summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJoshua Kinard <kumba@gentoo.org>2017-10-09 16:42:48 -0400
committerJoshua Kinard <kumba@gentoo.org>2017-10-09 16:43:42 -0400
commita97be5e4f3ca5955da6618a2d80bf60d1e6bbff1 (patch)
treeff59fc3ca31b6fcf43329601244295d44163b487 /sys-kernel/mips-sources
parentmedia-libs/libfreehand: Add missing tests handling (diff)
downloadgentoo-a97be5e4f3ca5955da6618a2d80bf60d1e6bbff1.tar.gz
gentoo-a97be5e4f3ca5955da6618a2d80bf60d1e6bbff1.tar.bz2
gentoo-a97be5e4f3ca5955da6618a2d80bf60d1e6bbff1.zip
sys-kernel/mips-sources: version bumps and removals
Ebuilds for 4.8.17 and 4.10.17 were removed. 4.4.79 updated to 4.4.91 4.9.40 up dated to 4.9.54 4.12.4 updated to 4.12.14 Signed-off-by: Joshua Kinard <kumba@gentoo.org> Package-Manager: Portage-2.3.11, Repoman-2.3.3
Diffstat (limited to 'sys-kernel/mips-sources')
-rw-r--r--sys-kernel/mips-sources/Manifest14
-rw-r--r--sys-kernel/mips-sources/mips-sources-4.10.17.ebuild344
-rw-r--r--sys-kernel/mips-sources/mips-sources-4.12.14.ebuild (renamed from sys-kernel/mips-sources/mips-sources-4.12.4.ebuild)0
-rw-r--r--sys-kernel/mips-sources/mips-sources-4.4.91.ebuild (renamed from sys-kernel/mips-sources/mips-sources-4.4.79.ebuild)0
-rw-r--r--sys-kernel/mips-sources/mips-sources-4.8.17.ebuild348
-rw-r--r--sys-kernel/mips-sources/mips-sources-4.9.54.ebuild (renamed from sys-kernel/mips-sources/mips-sources-4.9.40.ebuild)0
6 files changed, 3 insertions, 703 deletions
diff --git a/sys-kernel/mips-sources/Manifest b/sys-kernel/mips-sources/Manifest
index 540a16ef4be..a305036a7ec 100644
--- a/sys-kernel/mips-sources/Manifest
+++ b/sys-kernel/mips-sources/Manifest
@@ -1,24 +1,16 @@
-DIST linux-4.10.tar.xz 94231404 SHA256 3c95d9f049bd085e5c346d2c77f063b8425f191460fcd3ae9fe7e94e0477dc4b SHA512 c3690125a8402df638095bd98a613fcf1a257b81de7611c84711d315cd11e2634ab4636302b3742aedf1e3ba9ce0fea53fe8c7d48e37865d8ee5db3565220d90 WHIRLPOOL 86d021bae2dbfc4ef80c22d9e886bed4fbd9476473a2851d7beaf8ed0c7f7fbc1fa0da230eb9e763eb231b7c164c17b2a73fd336ab233543f57be280d6173738
DIST linux-4.11.tar.xz 95447768 SHA256 b67ecafd0a42b3383bf4d82f0850cbff92a7e72a215a6d02f42ddbafcf42a7d6 SHA512 6610eed97ffb7207c71771198c36179b8244ace7222bebb109507720e26c5f17d918079a56d5febdd8605844d67fb2df0ebe910fa2f2f53690daf6e2a8ad09c3 WHIRLPOOL f577b7c5c209cb8dfef2f1d56d77314fbd53323743a34b900e2559ab0049b7c2d6262bda136dd3d005bc0527788106e0484e46558448a8720dac389a969e5886
DIST linux-4.12.tar.xz 99186576 SHA256 a45c3becd4d08ce411c14628a949d08e2433d8cdeca92036c7013980e93858ab SHA512 8e81b41b253e63233e92948941f44c6482acb52aa3a3fd172f03a38a86f2c35b2ad4fd407acd1bc3964673eba344fe104d3a03e3ff4bf9cd1f22bd44263bd728 WHIRLPOOL 3b97da251c2ba4ace4a27b708f2b1dcf94cb1b59aaeded6acb74bd98f0d3e33f1df83670665e4186d99a55daa84c88d539d93e20f0ff18a6d46ef326c48dd375
DIST linux-4.4.tar.xz 87295988 SHA256 401d7c8fef594999a460d10c72c5a94e9c2e1022f16795ec51746b0d165418b2 SHA512 13c8459933a8b80608e226a1398e3d1848352ace84bcfb7e6a4a33cb230bbe1ab719d4b58e067283df91ce5311be6d2d595fc8c19e2ae6ecc652499415614b3e WHIRLPOOL 02abc203d867404b9934aaa4c1e5b5dcbb0b0021e91a03f3a7e7fd224eed106821d8b4949f32a590536db150e5a88c16fcde88538777a26d0c17900f0257b1bc
-DIST linux-4.8.tar.xz 91966856 SHA256 3e9150065f193d3d94bcf46a1fe9f033c7ef7122ab71d75a7fb5a2f0c9a7e11a SHA512 a48a065f21e1c7c4de4cf8ca47b8b8d9a70f86b64e7cfa6e01be490f78895745b9c8790734b1d22182cf1f930fb87eaaa84e62ec8cc1f64ac4be9b949e7c0358 WHIRLPOOL 3888c8c07db0c069f827245d4d7306087f78f7d03e8240eb1fcd13622cd5dbe1c17cd8ed7dc11513f77f3efd5dbd84e2b48e82bdb9b9bfd2242fd62ae32812d5
DIST linux-4.9.tar.xz 93192404 SHA256 029098dcffab74875e086ae970e3828456838da6e0ba22ce3f64ef764f3d7f1a SHA512 bf67ff812cc3cb7e5059e82cc5db0d9a7c5637f7ed9a42e4730c715bf7047c81ed3a571225f92a33ef0b6d65f35595bc32d773356646df2627da55e9bc7f1f1a WHIRLPOOL 072505b29972ad120eb25a074217847c9c2813416c4903e605a0433574f5f87616dbea0b1454e4b19acc48107f11274b682958b1d773373156e99f8163e6606a
