diff options
Diffstat (limited to 'dev-lang/perl/perl-5.32.1.ebuild')
| -rw-r--r-- | dev-lang/perl/perl-5.32.1.ebuild | 822 |
1 files changed, 0 insertions, 822 deletions
diff --git a/dev-lang/perl/perl-5.32.1.ebuild b/dev-lang/perl/perl-5.32.1.ebuild deleted file mode 100644 index 97963cf4402c..000000000000 --- a/dev-lang/perl/perl-5.32.1.ebuild +++ /dev/null @@ -1,822 +0,0 @@ -# Copyright 1999-2021 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 - -inherit alternatives flag-o-matic toolchain-funcs multilib multiprocessing - -PATCH_VER=1 -CROSS_VER=1.3.4 -PATCH_BASE="perl-5.32.0-patches-${PATCH_VER}" -PATCH_DEV=kentnl - -DIST_AUTHOR=XSAWYERX - -# Greatest first, don't include yourself -# Devel point-releases are not ABI-intercompatible, but stable point releases are -# BIN_OLDVERSEN is contains only C-ABI-intercompatible versions -PERL_BIN_OLDVERSEN="" - -# Yes we can. -PERL_SINGLE_SLOT=y - -if [[ "${PV##*.}" == "9999" ]]; then - DIST_VERSION=5.30.0 -else - DIST_VERSION="${PV/_rc/-RC}" -fi -SHORT_PV="${DIST_VERSION%.*}" -# Even numbered major versions are ABI intercompatible -# Odd numbered major versions are not -if [[ $(( ${SHORT_PV#*.} % 2 )) == 1 ]]; then - SUBSLOT="${DIST_VERSION%-RC*}" -else - SUBSLOT="${DIST_VERSION%.*}" -fi -# Used only in tar paths -MY_P="perl-${DIST_VERSION}" -# Used in library paths -MY_PV="${DIST_VERSION%-RC*}" - -DESCRIPTION="Larry Wall's Practical Extraction and Report Language" - -SRC_URI=" - mirror://cpan/src/5.0/${MY_P}.tar.xz - mirror://cpan/authors/id/${DIST_AUTHOR:0:1}/${DIST_AUTHOR:0:2}/${DIST_AUTHOR}/${MY_P}.tar.xz - https://github.com/gentoo-perl/perl-patchset/releases/download/${PATCH_BASE}/${PATCH_BASE}.tar.xz - https://dev.gentoo.org/~${PATCH_DEV}/distfiles/${PATCH_BASE}.tar.xz - https://github.com/arsv/perl-cross/releases/download/${CROSS_VER}/perl-cross-${CROSS_VER}.tar.gz -" -HOMEPAGE="https://www.perl.org/" - -LICENSE="|| ( Artistic GPL-1+ )" -SLOT="0/${SUBSLOT}" - -if [[ "${PV##*.}" != "9999" ]] && [[ "${PV/rc//}" == "${PV}" ]] ; then -# SOMEWHAT EXPERIMENTAL CODE, DO NOT USE WITHOUT AN ADULT PRESENT, CHECK CHANGELOG -# FOR DETAILS -KEYWORDS="~alpha amd64 arm arm64 hppa ~ia64 ~m68k ~mips ppc ppc64 ~riscv ~s390 sparc x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris" -fi - -IUSE="berkdb debug doc gdbm ithreads minimal" - -RDEPEND=" - berkdb? ( sys-libs/db:= ) - gdbm? ( >=sys-libs/gdbm-1.8.3:= ) - app-arch/bzip2 - sys-libs/zlib - virtual/libcrypt:= -" -DEPEND="${RDEPEND}" -BDEPEND="${RDEPEND}" - -PDEPEND=" - !minimal? ( - >=app-admin/perl-cleaner-2.5 - >=virtual/perl-File-Temp-0.230.400-r2 - >=virtual/perl-Data-Dumper-2.154.0 - virtual/perl-Test-Harness - ) -" -# bug 390719, bug 523624 -# virtual/perl-Test-Harness is here for the bundled ExtUtils::MakeMaker - -S="${WORKDIR}/${MY_P}" - -dual_scripts() { - src_remove_dual perl-core/Archive-Tar 2.360.0 ptar ptardiff ptargrep - src_remove_dual perl-core/CPAN 2.270.0 cpan - src_remove_dual perl-core/Digest-SHA 6.20.0 shasum - src_remove_dual perl-core/Encode 3.60.0 enc2xs piconv - src_remove_dual perl-core/ExtUtils-MakeMaker 7.440.0 instmodsh - src_remove_dual perl-core/ExtUtils-ParseXS 3.400.0 xsubpp - src_remove_dual perl-core/IO-Compress 2.93.0 zipdetails - src_remove_dual perl-core/JSON-PP 4.40.0 