summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'sys-boot/grub/grub-0.97-r14.ebuild')
-rw-r--r--sys-boot/grub/grub-0.97-r14.ebuild289
1 files changed, 289 insertions, 0 deletions
diff --git a/sys-boot/grub/grub-0.97-r14.ebuild b/sys-boot/grub/grub-0.97-r14.ebuild
new file mode 100644
index 000000000000..a12f7387b19a
--- /dev/null
+++ b/sys-boot/grub/grub-0.97-r14.ebuild
@@ -0,0 +1,289 @@
+# Copyright 1999-2015 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# XXX: we need to review menu.lst vs grub.conf handling. We've been converting
+# all systems to grub.conf (and symlinking menu.lst to grub.conf), but
+# we never updated any of the source code (it still all wants menu.lst),
+# and there is no indication that upstream is making the transition.
+
+# If you need to roll a new grub-static distfile, here is how.
+# - Robin H. Johnson <robbat2@gentoo.org> - 29 Nov 2010
+# FEATURES='-noauto -noinfo -nodoc -noman -splitdebug nostrip' \
+# USE='static -ncurses -netboot -custom-cflags' \
+# PORTAGE_COMPRESS=true GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \
+# grub-${PVR}.ebuild clean package && \
+# qtbz2 -s -j ${PKGDIR}/${CAT}/${PF}.tbz2 && \
+# mv ${PF}.tar.bz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2
+
+EAPI="4"
+
+inherit eutils mount-boot toolchain-funcs linux-info flag-o-matic autotools pax-utils multiprocessing
+
+PATCHVER="1.14" # Should match the revision ideally
+DESCRIPTION="GNU GRUB Legacy boot loader"
+HOMEPAGE="http://www.gnu.org/software/grub/"
+SRC_URI="mirror://gentoo/${P}.tar.gz
+ mirror://gnu-alpha/${PN}/${P}.tar.gz
+ mirror://gentoo/splash.xpm.gz
+ mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 x86 ~x86-fbsd"
+IUSE="custom-cflags ncurses netboot static"
+
+LIB_DEPEND="ncurses? (
+ >=sys-libs/ncurses-5.9-r3[static-libs(+)]
+ amd64? ( >=sys-libs/ncurses-5.9-r3[abi_x86_32(-)] )
+ )"
+RDEPEND="!static? ( ${LIB_DEPEND//\[static-libs(+)\]/} )"
+DEPEND="${RDEPEND}
+ static? ( ${LIB_DEPEND} )"
+
+pkg_setup() {
+ case $(tc-arch) in
+ amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;;
+ esac
+}
+
+src_prepare() {
+ # Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as
+ # discovered in bug 160801. We can change this, however, using larger values
+ # for this variable means that Grub needs more memory to run and boot. For a
+ # kernel of size N, Grub needs (N+1)*2. Advanced users should set a custom
+ # value in make.conf, it is possible to make kernels ~16Mb in size, but it
+ # needs the kitchen sink built-in.
+ local t="custom"
+ if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then
+ case $(tc-arch) in
+ amd64) GRUB_MAX_KERNEL_SIZE=9 ;;
+ x86) GRUB_MAX_KERNEL_SIZE=5 ;;
+ esac
+ t="default"
+ fi
+ einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)"
+
+ sed -i \
+ -e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \
+ "${S}"/grub/asmstub.c \
+ || die
+
+ EPATCH_SUFFIX="patch" epatch "${WORKDIR}"/patch
+ rm -f "${S}"/aclocal.m4 # seems to keep bug 418287 away
+ eautoreconf
+}
+
+src_configure() {
+ filter-flags -fPIE #168834
+
+ use amd64 && multilib_toolchain_setup x86
+
+ unset BLOCK_SIZE #73499
+
+ ### i686-specific code in the boot loader is a bad idea; disabling to ensure
+ ### at least some compatibility if the hard drive is moved to an older or
+ ### incompatible system.
+
+ # grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2,
+ # but the objcopy's (faulty) test fails if -fstack-protector is default.
+ # create a cache telling configure that objcopy is ok, and add -C to econf
+ # to make use of the cache.
+ #
+ # CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails.
+ # STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites
+ # -fno-stack-protector detected by configure, removed from netboot's emake.
+ use custom-cflags || unset CFLAGS
+
+ tc-ld-disable-gold #439082 #466536 #526348
+
+ export grub_cv_prog_objcopy_absolute=yes #79734
+ use static && append-ldflags -static
+
+ if use amd64 && use static ; then
+ if [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] ; then
+ eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This"
+ eerror "is specifically intended for building the tarballs for the"
+ eerror "grub-static package via USE='static -ncurses'."
+ eerror "All bets are now off."