-DIST mips-sources-4.10.0-patches-v1.tar.xz 168284 SHA256 595bd856d82c68f90a748f4ab9ba3d49265b8478589b8008f3c92663a9f76ac0 SHA512 2286b895b6705fc7411e6685c1ac7fba457e69c883e6e3f9f129c1b30537bdadc394bddcf3d81670ed3846427076e7574725d92169ba7413834807e5f519bced WHIRLPOOL a275e6d43f2487fabfc2b3de071b08f8a037460a17bd8b8da10ef58ceccabc46634cde82bcd9681c4a4a687fccb9d3bdbfd2390cd11589d88b86774405adad93
DIST mips-sources-4.11.0-patches-v1.tar.xz 169588 SHA256 103888b76ec66ca075a3b3d79ad5e5a23ca5f0c14ea7162ea3b87c7a35a2a1b2 SHA512 de3a46f6279689155064c8f3232b34bc453b2ac14fe816276b45c492d1aecb56106763b76a445545521008ce32eb9d243213b1373900a6ea4579392b43b9303c WHIRLPOOL 1dd1c26f8b4cea5d67d70495784b2725f7903ca88590bf6a8cea489112a73c5d48572c0f04ea205c975106e33b21d1929586316a94a5809655f37f4dd09d20ad
DIST mips-sources-4.12.0-patches-v1.tar.xz 169476 SHA256 4f7c2ce12fae2314a8015e82369bc5fbbb8a907e32819ea8c06dbde952563e95 SHA512 8c2dc743ceee4b6d57c0039f42c71212de836102f9ae23b4dfdf815e21bf2af4cad4382cc767d0eef091467c8a9a2d06ef3cbd47486e81d3d09f63728958ab93 WHIRLPOOL b537e468fdeac0db1f8c9843347141d46d70ff2388fea5168dafe356fa8589e0c840fcf45392097ab87e666b9bf442fbf3831a74a5f6288c4424672e65842d08
DIST mips-sources-4.4.0-patches-v2.tar.xz 156396 SHA256 7aa6ab5628c9094b2aab39e47a102ad6d9c021c6bd8e9dfc6cddece8fc8baaca SHA512 4186ee382037ec32126976ba453f78fc80c627a4ebdd79d8462f12559eb06dce25f926f3c205c7c4e5032cb501942ee10c8cb3a17339352cec3cf565c669dd52 WHIRLPOOL 86aba7143b3c38f34db0a68fc889d83676f6006eab594b89c13ea5d5abfd02ef64056472ad194aafbe15a86033c171e1fd06c0c7ffd6542cec19e553d7d6a716
-DIST mips-sources-4.8.0-patches-v1.tar.xz 218452 SHA256 4322e03fe7bb383cb6a9ab0e93ae8bc06b6911c6f2441baa3341dc2df5428e1f SHA512 ff4e1ab26f085b4d64bcb8410dd0478debb2a92c24e70bb11d460bf69b5e61a17f7116913e1a71cd7e89ea15a6a5d52118cefc15e918b9155a9780069271c907 WHIRLPOOL 5445d05a5a3b7e8cb24d09cef62317a87add0bb22f65719fdae8cc35459ac89819002b6d16d72041e28ba8cde11871a8badedc027103cc5dddc0581169441cc8
DIST mips-sources-4.9.0-patches-v1.tar.xz 233620 SHA256 62064b9c02145af55968c1f2361c6bdbcd3ebfd8ce87517567877fafa89938c4 SHA512 d786705277e1837f725c7b5a239a19744a7bdf8767c0ee75613270eb9592aeaee1cd0c6f05edb67abf93597d0f5c6fc3826d76847cd6b2aaa6cb21256720d19f WHIRLPOOL d1fd287bc58f5fab14f45001905210aca852a44c7f1775dd0f64d599eed3a4837b0d30f20921ffe8b44279c74aa2a7d87d4095ccfbbeed4953597a641fa4023a
-DIST mipsgit-4.10.0-20170314.diff.xz 1816 SHA256 d6c54ad335bf547266e1c0ae13090eb9fa31109262ae1b0e81b195cff641231c SHA512 3dabcd65da143c20b553a2b79687e8cde5521b61d9bf64a8d583ada72f4835baa8dd5d1bef9ed3334466b6fb2f4397a0ee8a0fa3b642985348a61363b45ef435 WHIRLPOOL 1e1a4de11c9245ccf320486e05b89cf19ffb0fcce51a679969b0a72e974d77cd830a7810c2d56f4af9f485b661b4bc1248436fe18173cf50a46a37ebd7dd3bc8
DIST mipsgit-4.11.0-20170513.diff.xz 1560 SHA256 1ebf0a9ecdb4cb35f1931f3985142ea1d93d462ba5115ababc11af26654531fa SHA512 6adeda78012b26ebfdad577af59305756b8b090764c17e62cc988d884ab41a39e280371ccaebd9564fff4216b515b58cf4f02d529303f75e614b67e0caf84e06 WHIRLPOOL c9547fbbf1b7a18fa0a887aa85ac53a2b7b32f8192e8837594071023a12baa9550227b4f0d23318f89d978e383c35fae7b2a7bb193b48ef481504964872bc2b3
DIST mipsgit-4.12.0-20170703.diff.xz 1128 SHA256 511b5d78c42f691b96cc69a0e7347183f9c4c3296f0d3e83282b830b5f088427 SHA512 9f811b3d039cecb024c12784d06a2f0e586443a0966d2caf73d2fbbd8cfe972b3b9aaf446f2728283fd08c1cbd9546dfa6536fd667cdc38882f1b84b61bcc333 WHIRLPOOL f7cf0d8e10386b250a1c546432d942ecffda13558566dd0a48b81fb492aceab42b189e26da4dc6b4ddf1b0a9ab7faf4be6fb974b3100bf8c64c9e020d2afe885
DIST mipsgit-4.4.0-20160123.diff.xz 1908 SHA256 71ada981970c6271765fc4cb45af1899fdc32419b5493802ff3af8febd211fe3 SHA512 0086c470064dd4e5c2fefd8161b70200475659fe925e68d374ff139b506147c39163f366be689bbb92a9aaf72e8c58cdaaaff5def6718c5e87ff7e047551a1f8 WHIRLPOOL 973bc1f626566dc13be8bd315b1339ddecda2008ef829258b8d82b1220d146115960f11808970e34299a9bdffa2e08e4e730bde4cbd3d49a1850c386ac90e9e3