json_pp - src_remove_dual perl-core/Module-CoreList 5.202.101.23 corelist - src_remove_dual perl-core/Pod-Checker 1.730.0 podchecker - src_remove_dual perl-core/Pod-Perldoc 3.280.100 perldoc - src_remove_dual perl-core/Pod-Usage 1.690.0 pod2usage - src_remove_dual perl-core/Test-Harness 3.420.0 prove - src_remove_dual perl-core/podlators 4.140.0 pod2man pod2text - src_remove_dual_man perl-core/podlators 4.140.0 /usr/share/man/man1/perlpodstyle.1 -} - -check_rebuild() { - # Fresh install - if [[ -z "${REPLACING_VERSIONS}" ]]; then - return 0; - # Major Upgrade - # doesn't matter if there's multiple copies, it still needs a rebuild - # if the string is anything other than "5.CURRENTMAJOR" - elif [[ "${REPLACING_VERSIONS%.*}" != "${PV%.*}" ]]; then - echo "" - ewarn "UPDATE THE PERL MODULES:" - ewarn "After updating dev-lang/perl the installed Perl modules" - ewarn "have to be re-installed. In most cases, this is done automatically" - ewarn "by the package manager, but subsequent steps are still recommended" - ewarn "to ensure system consistency." - ewarn - ewarn "You should start with a depclean to remove any unused perl dependencies" - ewarn "that may confuse portage in future. Regular depcleans are also encouraged" - ewarn "as part of your regular update cycle, as that will keep perl upgrades working." - ewarn "Recommended: emerge --depclean -va" - ewarn - ewarn "You should then call perl-cleaner to clean up any old files and trigger any" - ewarn "remaining rebuilds portage may have missed." - ewarn "Use: perl-cleaner --all" - return 0; - - # Reinstall w/ USE Change - elif ( use ithreads && ! has_version dev-lang/perl[ithreads] ) || \ - ( ! use ithreads && has_version dev-lang/perl[ithreads] ) || \ - ( use debug && ! has_version dev-lang/perl[debug] ) || \ - ( ! use debug && has_version dev-lang/perl[debug] ) ; then - echo "" - ewarn "TOGGLED USE-FLAGS WARNING:" - ewarn "You changed one of the use-flags ithreads or debug." - ewarn "You must rebuild all perl-modules installed." - ewarn "Use: perl-cleaner --modules ; perl-cleaner --force --libperl" - fi -} - -pkg_setup() { - case ${CHOST} in - *-freebsd*) osname="freebsd" ;; - *-dragonfly*) osname="dragonfly" ;; - *-netbsd*) osname="netbsd" ;; - *-openbsd*) osname="openbsd" ;; - *-darwin*) osname="darwin" ;; - *-solaris*) osname="solaris" ;; - *-cygwin*) osname="cygwin" ;; - *) osname="linux" ;; - esac - - myarch="${CHOST%%-*}-${osname}" - if use debug ; then - myarch+="-debug" - fi - if use ithreads ; then - mythreading="-multi" - myarch+="-thread" - fi - - PRIV_BASE="/usr/$(get_libdir)/perl5" - SITE_BASE="/usr/local/$(get_libdir)/perl5" - VENDOR_BASE="/usr/$(get_libdir)/perl5/vendor_perl" - - LIBPERL="libperl$(get_libname ${MY_PV} )" - - # This ENV var tells perl to build with a directory like "5.30" - # regardless of its patch version. This is for experts only - # at this point. - if [[ -z "${PERL_SINGLE_SLOT}" ]]; then - PRIV_LIB="${PRIV_BASE}/${MY_PV}" - ARCH_LIB="${PRIV_BASE}/${MY_PV}/${myarch}${mythreading}" - SITE_LIB="${SITE_BASE}/${MY_PV}" - SITE_ARCH="${SITE_BASE}/${MY_PV}/${myarch}${mythreading}" - VENDOR_LIB="${VENDOR_BASE}/${MY_PV}" - VENDOR_ARCH="${VENDOR_BASE}/${MY_PV}/${myarch}${mythreading}" - else - PRIV_LIB="${PRIV_BASE}/${SUBSLOT}" - ARCH_LIB="${PRIV_BASE}/${SUBSLOT}/${myarch}${mythreading}" - SITE_LIB="${SITE_BASE}/${SUBSLOT}" - SITE_ARCH="${SITE_BASE}/${SUBSLOT}/${myarch}${mythreading}" - VENDOR_LIB="${VENDOR_BASE}/${SUBSLOT}" - VENDOR_ARCH="${VENDOR_BASE}/${SUBSLOT}/${myarch}${mythreading}" - fi - - dual_scripts -} - -src_remove_dual_file() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - alternatives_auto_makesym "${i}" "${i}-[0-9]*" - done - ;; - setup) - for i in "$@" ; do - if [[ -f ${EROOT}${i} && ! -h ${EROOT}${i} ]] ; then - has_version ${pkg} && ewarn "You must reinstall ${pkg} !" - break - fi - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i}{,-${ver}-${P}} || die - done - ;; - esac -} - -src_remove_dual_man() { - local i pkg ver ff - pkg="$1" - ver="$2" - shift 2 - case "${EBUILD_PHASE:-none}" in - postinst|postrm) - for i in "$@" ; do - ff=`echo "${EROOT}${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}}"*` - ff=${ff##*${i#${i%.[0-9]}}} - alternatives_auto_makesym "${i}${ff}" "${i%.[0-9]}-[0-9]*" - done - ;; - install) - for i in "$@" ; do - if ! [[ -f "${ED}"${i} ]] ; then - ewarn "${i} does not exist!" - continue - fi - mv "${ED}"${i} "${ED}"${i%.[0-9]}-${ver}-${P}${i#${i%.[0-9]}} || die - done - ;; - esac -} - -src_remove_dual() { - local i pkg ver - pkg="$1" - ver="$2" - shift 2 - for i in "$@" ; do - src_remove_dual_file "${pkg}" "${ver}" "/usr/bin/${i}" - src_remove_dual_man "${pkg}" "${ver}" "/usr/share/man/man1/${i}.1" - done -} - -src_prepare_perlcross() { - cp -a ../perl-cross-${CROSS_VER}/* . || die - - # bug 604072 - MAKEOPTS+=" -j1" - export MAKEOPTS -} -src_prepare_dynamic() { - ln -s ${LIBPERL} libperl$(get_libname ${SHORT_PV}) || die - ln -s ${LIBPERL} libperl$(get_libname ) || die -} - -# Copy a patch into the patch series -# add_patch SRC_PATH DEST_NAME ['description'] ['bug'] ['bug'] -# - description is optional, but recommended -# - all arguments after descriptions are bug URLs -add_patch() { - local patchdir="${WORKDIR}/patches" - local infodir="${WORKDIR}/patch-info" - local src_name dest_name desc - src_name="$1" - dest_name="$2" - desc="$3" - shift; shift; shift; - einfo "Adding ${dest_name} to patch bundle" - cp "${src_name}" "${patchdir}/${dest_name}" || die "Couldn't copy ${src_name} to ${dest_name}" - if [[ -n "${desc}" ]]; then - printf "%s" "${desc}" > "${infodir}/${dest_name}.desc" || die "Couldn't write ${dest_name}.desc" - fi - if [[ $# -gt 0 ]]; then - # Note: when $@ is more than one element, this emits a - # line for each element - printf "%s\n" "$@" > "${infodir}/${dest_name}.bugs" || die "Couldn't write ${dest_name}.bugs" - fi -} -# Remove a patch using a glob expr -# eg: -# rm_patch *-darin-Use-CC* -# -rm_patch() { - local patchdir="${WORKDIR}/patches" - local expr="$1" - local patch="$( cd "${patchdir}"; echo $expr )" - einfo "Removing $patch ($expr) from patch bundle" - if [[ -e "${patchdir}/${patch}" ]]; then - rm -f "${patchdir}/${patch}" || die "Can't remove ${patch} ( $expr )" - else - ewarn "No ${expr} found in ${patchdir} to remove" - fi -} -# Yes, this is a reasonable amount of code for something seemingly simple -# but this is far easier to debug when things go wrong, and things went wrong -# multiple times while I was getting the exact number of slashes