From 5543f3de8c9803597c224da00ceee3cdc7f407f4 Mon Sep 17 00:00:00 2001 From: Hans de Graaff Date: Fri, 30 Oct 2020 06:18:16 +0100 Subject: net-analyzer/munin: cleanup Package-Manager: Portage-3.0.8, Repoman-3.0.2 Signed-off-by: Hans de Graaff --- net-analyzer/munin/Manifest | 8 - net-analyzer/munin/munin-2.0.52.ebuild | 419 --------------------------------- net-analyzer/munin/munin-2.0.56.ebuild | 417 -------------------------------- net-analyzer/munin/munin-2.0.61.ebuild | 417 -------------------------------- net-analyzer/munin/munin-2.0.63.ebuild | 417 -------------------------------- 5 files changed, 1678 deletions(-) delete mode 100644 net-analyzer/munin/munin-2.0.52.ebuild delete mode 100644 net-analyzer/munin/munin-2.0.56.ebuild delete mode 100644 net-analyzer/munin/munin-2.0.61.ebuild delete mode 100644 net-analyzer/munin/munin-2.0.63.ebuild diff --git a/net-analyzer/munin/Manifest b/net-analyzer/munin/Manifest index a40b1d5fc744..0bbc42e9d4c9 100644 --- a/net-analyzer/munin/Manifest +++ b/net-analyzer/munin/Manifest @@ -1,13 +1,5 @@ -DIST munin-2.0.52-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 -DIST munin-2.0.52.tar.gz 2266820 BLAKE2B 41233cd28ce4d682dfd47895061426404540c6b1c65798609a2d509d39ad5359b22087027662e7c03848e5676815843c34d078b782e3d0ab3a6a29b6a22e058b SHA512 7439ea10006a94227b71328d06411378f6855f23f17815a433b3a1c40ea23da5a25a366d48f911b9cfdc43c4b98f3bb9777b67db2b894441eb8941e84ede379c -DIST munin-2.0.56-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 -DIST munin-2.0.56.tar.gz 2271203 BLAKE2B f3df227b905ab794e2253637d367819eff2625f9e0f2355d23916b033b3b23d14bb64a78bf6a334f0c7a1859e60c227d1f754a2689bf291cc5f43a46986d35fe SHA512 111b9b8d88474f480eac1e304a92a52c2295d72a1c6709bb2942ff6ee0ba26a56d25dc5d0cf08ddb98a23d6d9693ad0cddb2185e10df83d553655d017d102b1d DIST munin-2.0.59-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 DIST munin-2.0.59.tar.gz 2276011 BLAKE2B 0681cd838daaa056418258d473825642e2aa6b7a3ac7a435859033a467351145be73df327d3149b46c53f5a04c602bea57bc5af428cafb7b5bf1e9c780915ddf SHA512 5597db797f7a0de3581a17be13b079a3fd1e50903014d67d81a262e921fdfca84eee8ec65e3927438db0e01525d16faaabc7e3f7d4cad1a73e7e14002b10478f -DIST munin-2.0.61-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 -DIST munin-2.0.61.tar.gz 2254571 BLAKE2B e73fb6fc4f71c8d56a7e8a05852f699c94a7cf321b8034ad31ccbd06a37a602e6d312c0079fcb31afc5489a265a35a68c037743e01471ca950223d5cb6757b64 SHA512 ea6ae5a7f812985e0179dc2fe2f21136ecf6152ec2adf48d53e4fa19cfc14e74befe56c77a18f27ba966c12034a4fea442d5d1498a7cfe57ed052d332c199019 -DIST munin-2.0.63-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 -DIST munin-2.0.63.tar.gz 2254548 BLAKE2B 5e0aa63222706a1e23bcb2af98437ee8cc3f09cdf833a6546ea40cf7307728518d5d696bd500105f85139753bc17a26dddfb202a661d35a7046ffc55b5b9ef02 SHA512 c28d2bedda8abb8787e1ba40ec80961d1304c903e9e608e30ed7903210169f258f9c062fc97d89932ddd7aabefa4360495d19535520741911c489c9c3c2e76fe DIST munin-2.0.64-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 DIST munin-2.0.64.tar.gz 2256519 BLAKE2B 6a48327672ab7cf20be7a47d489467d0b888e00c01ca0ce8b0bc47a03b63087cf61de4aaf8ae0f18d8e5ef95c49f85092d719ae7de6fe51bcb5e60d138caa519 SHA512 d5f8fb04a601b053844b04850416f09b9f682b83298e35b973ee495cc60477720dc0483f73809db5ca24ba6b9fa1520f026a3f187db01b0c946cce756e4e401f DIST munin-2.0.65-gentoo-1.tar.xz 3980 BLAKE2B 5aae9c29befa761f797d362c90d810051a7f3a5dc8250776ab6ae1659197d795dfb87274db66ff0a3deb4e10e14ced5b3765551a3f29357c436968a848f450ea SHA512 b21d6590bb9e1da127066a06818f1f3157362762f80526e2231b926956959e62af575f38235f72326376dc21bba63f9767efa379f1f2558ca9b20ddf5395e851 diff --git a/net-analyzer/munin/munin-2.0.52.ebuild b/net-analyzer/munin/munin-2.0.52.ebuild deleted file mode 100644 index 56f3cf00bae6..000000000000 --- a/net-analyzer/munin/munin-2.0.52.ebuild +++ /dev/null @@ -1,419 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 - -PATCHSET=1 - -inherit user java-pkg-opt-2 systemd - -MY_P=${P/_/-} - -DESCRIPTION="Munin Server Monitoring Tool" -HOMEPAGE="http://munin-monitoring.org/" -SRC_URI=" - https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz - https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ppc x86" -IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2" -REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )" -RESTRICT="!test? ( test )" - -# Upstream's listing of required modules is NOT correct! -# Some of the postgres plugins use DBD::Pg, while others call psql directly. -# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly. -# We replace the original ipmi plugins with the freeipmi_ plugin which at least works. -DEPEND_COM=" - dev-lang/perl:=[berkdb] - dev-perl/DBI - dev-perl/Date-Manip - dev-perl/File-Copy-Recursive - dev-perl/List-MoreUtils - dev-perl/Log-Log4perl - dev-perl/Net-CIDR - dev-perl/Net-DNS - dev-perl/Net-Netmask - dev-perl/Net-SNMP - dev-perl/Net-Server[ipv6(-)?] - virtual/perl-Digest-MD5 - virtual/perl-Getopt-Long - virtual/perl-MIME-Base64 - virtual/perl-Storable - virtual/perl-Text-Balanced - virtual/perl-Time-HiRes - apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] ) - asterisk? ( dev-perl/Net-Telnet ) - cgi? ( - dev-perl/FCGI - dev-perl/CGI-Fast - ) - dhcpd? ( - >=net-misc/dhcp-3[server] - dev-perl/Net-IP - dev-perl/HTTP-Date - ) - doc? ( dev-python/sphinx ) - http? ( dev-perl/libwww-perl ) - irc? ( dev-perl/Net-IRC ) - ldap? ( dev-perl/perl-ldap ) - kernel_linux? ( sys-process/procps ) - memcached? ( dev-perl/Cache-Memcached ) - mysql? ( - virtual/mysql - dev-perl/Cache-Cache - dev-perl/DBD-mysql - ) - postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* ) - ssl? ( dev-perl/Net-SSLeay ) - syslog? ( virtual/perl-Sys-Syslog ) - !minimal? ( - dev-perl/HTML-Template - dev-perl/IO-Socket-INET6 - dev-perl/URI - >=net-analyzer/rrdtool-1.3[graph,perl] - virtual/ssh - ) - " - -# Keep this seperate, as previous versions have had other deps here -DEPEND="${DEPEND_COM} - dev-perl/Module-Build - java? ( >=virtual/jdk-1.5 ) - test? ( - dev-perl/Test-Deep - dev-perl/Test-Exception - dev-perl/Test-LongString - dev-perl/Test-Differences - dev-perl/Test-MockModule - dev-perl/Test-MockObject - dev-perl/File-Slurp - dev-perl/IO-stringy - dev-perl/IO-Socket-INET6 - )" -RDEPEND="${DEPEND_COM} - virtual/awk - ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 ) - java? ( - >=virtual/jre-1.5 - || ( net-analyzer/netcat net-analyzer/openbsd-netcat ) - ) - !minimal? ( - virtual/cron - media-fonts/dejavu - ) - selinux? ( sec-policy/selinux-munin ) - ! RELEASE || die - - eapply "${WORKDIR}"/patches/*.patch - - eapply_user - - java-pkg-opt-2_src_prepare -} - -src_configure() { - local cgidir='$(DESTDIR)/usr/libexec/munin/cgi' - use cgi || cgidir="${T}/useless/cgi-bin" - - local cgiuser=$(usex apache2 apache munin) - - cat >> "${S}"/Makefile.config <<- EOF - PREFIX=\$(DESTDIR)/usr - CONFDIR=\$(DESTDIR)/etc/munin - DOCDIR=${T}/useless/doc - MANDIR=\$(PREFIX)/share/man - LIBDIR=\$(PREFIX)/libexec/munin - HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin - CGIDIR=${cgidir} - CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi - CGIUSER=${cgiuser} - DBDIR=\$(DESTDIR)/var/lib/munin - DBDIRNODE=\$(DESTDIR)/var/lib/munin-node - SPOOLDIR=\$(DESTDIR)/var/spool/munin-async - LOGDIR=\$(DESTDIR)/var/log/munin - PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2) - JCVALID=$(usex java yes no) - STATEDIR=\$(DESTDIR)/run/munin - EOF -} - -# parallel make and install need to be fixed before, and I haven't -# gotten around to do so yet. -src_compile() { - emake -j1 - use doc && emake -C doc html -} - -src_test() { - if [[ ${EUID} == 0 ]]; then - eerror "You cannot run tests as root." - eerror "Please enable FEATURES=userpriv before proceeding." - return 1 - fi - - local testtargets="test-common test-node test-plugins" - use minimal || testtargets+=" test-master" - - LC_ALL=C emake -j1 ${testtargets} -} - -src_install() { - local dirs=" - /var/log/munin - /var/lib/munin/plugin-state - /var/lib/munin-node/plugin-state - /var/www/localhost/htdocs/munin - /etc/munin/plugin-conf.d - /etc/munin/plugins" - use minimal || dirs+=" /etc/munin/munin-conf.d/" - - keepdir ${dirs} - fowners munin:munin ${dirs} - - # parallel install doesn't work and it's also pointless to have this - # run in parallel for now (because it uses internal loops). - emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install) - - # we remove /run from the install, as it's not the package's to deal - # with. - rm -rf "${D}"/run || die - - # remove the plugins for non-Gentoo package managers; use -f so that - # it doesn't fail when installing on non-Linux platforms. - rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die - - insinto /etc/munin/plugin-conf.d/ - newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node - - newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node - newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node - - newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd - - dodir /usr/lib/tmpfiles.d - cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF - d /run/munin 0700 munin munin - - - EOF - - systemd_dounit "${FILESDIR}"/munin-async.service - systemd_dounit "${FILESDIR}"/munin-graph.{service,socket} - systemd_dounit "${FILESDIR}"/munin-html.{service,socket} - systemd_dounit "${FILESDIR}"/munin-node.service - - cat >> "${T}"/munin.env <<- EOF - CONFIG_PROTECT=/var/spool/munin-async/.ssh - EOF - newenvd "${T}"/munin.env 50munin - - dodoc README ChangeLog INSTALL - if use doc; then - cd "${S}"/doc/_build/html || die - docinto html - dodoc -r * - cd "${S}" || die - fi - - dodir /etc/logrotate.d/ - sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \ - "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin - - dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_ - - if use syslog; then - sed -i -e '/log_file/s| .*| Sys::Syslog|' \ - "${D}"/etc/munin/munin-node.conf || die - fi - - # Use a simpler pid file to avoid trouble with /run in tmpfs. The - # munin-node service is ran as user root, and only later drops - # privileges. - sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \ - "${D}"/etc/munin/munin-node.conf || die - - keepdir /var/spool/munin-async/.ssh - touch "${D}"/var/spool/munin-async/.ssh/authorized_keys - fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}} - fperms 0750 /var/spool/munin-async{,/.ssh} - fperms 0600 /var/spool/munin-async/.ssh/authorized_keys - - if use minimal; then - # This requires the presence of munin-update, which is part of - # the non-minimal install... - rm "${D}"/usr/libexec/munin/plugins/munin_stats - else - # remove font files so that we don't have to keep them around - rm "${D}"/usr/libexec/${PN}/*.ttf || die - - if use cgi; then - sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die - - keepdir /var/cache/munin-cgi - touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log - fowners $(usex apache2 apache munin) \ - /var/cache/munin-cgi \ - /var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - insinto /etc/apache2/vhosts.d - newins "${FILESDIR}"/munin.apache.include munin.include - newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include - fi - else - sed \ - -e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \ - -i "${D}"/etc/munin/munin.conf || die - fi - - keepdir /var/lib/munin/.ssh - cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF - IdentityFile /var/lib/munin/.ssh/id_ecdsa - IdentityFile /var/lib/munin/.ssh/id_rsa - EOF - - fowners munin:munin /var/lib/munin/.ssh/{,config} - fperms go-rwx /var/lib/munin/.ssh/{,config} - - dodir /usr/share/${PN} - cat >> "${D}"/usr/share/${PN}/crontab <<- EOF - # Force the shell to bash - SHELL=/bin/bash - # Mail reports to root@, not munin@ - MAILTO=root - - # This runs the munin task every 5 minutes. - */5 * * * * /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #*/1 * * * * /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #*/2 * * * * /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #*/5 * * * * nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #*/15 * * * * nice /usr/libexec/munin/munin-html - EOF - - cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF - # Mail reports to root@, not munin@, only execute one at a time - !mailto(root),serial(true) - - # This runs the munin task every 5 minutes. - @ 5 /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #@ 1 /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #@ 2 /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #@ 5 nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #@ 15 nice /usr/libexec/munin/munin-html - EOF - - # remove .htaccess file - find "${D}" -name .htaccess -delete || die - fi -} - -pkg_config() { - if use minimal; then - einfo "Nothing to do." - return 0 - fi - - einfo "Press enter to install the default crontab for the munin master" - einfo "installation from /usr/share/${PN}/f?crontab" - einfo "If you have a large site, you