-DIST mipsgit-4.8.0-20161016.diff.xz 1932 SHA256 ad0ba84c2710cfc07c7a215a435d5aa89dd477172577c4d6bbecc2195208e9ec SHA512 578792e7ce7a5c25e6acccc442ada9b829cec9d113390e5aa705359d1bf6b1d67fb6ce761eac418d411fdaf3312b04c4cbaee17d0127ef69d6c1f4a1467f75cd WHIRLPOOL 9382d87f0d71754272a1fa06eff1c4d413aa4554b903e138f5001456b7817e6780d744e82fee8681310852b864fc7b2fa7143d9303f7c728f769bcbe481c2fe5
DIST mipsgit-4.9.0-20161216.diff.xz 1120 SHA256 a1176dfc87dca9313e8eacf193c549ecee469810644f781c7d3b256da6d9237d SHA512 d1d8d95661d349826e2978d2259df9e30dbd6779a6506fe769dd8e60699e8461920b290a2064a432b8c3bd95888854f4dbcc2ba40929c58f0dd165fcb7894e15 WHIRLPOOL 11a2f9ff130258077a0f59ccd516c8055f3091453ab2f556047cbfd75dfbf28dcd569b49a7b076ada98fa969752ebcd8f2424993be8c31fd8f40b40859366009
-DIST patch-4.10.17.xz 347932 SHA256 5d6b91751fb0ec2b0fd8c30ceb792f0f90ea665fe5967345aeaa64c8bfeb19ba SHA512 98700d32b4787eae26bdece45563c171b6b8af43a1a15cf5674530fa5cd1dd47fced054b740b568a4a7a1fdbe1b10cdb8126ef43dc92551e06dc4d3245b2fb56 WHIRLPOOL 1c7e2a3ac4b96672a1983ba6b5c4ab200fad173ac9e111ffe6151bcaec2e0f3cf5fc84b59606d247b4774f918014d6de8c41d21624c99af952a8c7f913f0c748
DIST patch-4.11.12.xz 298784 SHA256 707c5f18dfb795761b0b7ac6f946f03774f9f99317306fd54d8724d17d9c7729 SHA512 ee9c5ac45896d84739c679834fcd15dfc46f9e939dcefd54ba049ac47168d71f0af680153615de002a2073ba79e44a9214f74af17ed16aa97d85e6df157fc6e8 WHIRLPOOL 4967292c175128adbd8a33f25a3cd1fdc94605ae0fda2b108105e740ddff48cc7bb08c44dd669562fb33056398a8eeadf396cc682305c7ee0a34fe5adee61f90
-DIST patch-4.12.4.xz 98592 SHA256 7cabddeaba0f9bd85278254ddd6e8af883539df70ec0ed1bda18ce83f57b304a SHA512 8a6b72524050733c166524230d85f808275a65c28f06444350ebb8c64dd4cab666f8629ef1d1d2b6c25c1f36820a1fd114510af5a38509df55f9c3071543e647 WHIRLPOOL 46d6e9dd62209fd8b1a3b1dfa9d97f15598e88f4ff4ce3126252fe2e8b108061a50772a9deb752cf06d839eeca4b089a893d666f9ef3e2f576b2f1b795af6656
-DIST patch-4.4.79.xz 1274180 SHA256 2ccbfef63ccdf75c859c2ced2e15bc2ad363ce5dc1591ea61d7de0d49c26e1b6 SHA512 a69f937a3a80949db1cf16b547d162b9c83d55f79f3119e59973a94d7e7b914555833beeae5cd165ea1e9ebb6a896352b38fc9ed0675a364dbc32fa165a62026 WHIRLPOOL 8fefb7325e5e892d473e7f1dddd9fc895b739bdc49819ef7dfae421b93c07143d31c4ea8637859b91788c93b07696999d46aaed2ad96fff20bd4df2bd35c2ecb
-DIST patch-4.8.17.xz 320288 SHA256 1e4be6f6a8eab3edcd0899db382fe1a9330320c603a9ad2c32ebb1dc6f53b3db SHA512 df239d990077cdf697fd487b4b8abb97fe442ac9fac4ed2e90c626560fc15058363310cf40580fd000d4ad55198486594a608544ce9c2bcaf03704415aa45441 WHIRLPOOL 401c8ee9f41b78b355ab76f1f0ed25b53855f641e0c27c07461e82af4e322fe958f73ef3cce6d074de2a6be550c8c8615a0a53187f3f9d17c8bd8b928d3a6051
-DIST patch-4.9.40.xz 855780 SHA256 8e85a7e9de8fcc2f06f8539b743de30e2ba1f5b9e6784da0701c3ab2b896f019 SHA512 ab9c26493069f87a9d8c6c97db1a84f03a1b1221f47facc68e65d79ef75d9c7bd93c1f39eee334e4f45381b2c84ff3acb8870478c61c4d8a648984db55be5ad3 WHIRLPOOL af5c9e1eff3f3e58848c1af5177d9f5d9abdf0ca5af78518ec4173ad6459a93e417bbde52c395c69d03d217de2fd98ae96eb1966d4002beb33ea56a11f4f95c2
+DIST patch-4.12.14.xz 237356 SHA256 999f3e0d97e1b9e7a09c8c0889f020ac9e342ec2391d0458521d4b8bff1cf945 SHA512 8bef19b2a87147b4ac7c5852d6cac0281c7df7deb84460c6462c981b9213d288061c19535bd9a4da03db73f8a9fd2fb76bf9c6d42b0b6ad1f30c97d5ee0964d1 WHIRLPOOL cd7c1173430eea9a33386fdfca10e1112ee90a5420180f30c0f375d7fb3ddfa657eae93cbae1a1d2b1a1a5d442eaf402e6565028ffeff79fc78a08b6334b1873
+DIST patch-4.4.91.xz 1365724 SHA256 d96bdc4da126aa93b33614c80c9e15fa6c6a42c225cf72927fb4ba0a3929c159 SHA512 44fab88ed7aba8f663ea01449fe7ce21e6ca0e472652dc61852402cf555ba9c7b9a48fa40a27e8da9612e9bf716b1e0ae761b6233363c6666fab8c7a54590bb7 WHIRLPOOL aa555dd9cb55ceb1c69db746b9f4b35b4f422dc8280e05fe460098a1bea5305d0044814835ccd70e7118d654819fe93f08ed300a13a1ea48122ad69b591ca439
+DIST patch-4.9.54.xz 1037212 SHA256 709621455ef17e98a2f7c3c0400f7875fa45ee672a29e005c9470fabd50304a8 SHA512 8ce2dbab8b8a94ef593eb40fc07b236c7b746a0eb099509fbe23ecde213384d535ad8ff4695b9cef2c5a78ecd6590fa8ded6e36c7ee17ef8dadb649ec5c074e2 WHIRLPOOL 4d2a6101e484f2736328cd67133db3ef113cb4f0084700104829b917c18f13849928747e44646fa954bf9dcd9ac9127b1e214ad916ca9252bf18a89f8b48b590
