  broken since GCC 4.5 because of output changes anyway, bug #365655).

  -Wimplicit-function-declaration becomes an error in Clang 16 onwards and
  GCC is likely to do the same from 14 onwards. See bug #870412.

* ecompress, etc: Support additional compression suffixes for texinfo:
  .Z, .bz2, .lzma, .lz, .xz, .zst (bug #757525).

Bug fixes:
* binpkg: Deprecate BINPKG_FORMAT in the binpkg manifest ('Packages') because
  it can become out-of-sync with reality and shouldn't be relied upon anyway
  (bug #877419).

* binpkg: Add various asserts / integrity checks to detect structure mismatches
  and detect problems earlier (bug #877357, bug #877271, bug #877419).

* binpkg: gpkg: Try to correct mismatched structures (old/new gpkg structure)
  (bug #877271).

* binpkg: gpkg: Handle package renames ('updates') where the same category was
  used but with a new package name (bug #877357).

* binpkg: gpkg: Don't silence compressor stderr to ease debugging (bug #877215).

* Manifest: Fix Manifest.addFile() calls and add tests (bug #875860).

* ecompress, etc: Pass --quiet to xz to reduce noise from "reducing threads"
  messages.

* ecompress, etc: Pass --memlimit-compress=50% to xz to avoid breakage
  on 32-bit systems with large -Tn. Required for < xz-5.3.3_alpha and
  has an equivalent effect to the limiting that comes with newer xz versions.
  We don't need it for decompression as it's there by default in newer xz
  and it's a no-op in older xz.

* emerge(1), make.conf(5), xpak(5): document BINPKG_FORMAT and the gpkg binary
  packate format further.

* sync: git: Fix sync printing local repo path (bug #875812)

portage-3.0.38.1 (2022-10-04)
----------------

Bug fixes:
* ecompress: Fix typo in ___makeopts_jobs (bug #874597).

portage-3.0.38 (2022-10-01)
--------------

Features:
* unpack now calls xz(1) with -T N where N is the number of jobs from ${MAKEOPTS}.
  This allows decompression in parallel with new enough xz (>= xz-utils 5.3.3 alpha)
  and where the source file was compressed using the parallel xz compressor
  (which becomes the default with newer xz too).

* portage: sets: Parse INCLUDES/EXCLUDES in VariableSet which allows properly
  checking for dependencies. Update @golang-rebuild accordingly which now
  includes all packages depending on dev-lang/go (bug #827974, bug #865115)

* cnf: Provide a @rust-rebuild set, similar to @golang-rebuild.

* bin: ecompress: xz, zstd: Pass -T N where N is the number of jobs from ${MAKEOPTS}
  to xz, zstd for parallel compression.

* bin: ecompress: xz: Pass -9 to xz for compression level like we do for bzip2 & gzip.

Bug fixes:
* emerge: Scheduler: Fix filenames for binpkgs in some cases - reuse existing
  filename and don't allocate a new one (bug #872392).

* dbapi: bintree: Avoid fetching 'Packages' multiple times (bug #864259).

* binpkg: Handle failure of various BINPKG_COMPRESS_* commands (bug #871570).

* data: Fix PORTAGE_USERNAME default (bug #873088).

* bin: isolated-functions.sh: return number of CPUs in ___makeopts_jobs as default
  instead of 1 to match Portage's behavior on the Python side.

* bin: ecompress: Recognize .lz, .lzo, .lz4, and .zst as compressed file
  suffixes for the purposes of the internal compressed file collision check.

* bin: ecompress: zstd: Set '-q --rm' in PORTAGE_COMPRESS_FLAGS to behave
  like other compressors.

* portage: _global_updates: Fix update summary output.

portage-3.0.37 (2022-09-23)
--------------

Bug fixes:
* _emerge: SpawnProcess: Avoid sandbox violations with PROPERTIES="interactive"
  when accessing /dev/tty* (bug #870310).

* _emerge: Binpkg: Don't create empty stray binpkgs (bug #870283).

* bin: gpkg-sign: Check gpg configuration before using (bug #869470).

* portage: gpkg: Allow missing files (needed for when ebuilds touch
  ${EROOT} in pkg_*) when creating binpkgs with quickpkg (bug #870229).

* portage: getbinpkg: Fix --getbinpkgonly command list with e.g. rsync (bug #866197).

* portage: checksum: Fix PORTAGE_CHECKSUM_FILTER. Regression from 3.0.31.

portage-3.0.36 (2022-09-09)
--------------

Bug fixes:
* The layout of gpkg (new binpkg format) packages has been fixed (bug #865905).

