summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'app-backup/amanda/amanda-3.5.1.ebuild')
-rw-r--r--app-backup/amanda/amanda-3.5.1.ebuild498
1 files changed, 498 insertions, 0 deletions
diff --git a/app-backup/amanda/amanda-3.5.1.ebuild b/app-backup/amanda/amanda-3.5.1.ebuild
new file mode 100644
index 00000000000..058d9b9ccb9
--- /dev/null
+++ b/app-backup/amanda/amanda-3.5.1.ebuild
@@ -0,0 +1,498 @@
+# Copyright 1999-2017 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=6
+inherit autotools perl-module user systemd
+
+DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
+HOMEPAGE="http://www.amanda.org/"
+SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz"
+
+LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+"
+SLOT="0"
+IUSE="curl gnuplot ipv6 kerberos minimal ndmp nls readline s3 samba systemd xfs"
+
+KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
+RDEPEND="sys-libs/readline:=
+ virtual/awk
+ app-arch/tar
+ dev-lang/perl:=
+ app-arch/dump
+ net-misc/openssh
+ >=dev-libs/glib-2.26.0
+ dev-perl/JSON
+ dev-perl/Encode-Locale
+ nls? ( virtual/libintl )
+ s3? ( >=net-misc/curl-7.10.0 )
+ !s3? ( curl? ( >=net-misc/curl-7.10.0 ) )
+ samba? ( net-fs/samba:= )
+ kerberos? ( app-crypt/mit-krb5 )
+ xfs? ( sys-fs/xfsdump )
+ !minimal? (
+ dev-perl/XML-Simple
+ virtual/mailx
+ app-arch/mt-st:=
+ sys-block/mtx
+ gnuplot? ( sci-visualization/gnuplot )
+ app-crypt/aespipe
+ app-crypt/gnupg
+ )"
+
+DEPEND="${RDEPEND}
+ virtual/pkgconfig
+ nls? ( sys-devel/gettext )
+ >=app-text/docbook-xsl-stylesheets-1.72.0
+ app-text/docbook-xml-dtd
+ dev-libs/libxslt
+ dev-lang/swig
+ "
+
+MYFILESDIR="${T}/files"
+ENVDIR="/etc/env.d"
+ENVDFILE="97amanda"
+TMPENVFILE="${T}/${ENVDFILE}"
+
+# This is a complete list of Amanda settings that the ebuild takes from the
+# build environment. This allows users to alter the behavior of the package as
+# upstream intended, but keeping with Gentoo style. We store a copy of them in
+# /etc/env.d/97amanda during the install, so that they are preserved for future
+# installed. This variable name must not start with AMANDA_, as we do not want
+# it captured into the env file.
+ENV_SETTINGS_AMANDA="
+AMANDA_GROUP_GID AMANDA_GROUP_NAME
+AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
+AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_TAPE_DEVICE AMANDA_SERVER_INDEX
+AMANDA_TAR_LISTDIR AMANDA_TAR
+AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
+AMANDA_CONFIG_NAME AMANDA_TMPDIR"
+
+amanda_variable_setup() {
+
+ # Setting vars
+ local currentamanda
+
+ # Grab the current settings
+ currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
+
+ # First we set the defaults
+ [[ -z "${AMANDA_GROUP_GID}" ]] && AMANDA_GROUP_GID=87
+ [[ -z "${AMANDA_GROUP_NAME}" ]] && AMANDA_GROUP_NAME=amanda
+ [[ -z "${AMANDA_USER_NAME}" ]] && AMANDA_USER_NAME=amanda
+ [[ -z "${AMANDA_USER_UID}" ]] && AMANDA_USER_UID=87
+ [[ -z "${AMANDA_USER_SH}" ]] && AMANDA_USER_SH=/bin/bash
+ [[ -z "${AMANDA_USER_HOMEDIR}" ]] && AMANDA_USER_HOMEDIR=/var/spool/amanda
+ [[ -z "${AMANDA_USER_GROUPS}" ]] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
+
+ # This installs Amanda, with the server. However, it could be a client,
+ # just specify an alternate server name in AMANDA_SERVER.