diff --git a/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild b/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild
deleted file mode 100644
index 47dcd494584..00000000000
--- a/sys-kernel/mips-sources/mips-sources-4.10.17.ebuild
+++ /dev/null
@@ -1,344 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20170314" # Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1" # Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.9"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
- >=sys-devel/gcc-4.7.0
- >=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00)
-DO_IP27="yes" # IP27 support (SGI Origin)
-DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000)
-DO_IP30="yes" # IP30 support (SGI Octane)
-DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27="" # DO_IP27 == "no", IP27
-SV_IP28="" # DO_IP28 == "no", IP28
-SV_IP30="" # DO_IP30 == "no", IP30
-SV_IP32="" # DO_IP32 == "no", IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
- mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
- mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
- # Get args
- local m_name="${1}"
- local m_abbr="${2}"
- local m_use="${3}"
- local is_test="${4}"
-
- # Get stable version, if exists
- local stable_ver="SV_${m_abbr}"
- stable_ver="${!stable_ver}"
-
- # See if this machine needs a USE passed or skip dying
- local has_use
- [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
- # Print error && (maybe) die
- echo -e ""
- if [ "${is_test}" != "test" ]; then
- eerror "${m_name} Support has been disabled in this ebuild"
- eerror "revision. If you wish to merge ${m_name} sources, then"
- eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
- [ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
- else
- ewarn "${m_name} Support has been marked as needing testing in this"
- ewarn "ebuild revision. This usually means that any patches to support"
- ewarn "${m_name} have been forward ported and maybe even compile-tested,"
- ewarn "but not yet booted on real hardware, possibly due to a lack of access"
- ewarn "to such hardware. If you happen to boot this kernel and have no"
- ewarn "problems at all, then please inform the maintainer. Otherwise, if"
- ewarn "experience a bug, an oops/panic, or some other oddity, then please"
- ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
- fi
-
- return 0
-}
-
-err_only_one_mach_allowed() {
- echo -e ""
- eerror "A patchset for a specific machine-type has already been selected."
- eerror "No other patches for machines-types are permitted. You will need a"
- eerror "separate copy of the kernel sources for each different machine-type"
- eerror "you want to build a kernel for."
- die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
- # Symlink /usr/src/linux as appropriate
- local my_ksrc="${S##*/}"
- for x in {ip27,ip28,ip30}; do
- use ${x} && my_ksrc="${my_ksrc}.${x}"
- done
-
- if [ ! -e "${ROOT}usr/src/linux" ]; then
- rm -f "${ROOT}usr/src/linux"
- ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
- fi
-}
-
-pkg_setup() {
- local arch_is_selected="no"
- local m_ip m_enable m_name
-
- # Exclusive machine patchsets
- # These are not allowed to be mixed together, thus only one of them may be applied
- # to a tree per merge.
- for x in \
- "ip27 SGI Origin 200/2000" \
- "ip28 SGI Indigo2 Impact R10000" \
- "ip30 SGI Octane"
- do
- set -- ${x} # Set positional params
- m_ip="${1}" # Grab the first param (HW IP for SGI)
- shift # Shift the positions
- m_name="${*}" # Get the rest (Name)
-
- if use ${m_ip}; then
- # Fetch the value indiciating if the machine is enabled or not
- m_enable="DO_${m_ip/ip/IP}"
- m_enable="${!m_enable}"
-
- # Make sure only one of these exclusive machine patches is selected
- [ "${arch_is_selected}" = "no" ] \
- && arch_is_selected="yes" \
- || err_only_one_mach_allowed
-
- # Is the machine support disabled or marked as needing testing?
