summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'sys-boot/raspberrypi-firmware/files')
-rw-r--r--sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt1
-rw-r--r--sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt1
-rw-r--r--sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt (renamed from sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt)58
3 files changed, 22 insertions, 38 deletions
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
deleted file mode 100644
index 39112a2dba6..00000000000
--- a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
+++ /dev/null
@@ -1 +0,0 @@
-ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt
new file mode 100644
index 00000000000..b815bd89db1
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-cmdline.txt
@@ -0,0 +1 @@
+console=serial0,115200 console=tty1 root=ROOTDEV rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt
index 9401530925d..548f4accc25 100644
--- a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-1.20201022-config.txt
@@ -1,4 +1,7 @@
-#from archlinux arm sdcard image
+# For more options and information see
+# http://rpf.io/configtxt
+# Some settings may impact device functionality. See link above for details
+
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
@@ -39,43 +42,24 @@
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
-# for more options see http://elinux.org/RPi_config.txt
+# Uncomment some or all of these to enable the optional hardware interfaces
+#dtparam=i2c_arm=on
+#dtparam=i2s=on
+#dtparam=spi=on
-## Some over clocking settings, govenor already set to ondemand
+# Uncomment this to enable infrared communication.
+#dtoverlay=gpio-ir,gpio_pin=17
+#dtoverlay=gpio-ir-tx,gpio_pin=18
-##None
-#arm_freq=700
-#core_freq=250
-#sdram_freq=400
-#over_voltage=0
+# Additional overlays and parameters are documented /boot/overlays/README
-##Modest
-#arm_freq=800
-#core_freq=300
-#sdram_freq=400
-#over_voltage=0
-
-##Medium
-#arm_freq=900
-#core_freq=333
-#sdram_freq=450
-#over_voltage=2
-
-##High
-#arm_freq=950
-#core_freq=450
-#sdram_freq=450
-#over_voltage=6
-
-##Turbo
-#arm_freq=1000
-#core_freq=500
-#sdram_freq=500
-#over_voltage=6
-
-gpu_mem_512=316
-gpu_mem_256=128
-cma_lwm=16
-cma_hwm=32
-cma_offline_start=16
+# Enable audio (loads snd_bcm2835)
+dtparam=audio=on
+
+[pi4]
+# Enable DRM VC4 V3D driver on top of the dispmanx display stack
+dtoverlay=vc4-fkms-v3d
+max_framebuffers=2
+[all]
+#dtoverlay=vc4-fkms-v3d