+ [[ -z "${AMANDA_SERVER}" ]] && AMANDA_SERVER="${HOSTNAME}"
+ [[ -z "${AMANDA_SERVER_TAPE}" ]] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
+ [[ -z "${AMANDA_SERVER_TAPE_DEVICE}" ]] && AMANDA_SERVER_TAPE_DEVICE="/dev/nst0"
+ [[ -z "${AMANDA_SERVER_INDEX}" ]] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
+ [[ -z "${AMANDA_TAR_LISTDIR}" ]] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
+ [[ -z "${AMANDA_CONFIG_NAME}" ]] && AMANDA_CONFIG_NAME=DailySet1
+ [[ -z "${AMANDA_TMPDIR}" ]] && AMANDA_TMPDIR=/var/tmp/amanda
+ [[ -z "${AMANDA_DBGDIR}" ]] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
+ # These are left empty by default
+ [[ -z "${AMANDA_PORTS_UDP}" ]] && AMANDA_PORTS_UDP=
+ [[ -z "${AMANDA_PORTS_TCP}" ]] && AMANDA_PORTS_TCP=
+ [[ -z "${AMANDA_PORTS_BOTH}" ]] && AMANDA_PORTS_BOTH=
+ [[ -z "${AMANDA_PORTS}" ]] && AMANDA_PORTS=
+
+ # What tar to use
+ [[ -z "${AMANDA_TAR}" ]] && AMANDA_TAR=/bin/tar
+
+ # Now pull in the old stuff
+ if [[ -f "${EROOT}${ENVDIR}/${ENVDFILE}" ]]; then
+ # We don't just source it as we don't want everything in there.
+ eval $(egrep "^AMANDA_" "${EROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS')
+ fi
+
+ # Re-apply the new settings if any
+ [ -n "${currentamanda}" ] && eval $(echo "${currentamanda}")
+
+}
+
+pkg_setup() {
+ amanda_variable_setup
+
+ # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
+ # another host than HOSTNAME.
+ if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
+ elog "You are installing a client-only version of Amanda."
+ elog "You should set the variable \$AMANDA_SERVER to point at your"
+ elog "Amanda-tape-server, otherwise you will have to specify its name"
+ elog "when using amrecover on the client."
+ elog "For example: Use something like"
+ elog "AMANDA_SERVER=\"myserver\" emerge amanda"
+ elog
+ fi
+
+ enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
+ enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
+}
+
+src_unpack() {
+ # we do not want the perl src_unpack
+ default_src_unpack
+}
+
+src_prepare() {
+ # gentoo bug #331111
+ sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am || die
+ sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am || die
+
+ # bug with glibc-2.16.0
+ sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h || die
+
+ eautoreconf
+
+ # places for us to work in
+ mkdir -p "${MYFILESDIR}" || die
+ # Now we store the settings we just created
+ set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" || die
+
+ # Prepare our custom files
+ einfo "Building custom configuration files"
+ local i # our iterator
+ local sedexpr # var for sed expr
+ sedexpr=''
+ for i in ${ENV_SETTINGS_AMANDA} ; do
+ local val
+ eval "val=\"\${${i}}\""
+ sedexpr="${sedexpr}s|__${i}__|${val}|g;"
+ done
+
+ # now apply the sed expr
+ for i in "${FILESDIR}"/amanda-* ; do
+ sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" || die
+ done
+
+ if use minimal; then
+ cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 > "${T}"/amandahosts || die
+ else
+ sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \
+ server-src/am{addclient,serverconfig}.pl || die
+ cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 > "${T}"/amandahosts || die
+ fi
+
+ eapply_user
+}
+
+src_configure() {
+ # fix bug #36316
+ addpredict /var/cache/samba/gencache.tdb
+ # fix bug #376169
+ addpredict /run/blkid
+ addpredict /etc/blkid.tab
+
+ [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+ source "${TMPENVFILE}"
+ local myconf
+
+ einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
+ myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
+ einfo "Using ${AMANDA_SERVER_TAPE_DEVICE} for tape server."
+ myconf="${myconf} --with-tape-device=${AMANDA_SERVER_TAPE_DEVICE}"
+ einfo "Using ${AMANDA_SERVER_INDEX} for index server."
+ myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
+ einfo "Using ${AMANDA_USER_NAME} for amanda user."
+ myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
+ einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
+ myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
+ einfo "Using ${AMANDA_TAR} as Tar implementation."
+ myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
+ einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
+ myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
+ einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
+ myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
+ einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
+ myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
+
+ if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
+ eerror "If you want _both_ UDP and TCP ports, please use only the"
+ eerror "AMANDA_PORTS environment variable for identical ports, or set"
+ eerror "AMANDA_PORTS_BOTH."
+ die "Bad port setup!"
+ fi
+ if [ -n "${AMANDA_PORTS_UDP}" ]; then
+ einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
+ myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
+ fi
+ if [ -n "${AMANDA_PORTS_TCP}" ]; then
+ einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
+ myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
+ fi
+ if [ -n "${AMANDA_PORTS}" ]; then
+ einfo "Using ports ${AMANDA_PORTS/,/-}"
+ myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
+ fi
+
+ # Extras
+ # Speed option
+ myconf="${myconf} --with-buffered-dump"
+ # "debugging" in the configuration is NOT debug in the conventional sense.