- [ "${m_enable}" = "test" ] \
- && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
- [ "${m_enable}" = "no" ] \
- && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
- # Show relevant information about the machine
- show_${m_ip}_info
- fi
- done
-
- # All other systems that don't have a USE flag go here
- # These systems have base-line support included in linux-mips git, so
- # instead of failing, if disabled, we simply warn the user
- if [ "${arch_is_selected}" = "no" ]; then
- [ "${DO_IP22}" = "no" ] \
- && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \
- || show_ip22_info
- [ "${DO_IP32}" = "no" ] \
- && err_disabled_mach "SGI O2" "IP32" "skip" \
- || show_ip32_info
-
- fi
-}
-
-show_ip22_info() {
- echo -e ""
- einfo "IP22 systems with an R5000 processor should work with this release."
- einfo "The R4x00 series of processors tend to be rather flaky, especially the"
- einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400."
- einfo ""
- einfo "Some Notes:"
- einfo "\t- Supported graphics card right now is Newport (XL)."
- einfo "\t- A driver for Extreme (XZ) does not exist at present."
- echo -e ""
-}
-
-show_ip27_info() {
- echo -e ""
- ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
- ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is"
- ewarn "unknown at this time. Please report any oops messages from this"
- ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
- echo -e ""
-}
-
-show_ip28_info() {
- echo -e ""
- einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However,"
- einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
- einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
- einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
- einfo "feedback that can be used to trace down the crash."
- echo -e ""
-}
-
-show_ip30_info() {
- echo -e ""
- eerror "Things that DON'T work:"
- eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
- eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
- eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
- eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
- eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
- eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
- eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
- echo -e ""
- ewarn "Things that might work, but have problems, or are unknown:"
- ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
- ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be"
- ewarn "\t\040\040selected for hugepages to work. If use of this feature continues"
- ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
- ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
- ewarn "\t\040\040after powering it down for at least 30 seconds."
- ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
- ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts,"
- ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
- ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on"
- ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to"
- ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
- ewarn "\t- UHCI Cards are known to have issues, but should still function."
- ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
- ewarn "\t\040\040adapters."
- ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
- ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
- ewarn "\t\040\040UART driver. The NIC part number is also not read correctly"
- ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be"
- ewarn "\t\040\040appreciated and patches welcome."
- ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
- ewarn "\t\040\040and are not guaranteed to work. This applies to various digital"
- ewarn "\t\040\040video conversion boards as well."
- echo -e ""
- einfo "Things that DO work:"
- einfo "\t- SMP works again, celebrate!"
- einfo "\t- Impact (MGRAS) console only."
- einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
- einfo "\t- PCI Card Cages should work for many devices, except certain types like"
- einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
- einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please"
- einfo "\t\040\040report any problems with these devices."
- echo -e ""
-}
-
-show_ip32_info() {
- echo -e ""
- einfo "IP32 systems function well, however there are some notes:"
- einfo "\t- A sound driver now exists for IP32. Celebrate!"
- einfo "\t- Framebuffer console is limited to 4MB. Anything greater"
- einfo "\t\040\040specified when building the kernel will likely oops"
- einfo "\t\040\040or panic the kernel."
- einfo "\t- X support is limited to the generic fbdev driver. No X"
- einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit"
- einfo "\t\040\040patches!"
- echo -e ""
-
- einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
- einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
- einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
- # Unpack the kernel sources, update to the latest rev (if needed),
- # and apply the latest patch from linux-mips git.
- kernel-2_src_unpack
-
- # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
- echo -e ""
- cd "${WORKDIR}"
- unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
- # Create a new folder called 'patch-symlinks' and create symlinks to
- # all mips-patches in there. If we want to exclude a patch, we'll
- # just delete the symlink instead of the actual patch.
- local psym="patch-symlinks"
- mkdir "${psym}"
- cd "${psym}"
- for x in ../mips-patches-${BASE_KV}/*.patch; do
- ln -s "${x}" "${x##../mips-patches-*/}"
- done
-
- # With symlinks created, setup the variables referencing external
- # machine patches and if a machine USE flag is enabled, then unset
- # its corresponding variable.
- # See 0000_README for the patch numbers and their meanings.
- local p_generic="51*"
- local p_ip27="52*" p_ip28="53*" p_ip30="54*"
- local p_xp="80*"
- use ip27 && unset p_generic p_ip27
- use ip28 && unset p_ip28
- use ip30 && unset p_generic p_ip30
- use experimental && unset p_xp
-
- # Remove symlinks for any patches that we don't want applied. We
- # do this by looping through all the above variables, and deleting
- # matching symlinks that point to the corresponding patches.
- # The remaining symlinks will be applied to the kernel source.
- #
- # $P_EXCLUDE is a new var that can be set in an ebuild to exclude
- # specific patches by wildcarding the patch number.
- local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
- for x in $patchlist;
- do rm -f "./${x}"
- done
-
- # Rename the source tree to match the linux-mips git checkout date and
- # machine type.
- local fkv="${F_KV%-*}"
- local v="${fkv}-${GITDATE}"
- for x in {ip27,ip28,ip30}; do
- use ${x} && v="${v}.${x}" && break
- done
- mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
- S="${WORKDIR}/linux-${v}"
-
- # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
- EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
- unpack_set_extraversion
-}
-
-src_prepare() {
- local psym="patch-symlinks"
-
- # Now go into the kernel source and patch it.