* Fix getbinpkg fetching (bug #864160).

portage-3.0.35 (2022-08-23)
--------------

Features:
* Portage can now set scheduling policies using the PORTAGE_SCHEDULING_POLICY
  and PORTAGE_SCHEDULING_PRIORITY variables. See make.conf.example for details.

  See also https://wiki.gentoo.org/wiki/Portage_niceness.

* The header of build.log now contains the package's slot (bug #864382).

Bug fixes:
* xml: Fix XML node parsing (resulted in duplicate USE flag descriptions
  in gentoolkit, bug 858791). This code is thought to have only one
  consumer (gentoolkit, and only as of its most recent releases), so
  impact is not severe.

* portage: dbapi: porttree: fix _set_porttrees() to operate correctly if passed
  a generator. Fixes e.g. blank emerge --metadata caches in /var/cache/edb
  which affected eix (bug #865635). Regression from 3.0.31.

* logging: don't clutter with a global logger and instead scope to
  each module. Allows further logging refactoring in future.

* estrip: fix double slash for older EAPIs (bug #862600).

* estrip: avoid spurious NEEDED warning when no ELF files installed for
  < EAPI 7 (bug #749624, bug #862606).

* estrip: apply scanelf optimisation for EAPI 7+ too (bug #749624, bug #862606).

* dispatch-conf: respect (E)ROOT

* install-qa-check.d: 60pkgconfig: drop noisy pkg-config mismatched Version
  field check (bug 857654).

* install-qa-check.d: 60pkgconfig: fix --validate check by adding
  ${ED}/usr/{lib*,share} to search path.

* install-qa-check.d: 60pkgconfig: only check defined variables for
  ${EPREFIX} compliance (bug 860825).

* install-qa-check.d: 60pkgconfig: display the detected version from
  the .pc file (improves the QA warning output), and hint to the user/developer
  about the existence of QA_PKGCONFIG_VERSION to silence the warning.

* install-qa-check.d: 60pkgconfig: use eqatag for nicer output.

* install-qa-check.d: 60pkgconfig: use ver_test where possible in version
  comparison checks to avoid warning if the Version field in the .pc file
  is equivalent to the ebuild version.

* install-qa-check.d: 80libraries: include Darwin/Mach-O objects in checks.

* install-qa-check.d: 80multilib-strict: use file/find from Prefix instead
  of absolute paths in /usr/bin.

* install-qa-checks.d: 90gcc-warnings: add arm64, aarch64 (used by Apple),
  loongarch64, riscv64, s390x to list of 64-bit arches which affects the
  severity of some warnings (like pointer truncation).

* install-qa-check.d: 90world-writable: include EPREFIX in paths.

* portage: output: update obsolete /etc/init.d/functions.sh path.

* bin: style tweaks to conform to Gentoo style (mostly variable bracing).

* doins: fix D check, add EPREFIX check

* misc-functions.sh: add Prefix fixups, like including EPREFIX in
  INSTALL_MASK for /usr/share for noman, noinfo, nodoc.

* phase-function.sh: mark ED, EROOT read-only variables

* eapi.sh: cleanup obsolete references to unofficial 5-hdepend EAPI.

* isolated-functions.sh: sync __makeopts_jobs implementation with
  multiprocessing.eclass.

* ebuild(1): improve descriptions of various phase functions.

* emerge(1): mention --with-bdeps=n behavior for both --usepkg (-k) and
  --usepkgonly (-K) (bug #863422).

* ecompress: add option to lz4 in order to be able to compress multiple
  files at once (bug #672916).

portage-3.0.34 (2022-07-20)
--------------

Bug fixes:
* checksum: fix trying to use discard on a frozenset().

* ebuild(5): mention doexe behavior is undefined if exeinto not yet called.

* ebuild(5): fix typos.

portage-3.0.33 (2022-07-18)
--------------

Bug fixes:
* env-update: Handle BROOT vs ROOT distinction for PATH (and other
  variables like PREROOTPATH and ROOTPATH). The issue being that
  only some variables are relevant for execution (and hence need
  to be derived from BROOT), while others need to correspond to
  EROOT for e.g. library paths. This should help with Clang
  stage building.

* Build: Fix test suite file data processing (copying of .gnupg data
  for the gpkg tests led to a failure in src_test in the portage ebuild).

* emerge: drop obsolete fixpackages warning (as a result of refactoring,
  started to show on every emerge, but is harmless and left over
  from many years ago). Bug #858407.

* quickpkg: Fix quoting/splitting of BINPKG_COMPRESS_FLAGS arguments. Bug #857933.

* estrip: fix double prefix (regression from "don't call estrip twice" fix
  in 3.0.31). Bug #858818.

* ebuild(5): dolib, libopts: mention dolib, libopts being banned in EAPI 7.