right, which -# requires circumnavigating both bash and sed escape mechanisms. -c_escape_string() { - local slash dquote - slash='\' - dquote='"' - re_slash="${slash}${slash}" - re_dquote="${slash}${dquote}" - - # Convert \ to \\, - # " to \" - echo "$1" |\ - sed "s|${re_slash}|${re_slash}${re_slash}|g" |\ - sed "s|${re_dquote}|${re_slash}${re_dquote}|g" -} -c_escape_file() { - c_escape_string "$(cat "$1")" -} - -apply_patchdir() { - local patchdir="${WORKDIR}/patches" - local infodir="${WORKDIR}/patch-info" - local patchoutput="patchlevel-gentoo.h" - - # Inject Patch-Level info into description for patchlevel.h patch - # to show in -V - local patch_expr="*List-packaged-patches*" - local patch="$( cd "${patchdir}"; echo $patch_expr )"; - einfo "Injecting patch-level info into ${patch}.desc ( $patch_expr )" - - if [[ -e "${patchdir}/${patch}" ]]; then - printf "List packaged patches for %s(%s) in patchlevel.h" "${PF}" "${PATCH_BASE}"\ - >"${infodir}/${patch}.desc" || die "Can't rewrite ${patch}.desc" - else - eerror "No $patch_expr found in ${patchdir}" - fi - - # Compute patch list to apply - # different name other than PATCHES to stop default - # reapplying it - # Single depth is currently only supported, as artifacts can reside - # from the old layout being multiple-directories, as well as it grossly - # simplifying the patchlevel_gentoo.h generation. - local PERL_PATCHES=($( - find "${patchdir}" -maxdepth 1 -mindepth 1 -type f -printf "%f\n" |\ - grep -E '[.](diff|patch)$' |\ - sort -n - )) - - for patch in "${PERL_PATCHES[@]}"; do - eapply "${WORKDIR}"/patches/${patch} - done - - einfo "Generating $patchoutput" - - # This code creates a header file, each iteration - # creates one-or-more-lines for each entry found in PERL_PATCHES - # and STDOUT is redirected to the .h file - for patch in "${PERL_PATCHES[@]}"; do - local desc_f="${infodir}/${patch}.desc" - local bugs_f="${infodir}/${patch}.bugs" - - printf ',"%s"\n' "${patch}" - if [[ ! -e "${desc_f}" ]]; then - ewarn "No description provided for ${patch} (expected: ${desc_f} )" - else - local desc="$(c_escape_file "${desc_f}")" - printf ',"- %s"\n' "${desc}" - fi - if [[ -e "${bugs_f}" ]]; then - while read -d $'\n' -r line; do - local esc_line="$(c_escape_string "${line}")" - printf ',"- Bug: %s"\n' "${esc_line}" - done <"${bugs_f}" - fi - done > "${S}/${patchoutput}" - printf "%s\n" "${patchoutput}" >> "${S}/MANIFEST" - -} -src_prepare() { - local patchdir="${WORKDIR}/patches" - - # Prepare Patch dir with additional patches / remove unwanted patches - # Inject bug/desc entries for perl -V - if use hppa ; then - # bug 634162 - add_patch "${FILESDIR}/${PN}-5.26.2-hppa.patch" "100-5.26.2-hppa.patch"\ - "Fix broken miniperl on hppa"\ - "https://bugs.debian.org/869122" "https://bugs.gentoo.org/634162" - fi - if [[ ${CHOST} == *-solaris* ]] ; then - # do NOT mess with nsl, on Solaris this is always necessary, - # when -lsocket is used e.g. to get h_errno - rm_patch "*-nsl-and-cl*" - fi - - apply_patchdir - - tc-is-cross-compiler && src_prepare_perlcross - - tc-is-static-only || src_prepare_dynamic - - if use gdbm; then - sed -i "s:INC => .