may wish to customize it." - read - - ebegin "Setting up cron ..." - if has_version sys-process/fcron; then - fcrontab - -u munin < /usr/share/${PN}/fcrontab - else - # dcron is very fussy about syntax - # the following is the only form that works in BOTH dcron and vixie-cron - crontab - -u munin < /usr/share/${PN}/crontab - fi - eend $? - - einfo "Press enter to set up the SSH keys used for SSH transport" - read - - # generate one rsa (for legacy) and one ecdsa (for new systems) - ssh-keygen -t rsa \ - -f /var/lib/munin/.ssh/id_rsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - ssh-keygen -t ecdsa \ - -f /var/lib/munin/.ssh/id_ecdsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - chown -R munin:munin /var/lib/munin/.ssh || die - chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die - - einfo "Your public keys are available in " - einfo " /var/lib/munin/.ssh/id_rsa.pub" - einfo " /var/lib/munin/.ssh/id_ecdsa.pub" - einfo "and follows for convenience" - echo - cat /var/lib/munin/.ssh/id_*.pub -} - -pkg_postinst() { - elog "Please follow the munin documentation to set up the plugins you" - elog "need, afterwards start munin-node." - elog "" - elog "To make use of munin-async, make sure to set up the corresponding" - elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys" - elog "" - if ! use minimal; then - elog "Please run" - elog " emerge --config net-analyzer/munin" - elog "to automatically configure munin's cronjobs as well as generate" - elog "passwordless SSH keys to be used with munin-async." - fi - elog "" - elog "Further information about setting up Munin in Gentoo can be found" - elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin" - - if use cgi; then - chown $(usex apache2 apache munin) \ - "${ROOT}"/var/cache/munin-cgi \ - "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include" - elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual" - elog "host you want it to be served." - elog "If you want to enable CGI-based HTML as well, you have to add to" - elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI." - else - elog "Effective CGI support has just been added in 2.0.7-r6." - elog "Documentation on how to use it is still sparse." - fi - fi - - # we create this here as we don't want Portage to check /run - # symlinks but we still need this to be present before the reboot. - if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then - mkdir "${ROOT}"/run/munin - chown munin:munin "${ROOT}"/run/munin - chmod 0700 "${ROOT}"/run/munin - fi -} diff --git a/net-analyzer/munin/munin-2.0.56.ebuild b/net-analyzer/munin/munin-2.0.56.ebuild deleted file mode 100644 index 500c7e3caf59..000000000000 --- a/net-analyzer/munin/munin-2.0.56.ebuild +++ /dev/null @@ -1,417 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 - -PATCHSET=1 - -inherit java-pkg-opt-2 systemd - -MY_P=${P/_/-} - -DESCRIPTION="Munin Server Monitoring Tool" -HOMEPAGE="http://munin-monitoring.org/" -SRC_URI=" - https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz - https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 ~arm ~ppc x86" -IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2" -REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )" -RESTRICT="!test? ( test )" - -# Upstream's listing of required modules is NOT correct! -# Some of the postgres plugins use DBD::Pg, while others call psql directly. -# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly. -# We replace the original ipmi plugins with the freeipmi_ plugin which at least works. -DEPEND_COM=" - acct-user/munin - acct-user/munin-async - acct-group/munin - dev-lang/perl:=[berkdb] - dev-perl/DBI - dev-perl/Date-Manip - dev-perl/File-Copy-Recursive - dev-perl/List-MoreUtils - dev-perl/Log-Log4perl - dev-perl/Net-CIDR - dev-perl/Net-DNS - dev-perl/Net-Netmask - dev-perl/Net-SNMP - dev-perl/Net-Server[ipv6(-)?] - virtual/perl-Digest-MD5 - virtual/perl-Getopt-Long - virtual/perl-MIME-Base64 - virtual/perl-Storable - virtual/perl-Text-Balanced - virtual/perl-Time-HiRes - apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] ) - asterisk? ( dev-perl/Net-Telnet ) - cgi? ( - dev-perl/FCGI - dev-perl/CGI-Fast - ) - dhcpd? ( - >=net-misc/dhcp-3[server] - dev-perl/Net-IP - dev-perl/HTTP-Date - ) - doc? ( dev-python/sphinx ) - http? ( dev-perl/libwww-perl ) - irc? ( dev-perl/Net-IRC ) - ldap? ( dev-perl/perl-ldap ) - kernel_linux? ( sys-process/procps ) - memcached? ( dev-perl/Cache-Memcached ) - mysql? ( - virtual/mysql - dev-perl/Cache-Cache - dev-perl/DBD-mysql - ) - postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* ) - ssl? ( dev-perl/Net-SSLeay ) - syslog? ( virtual/perl-Sys-Syslog ) - !minimal? ( - dev-perl/HTML-Template - dev-perl/IO-Socket-INET6 - dev-perl/URI - >=net-analyzer/rrdtool-1.3[graph,perl] - virtual/ssh - ) - " - -# Keep this seperate, as previous versions have had other deps here -DEPEND="${DEPEND_COM} - dev-perl/Module-Build - java? ( >=virtual/jdk-1.5 ) - test? ( - dev-perl/Test-Deep - dev-perl/Test-Exception - dev-perl/Test-LongString - dev-perl/Test-Differences - dev-perl/Test-MockModule - dev-perl/Test-MockObject - dev-perl/File-Slurp - dev-perl/IO-stringy - dev-perl/IO-Socket-INET6 - )" -RDEPEND="${DEPEND_COM} - virtual/awk - ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 ) - java? ( - >=virtual/jre-1.5 - || ( net-analyzer/netcat net-analyzer/openbsd-netcat ) - ) - !minimal? ( - virtual/cron - media-fonts/dejavu - ) - selinux? ( sec-policy/selinux-munin )" - -S="${WORKDIR}/${MY_P}" - -pkg_setup() { - java-pkg-opt-2_pkg_setup -} - -src_prepare() { - echo ${PV} > RELEASE || die - - eapply "${WORKDIR}"/patches/*.patch - - eapply_user - - java-pkg-opt-2_src_prepare -} - -src_configure() { - local cgidir='$(DESTDIR)/usr/libexec/munin/cgi' - use cgi || cgidir="${T}/useless/cgi-bin" - - local cgiuser=$(usex apache2 apache munin) - - cat >> "${S}"/Makefile.config <<- EOF - PREFIX=\$(DESTDIR)/usr - CONFDIR=\$(DESTDIR)/etc/munin - DOCDIR=${T}/useless/doc - MANDIR=\$(PREFIX)/share/man - LIBDIR=\$(PREFIX)/libexec/munin - HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin - CGIDIR=${cgidir} - CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi - CGIUSER=${cgiuser} - DBDIR=\$(DESTDIR)/var/lib/munin - DBDIRNODE=\$(DESTDIR)/var/lib/munin-node - SPOOLDIR=\$(DESTDIR)/var/spool/munin-async - LOGDIR=\$(DESTDIR)/var/log/munin - PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2) - JCVALID=$(usex java yes no) - STATEDIR=\$(DESTDIR)/run/munin - EOF -} - -# parallel make and install need to be fixed before, and I haven't -# gotten around to do so yet. -src_compile() { - emake -j1 - use doc && emake -C doc html -} - -src_test() { - if [[ ${EUID} == 0 ]]; then - eerror "You cannot run tests as root." - eerror "Please enable FEATURES=userpriv before proceeding." - return 1 - fi - - local testtargets="test-common test-node test-plugins" - use minimal || testtargets+=" test-master" - - LC_ALL=C emake -j1 ${testtargets} -} - -src_install() { - local dirs=" - /var/log/munin - /var/lib/munin/plugin-state - /var/lib/munin-node/plugin-state - /var/www/localhost/htdocs/munin - /etc/munin/plugin-conf.d - /etc/munin/plugins" - use minimal || dirs+=" /etc/munin/munin-conf.d/" - - keepdir ${dirs} - fowners munin:munin ${dirs} - - # parallel install doesn't work and it's also pointless to have this - # run in parallel for now (because it uses internal loops). - emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install) - - # we remove /run from the install, as it's not the package's to deal - # with. - rm -rf "${D}"/run || die - - # remove the plugins for non-Gentoo package managers; use -f so that - # it doesn't fail when installing on non-Linux platforms. - rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die - - insinto /etc/munin/plugin-conf.d/ - newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node - - newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node - newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node - - newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd - - dodir /usr/lib/tmpfiles.d - cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF - d /run/munin 0700 munin munin - - - EOF - - systemd_dounit "${FILESDIR}"/munin-async.service - systemd_dounit "${FILESDIR}"/munin-graph.{service,socket} - systemd_dounit "${FILESDIR}"/munin-html.{service,socket} - systemd_dounit "${FILESDIR}"/munin-node.service - - cat >> "${T}"/munin.env <<- EOF - CONFIG_PROTECT=/var/spool/munin-async/.ssh - EOF - newenvd "${T}"/munin.env 50munin - - dodoc README ChangeLog INSTALL - if use doc; then - cd "${S}"/doc/_build/html || die - docinto html - dodoc -r * - cd "${S}" || die - fi - - dodir /etc/logrotate.d/ - sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \ - "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin - - dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_ - - if use syslog; then - sed -i -e '/log_file/s| .*| Sys::Syslog|' \ - "${D}"/etc/munin/munin-node.conf || die - fi - - # Use a simpler pid file to avoid trouble with /run in tmpfs. The - # munin-node service is ran as user root, and only later drops - # privileges. - sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \ - "${D}"/etc/munin/munin-node.conf || die - - keepdir /var/spool/munin-async/.ssh - touch "${D}"/var/spool/munin-async/.ssh/authorized_keys - fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}} - fperms 0750 /var/spool/munin-async{,/.ssh} - fperms 0600 /var/spool/munin-async/.ssh/authorized_keys - - if use minimal; then - # This requires the presence of munin-update, which is part of - # the non-minimal install... - rm "${D}"/usr/libexec/munin/plugins/munin_stats - else - # remove font files so that we don't have to keep them around - rm "${D}"/usr/libexec/${PN}/*.ttf || die - - if use cgi; then - sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die - - keepdir /var/cache/munin-cgi - touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log - fowners $(usex apache2 apache munin) \ - /var/cache/munin-cgi \ - /var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - insinto /etc/apache2/vhosts.d - newins "${FILESDIR}"/munin.apache.include munin.include - newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include - fi - else - sed \ - -e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \ - -i "${D}"/etc/munin/munin.conf || die - fi - - keepdir /var/lib/munin/.ssh - cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF - IdentityFile /var/lib/munin/.ssh/id_ecdsa - IdentityFile /var/lib/munin/.ssh/id_rsa - EOF - - fowners munin:munin /var/lib/munin/.ssh/{,config} - fperms go-rwx /var/lib/munin/.ssh/{,config} - - dodir /usr/share/${PN} - cat >> "${D}"/usr/share/${PN}/crontab <<- EOF - # Force the shell to bash - SHELL=/bin/bash - # Mail reports to root@, not munin@ - MAILTO=root - - # This runs the munin task every 5 minutes. - */5 * * * * /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #*/1 * * * * /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #*/2 * * * * /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #*/5 * * * * nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #*/15 * * * * nice /usr/libexec/munin/munin-html - EOF - - cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF - # Mail reports to root@, not munin@, only execute one at a time - !mailto(root),serial(true) - - # This runs the munin task every 5 minutes. - @ 5 /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #@ 1 /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #@ 2 /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #@ 5 nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #@ 15 nice /usr/libexec/munin/munin-html - EOF - - # remove .htaccess file - find "${D}" -name .htaccess -delete || die - fi -} - -pkg_config() { - if use minimal; then - einfo "Nothing to do." - return 0 - fi - - einfo "Press enter to install the default crontab for the munin master" - einfo "installation from /usr/share/${PN}/f?crontab" - einfo "If you have a large site, you may wish to customize it." - read - - ebegin "Setting up cron ..." - if has_version sys-process/fcron; then - fcrontab - -u munin < /usr/share/${PN}/fcrontab - else - # dcron is very fussy about syntax - # the following is the only form that works in BOTH dcron and vixie-cron - crontab - -u munin < /usr/share/${PN}/crontab - fi - eend $? - - einfo "Press enter to set up the SSH keys used for SSH transport" - read - - # generate one rsa (for legacy) and one ecdsa (for new systems) - ssh-keygen -t rsa \ - -f /var/lib/munin/.ssh/id_rsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - ssh-keygen -t ecdsa \ - -f /var/lib/munin/.ssh/id_ecdsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - chown -R munin:munin /var/lib/munin/.ssh || die - chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die - - einfo "Your public keys are available in " - einfo " /var/lib/munin/.ssh/id_rsa.pub" - einfo " /var/lib/munin/.ssh/id_ecdsa.pub" - einfo "and follows for convenience" - echo - cat /var/lib/munin/.ssh/id_*.pub -} - -pkg_postinst() { - elog "Please follow the munin documentation to set up the plugins you" - elog "need, afterwards start munin-node." - elog "" - elog "To make use of munin-async, make sure to set up the corresponding" - elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys" - elog "" - if ! use minimal; then - elog "Please run" - elog " emerge --config net-analyzer/munin" - elog "to automatically configure munin's cronjobs as well as generate" - elog "passwordless SSH keys to be used with munin-async." - fi - elog "" - elog "Further information about setting up Munin in Gentoo can be found" - elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin" - - if use cgi; then - chown $(usex apache2 apache munin) \ - "${ROOT}"/var/cache/munin-cgi \ - "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include" - elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual" - elog "host you want it to be served." - elog "If you want to enable CGI-based HTML as well, you have to add to" - elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI." - else - elog "Effective CGI support has just been added in 2.0.7-r6." - elog "Documentation on how to use it is still sparse." - fi - fi - - # we create this here as we don't want Portage to check /run - # symlinks but we still need this to be present before the reboot. - if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then - mkdir "${ROOT}"/run/munin - chown munin:munin "${ROOT}"/run/munin - chmod 0700 "${ROOT}"/run/munin - fi -} diff --git a/net-analyzer/munin/munin-2.0.61.ebuild b/net-analyzer/munin/munin-2.0.61.ebuild deleted file mode 100644 index acaf9f6d9f0c..000000000000 --- a/net-analyzer/munin/munin-2.0.61.ebuild +++ /dev/null @@ -1,417 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 - -PATCHSET=1 - -inherit java-pkg-opt-2 systemd - -MY_P=${P/_/-} - -DESCRIPTION="Munin Server Monitoring Tool" -HOMEPAGE="http://munin-monitoring.org/" -SRC_URI=" - https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz - https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86" -IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2" -REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )" -RESTRICT="!test? ( test )" - -# Upstream's listing of required modules is NOT correct! -# Some of the postgres plugins use DBD::Pg, while others call psql directly. -# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly. -# We replace the original ipmi plugins with the freeipmi_ plugin which at least works. -DEPEND_COM=" - acct-user/munin - acct-user/munin-async - acct-group/munin - dev-lang/perl:=[berkdb] - dev-perl/DBI - dev-perl/Date-Manip - dev-perl/File-Copy-Recursive - dev-perl/List-MoreUtils - dev-perl/Log-Log4perl - dev-perl/Net-CIDR - dev-perl/Net-DNS - dev-perl/Net-Netmask - dev-perl/Net-SNMP - dev-perl/Net-Server[ipv6(-)?] - virtual/perl-Digest-MD5 - virtual/perl-Getopt-Long - virtual/perl-MIME-Base64 - virtual/perl-Storable - virtual/perl-Text-Balanced - virtual/perl-Time-HiRes - apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] ) - asterisk? ( dev-perl/Net-Telnet ) - cgi? ( - dev-perl/FCGI - dev-perl/CGI-Fast - ) - dhcpd? ( - >=net-misc/dhcp-3[server] - dev-perl/Net-IP - dev-perl/HTTP-Date - ) - doc? ( dev-python/sphinx ) - http? ( dev-perl/libwww-perl ) - irc? ( dev-perl/Net-IRC ) - ldap? ( dev-perl/perl-ldap ) - kernel_linux? ( sys-process/procps ) - memcached? ( dev-perl/Cache-Memcached ) - mysql? ( - virtual/mysql - dev-perl/Cache-Cache - dev-perl/DBD-mysql - ) - postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* ) - ssl? ( dev-perl/Net-SSLeay ) - syslog? ( virtual/perl-Sys-Syslog ) - !minimal? ( - dev-perl/HTML-Template - dev-perl/IO-Socket-INET6 - dev-perl/URI - >=net-analyzer/rrdtool-1.3[graph,perl] - virtual/ssh - ) - " - -# Keep this seperate, as previous versions have had other deps here -DEPEND="${DEPEND_COM} - dev-perl/Module-Build - java? ( >=virtual/jdk-1.5 ) - test? ( - dev-perl/Test-Deep - dev-perl/Test-Exception - dev-perl/Test-LongString - dev-perl/Test-Differences - dev-perl/Test-MockModule - dev-perl/Test-MockObject - dev-perl/File-Slurp - dev-perl/IO-stringy - dev-perl/IO-Socket-INET6 - )" -RDEPEND="${DEPEND_COM} - virtual/awk - ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 ) - java? ( - >=virtual/jre-1.5 - || ( net-analyzer/netcat net-analyzer/openbsd-netcat ) - ) - !minimal? ( - virtual/cron - media-fonts/dejavu - ) - selinux? ( sec-policy/selinux-munin )" - -S="${WORKDIR}/${MY_P}" - -pkg_setup() { - java-pkg-opt-2_pkg_setup -} - -src_prepare() { - echo ${PV} > RELEASE || die - - eapply "${WORKDIR}"/patches/*.patch - - eapply_user - - java-pkg-opt-2_src_prepare -} - -src_configure() { - local cgidir='$(DESTDIR)/usr/libexec/munin/cgi' - use cgi || cgidir="${T}/useless/cgi-bin" - - local cgiuser=$(usex apache2 apache munin) - - cat >> "${S}"/Makefile.config <<- EOF - PREFIX=\$(DESTDIR)/usr - CONFDIR=\$(DESTDIR)/etc/munin - DOCDIR=${T}/useless/doc - MANDIR=\$(PREFIX)/share/man - LIBDIR=\$(PREFIX)/libexec/munin - HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin - CGIDIR=${cgidir} - CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi - CGIUSER=${cgiuser} - DBDIR=\$(DESTDIR)/var/lib/munin - DBDIRNODE=\$(DESTDIR)/var/lib/munin-node - SPOOLDIR=\$(DESTDIR)/var/spool/munin-async - LOGDIR=\$(DESTDIR)/var/log/munin - PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2) - JCVALID=$(usex java yes no) - STATEDIR=\$(DESTDIR)/run/munin - EOF -} - -# parallel make and install need to be fixed before, and I haven't -# gotten around to do so yet. -src_compile() { - emake -j1 - use doc && emake -C doc html -} - -src_test() { - if [[ ${EUID} == 0 ]]; then - eerror "You cannot run tests as root." - eerror "Please enable FEATURES=userpriv before proceeding." - return 1 - fi - - local testtargets="test-common test-node test-plugins" - use minimal || testtargets+=" test-master" - - LC_ALL=C emake -j1 ${testtargets} -} - -src_install() { - local dirs=" - /var/log/munin - /var/lib/munin/plugin-state - /var/lib/munin-node/plugin-state - /var/www/localhost/htdocs/munin - /etc/munin/plugin-conf.d - /etc/munin/plugins" - use minimal || dirs+=" /etc/munin/munin-conf.d/" - - keepdir ${dirs} - fowners munin:munin ${dirs} - - # parallel install doesn't work and it's also pointless to have this - # run in parallel for now (because it uses internal loops). - emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install) - - # we remove /run from the install, as it's not the package's to deal - # with. - rm -rf "${D}"/run || die - - # remove the plugins for non-Gentoo package managers; use -f so that - # it doesn't fail when installing on non-Linux platforms. - rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die - - insinto /etc/munin/plugin-conf.d/ - newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node - - newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node - newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node - - newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd - - dodir /usr/lib/tmpfiles.d - cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF - d /run/munin 0700 munin munin - - - EOF - - systemd_dounit "${FILESDIR}"/munin-async.service - systemd_dounit "${FILESDIR}"/munin-graph.