* ebuild(5): dohtml: mention dohtml is banned in EAPI 7.

* ebuild(5): hasv: mention hasv is banned in EAPI 8.

* ebuild(5): dosym: mention dosym -r for EAPI 8.

* ebuild(5): einstall: mention einstall was banned in EAPI 6.

* ebuild(5): econf: add --docdir and --htmldir for EAPI 6,
  add --with-sysroot for EAPI 7, add --datarootdir and --disable-static for EAPI
  8.

* ebuild(5): econf: drop --disable-dependency-tracking from "example"
  because it's confusing (implies it was always added, even before EAPI 4).

* ebuild(5): modernize examples slightly.

portage-3.0.32 (2022-07-11)
--------------

Bug fixes:
* Fix marking all news items as relevant. See bug #857669.

* Allow nested ebegin again while there's a lack of consensus on banning it.

* Fix use of deprecated (now removed) getchildren() call in XML parser,
  which caused failures with gentoolkit. See bug #857537. (Note that this
  was not originally in the release notes for 3.0.32, but the fix was in
  3.0.32).

* Fix doc generation by removing reference to removed EAPIs. See bug #857486.

portage-3.0.31 (2022-07-10)
--------------

Breaking changes:
* repoman support dropped. Please migrate to pkgcheck. See bug 835013.

* Remove support for never-official EAPIs: "4-python", "5-progress".
  Further cleanups as a result allowed removal of "USE alias" support too.

* Drop support for Python 3.6. It's been EOL upstream since 2021-12-23.
  The minimum version of Python for Portage is now Python 3.7.

Features:
* GLEP 78 "gpkg" binary package format support, including the ability to sign
  binpkgs! See bug 500630, bug 659864, bug 672672, bug 773259, bug 820578.

  This is still somewhat experimental!

  To try it out:
  - set BINPKG_FORMAT="gpkg" in make.conf;

  - optionally, set FEATURES="binpkg-signing binpkg-request-signature", and so on.
    See cnf/make.conf.example for the full details, options, and documentation.

* emerge: Add -X short option for --exclude.

* emerge: Support the "foot" terminal for title updates.

* Recognize LoongArch ABIs in multilib_category.

* depclean: Return failure via exit code if requested packages
  aren't depcleaned. See bug 851750.

* estrip: Optimize calls (avoid duplicate call) by using previously
  collected scanelf data. See bug 749624

* autoclean: Optimize unmerges by only enabling autoclean for global
  updates and/or depcleans. This avoids needing to iterate over all
  installed packages after each individual removal.

* vartree: Optimize by skipping `env-update` call (which is expensive, as
  it ends up calling `ldconfig` to regenerate ld.so.cache) if no files
  were installed (e.g. virtual/).

* vartree: Optimize by avoiding VDB lock contention (avoid taking
  lock if no blockers).

* QA: warn if 'eend' is called without a corresponding 'ebegin',
  and vice-versa: if 'ebegin' is called without a corresponding 'eend'.
  See bug 835824 and bug 835823.

* QA: install-qa-check.d: Add 60pkgconfig check which:
  - checks libdir in installed .pc files
  - checks paths not respecting EPREFIX in .pc files
  - runs pkg-config --validate on .pc files
  - checks for mismatched version in .pc files vs ${PV}. Ebuilds can override
    this using QA_PKGCONFIG_VERSION.

* QA: install-qa-check.d: Update 20runtime-directories to warn on /var/tmp
  usage too.

* emerge: Deduplicate atoms in 'dropped' message for --keep-going.

* dispatch-conf: Warn about changing the 'use-rcs' setting. See bug 837533.

* Lots of general refactoring and code cleanups.

Bug fixes:
* Disable SONAME dependencies by default again (i.e. set --ignore-soname-deps=y
  to default on). See bug 687956 and bug 829623.

  This was done because of problems caused with depcleans.

* git: Mark repository as safe for newer versions of git (>= git-2.35.2).
  See bug 838223 and bug 838271.

* dosym: Fix EAPI check for '-r' (relative) flag. It would previously allow
  using an EAPI 8 only feature.

* ebuild: Fix re-sourcing IDEPEND (EAPI 8+).

* estrip: Fix race when creating build-id debug symlinks. See bug 831927.

* MergeProcess: Fix bug causing unnecessary ld.so.cache regeneration even
  when no libraries were installed. This used to work in the past, so is viewed
  as a bug fix, rather than an optimization, although it's a bit of both.
  See bug 836375.

* MiscFunctionsProcess: Avoid clobbering the main sandbox.log if a "die hook"
  is invoked. This should prevent sandbox.log being blank in many cases.