+ fi
+ fi
+
+ multijob_init
+
+ # build the net-bootable grub first, but only if "netboot" is set
+ if use netboot ; then
+ (
+ multijob_child_init
+ mkdir -p "${WORKDIR}"/netboot
+ pushd "${WORKDIR}"/netboot >/dev/null
+ ECONF_SOURCE=${S} \
+ econf \
+ --libdir=/lib \
+ --datadir=/usr/lib/grub \
+ --exec-prefix=/ \
+ --disable-auto-linux-mem-opt \
+ --enable-diskless \
+ --enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \
+ --enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \
+ --enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \
+ --enable-{tulip,via-rhine,w89c840}
+ popd >/dev/null
+ ) &
+ multijob_post_fork
+ fi
+
+ # Now build the regular grub
+ # Note that FFS and UFS2 support are broken for now - stage1_5 files too big
+ econf \
+ --libdir=/lib \
+ --datadir=/usr/lib/grub \
+ --exec-prefix=/ \
+ --disable-auto-linux-mem-opt \
+ $(use_with ncurses curses)
+
+ # sanity check due to common failure
+ use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found"
+
+ multijob_finish
+}
+
+src_compile() {
+ use netboot && emake -C "${WORKDIR}"/netboot w89c840_o_CFLAGS="-O"
+ emake
+}
+
+src_test() {
+ # non-default block size also give false pass/fails.
+ unset BLOCK_SIZE
+ emake -j1 check
+}
+
+src_install() {
+ default
+ if use netboot ; then
+ exeinto /usr/lib/grub/${CHOST}
+ doexe "${WORKDIR}"/netboot/stage2/{nbgrub,pxegrub}
+ newexe "${WORKDIR}"/netboot/stage2/stage2 stage2.netboot
+ fi
+
+ pax-mark -m "${D}"/sbin/grub #330745
+
+ newdoc docs/menu.lst grub.conf.sample
+ dodoc "${FILESDIR}"/grub.conf.gentoo
+
+ [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] && \
+ mv "${D}"/usr/share/doc/{${PF},grub-static-${PF/grub-}}
+
+ insinto /usr/share/grub
+ doins "${DISTDIR}"/splash.xpm.gz
+}
+
+setup_boot_dir() {
+ local boot_dir=$1
+ local dir=${boot_dir}
+
+ mkdir -p "${dir}"
+ [[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot"
+ dir="${dir}/grub"
+ if [[ ! -e ${dir} ]] ; then
+ mkdir "${dir}" || die
+ fi
+
+ # change menu.lst to grub.conf
+ if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then
+ mv -f "${dir}"/menu.lst "${dir}"/grub.conf
+ ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf"
+ echo
+ fi
+
+ if [[ ! -e ${dir}/menu.lst ]]; then
+ einfo "Linking from new grub.conf name to menu.lst"
+ ln -snf grub.conf "${dir}"/menu.lst
+ fi
+
+ if [[ -e ${dir}/stage2 ]] ; then
+ mv "${dir}"/stage2{,.old}
+ ewarn "*** IMPORTANT NOTE: you must run grub and install"
+ ewarn "the new version's stage1 to your MBR. Until you do,"
+ ewarn "stage1 and stage2 will still be the old version, but"
+ ewarn "later stages will be the new version, which could"
+ ewarn "cause problems such as an unbootable system."
+ ewarn
+ ewarn "This means you must use either grub-install or perform"
+ ewarn "root/setup manually."
+ ewarn
+ ewarn "For more help, see the handbook:"
+ ewarn "http://www.gentoo.org/doc/en/handbook/handbook-${ARCH}.xml?part=1&chap=10#grub-install-auto"
+ echo
+ fi
+
+ einfo "Copying files from /lib/grub and /usr/share/grub to ${dir}"
+ for x in \
+ "${ROOT}"/lib*/grub/*/* \
+ "${ROOT}"/usr/share/grub/* ; do
+ [[ -f ${x} ]] && cp -p "${x}" "${dir}"/
+ done
+
+ if [[ ! -e ${dir}/grub.conf ]] ; then
+ s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo"
+ [[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf
+ [[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf
+ [[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf
+ fi
+
+ # Per bug 218599, we support grub.conf.install for users that want to run a
+ # specific set of Grub setup commands rather than the default ones.
+ grub_config=${dir}/grub.conf.install
+ [[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf
+ if [[ -e ${grub_config} ]] ; then
+ egrep \
+ -v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \
+ "${grub_config}" | \
+ /sbin/grub --batch \
+ --device-map="${dir}"/device.map \
+ > /dev/null
+ fi
+
+ # the grub default commands silently piss themselves if
+ # the default file does not exist ahead of time
+ if [[ ! -e ${dir}/default ]] ; then
+ grub-set-default --root-directory="${boot_dir}" default
+ fi
+ einfo "Grub has been installed to ${boot_dir} successfully."
+}
+
+pkg_postinst() {
+ mount-boot_mount_boot_partition
+
+ if [[ -n ${DONT_MOUNT_BOOT} ]]; then
+ elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply"
+ elog "the following instructions for your /boot!"
+ elog "Neglecting to do so may cause your system to fail to boot!"
+ elog
+ else
+ setup_boot_dir "${ROOT}"/boot
+ # Trailing output because if this is run from pkg_postinst, it gets mixed into
+ # the other output.
+ einfo ""
+ fi
+ elog "To interactively install grub files to another device such as a USB"
+ elog "stick, just run the following and specify the directory as prompted:"
+ elog " emerge --config =${PF}"
+ elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell"
+ elog "grub where to install in a non-interactive way."
+
+ # needs to be after we call setup_boot_dir
+ mount-boot_pkg_postinst
+}
+
+pkg_config() {
+ local dir
+ if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then
+ einfo "Enter the directory where you want to setup grub:"
+ read dir
+ else
+ dir="${GRUB_ALT_INSTALLDIR}"
+ fi
+ setup_boot_dir "${dir}"
+}