+ # It is actually just useful output in the application, and should remain
+ # enabled. There are some cases of breakage with MTX tape changers as of
+ # 2.5.1p2 that it exposes when turned off as well.
+ myconf="${myconf} --with-debugging"
+ # Where to put our files
+ myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
+
+ # Samba support
+ myconf="${myconf} $(use_with samba smbclient /usr/bin/smbclient)"
+
+ # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
+ # default
+ myconf="${myconf} --with-bsd-security"
+ myconf="${myconf} --with-ssh-security"
+ myconf="${myconf} --with-bsdudp-security"
+ myconf="${myconf} --with-bsdtcp-security"
+
+ # kerberos-security mechanism version 5
+ myconf="${myconf} $(use_with kerberos krb5-security)"
+
+ # Amazon S3 support
+ myconf="${myconf} `use_enable s3 s3-device`"
+
+ # libcurl is required for S3 but otherwise optional
+ if ! use s3; then
+ myconf="${myconf} $(use_with curl libcurl)"
+ fi
+
+ # Client only, as requested in bug #127725
+ if use minimal ; then
+ myconf="${myconf} --without-server"
+ else
+ # amplot
+ myconf="${myconf} $(use_with gnuplot)"
+ fi
+
+ # IPv6 fun.
+ myconf="${myconf} `use_with ipv6`"
+ # This is to prevent the IPv6-is-working test
+ # As the test fails on binpkg build hosts with no IPv6.
+ use ipv6 && export amanda_cv_working_ipv6=yes
+
+ # I18N
+ myconf="${myconf} `use_enable nls`"
+
+ # Bug #296634: Perl location
+ perl_set_version
+ myconf="${myconf} --with-amperldir=${VENDOR_LIB}"
+
+ # Bug 296633: --disable-syntax-checks
+ # Some tests are not safe for production systems
+ myconf="${myconf} --disable-syntax-checks"
+
+ # build manpages
+ myconf="${myconf} --enable-manpage-build"
+
+ # Bug #636262
+ myconf="${myconf} $(use_with ndmp ndmp)"
+
+ # bug #483120
+ tc-export AR
+
+ econf \
+ $(use_with readline) \
+ ${myconf}
+}
+
+src_compile() {
+ # Again, do not want the perl-module src_compile
+ default_src_compile
+}
+
+src_install() {
+ [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+ source ${TMPENVFILE}
+
+ einfo "Doing stock install"
+ emake DESTDIR="${D}" install
+
+ # Build the envdir file
+ # Don't forget this..
+ einfo "Building environment file"
+ (
+ echo "# These settings are what was present in the environment when this"
+ echo "# Amanda was compiled. Changing anything below this comment will"
+ echo "# have no effect on your application, but it merely exists to"
+ echo "# preserve them for your next emerge of Amanda"
+ cat "${TMPENVFILE}" | sed "s,=\$,='',g"
+ ) >> "${MYFILESDIR}/${ENVDFILE}"
+
+ # Env.d
+ einfo "Installing environment config file"
+ doenvd "${MYFILESDIR}/${ENVDFILE}"
+
+ einfo "Installing systemd service and socket files for Amanda"
+ systemd_dounit "${FILESDIR}"/amanda.socket
+ systemd_newunit "${FILESDIR}"/amanda.service 'amanda@.service'
+
+ # Lock down next section (up until docs).
+ insopts -m0640
+ # Installing Amanda Xinetd Services Definition
+ einfo "Installing xinetd service file"
+ insinto /etc/xinetd.d
+ if use minimal ; then
+ newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda
+ else
+ newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda
+ fi
+
+ if ! use minimal; then
+ einfo "Installing Sample Daily Cron Job for Amanda"
+ insinto /etc/cron.daily
+ newins "${MYFILESDIR}/amanda-cron" amanda
+ fi
+
+ insinto /etc/amanda
+ einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
+ doins "${T}/amandahosts"
+ fperms 600 /etc/amanda/amandahosts
+
+ dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts"
+ insinto "${AMANDA_USER_HOMEDIR}"
+ einfo "Installing .profile for ${AMANDA_USER_NAME} user"
+ newins "${MYFILESDIR}/amanda-profile" .profile
+
+ insinto /etc/amanda
+ doins "${S}/example/amanda-client.conf"
+ if ! use minimal ; then
+ insinto "/etc/amanda/${AMANDA_CONFIG_NAME}"
+ doins "${S}/example/amanda.conf"
+ doins "${S}/example/disklist"
+ keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index"
+ fi
+
+ keepdir "${AMANDA_TAR_LISTDIR}"
+ keepdir "${AMANDA_USER_HOMEDIR}/amanda"
+ keepdir "${AMANDA_TMPDIR}/dumps"
+ # Just make sure it exists for XFS to work...