* Drop /run warning as it ended up being too noisy and we've decided
  to workaround/fix (depending on your perspective) the issues in packages
  themselves, given only one package was actually at fault here: bug 832853.

* movefile: Merge symlinks atomically. This should reduce the risk of build
  failures during parallel builds (multiple emerge jobs). See bug 836400.

* Improve error message when Bash version is too old for an ebuild
  to be read.

* Minor improvements to 'die' output.

* Undo dep_zapdeps change in 3.0.29 as it introduced a regression w.r.t solving
  blockers for gentoo-kernel. See bug 833014.

* QA: install-qa-check.d: update 95empty-dirs to mention Portage behavior
  change for EAPI 8+.

* QA: install-qa-check.d: Fix usage of obsolete 'egrep' and 'fgrep' which
  now emit warnings with an upcoming grep release (> 3.7).

* portageq: Ditto re egrep/fgrep.

* util: Fix Whirlpool implementation breaking (crashing/failing tests) with
  OpenSSL 3. This wasn't noticed before as previously, OpenSSL exposed its
  Whirlpool implementation by default, whereas it's now marked as legacy.
  See bug 846389.

* socks5-server: Fix Python 3.10 DeprecationWarning. See bug 794115.

* portage.eapi: Include workaround for consumers with misconfigured
  logger to avoid needing a newer gentoolkit. See bug 838406.

* CI: Run 'black' on remaining files missed in the previous conversion and fix
  CI to catch regressions related to this.

* CI: Test with Python 3.11.

* CI: Drop references to unsupported Python 3.6.

* make.conf: document MAKEOPTS defaulting to the number of processors for
  the number of jobs in make.conf(5).

* dispatch-conf: fix description of 'frozen-files' format in dispatch-conf.conf
  man page. See bug 830618.

portage-3.0.30
--------------
* fix warning/crash on bad PROVIDES in package. See bug 828966.
* avoid infinite loop in _optimized_copyfile. See bug 828844.

portage-3.0.29
--------------
* check for inconsistent/missing PROVIDES during package (and binpkg)
  installation. See bug 811462.
* avoid pulling in newer slots for upgrades in some cases. See bug 828136.
* enable SONAME dependencies for binpkgs by default. See bug 687956.
* add new options to allow avoiding building/using binpkgs for live ebuilds:
  FEATURES="binpkg-live" and --usepkg-exclude-live.
* add emphasis in output to user patches being applied.

portage-3.0.27
--------------
* improve blocker output to make it clear which blockers
  are not satisfied.
* use distinct colors for einfo/elog and ewarn/eqawarn.

portage-3.0.26
--------------
* fix broken FILESDIR copying logic.

portage-3.0.25 (yanked)
-----------------------
* fix Python < 3.8 compatibility of FILESDIR copying code.

portage-3.0.24
--------------
* remove doebuild(dbkey=...) support that was deprecated since 2013.
* pass metadata internally using key=value format.
* include INHERIT key md5-cache to match pkgcore.
* reformat Portage code using black.
* fix Python 3.10 deprecation warnings.
* replace compat_coroutine use with modern async.

portage-3.0.23
--------------
* enable autogroup scheduling with pid-sandbox if possible. This should
  make the kernel respect niceness better.
* add support conf-update.d hooks.
* display all preserved libraries with --verbose.
* restore QA warnings when EXPORT_FUNCTIONS is called before inherit.
* catch more setuptools warnings via the respective QA check.

portage-3.0.22
--------------
* USE flags are now sorted with respect to numerical segments in emerge
  output (e.g. python3_10 comes after python3_9).
* setuptools version normalization warnings are now ignored.
* FEATURES=installsources no longer copies irrelevant directory trees
  with gcc-11.
* sdist archives built using "build" now include setup.py.

portage-3.0.21
--------------
* EAPI 8 fixups.

portage-3.0.20
--------------
* Finalize EAPI 8.

portage-3.0.19
--------------
* Enable EAPI 8.

portage-3.0.18
--------------
* profile-repo-deps is supported in layout.conf profile-formats.

portage-3.0.16
--------------
* emirrordist supports the content-hash distfiles mirror layout.

portage-3.0.15
--------------
* FEATURES=binpkg-multi-instance is now enabled by default.

portage-3.0.13
--------------
* FETCHCOMMAND now supports a \${DIGESTS} placeholder which expands
  to a space separated list of digests. Refer to the FETCHCOMMAND
  documentation in the make.conf(5) man page.