*:INC => \"-I${EROOT}/usr/include/gdbm\":g" \ - ext/NDBM_File/Makefile.PL || die - fi - - # Use errno.h from prefix rather than from host system, bug #645804 - if use prefix && [[ -e "${EPREFIX}"/usr/include/errno.h ]] ; then - sed -i "/my..sysroot/s:'':'${EPREFIX}':" ext/Errno/Errno_pm.PL || die - fi - - if [[ ${CHOST} == *-solaris* ]] ; then - # set a soname, fix linking against just built libperl - sed -i -e 's/netbsd\*/netbsd*|solaris*/' Makefile.SH || die - fi - - if [[ ${CHOST} == *-darwin* ]] ; then - # fix install_name (soname) not to reference $D - sed -i -e '/install_name `pwd/s/`pwd`/\\$(shrpdir)/' Makefile.SH || die - fi - - default -} - -myconf() { - # the myconf array is declared in src_configure - myconf=( "${myconf[@]}" "$@" ) -} - -# Outputs a list of versions which have been seen in any of the -# primary perl @INC prefix paths, such as: -# /usr/lib64/perl5/<NUMBER> -# /usr/local/lib64/perl5/<NUMBER> -# /usr/lib64/perl5/vendor_perl/<NUMBER> -# -# All values of NUMBER must be like "5.x.y", unless PERL_SUPPORT_SINGLE_SLOT -# is enabled, where it will also allow numbers like "5.x" -# -# PERL_SUPPORT_SINGLE_SLOT should only be used to transition *away* from PERL_SINGLE_SLOT -# if you used that. -find_candidate_inc_versions() { - local regex='.*/5[.][0-9]+[.][0-9]+$'; - if [[ ! -z "${PERL_SUPPORT_SINGLE_SLOT}" || ! -z "${PERL_SINGLE_SLOT}" ]]; then - regex='.*/5[.][0-9]+\([.][0-9]+\|\)$' - fi - local dirs=( - "${EROOT}${PRIV_BASE}" - "${EROOT}${SITE_BASE}" - "${EROOT}${VENDOR_BASE}" - ) - for dir in "${dirs[@]}"; do - if [[ ! -e "${dir}" ]]; then - continue - fi - # Without access to readdir() on these dirs, find will not be able - # to reveal any @INC directories inside them, and will subsequently prune - # them from the built perl's @INC support, breaking our compatiblity options - # entirely. - if [[ ! -r "${dir}" || ! -x "${dir}" ]]; then - eerror "Bad permissions on ${dir}, this will probably break things" - eerror "Ensure ${dir} is +rx for at least uid=$EUID" - eerror "Recommended permission is +rx for all" - eerror "> chmod o+rx ${dir}" - fi - done - einfo "Scanning for old @INC dirs matching '$regex' in: ${dirs[*]}" - find "${dirs[@]}" -maxdepth 1 -mindepth 1 -type d -regex "${regex}" -printf "%f " 2>/dev/null -} -# Sort versions passed versiony-ly, remove self-version if present -# dedup. Takes each version as an argument -sanitize_inc_versions() { - local vexclude="${DIST_VERSION%-RC}" - if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then - vexclude="${SUBSLOT}" - fi - einfo "Normalizing/Sorting candidate list: $*" - einfo " to remove '${vexclude}'" - # Note, general numeric sort has to be used - # for the last component, or unique will convert - # 5.30.0 + 5.30 into just 5.30 - printf "%s\n" "$@" |\ - grep -vxF "${vexclude}" |\ - sort -u -nr -t'.' -k1,1rn -k2,2rn -k3,3rg -} - -versions_to_inclist() { - local oldv="${PERL_BIN_OLDVERSEN}" - if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then - oldv="${DIST_VERSION%-RC} ${PERL_BIN_OLDVERSEN}" - fi - for v; do - has "${v}" ${oldv} && echo -n "${v}/${myarch}${mythreading}/ "; - echo -n "${v}/ "; - done -} -versions_to_gentoolibdirs() { - local oldv="${PERL_BIN_OLDVERSEN}" - local root - local v - if [[ ! -z "${PERL_SINGLE_SLOT}" ]]; then - oldv="${DIST_VERSION%-RC} ${PERL_BIN_OLDVERSEN}" - fi - for v; do - for root in "${PRIV_BASE}" "${VENDOR_BASE}" "${SITE_BASE}"; do - local fullpath="${EROOT}${root}/${v}" - if [[ -e "${fullpath}" ]]; then - has "${v}" ${oldv} && printf "%s:" "${fullpath}/${myarch}${mythreading}"; - printf "%s:" "${fullpath}" - fi - done - done -} - -src_configure() { - declare -a myconf - - export LC_ALL="C" - [[ ${COLUMNS:-1} -ge 1 ]] || unset COLUMNS # bug #394091 - - # Perl has problems compiling with -Os in your flags with glibc - use elibc_uclibc || replace-flags "-Os" "-O2" - - # xlocale.h is going away in glibc-2.26, so it's counterproductive - # if we use it and include it in CORE/perl.h ... Perl builds just - # fine with glibc and locale.h only. - # However, the darwin prefix people have no locale.h ... - use elibc_glibc && myconf -Ui_xlocale - - # This flag makes compiling crash in interesting ways - filter-flags "-malign-double" - - # Generic LTO broken since 5.28, triggers EUMM failures - filter-flags "-flto" - - use sparc && myconf -Ud_longdbl - - export BUILD_BZIP2=0 - export BZIP2_INCLUDE=${EROOT}/usr/include - export BZIP2_LIB=${EROOT}/usr/$(get_libdir) - - export BUILD_ZLIB=False - export ZLIB_INCLUDE=${EROOT}/usr/include - export ZLIB_LIB=${EROOT}/usr/$(get_libdir) - - # allow either gdbm to provide ndbm (in <gdbm/ndbm.h>) or db1 - myndbm='U' - mygdbm='U' - mydb='U' - if use gdbm ; then - mygdbm='D' - if use berkdb ; then - myndbm='D' - fi - fi - if use berkdb ; then - mydb='D' - has_version '=sys-libs/db-1*' && myndbm='D' - fi - - myconf "-${myndbm}i_ndbm" "-${mygdbm}i_gdbm" "-${mydb}i_db" - - if use alpha && [[ "$(tc-getCC)" = "ccc" ]] ; then - ewarn "Perl will not be built with berkdb support, use gcc if you needed it..." - myconf -Ui_db -Ui_ndbm - fi - - use ithreads && myconf -Dusethreads - - if use debug ; then - append-cflags "-g" - myconf -DDEBUGGING - elif [[ ${CFLAGS} == *-g* ]] ; then - myconf -DDEBUGGING=-g - else - myconf -DDEBUGGING=none - fi - - # modifying 'optimize' prevents cross configure script from appending required flags - if tc-is-cross-compiler; then - append-cflags "-fwrapv -fno-strict-aliasing" - fi - - # Autodiscover all old version directories, some of them will even be newer - # if you downgrade - if [[ -z ${PERL_OLDVERSEN} ]]; then - PERL_OLDVERSEN="$( find_candidate_inc_versions )" - fi - - # Fixup versions, removing self match, fixing order and dupes - PERL_OLDVERSEN="$( sanitize_inc_versions ${PERL_OLDVERSEN} )" - - # Experts who want a "Pure" install can set PERL_OLDVERSEN to an empty string - if [[ -n "${PERL_OLDVERSEN// }" ]]; then - local inclist="$( versions_to_inclist ${PERL_OLDVERSEN} )" - einfo "This version of perl may partially support modules previously" - einfo "installed in any of the following paths:" - for incpath in ${inclist}; do - [[ -e "${EROOT}${VENDOR_BASE}/${incpath}" ]] && einfo " ${EROOT}${VENDOR_BASE}/${incpath}" - [[ -e "${EROOT}${PRIV_BASE}/${incpath}" ]] && einfo " ${EROOT}${PRIV_BASE}/${incpath}" - [[ -e "${EROOT}${SITE_BASE}/${incpath}" ]] && einfo " ${EROOT}${SITE_BASE}/${incpath}" - done - einfo "This is a temporary measure and you should aim to cleanup these paths" - einfo "via world updates and perl-cleaner" - # myconf -Dinc_version_list="${inclist}" - myconf -Dgentoolibdirs="$( versions_to_gentoolibdirs ${PERL_OLDVERSEN} )" - fi - - [[ ${ELIBC} == "FreeBSD" ]] && myconf "-Dlibc=/usr/$(get_libdir)/libc.a" - - # Make sure we can do the final link #523730, need to set deployment - # target to override hardcoded 10.3 which breaks on modern OSX - [[ ${CHOST} == *-darwin* ]] && \ - myconf "-Dld=env MACOSX_DEPLOYMENT_TARGET=${MACOSX_DEPLOYMENT_TARGET} $(tc-getCC)" - - # Older macOS with non-Apple GCC chokes on inline in system headers - # using c89 mode as injected by cflags.SH - [[ ${CHOST} == *-darwin* && ${CHOST##*darwin} -le 9 ]] && tc-is-gcc && \ - append-cflags -Dinline=__inline__ - - # flock on 32-bit sparc Solaris is broken, fall back to fcntl - [[ ${CHOST} == sparc-*-solaris* ]] && \ - myconf -Ud_flock - - # Prefix: the host system needs not to follow Gentoo multilib stuff, and in - # Prefix itself we don't do multilib either, so make sure perl can find - # something compatible. - if use prefix ; then - # Set a hook to check for each detected library whether it actually works. - export libscheck=" - ( echo 'main(){}' > '${T}'/conftest.c && - $(tc-getCC) -o '${T}'/conftest '${T}'/conftest.c -l\$thislib >/dev/null 2>/dev/null - ) || xxx=/dev/null" - - # Use all host paths that might contain useful stuff, the hook above will filter out bad choices. - local paths="/lib/*-linux-gnu /usr/lib/*-linux-gnu /lib64 /lib/64 /usr/lib64 /usr/lib/64 /lib32 /usr/lib32 /lib /usr/lib" - myconf "-Dlibpth=${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir) ${paths}" - elif [[ $(get_libdir) != "lib" ]] ; then - # We need to use " and not ', as the written config.sh use ' ... - myconf "-Dlibpth=/usr/local/$(get_libdir) /$(get_libdir) /usr/$(get_libdir)" - fi - - # don't try building ODBM, bug #354453 - disabled_extensions="ODBM_File" - - if ! use gdbm ; then - # workaround for bug #157774: don't try building GDBM related stuff with USE="-gdbm" - disabled_extensions="${disabled_extensions} GDBM_File NDBM_File" - fi - - myconf -Dnoextensions="${disabled_extensions}" - - [[ "${PV##*.}" == "9999" ]] && myconf -Dusedevel -Uversiononly - - [[ -n "${EXTRA_ECONF}" ]] && ewarn During Perl build, EXTRA_ECONF=${EXTRA_ECONF} - # allow fiddling via EXTRA_ECONF, bug 558070 - eval "local -a EXTRA_ECONF=(${EXTRA_ECONF})" - - # setting -Dld= to tc-getLD breaks perl and all perl things - # https://github.com/Perl/perl5/issues/17791#issuecomment-630145202 - myconf \ - -Duseshrplib \ - -Darchname="${myarch}" \ - -Dcc="$(tc-getCC)" \ - -Dar="$(tc-getAR)" \ - -Dnm="$(tc-getNM)" \ - -Dcpp="$(tc-getCPP)" \ - -Dranlib="$(tc-getRANLIB)" \ - -Doptimize="${CFLAGS}" \ - -Dldflags="${LDFLAGS}" \ - -Dprefix="${EPREFIX}"'/usr' \ - -Dsiteprefix="${EPREFIX}"'/usr/local' \ - -Dvendorprefix="${EPREFIX}"'/usr' \ - -Dscriptdir="${EPREFIX}"'/usr/bin' \ - -Dprivlib="${EPREFIX}${PRIV_LIB}" \ - -Darchlib="${EPREFIX}${ARCH_LIB}" \ - -Dsitelib="${EPREFIX}${SITE_LIB}" \ - -Dsitearch="${EPREFIX}${SITE_ARCH}" \ - -Dvendorlib="${EPREFIX}${VENDOR_LIB}" \ - -Dvendorarch="${EPREFIX}${VENDOR_ARCH}" \ - -Dman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dsiteman1dir="${EPREFIX}"/usr/local/man/man1 \ - -Dsiteman3dir="${EPREFIX}"/usr/local/man/man3 \ - -Dvendorman1dir="${EPREFIX}"/usr/share/man/man1 \ - -Dvendorman3dir="${EPREFIX}"/usr/share/man/man3 \ - -Dman1ext='1' \ - -Dman3ext='3pm' \ - -Dlibperl="${LIBPERL}" \ - -Dlocincpth="${EPREFIX}"'/usr/include ' \ - -Dglibpth="${EPREFIX}/$(get_libdir) ${EPREFIX}/usr/$(get_libdir)"' ' \ - -Duselargefiles \ - -Dd_semctl_semun \ - -Dcf_by='Gentoo' \ - -Dmyhostname='localhost' \ - -Dperladmin='root@localhost' \ - -Ud_csh \ - -Dsh="${EPREFIX}"/bin/sh \ - -Dtargetsh="${EPREFIX}"/bin/sh \ - -Uusenm \ - "${myconf[@]}" \ - "${EXTRA_ECONF[@]}" - - if tc-is-cross-compiler; then - ./configure \ - --target="${CHOST}" \ - --build="${CBUILD}" \ - -Dinstallprefix='' \ - -Dinstallusrbinperl='undef' \ - -Dusevendorprefix='define' \ - "${myconf[@]}" \ - || die "Unable to configure" - else - sh Configure \ - -des \ - -Dinstallprefix="${EPREFIX}"'/usr' \ - -Dinstallusrbinperl='n' \ - "${myconf[@]}" \ - || die "Unable to configure" - fi -} - -src_test() { - export NO_GENTOO_NETWORK_TESTS=1; - export GENTOO_ASSUME_SANDBOXED="${GENTOO_ASSUME_SANDBOXED:-1}" - export GENTOO_NO_PORTING_TESTS="${GENTOO_NO_PORTING_TESTS:-1}" - if [[ ${EUID} == 0 ]] ; then - ewarn "Test fails with a sandbox error (#328793) if run as root. Skipping tests..." - return 0 - fi - use elibc_uclibc && export MAKEOPTS+=" -j1" - TEST_JOBS="$(makeopts_jobs)" make test_harness || die "test failed" -} - -src_install() { - local i - local coredir="${ARCH_LIB}/CORE" - - emake DESTDIR="${D}" install - - rm -f "${ED}/usr/bin/perl${MY_PV}" - ln -s perl "${ED}"/usr/bin/perl${MY_PV} || die - - if ! tc-is-static-only ; then - dolib.so "${ED}"${coredir}/${LIBPERL} - rm -f "${ED}"${coredir}/${LIBPERL} - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ${LIBPERL} "${ED}"/usr/$(get_libdir)/libperl$(get_libname) || die - - ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/${LIBPERL} || die - ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/libperl$(get_libname ${SHORT_PV}) || die - ln -sf ../../../../${LIBPERL} "${ED}"${coredir}/libperl$(get_libname) || die - fi - - rm -rf "${ED}"/usr/share/man/man3 || die "Unable to remove module man pages" - - # This removes ${D} from Config.pm - for i in $(find "${D}" -iname "Config.pm" ) ; do - einfo "Removing ${D} from ${i}..." - sed -i -e "s:${D}::" "${i}" || die "Sed failed" - done - - dodoc Changes* README AUTHORS - - if use doc ; then - # HTML Documentation - # We expect errors, warnings, and such with the following. - - dodir /usr/share/doc/${PF}/html - LD_LIBRARY_PATH=. ./perl installhtml \ - --podroot='.' \ - --podpath='lib:ext:pod:vms' \ - --recurse \ - --htmldir="${ED}/usr/share/doc/${PF}/html" - fi - - [[ -d ${ED}/usr/local ]] && rm -r "${ED}"/usr/local - - dual_scripts -} - -pkg_preinst() { - check_rebuild -} - -pkg_postinst() { - dual_scripts - - if [[ "${ROOT}" = "/" ]] ; then - local INC DIR file - INC=$(perl -e 'for $line (@INC) { next if $line eq "."; next if $line =~ m/'${SHORT_PV}'|etc|local|perl$/; print "$line\n" }') - einfo "Removing old .ph files" - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - for file in $(find "${DIR}" -name "*.ph" -type f ) ; do - rm -f "${file}" - einfo "<< ${file}" - done - fi - done - # Silently remove the now empty dirs - for DIR in ${INC} ; do - if [[ -d "${DIR}" ]] ; then - find "${DIR}" -depth -type d -print0 | xargs -0 -r rmdir &> /dev/null - fi - done - - fi -} - -pkg_postrm() { - dual_scripts -} |