+ use xfs && keepdir /var/xfsdump/inventory
+
+ local i
+ for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
+ "${AMANDA_TMPDIR}" /etc/amanda; do
+ einfo "Securing directory (${i})"
+ fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
+ done
+ # Do NOT use -R
+ fperms 0700 \
+ "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
+ "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \
+ "${AMANDA_USER_HOMEDIR}/amanda" \
+ /etc/amanda
+
+ if ! use minimal ; then
+ fperms 0700 \
+ "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \
+ /etc/amanda/${AMANDA_CONFIG_NAME}
+ fi
+
+ einfo "Setting setuid permissions"
+ amanda_permissions_fix "${D}"
+
+ # Relax permissions again
+ insopts -m0644
+
+ # docs
+ einfo "Installing documentation"
+ dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING
+ # our inetd sample
+ einfo "Installing standard inetd sample"
+ newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample
+ # Amanda example configs
+ einfo "Installing example configurations"
+ rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} || die
+ mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" || die
+ docinto example1
+ newdoc "${FILESDIR}/example_amanda.conf" amanda.conf
+ newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist
+ newdoc "${FILESDIR}/example_global.conf" global.conf
+
+ einfo "Cleaning up dud .la files"
+ perl_set_version
+ find "${D}"/"${VENDOR_LIB}" -name '*.la' -delete || die
+}
+
+pkg_postinst() {
+ [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \
+ TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}"
+ [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
+ source "${TMPENVFILE}"
+
+ # Migration of amandates from /etc to $localstatedir/amanda
+ if [ -f "${ROOT}/etc/amandates" -a \
+ ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
+ einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
+ einfo "A backup is also placed at /etc/amandates.orig"
+ cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" || die
+ mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" || die
+ cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" || die
+ fi
+ if [ -f "${ROOT}/etc/amandates" ]; then
+ einfo "If you have migrated safely, please delete /etc/amandates"
+ fi
+
+ einfo "Checking setuid permissions"
+ amanda_permissions_fix "${ROOT}"
+
+ elog "You should configure Amanda in /etc/amanda now."
+ elog
+ elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
+ elog "and restart xinetd afterwards!"
+ elog
+ elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample"
+ elog "as an example of how to configure your inetd."
+ elog
+ elog "systemd-users: enable and start amanda.socket or the relevant services"
+ elog "regarding what auth method you use."
+ elog
+ elog "NOTICE: If you need raw access to partitions you need to add the"
+ elog "amanda user to the 'disk' group."
+ elog
+ elog "NOTICE: If you have a tape changer, you need to add the amanda user"
+ elog "to the 'tape' group."
+ elog
+ elog "If you use localhost in your disklist your restores may break."
+ elog "You should replace it with the actual hostname!"
+ elog "Please also see the syntax changes to amandahosts."
+ elog "The only exception is when you use the authentication method 'local'."
+ elog
+ elog "Please note that this package no longer explicitly depends on"
+ elog "virtual/inetd, as it supports modes where an inetd is not needed"
+ elog "(see bug #506028 for details)."
+}
+
+# We have had reports of amanda file permissions getting screwed up.
+# Losing setuid, becoming too lax etc.
+# ONLY root and users in the amanda group should be able to run these binaries!
+amanda_permissions_fix() {
+ local root="$1"
+ [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
+ local le="/usr/libexec/amanda"
+ local i
+ for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
+ "${le}"/rundump "${le}"/runtar "${le}"/dumper \
+ "${le}"/planner ; do
+ [ -e "${root}"/${i} ] || continue
+ chown root:${AMANDA_GROUP_NAME} "${root}"/${i} || die
+ chmod u=srwx,g=rx,o= "${root}"/${i} || die
+ done
+
+ # amanda-security.conf is a config file with similar requirements:
+ # writable only by root
+ # world-readable
+ # 3.3.9: introduced in /etc/amanda-security.conf
+ # 3.4.2: moved to /etc/amanda/amanda-security.conf
+ f=/etc/amanda/amanda-security.conf
+ chown root:root "${root}""${f}" || die
+ chmod u=rw,go=r "${root}""${f}" || die
+}
+
+# We do not want the perl-module tests.
+src_test() {
+ default_src_test
+}