portage-3.0.6
--------------
* emerge --search now detects regular expressions automatically. This
  behavior is controlled by the --regex-search-auto option.
* make.conf now treats variable names that begin with two underscores
  as local variables which are not displayed by emerge --info --verbose.
* egencache --update-pkg-desc now has a --verbose option which causes
  it to emulate esync --verbose output.
* env-update now generates a systemd user-session environment in a file
  named /etc/environment.d/10-gentoo-env.conf.
* binrepos.conf is a new configuration file that acts as a substitute
  for the PORTAGE_BINHOST variable, and allows each repository to have
  a separate FETCHCOMMAND which can be used to customize authentication.
  This file is documented in the portage(5) man page.

portage-3.0.0
--------------
* Dropped support for Python 2.x.

portage-2.3.101
--------------
* The new PORTAGE_LOG_FILTER_FILE_CMD make.conf(5) variable specifies a
  command that filters build log output to a log file. In order to
  filter ANSI escape codes from build logs, ansifilter(1) is a
  convenient setting for this variable.

portage-2.3.100
--------------
* New BINPKG_COMPRESS=zstd default (does not apply to installed systems
  using the old bzip2 default).

portage-2.3.97
--------------
* Support for the PORTAGE_LOG_FILTER_FILE_CMD variable has been
  temporarily removed due to bug 716636.

portage-2.3.90
--------------
* The new PORTAGE_LOG_FILTER_FILE_CMD make.conf(5) variable specifies a
  command that filters build log output to a log file. In order to
  filter ANSI escape codes from build logs, ansifilter(1) is a
  convenient setting for this variable.

portage-2.3.80
--------------
* The emerge --quickpkg-direct option enables use of installed packages
  directly as binary packages. It can be used to create minimal runtime
  container images (which need not include a package manager), or to
  enable a live image to act as a binary installer that uses packages
  installed in the live image as a source of binary packages. This
  option is especially useful in combination with --usepkgonly and
  --ignore-soname-deps=n options, allowing implicit system dependencies
  such as libc to be automatically accounted for.

portage-2.3.77
--------------
* The emerge --autounmask option is now disabled by default, except for
  portions of behavior which are controlled by the --autounmask-use and
  --autounmask-license options. For backward compatibility, previous
  behavior of --autounmask=y and --autounmask=n is entirely preserved.
  Users can get the old behavior simply by adding --autounmask to the
  make.conf EMERGE_DEFAULT_OPTS variable.

portage-2.3.72
--------------
* The glsa-check program is now provided by portage, and it has been
  removed from gentoolkit. See bug 463952.

portage-2.3.70
--------------
* The @live-rebuild package set now searches for PROPERTIES=live, see
  bug 233589. The @deprecated-live-rebuild package set provides the
  old behavior which was based on inherited eclasses.

portage-2.3.64
--------------
* New (council approved) default locations for the Gentoo repository,
  distfiles, and binary packages (does not apply to installed systems
  using the old defaults):
  /usr/portage -> /var/db/repos/gentoo
  /usr/portage/distfiles -> /var/cache/distfiles
  /usr/portage/packages -> /var/cache/binpkgs

portage-2.3.53
--------------
* Renamed PORT_LOGDIR and PORT_LOGDIR_CLEAN variables to
  PORTAGE_LOGDIR and PORTAGE_LOGDIR_CLEAN to match other existing
  similar variables
* Enable FEATURES={ipc,network,pid}-sandbox by default

portage-2.3.42
----------------
* Sync with rsync quarantines data prior to verification, using the
  rsync --link-dest option (can be disabled by setting
  "sync-allow-hardlinks = no" in repos.conf).
* Sync with git quarantines data prior to verification, see
  https://wiki.gentoo.org/wiki/Portage_Security#git-mirror_repo.
* Sync with shallow git pull is supported, by "setting sync-depth = 1"
  in repos.conf.

portage-2.3.32
----------------
* EAPI 7 support.

portage-2.3.29
----------------
* Portage API consumers can use asyncio with portage's internal event
  loop, see portage.util.futures.unix_events.DefaultEventLoopPolicy.

portage-2.3.25
----------------
* Experimental support for EAPI 7_pre1.

portage-2.3.20
----------------
* Support RESTRICT=network-sandbox in ebuilds.

portage-2.3.17
----------------
* The doins ebuild helper has been rewritten in python for performance, and
  it does in-kernel file copying on Linux.

portage-2.3.14
----------------
* Repository metadata/layout.conf supports manifest-required-hashes
  attribute (default value is SHA512).