- cd "${S}"
- epatch -p1 "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.12.4.ebuild b/sys-kernel/mips-sources/mips-sources-4.12.14.ebuild
index 109a0726cf3..109a0726cf3 100644
--- a/sys-kernel/mips-sources/mips-sources-4.12.4.ebuild
+++ b/sys-kernel/mips-sources/mips-sources-4.12.14.ebuild
diff --git a/sys-kernel/mips-sources/mips-sources-4.4.79.ebuild b/sys-kernel/mips-sources/mips-sources-4.4.91.ebuild
index ee4aae1d80d..ee4aae1d80d 100644
--- a/sys-kernel/mips-sources/mips-sources-4.4.79.ebuild
+++ b/sys-kernel/mips-sources/mips-sources-4.4.91.ebuild
diff --git a/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild b/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild
deleted file mode 100644
index 724e72f9b39..00000000000
--- a/sys-kernel/mips-sources/mips-sources-4.8.17.ebuild
+++ /dev/null
@@ -1,348 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# EAPI Version
-EAPI="5"
-
-#//------------------------------------------------------------------------------
-
-# Version Data
-GITDATE="20161016" # Date of diff between kernel.org and lmo GIT
-GENPATCHREV="1" # Tarball revision for patches
-
-# Directories
-S="${WORKDIR}/linux-${OKV}-${GITDATE}"
-MIPS_PATCHES="${WORKDIR}/mips-patches"
-
-# Kernel-2 Vars
-K_SECURITY_UNSUPPORTED="yes"
-K_NOUSENAME="yes"
-K_NOSETEXTRAVERSION="yes"
-K_NOUSEPR="yes"
-K_BASE_VER="4.7"
-K_FROM_GIT="yes"
-ETYPE="sources"
-
-# Inherit Eclasses
-inherit kernel-2 eutils
-detect_version
-
-# EPATCH Vars
-# XXX: Required to properly apply Impact/Odyssey driver patches.
-EPATCH_OPTS="-F3"
-
-# Version Data
-F_KV="${PVR}"
-BASE_KV="$(get_version_component_range 1-2).0"
-[[ "${EXTRAVERSION}" = -rc* ]] && KVE="${EXTRAVERSION}"
-
-# Portage Vars
-HOMEPAGE="https://www.linux-mips.org/ https://www.gentoo.org/"
-KEYWORDS="-* ~mips"
-IUSE="experimental ip27 ip28 ip30"
-RDEPEND=""
-DEPEND="${RDEPEND}
- >=sys-devel/gcc-4.7.0
- >=sys-devel/patch-2.7.4"
-
-# Specify any patches or patch familes to NOT apply here.
-# Use only the 4-digit number followed by a '*'.
-P_EXCLUDE=""
-
-# Machine Support Control Variables
-DO_IP22="test" # If "yes", enable IP22 support (SGI Indy, Indigo2 R4x00)
-DO_IP27="yes" # IP27 support (SGI Origin)
-DO_IP28="test" # IP28 support (SGI Indigo2 Impact R10000)
-DO_IP30="yes" # IP30 support (SGI Octane)
-DO_IP32="yes" # IP32 support (SGI O2, R5000/RM5200 Only)
-
-# Machine Stable Version Variables
-SV_IP22="" # If set && DO_IP22 == "no", indicates last "good" IP22 version
-SV_IP27="" # DO_IP27 == "no", IP27
-SV_IP28="" # DO_IP28 == "no", IP28
-SV_IP30="" # DO_IP30 == "no", IP30
-SV_IP32="" # DO_IP32 == "no", IP32
-
-DESCRIPTION="Linux-Mips GIT sources for MIPS-based machines, dated ${GITDATE}"
-SRC_URI="${KERNEL_URI}
- mirror://gentoo/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz
- mirror://gentoo/${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
-UNIPATCH_STRICTORDER="yes"
-UNIPATCH_LIST="${DISTDIR}/mipsgit-${BASE_KV}${KVE}-${GITDATE}.diff.xz"
-
-#//------------------------------------------------------------------------------
-
-err_disabled_mach() {
- # Get args
- local m_name="${1}"
- local m_abbr="${2}"
- local m_use="${3}"
- local is_test="${4}"
-
- # Get stable version, if exists
- local stable_ver="SV_${m_abbr}"
- stable_ver="${!stable_ver}"
-
- # See if this machine needs a USE passed or skip dying
- local has_use
- [ ! -z "${m_use}" -a "${m_use}" != "skip" ] && has_use="USE=\"${m_use}\" "
-
- # Print error && (maybe) die
- echo -e ""
- if [ "${is_test}" != "test" ]; then
- eerror "${m_name} Support has been disabled in this ebuild"
- eerror "revision. If you wish to merge ${m_name} sources, then"
- eerror "run ${has_use}emerge =mips-sources-${stable_ver}"
- [ "${m_use}" != "skip" ] && die "${m_name} Support disabled."
- else
- ewarn "${m_name} Support has been marked as needing testing in this"
- ewarn "ebuild revision. This usually means that any patches to support"
- ewarn "${m_name} have been forward ported and maybe even compile-tested,"
- ewarn "but not yet booted on real hardware, possibly due to a lack of access"
- ewarn "to such hardware. If you happen to boot this kernel and have no"
- ewarn "problems at all, then please inform the maintainer. Otherwise, if"
- ewarn "experience a bug, an oops/panic, or some other oddity, then please"
- ewarn "file a bug at bugs.gentoo.org, and assign it to the mips team."
- fi
-
- return 0
-}
-
-err_only_one_mach_allowed() {
- echo -e ""
- eerror "A patchset for a specific machine-type has already been selected."