{service,socket} - systemd_dounit "${FILESDIR}"/munin-html.{service,socket} - systemd_dounit "${FILESDIR}"/munin-node.service - - cat >> "${T}"/munin.env <<- EOF - CONFIG_PROTECT=/var/spool/munin-async/.ssh - EOF - newenvd "${T}"/munin.env 50munin - - dodoc README ChangeLog INSTALL - if use doc; then - cd "${S}"/doc/_build/html || die - docinto html - dodoc -r * - cd "${S}" || die - fi - - dodir /etc/logrotate.d/ - sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \ - "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin - - dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_ - - if use syslog; then - sed -i -e '/log_file/s| .*| Sys::Syslog|' \ - "${D}"/etc/munin/munin-node.conf || die - fi - - # Use a simpler pid file to avoid trouble with /run in tmpfs. The - # munin-node service is ran as user root, and only later drops - # privileges. - sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \ - "${D}"/etc/munin/munin-node.conf || die - - keepdir /var/spool/munin-async/.ssh - touch "${D}"/var/spool/munin-async/.ssh/authorized_keys - fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}} - fperms 0750 /var/spool/munin-async{,/.ssh} - fperms 0600 /var/spool/munin-async/.ssh/authorized_keys - - if use minimal; then - # This requires the presence of munin-update, which is part of - # the non-minimal install... - rm "${D}"/usr/libexec/munin/plugins/munin_stats - else - # remove font files so that we don't have to keep them around - rm "${D}"/usr/libexec/${PN}/*.ttf || die - - if use cgi; then - sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die - - keepdir /var/cache/munin-cgi - touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log - fowners $(usex apache2 apache munin) \ - /var/cache/munin-cgi \ - /var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - insinto /etc/apache2/vhosts.d - newins "${FILESDIR}"/munin.apache.include munin.include - newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include - fi - else - sed \ - -e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \ - -i "${D}"/etc/munin/munin.conf || die - fi - - keepdir /var/lib/munin/.ssh - cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF - IdentityFile /var/lib/munin/.ssh/id_ecdsa - IdentityFile /var/lib/munin/.ssh/id_rsa - EOF - - fowners munin:munin /var/lib/munin/.ssh/{,config} - fperms go-rwx /var/lib/munin/.ssh/{,config} - - dodir /usr/share/${PN} - cat >> "${D}"/usr/share/${PN}/crontab <<- EOF - # Force the shell to bash - SHELL=/bin/bash - # Mail reports to root@, not munin@ - MAILTO=root - - # This runs the munin task every 5 minutes. - */5 * * * * /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #*/1 * * * * /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #*/2 * * * * /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #*/5 * * * * nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #*/15 * * * * nice /usr/libexec/munin/munin-html - EOF - - cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF - # Mail reports to root@, not munin@, only execute one at a time - !mailto(root),serial(true) - - # This runs the munin task every 5 minutes. - @ 5 /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #@ 1 /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #@ 2 /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #@ 5 nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #@ 15 nice /usr/libexec/munin/munin-html - EOF - - # remove .htaccess file - find "${D}" -name .htaccess -delete || die - fi -} - -pkg_config() { - if use minimal; then - einfo "Nothing to do." - return 0 - fi - - einfo "Press enter to install the default crontab for the munin master" - einfo "installation from /usr/share/${PN}/f?crontab" - einfo "If you have a large site, you may wish to customize it." - read - - ebegin "Setting up cron ..." - if has_version sys-process/fcron; then - fcrontab - -u munin < /usr/share/${PN}/fcrontab - else - # dcron is very fussy about syntax - # the following is the only form that works in BOTH dcron and vixie-cron - crontab - -u munin < /usr/share/${PN}/crontab - fi - eend $? - - einfo "Press enter to set up the SSH keys used for SSH transport" - read - - # generate one rsa (for legacy) and one ecdsa (for new systems) - ssh-keygen -t rsa \ - -f /var/lib/munin/.ssh/id_rsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - ssh-keygen -t ecdsa \ - -f /var/lib/munin/.ssh/id_ecdsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - chown -R munin:munin /var/lib/munin/.ssh || die - chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die - - einfo "Your public keys are available in " - einfo " /var/lib/munin/.ssh/id_rsa.pub" - einfo " /var/lib/munin/.ssh/id_ecdsa.pub" - einfo "and follows for convenience" - echo - cat /var/lib/munin/.ssh/id_*.pub -} - -pkg_postinst() { - elog "Please follow the munin documentation to set up the plugins you" - elog "need, afterwards start munin-node." - elog "" - elog "To make use of munin-async, make sure to set up the corresponding" - elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys" - elog "" - if ! use minimal; then - elog "Please run" - elog " emerge --config net-analyzer/munin" - elog "to automatically configure munin's cronjobs as well as generate" - elog "passwordless SSH keys to be used with munin-async." - fi - elog "" - elog "Further information about setting up Munin in Gentoo can be found" - elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin" - - if use cgi; then - chown $(usex apache2 apache munin) \ - "${ROOT}"/var/cache/munin-cgi \ - "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include" - elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual" - elog "host you want it to be served." - elog "If you want to enable CGI-based HTML as well, you have to add to" - elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI." - else - elog "Effective CGI support has just been added in 2.0.7-r6." - elog "Documentation on how to use it is still sparse." - fi - fi - - # we create this here as we don't want Portage to check /run - # symlinks but we still need this to be present before the reboot. - if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then - mkdir "${ROOT}"/run/munin - chown munin:munin "${ROOT}"/run/munin - chmod 0700 "${ROOT}"/run/munin - fi -} diff --git a/net-analyzer/munin/munin-2.0.63.ebuild b/net-analyzer/munin/munin-2.0.63.ebuild deleted file mode 100644 index acaf9f6d9f0c..000000000000 --- a/net-analyzer/munin/munin-2.0.63.ebuild +++ /dev/null @@ -1,417 +0,0 @@ -# Copyright 1999-2020 Gentoo Authors -# Distributed under the terms of the GNU General Public License v2 - -EAPI=7 - -PATCHSET=1 - -inherit java-pkg-opt-2 systemd - -MY_P=${P/_/-} - -DESCRIPTION="Munin Server Monitoring Tool" -HOMEPAGE="http://munin-monitoring.org/" -SRC_URI=" - https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz - https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86" -IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2" -REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )" -RESTRICT="!test? ( test )" - -# Upstream's listing of required modules is NOT correct! -# Some of the postgres plugins use DBD::Pg, while others call psql directly. -# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly. -# We replace the original ipmi plugins with the freeipmi_ plugin which at least works. -DEPEND_COM=" - acct-user/munin - acct-user/munin-async - acct-group/munin - dev-lang/perl:=[berkdb] - dev-perl/DBI - dev-perl/Date-Manip - dev-perl/File-Copy-Recursive - dev-perl/List-MoreUtils - dev-perl/Log-Log4perl - dev-perl/Net-CIDR - dev-perl/Net-DNS - dev-perl/Net-Netmask - dev-perl/Net-SNMP - dev-perl/Net-Server[ipv6(-)?] - virtual/perl-Digest-MD5 - virtual/perl-Getopt-Long - virtual/perl-MIME-Base64 - virtual/perl-Storable - virtual/perl-Text-Balanced - virtual/perl-Time-HiRes - apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] ) - asterisk? ( dev-perl/Net-Telnet ) - cgi? ( - dev-perl/FCGI - dev-perl/CGI-Fast - ) - dhcpd? ( - >=net-misc/dhcp-3[server] - dev-perl/Net-IP - dev-perl/HTTP-Date - ) - doc? ( dev-python/sphinx ) - http? ( dev-perl/libwww-perl ) - irc? ( dev-perl/Net-IRC ) - ldap? ( dev-perl/perl-ldap ) - kernel_linux? ( sys-process/procps ) - memcached? ( dev-perl/Cache-Memcached ) - mysql? ( - virtual/mysql - dev-perl/Cache-Cache - dev-perl/DBD-mysql - ) - postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* ) - ssl? ( dev-perl/Net-SSLeay ) - syslog? ( virtual/perl-Sys-Syslog ) - !minimal? ( - dev-perl/HTML-Template - dev-perl/IO-Socket-INET6 - dev-perl/URI - >=net-analyzer/rrdtool-1.3[graph,perl] - virtual/ssh - ) - " - -# Keep this seperate, as previous versions have had other deps here -DEPEND="${DEPEND_COM} - dev-perl/Module-Build - java? ( >=virtual/jdk-1.5 ) - test? ( - dev-perl/Test-Deep - dev-perl/Test-Exception - dev-perl/Test-LongString - dev-perl/Test-Differences - dev-perl/Test-MockModule - dev-perl/Test-MockObject - dev-perl/File-Slurp - dev-perl/IO-stringy - dev-perl/IO-Socket-INET6 - )" -RDEPEND="${DEPEND_COM} - virtual/awk - ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 ) - java? ( - >=virtual/jre-1.5 - || ( net-analyzer/netcat net-analyzer/openbsd-netcat ) - ) - !minimal? ( - virtual/cron - media-fonts/dejavu - ) - selinux? ( sec-policy/selinux-munin )" - -S="${WORKDIR}/${MY_P}" - -pkg_setup() { - java-pkg-opt-2_pkg_setup -} - -src_prepare() { - echo ${PV} > RELEASE || die - - eapply "${WORKDIR}"/patches/*.patch - - eapply_user - - java-pkg-opt-2_src_prepare -} - -src_configure() { - local cgidir='$(DESTDIR)/usr/libexec/munin/cgi' - use cgi || cgidir="${T}/useless/cgi-bin" - - local cgiuser=$(usex apache2 apache munin) - - cat >> "${S}"/Makefile.config <<- EOF - PREFIX=\$(DESTDIR)/usr - CONFDIR=\$(DESTDIR)/etc/munin - DOCDIR=${T}/useless/doc - MANDIR=\$(PREFIX)/share/man - LIBDIR=\$(PREFIX)/libexec/munin - HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin - CGIDIR=${cgidir} - CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi - CGIUSER=${cgiuser} - DBDIR=\$(DESTDIR)/var/lib/munin - DBDIRNODE=\$(DESTDIR)/var/lib/munin-node - SPOOLDIR=\$(DESTDIR)/var/spool/munin-async - LOGDIR=\$(DESTDIR)/var/log/munin - PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2) - JCVALID=$(usex java yes no) - STATEDIR=\$(DESTDIR)/run/munin - EOF -} - -# parallel make and install need to be fixed before, and I haven't -# gotten around to do so yet. -src_compile() { - emake -j1 - use doc && emake -C doc html -} - -src_test() { - if [[ ${EUID} == 0 ]]; then - eerror "You cannot run tests as root." - eerror "Please enable FEATURES=userpriv before proceeding." - return 1 - fi - - local testtargets="test-common test-node test-plugins" - use minimal || testtargets+=" test-master" - - LC_ALL=C emake -j1 ${testtargets} -} - -src_install() { - local dirs=" - /var/log/munin - /var/lib/munin/plugin-state - /var/lib/munin-node/plugin-state - /var/www/localhost/htdocs/munin - /etc/munin/plugin-conf.d - /etc/munin/plugins" - use minimal || dirs+=" /etc/munin/munin-conf.d/" - - keepdir ${dirs} - fowners munin:munin ${dirs} - - # parallel install doesn't work and it's also pointless to have this - # run in parallel for now (because it uses internal loops). - emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install) - - # we remove /run from the install, as it's not the package's to deal - # with. - rm -rf "${D}"/run || die - - # remove the plugins for non-Gentoo package managers; use -f so that - # it doesn't fail when installing on non-Linux platforms. - rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die - - insinto /etc/munin/plugin-conf.d/ - newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node - - newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node - newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node - - newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd - - dodir /usr/lib/tmpfiles.d - cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF - d /run/munin 0700 munin munin - - - EOF - - systemd_dounit "${FILESDIR}"/munin-async.service - systemd_dounit "${FILESDIR}"/munin-graph.{service,socket} - systemd_dounit "${FILESDIR}"/munin-html.