portage-2.3.12
----------------
* better_cache implemented to use less expensive os.listdir() instead of
  os.stat() operations to scan for ebuilds. Avoids exhaustively scanning
  overlays for all ebuilds which allows Portage to not slow down significantly
  with lots of overlays enabled. (Daniel Robbins)

portage-2.3.7
-----------------
* eapply_user combines patch basenames from all matched directories into a
  list, and applies them in POSIX sorted order. This allows patches in
  more-specific directories to override patches of the same basename found
  in less-specific directories. An empty patch (or /dev/null symlink) negates
  a patch with the same basename found in a less-specific directory.
* FEATURES=multilib-strict no longer recurses into subdirectories, in order
  to avoid false-positives. The MULTILIB_STRICT_EXEMPT variable only served
  to filter false-positives that were triggered by recursion, so it will no
  longer be needed.
* New emerge --autounmask-keep-keywords and --onlydeps-with-rdeps=<y|n>
  options.
* Set compression method for binpackages via BINPKG_COMPRESS variable
* Support for environment variables for git cmd in repos.conf via sync-git-env


portage-2.3.5
-----------------
* Numerous patches updating checksums code and python module imports for them
  including new checksum methods
* New linux in kernel movefile support via a new "C" extension module


portage-2.3.3
-----------------
* Reverted commits:
    - Bug 552814 Revert "GitSync.update: respect sync-depth
                 (Shallow fetch is not a practical default at this time,
                  given performance issues introduced by `git update-index`
                  and `git prune` (see bug 599008).
                 )


portage-2.3.1
-----------------
* Support News-Item-Format 2.0
* emerge: add --fuzzy-search and --search-similarity
* Add emerge --autounmask-continue option

portage-2.3.0
-----------------
* Final release
* Includes numerous bugfixes

portage-2.3.0_rc1
-----------------
* New split release for the repoman Q/A tool
* Includes the stage2 rewite of the repoman code base


portage-2.2.26
--------------
* EAPI 6 stable portage release


portage-2.2.25
--------------
* EAPI 6 final fully implemented.


portage-2.2.22
-------------
* Stage 1 of the repoman re-write code merged in to master branch
  This is the first release of the new code base.


portage-2.2.19
-------------
* The squashdelta sync module was removed for separate installation
  and development work


portage-2.2.19
-------------
* websync module now fully renamed to webrsync
* New squashdelta sync module for downloading full or updates for a squasfs tree
  requires dev-util/squashmerge be installed
* New binpkg-multi-instance feature allows for multiple variations
    (USE settings) to be saved in the pkgdir and index.


portage-2.2.16
-------------
* New portage plug-in sync system.
    Read the news anouncement for more details of the changes in config
    settings and operation.
* New native portage postsync.d capability
* New native portage repo.postsync.d capability
* New native indexed search capability for decent search speed
* Tentative EAPI 6 patches for additional testing


portage-2.2.14
-------------
* Remaining bugs in build/install system should be fixed.


portge-2.2.14_rc1
-------------
* Many new build/installation system errors fixed.


portage-2.2.13
-------------
* New setup.py build system and distutils-r1 ebuild at EAPI 5
* PORTAGE_{BIN,PYM}_PATH variables. If you want to call internal portage tools,
    you need to query PORTAGE_BIN_PATH and PORTAGE_PYM_PATH, use them
    and re-export them.
* New @changed-deps set to update packages which need dependecy change updates.


portage-2.2.12
-------------
* New emaint module "merges"  for finding and fixing failed merges
  If a pkg fails to merge to the live filesystem correctly, that pkg may
  not work correctly if at all.  This module scans the installed pkg database
  for those failures and can re-emerge those packages.

portage-2.2.1
-------------

* Add cgroups, ipc-sandbox, and network-sandbox FEATURES.

portage-2.2
-------------

* Add extended set configuration via /etc/portage/sets.conf. See
  /usr/share/portage/config/sets/portage.conf for examples.

portage-2.1.11.20
-------------
* Add support for EAPI 5. Refer to the PMS EAPI Cheat Sheet, portage's html
  docs installed with USE=doc, or `man 5 ebuild` for more info about EAPI 5.
* Add support for FEATURES=preserve-libs which preserves libraries when the
  sonames change during upgrade or downgrade, and the @preserved-rebuild
  package set which rebuilds consumers of preserved libraries.
* Add link level dependency awareness to emerge --depclean and --prune actions
  in order to protect against uninstallation of required libraries. Refer to
  the --depclean-lib-check option in the emerge(1) man page.

portage-2.1.11
-------------

* Add support for experimental EAPI "4-slot-abi". Refer to the corresponding
  html documentation that is installed with USE=doc, and also to the emerge(1)
  man page for information about the related --ignore-built-slot-operator-deps and
  --rebuild-if-new-slot options.