- eerror "No other patches for machines-types are permitted. You will need a"
- eerror "separate copy of the kernel sources for each different machine-type"
- eerror "you want to build a kernel for."
- die "Only one machine-type patchset allowed"
-}
-
-pkg_postinst() {
- # Symlink /usr/src/linux as appropriate
- local my_ksrc="${S##*/}"
- for x in {ip27,ip28,ip30}; do
- use ${x} && my_ksrc="${my_ksrc}.${x}"
- done
-
- if [ ! -e "${ROOT}usr/src/linux" ]; then
- rm -f "${ROOT}usr/src/linux"
- ln -sf "${my_ksrc}" "${ROOT}/usr/src/linux"
- fi
-}
-
-pkg_setup() {
- local arch_is_selected="no"
- local m_ip m_enable m_name
-
- # Exclusive machine patchsets
- # These are not allowed to be mixed together, thus only one of them may be applied
- # to a tree per merge.
- for x in \
- "ip27 SGI Origin 200/2000" \
- "ip28 SGI Indigo2 Impact R10000" \
- "ip30 SGI Octane"
- do
- set -- ${x} # Set positional params
- m_ip="${1}" # Grab the first param (HW IP for SGI)
- shift # Shift the positions
- m_name="${*}" # Get the rest (Name)
-
- if use ${m_ip}; then
- # Fetch the value indiciating if the machine is enabled or not
- m_enable="DO_${m_ip/ip/IP}"
- m_enable="${!m_enable}"
-
- # Make sure only one of these exclusive machine patches is selected
- [ "${arch_is_selected}" = "no" ] \
- && arch_is_selected="yes" \
- || err_only_one_mach_allowed
-
- # Is the machine support disabled or marked as needing testing?
- [ "${m_enable}" = "test" ] \
- && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}" "test"
- [ "${m_enable}" = "no" ] \
- && err_disabled_mach "${m_name}" "${m_ip/ip/IP}" "${m_ip}"
-
- # Show relevant information about the machine
- show_${m_ip}_info
- fi
- done
-
- # All other systems that don't have a USE flag go here
- # These systems have base-line support included in linux-mips git, so
- # instead of failing, if disabled, we simply warn the user
- if [ "${arch_is_selected}" = "no" ]; then
- [ "${DO_IP22}" = "no" ] \
- && err_disabled_mach "SGI Indy/Indigo2 R4x00" "IP22" "skip" \
- || show_ip22_info
- [ "${DO_IP32}" = "no" ] \
- && err_disabled_mach "SGI O2" "IP32" "skip" \
- || show_ip32_info
-
- fi
-}
-
-show_ip22_info() {
- echo -e ""
- einfo "IP22 systems with an R5000 processor should work with this release."
- einfo "The R4x00 series of processors tend to be rather flaky, especially the"
- einfo "R4600. If you have to run an R4x00 processor, then try to use an R4400."
- einfo ""
- einfo "Some Notes:"
- einfo "\t- Supported graphics card right now is Newport (XL)."
- einfo "\t- A driver for Extreme (XZ) does not exist at present."
- echo -e ""
-}
-
-show_ip27_info() {
- echo -e ""
- ewarn "Heavy disk I/O on recent kernels may randomly trigger a VM_BUG_ON_PAGE()"
- ewarn "in move_freepages() in mm/page_alloc.c. The exact trigger cause is"
- ewarn "unknown at this time. Please report any oops messages from this"
- ewarn "bug to bugs.gentoo.org (assign to mips@gentoo.org)"
- echo -e ""
-}
-
-show_ip28_info() {
- echo -e ""
- einfo "Support for the Indigo2 Impact R10000 is now in the mainline kernel. However,"
- einfo "due to the R10000 Speculative Execution issue that exists with this machine,"
- einfo "nothing is guaranteed to work correctly. Consider enabling ${HILITE}CONFIG_KALLSYMS${NORMAL}"
- einfo "in your kernel so that if the machine Oopes, you'll be able to provide valuable"
- einfo "feedback that can be used to trace down the crash."
- echo -e ""
-}
-
-show_ip30_info() {
- echo -e ""
- eerror "Things that DON'T work:"
- eerror "\t- Do not use CONFIG_SLUB, otherwise, you'll get errors when booting"
- eerror "\t\040\040regarding duplicate /sys/kernel/slab/* entries in sysfs."
- eerror "\t- Impact (MGRAS) Xorg driver no longer functions due to severe bitrot."
- eerror "\t- Octane is limited to a maximum of 2GB of memory right now due to a"
- eerror "\t\040\040hardware quirk in the BRIDGE PCI chip that limits BRIDGE DMA"
- eerror "\t\040\040addresses to 31-bits when converted into physical addresses."
- eerror "\t\040\040Patches that attempt to fix the issue are highly welcome."
- echo -e ""
- ewarn "Things that might work, but have problems, or are unknown:"
- ewarn "\t- CONFIG_TRANSPARENT_HUGEPAGE should work now, but there may still be"
- ewarn "\t\040\040intermittent issues. Additionally, CONFIG_HUGETLBFS must also be"
- ewarn "\t\040\040selected for hugepages to work. If use of this feature continues"
- ewarn "\t\040\040to trigger random Instruction Bus Errors (IBEs), then it is best to"
- ewarn "\t\040\040disable the functionality and perform a cold reset of the machine"
- ewarn "\t\040\040after powering it down for at least 30 seconds."
- ewarn "\t- Serial support on the Octane uses a very basic UART driver that drives"
- ewarn "\t\040\040the 16550A chip on the IOC3 directly. It does not use interrupts,"
- ewarn "\t\040\040only a polling routine on a timer, which makes it slow and CPU-"
- ewarn "\t\040\040intensive. The baud rate is limited to no more than 38.4kbps on"
- ewarn "\t\040\040this driver. Patches for getting the Altix IOC3 serial driver to"
- ewarn "\t\040\040work (which uses DMA and supports faster baud rates) are welcome."