{service,socket} - systemd_dounit "${FILESDIR}"/munin-node.service - - cat >> "${T}"/munin.env <<- EOF - CONFIG_PROTECT=/var/spool/munin-async/.ssh - EOF - newenvd "${T}"/munin.env 50munin - - dodoc README ChangeLog INSTALL - if use doc; then - cd "${S}"/doc/_build/html || die - docinto html - dodoc -r * - cd "${S}" || die - fi - - dodir /etc/logrotate.d/ - sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \ - "${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin - - dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_ - - if use syslog; then - sed -i -e '/log_file/s| .*| Sys::Syslog|' \ - "${D}"/etc/munin/munin-node.conf || die - fi - - # Use a simpler pid file to avoid trouble with /run in tmpfs. The - # munin-node service is ran as user root, and only later drops - # privileges. - sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \ - "${D}"/etc/munin/munin-node.conf || die - - keepdir /var/spool/munin-async/.ssh - touch "${D}"/var/spool/munin-async/.ssh/authorized_keys - fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}} - fperms 0750 /var/spool/munin-async{,/.ssh} - fperms 0600 /var/spool/munin-async/.ssh/authorized_keys - - if use minimal; then - # This requires the presence of munin-update, which is part of - # the non-minimal install... - rm "${D}"/usr/libexec/munin/plugins/munin_stats - else - # remove font files so that we don't have to keep them around - rm "${D}"/usr/libexec/${PN}/*.ttf || die - - if use cgi; then - sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die - - keepdir /var/cache/munin-cgi - touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log - fowners $(usex apache2 apache munin) \ - /var/cache/munin-cgi \ - /var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - insinto /etc/apache2/vhosts.d - newins "${FILESDIR}"/munin.apache.include munin.include - newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include - fi - else - sed \ - -e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \ - -i "${D}"/etc/munin/munin.conf || die - fi - - keepdir /var/lib/munin/.ssh - cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF - IdentityFile /var/lib/munin/.ssh/id_ecdsa - IdentityFile /var/lib/munin/.ssh/id_rsa - EOF - - fowners munin:munin /var/lib/munin/.ssh/{,config} - fperms go-rwx /var/lib/munin/.ssh/{,config} - - dodir /usr/share/${PN} - cat >> "${D}"/usr/share/${PN}/crontab <<- EOF - # Force the shell to bash - SHELL=/bin/bash - # Mail reports to root@, not munin@ - MAILTO=root - - # This runs the munin task every 5 minutes. - */5 * * * * /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #*/1 * * * * /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #*/2 * * * * /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #*/5 * * * * nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #*/15 * * * * nice /usr/libexec/munin/munin-html - EOF - - cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF - # Mail reports to root@, not munin@, only execute one at a time - !mailto(root),serial(true) - - # This runs the munin task every 5 minutes. - @ 5 /usr/bin/munin-cron - - # Alternatively, this route works differently - # Update once a minute (for busy sites) - #@ 1 /usr/libexec/munin/munin-update - ## Check for limit excess every 2 minutes - #@ 2 /usr/libexec/munin/munin-limits - ## Update graphs every 5 minutes - #@ 5 nice /usr/libexec/munin/munin-graph - ## Update HTML pages every 15 minutes - #@ 15 nice /usr/libexec/munin/munin-html - EOF - - # remove .htaccess file - find "${D}" -name .htaccess -delete || die - fi -} - -pkg_config() { - if use minimal; then - einfo "Nothing to do." - return 0 - fi - - einfo "Press enter to install the default crontab for the munin master" - einfo "installation from /usr/share/${PN}/f?crontab" - einfo "If you have a large site, you may wish to customize it." - read - - ebegin "Setting up cron ..." - if has_version sys-process/fcron; then - fcrontab - -u munin < /usr/share/${PN}/fcrontab - else - # dcron is very fussy about syntax - # the following is the only form that works in BOTH dcron and vixie-cron - crontab - -u munin < /usr/share/${PN}/crontab - fi - eend $? - - einfo "Press enter to set up the SSH keys used for SSH transport" - read - - # generate one rsa (for legacy) and one ecdsa (for new systems) - ssh-keygen -t rsa \ - -f /var/lib/munin/.ssh/id_rsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - ssh-keygen -t ecdsa \ - -f /var/lib/munin/.ssh/id_ecdsa -N '' \ - -C "created by portage for ${CATEGORY}/${PN}" || die - chown -R munin:munin /var/lib/munin/.ssh || die - chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die - - einfo "Your public keys are available in " - einfo " /var/lib/munin/.ssh/id_rsa.pub" - einfo " /var/lib/munin/.ssh/id_ecdsa.pub" - einfo "and follows for convenience" - echo - cat /var/lib/munin/.ssh/id_*.pub -} - -pkg_postinst() { - elog "Please follow the munin documentation to set up the plugins you" - elog "need, afterwards start munin-node." - elog "" - elog "To make use of munin-async, make sure to set up the corresponding" - elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys" - elog "" - if ! use minimal; then - elog "Please run" - elog " emerge --config net-analyzer/munin" - elog "to automatically configure munin's cronjobs as well as generate" - elog "passwordless SSH keys to be used with munin-async." - fi - elog "" - elog "Further information about setting up Munin in Gentoo can be found" - elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin" - - if use cgi; then - chown $(usex apache2 apache munin) \ - "${ROOT}"/var/cache/munin-cgi \ - "${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log - - if use apache2; then - elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include" - elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual" - elog "host you want it to be served." - elog "If you want to enable CGI-based HTML as well, you have to add to" - elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI." - else - elog "Effective CGI support has just been added in 2.0.7-r6." - elog "Documentation on how to use it is still sparse." - fi - fi - - # we create this here as we don't want Portage to check /run - # symlinks but we still need this to be present before the reboot. - if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then - mkdir "${ROOT}"/run/munin - chown munin:munin "${ROOT}"/run/munin - chmod 0700 "${ROOT}"/run/munin - fi -} -- cgit v1.2.3-65-gdbad