portage-2.1.10
-------------

* Improve handling of repositories/overlays for cases in which the same ebuild
  is provided by multiple repositories but with different masking status, and
  support for repository constraints on atoms (atom::repo) in configuration
  files.
* Add emerge --rebuild-if-* options that trigger rebuilds of reverse
  dependencies when packages are rebuilt or updated. Related --rebuild-exclude
  and --rebuild-ignore options can be used to avoid rebuilds for specific
  packages.
* Add emerge --reinstall-atoms, --useoldpkg-atoms, and --usepkg-exclude options
  which can be used to alter selection rules for specific packages.
* Add FEATURES=parallel-install and ebuild-locks, allowing for greater
  parallelization when installing packages (by using finer-grained locks).

portage-2.1.9.27
-------------

* Add support for EAPI 4. Refer to the PMS EAPI Cheat Sheet, portage's html
  docs installed with USE=doc, or `man 5 ebuild` for more info about EAPI 4.
  Bug #273620 tracks EAPI 4 implementation in portage.

portage-2.1.9
-------------

* There is a new ipc (inter-process communication) USE flag which is enabled
  by default. This allows portage to communicate with running ebuild processes,
  for things like best_version, has_version, and die calls in nested processes.
  This flag should remain enabled unless it is found to be incompatible with a
  specific profile or environment. When enabled, it fixes bug #278895,
  bug #315615, and makes subshell die support more robust (so that repoman's
  ebuild.nesteddie check is irrelevant).

portage-2.1.8
-------------
* The top-level __init__.py for the portage python package has been split into
  many smaller python modules, making the code easier to navigate and allowing
  small parts of the portage api to be imported with less overhead.

portage-2.1.7.17
-------------
* Add support for EAPI 3. This adds support for installation prefix, including
  new EPREFIX, ED, and EROOT variables which are used by econf and einstall
  helpers. Also, EAPI 3 adds xz extension support to the unpack helper.

portage-2.1.7
-------------

* Add license visibility filtering (GLEP 23)
* Add --accept-properties option for emerge which allows you to use
  --accept-properties=-interactive in order to temporarily exclude
  interactive updates.
* Add support for Python 3.0. At least Python 2.6 is now required in order to
  support the new syntax which is used by Python 3.0.

portage-2.1.6
-------------

* Add support for a new EAPI="2" value. For more information about new EAPI
  features, refer to the "Ebuild" chapter of the html documentation that is
  installed with portage.
* Add PORTAGE_IONICE_COMMAND setting for make.conf which is called to adjust
  IO priority on portage and it's subprocesses.
* Add emerge --jobs and --load-average options which specify behavior
  for building packages in parallel or for generating metadata in parallel
  with emerge --regen.
* Add emerge --keep-going option to continue as much as possible after
  an error. When an error occurs, dependencies are recalculated for
  remaining packages and any with unsatisfied dependencies are
  automatically dropped. The --skipfirst option automatically drops
  packages in the same way, and also drops any masked packages.
* Add git and subversion support for repoman.
* It is now possible to use `emerge <file>` to reinstall the package that
  installed a particular file. Package contents entries are indexed to
  improve performance. A command such as `emerge /lib/modules` can serve
  as a decent substitute for module-rebuild.
* Namespace sanitizing: move all portage related code into portage.* namespace,
  rename portage_foo modules to portage.foo (but keep symlinks for compability)
* Add support for news items (GLEP 42)
* Add FEATURES=protect-owned which is identical to the collision-protect
  feature except that files may be overwritten if they are not explicitly
  listed in the contents of a currently installed package.

portage-2.1.5
-------------

* For extra careful dependency handling, emerge has a new --complete-graph
  option that causes it to consider the deep dependencies of all packages from
  the system and world sets. With this option enabled, emerge will bail out
  if it determines that the given operation will break any dependencies of
  the packages that have been added to the graph. Unlike the --deep option,
  the --complete-graph option does not cause any more packages to be updated
  than would have otherwise been updated with the option disabled.
* Blockers are now resolved automatically in many more cases
  than before.  When it's safe, blocked packages are uninstalled
  automatically so that users are no longer inconvenienced with the
  task. Automatically uninstalled packages are displayed in the merge
  list, marked "uninstall" and highlighted in red. With the --tree
  option enabled, it's possible to see which package(s) caused other
  ones to be automatically uninstalled.
* The dependency resolver now has a feedback mechanism that helps make atom
  selections more consistent with previous selections that have been added to
  the graph. This solves some common cases of bug #1343.

portage-2.1.4
-------------

* After the initial setup phase, the original ebuild and eclasses are no
  longer needed because the same ebuild environment is reused for the
  entire lifecycle of the package, including uninstallation.
* The emerge --search action supports searching of both installed and binary packages
  The --usepkg and --usepkgonly options control which repositories are searched.