- ewarn "\t- UHCI Cards are known to have issues, but should still function."
- ewarn "\t\040\040This issue primarily manifests itself when using pl2303 USB->Serial"
- ewarn "\t\040\040adapters."
- ewarn "\t- MENET boards appear to have the four ethernet ports detected, however"
- ewarn "\t\040\040the six serial ports don't appear to get picked up by the IOC3"
- ewarn "\t\040\040UART driver. The NIC part number is also not read correctly"
- ewarn "\t\040\040from the four Number-In-a-Cans. Additional testing would be"
- ewarn "\t\040\040appreciated and patches welcome."
- ewarn "\t- Other XIO-based devices, like various Impact addons, remain untested"
- ewarn "\t\040\040and are not guaranteed to work. This applies to various digital"
- ewarn "\t\040\040video conversion boards as well."
- echo -e ""
- einfo "Things that DO work:"
- einfo "\t- SMP works again, celebrate!"
- einfo "\t- Impact (MGRAS) console only."
- einfo "\t- VPro (Odyssey) console only (no X driver exists yet)."
- einfo "\t- PCI Card Cages should work for many devices, except certain types like"
- einfo "\t\040\040PCI-to-PCI bridges (USB hubs, USB flash card readers for example)."
- einfo "\t- SCSI, RTC, basic PCI, IOC3 Ethernet, keyboard, and mouse. Please"
- einfo "\t\040\040report any problems with these devices."
- echo -e ""
-}
-
-show_ip32_info() {
- echo -e ""
- einfo "IP32 systems function well, however there are some notes:"
- einfo "\t- A sound driver now exists for IP32. Celebrate!"
- einfo "\t- Framebuffer console is limited to 4MB. Anything greater"
- einfo "\t\040\040specified when building the kernel will likely oops"
- einfo "\t\040\040or panic the kernel."
- einfo "\t- X support is limited to the generic fbdev driver. No X"
- einfo "\t\040\040gbefb driver exists for O2 yet. Feel free to submit"
- einfo "\t\040\040patches!"
- echo -e ""
-
- einfo "To Build 64bit kernels for SGI O2 (IP32) or SGI Indy/Indigo2 R4x00 (IP22)"
- einfo "systems, you need to use the ${GOOD}vmlinux.32${NORMAL} make target."
- einfo "Once done, boot the ${GOOD}vmlinux.32${NORMAL} file (NOT vmlinux)."
-}
-
-src_unpack() {
- # Unpack the kernel sources, update to the latest rev (if needed),
- # and apply the latest patch from linux-mips git.
- kernel-2_src_unpack
-
- # Unpack the mips-sources patchset to ${WORKDIR}/mips-patches-${BASE_KV}.
- echo -e ""
- cd "${WORKDIR}"
- unpack "${PN}-${BASE_KV}-patches-v${GENPATCHREV}.tar.xz"
-
- # Create a new folder called 'patch-symlinks' and create symlinks to
- # all mips-patches in there. If we want to exclude a patch, we'll
- # just delete the symlink instead of the actual patch.
- local psym="patch-symlinks"
- mkdir "${psym}"
- cd "${psym}"
- for x in ../mips-patches-${BASE_KV}/*.patch; do
- ln -s "${x}" "${x##../mips-patches-*/}"
- done
-
- # With symlinks created, setup the variables referencing external
- # machine patches and if a machine USE flag is enabled, then unset
- # its corresponding variable.
- # See 0000_README for the patch numbers and their meanings.
- local p_generic="51*"
- local p_ip27="52*" p_ip28="53*" p_ip30="54*"
- local p_xp="80*"
- use ip27 && unset p_generic p_ip27
- use ip28 && unset p_ip28
- use ip30 && unset p_generic p_ip30
- use experimental && unset p_xp
-
- # Remove symlinks for any patches that we don't want applied. We
- # do this by looping through all the above variables, and deleting
- # matching symlinks that point to the corresponding patches.
- # The remaining symlinks will be applied to the kernel source.
- #
- # $P_EXCLUDE is a new var that can be set in an ebuild to exclude
- # specific patches by wildcarding the patch number.
- local patchlist="${p_generic} ${p_ip27} ${p_ip28} ${p_ip30} ${p_xp} ${P_EXCLUDE}"
- for x in $patchlist;
- do rm -f "./${x}"
- done
-
- # Rename the source tree to match the linux-mips git checkout date and
- # machine type.
- local fkv="${F_KV%-*}"
- local v="${fkv}-${GITDATE}"
- for x in {ip27,ip28,ip30}; do
- use ${x} && v="${v}.${x}" && break
- done
- mv "${WORKDIR}/linux-${fkv/_/-}" "${WORKDIR}/linux-${v}" || die
- S="${WORKDIR}/linux-${v}"
-
- # Set the EXTRAVERSION to linux-VERSION-mipsgit-GITDATE
- EXTRAVERSION="${EXTRAVERSION}-mipsgit-${GITDATE}"
- unpack_set_extraversion
-}
-
-src_prepare() {
- local psym="patch-symlinks"
-
- # Now go into the kernel source and patch it.
- cd "${S}"
- epatch "${WORKDIR}/${psym}"/*.patch
-}
-
-#//------------------------------------------------------------------------------
diff --git a/sys-kernel/mips-sources/mips-sources-4.9.40.ebuild b/sys-kernel/mips-sources/mips-sources-4.9.54.ebuild
index 36671f256fb..36671f256fb 100644
--- a/sys-kernel/mips-sources/mips-sources-4.9.40.ebuild
+++ b/sys-kernel/mips-sources/mips-sources-4.9.54.ebuild