portage-2.1.3
-------------

* Allow per-module setting of PORTAGE_ELOG_CLASSES
* Add new elog module "echo" to simply display messages when emerge exits
* Add ** as new token for package.keywords to bypass the keyword visibility layer
* USE_EXPAND variables such as LINGUAS support a * wildcard that will enable
  all of the corresponding flags that are listed in IUSE for a given package.
  USE_EXPAND wildcards such as linguas_* are supported in USE and package.use.
* The merge process preserves the modification timestamp of files that it
  installs. The unmerge process will not uninstall files that are claimed by
  another package in the same slot.
* PDEPEND is now installed as soon as possible so that it behaves more like
  RDEPEND.  This makes PDEPEND more useful for breaking the dependency cycles
  that are sometimes triggered by RDEPEND and DEPEND.
* Enable "echo" and "save_summary" elog modules by default
* Fix -* handling in package.keywords to work as intended (reset the accepted
  keywords list), also see RELEASE-NOTES.
* Make elog functionality available to python code

portage-2.1.2
-------------

* Ebuilds support default USE flags via +flag in IUSE.
* New-style virtuals are now usable for packages that depend on themselves for
  bootstrap.
* Profiles support multiple inheritance and package.use.
* CONFIG_PROTECT and CONFIG_PROTECT_MASK both support files (not just
  directories).
* Collision protection handles symlinks properly.
* Dependencies can be satisfied by installed packages that do not have matching
  ebuilds in the portage tree or overlay.
* Emerge automatically ignores blockers that are made irrelevant by an upgrade.
* Emerge supports "reverse blocker detection" which means that the blockers of
  installed packages will always be respected.
* Emerge builds a complete dependency graph in order to ensure correct merge
  order and detection of circular dependencies.
* The world and system sets allow automatic update of all installed slots.
* DEPEND atoms support SLOT dependencies of the form ${CATEGORY}/${PN}:${SLOT}.
* Development: Extend PYTHONPATH support to allow overriding the hardcoded
  /usr/lib/portage/pym for development/testing purposes
* New "finalize" hook for elog modules enabling modules to perform actions on
  shutdown (like dispatching collected messages).
* New elog modules mail_summary and save_summary that act like the mail/save
  modules except that they merge messages from multiple packages in a single
  file/mail.
* New QA loglevel and matching eqawarn function
* `ebuild foo test` now always runs src_test if available
* If DOC_SYMLINK_DIR is set portage installs symlinks to html documention there
* FEATURES="test" automatically implies USE="test".

portage-2.1.1
-------------

* Profiles support use.force, package.use.force, and package.use.mask files.

portage-2.1 (ongoing via pre releases)
------------

* FEATURES="confcache" integration; global caching to speed up configure calls,
  requires dev-util/confcache
* elog framework and accompanying modules for logging ebuild warnings, errors
  and general notices. Collects eerror/ewarn/elog/einfo messages.
* New elog function (should replace einfo in many cases)
* version syntax enhancements allowing multiple suffixes and a new 'cvs'
  version prefix for denoting "live sources" ebuilds.
* config files as directories enabling more flexible settings management.
* Addition of an register_die_hook method that allows ebuild/eclasses to
  register functions to be called for better debugging on errors.
* Addition of pre and post user hookable functions for each ebuild phase, accessible
  via portage bashrc.  Example would be pre_src_unpack .
* cache refactoring- runtime improvement from 35% -> 65%.
* Intelligently handle and display USE_EXPAND-based IUSE variables.
* FEATURES="parallel-fetch".  Download in parallel to compilation.
* Include a "changed or new" USE flag output when --verbose isn't specified.
* Support for splitting out debug information into separate files in
  /usr/lib{,32,64}.
* exec subsystem refactoring (now with less bugs!)
* Added sha256 and rmd160 hashes for digests/manifests
* Make --emptytree only apply to ${ROOT} rather than always including /.
* Allow packages to be upgraded that are only depended on via a
  "|| ( =cat/pkg-1* =cat/pkg-2* )" construct.
* Ebuild output is no longer cut off early when using PORTAGE_LOGDIR.
* Distfiles indirection- $DISTFILES access goes through a tmp dir to fail
  access to files not listed in SRC_URI.
* Emerge now uses --resume to restart itself after portage upgrade.
* Atomic file updates via the new atomic_ofstream class.
* Global updates and fixpackages performance optimizations.
* Tests show that file locking is now more reliable.
* A bash call stack is printed when an ebuild dies in ebuild.sh.
* New rsync option handling by using a generic PORTAGE_RSYNC_EXTRA_OPTS variable
* Manifest2 support that will allow digest-* files to be eliminated from the tree.