From c838287b737b39c9428b35b70ae841fda891ba6a Mon Sep 17 00:00:00 2001
From: Sam James <sam@gentoo.org>
Date: Wed, 16 Jun 2021 20:06:48 +0100
Subject: net-analyzer/munin: add 'delaycompress' to logrotate files

Closes: https://bugs.gentoo.org/530310
Signed-off-by: Sam James <sam@gentoo.org>
---
 net-analyzer/munin/files/logrotate.d-munin.3 |   3 +
 net-analyzer/munin/munin-2.0.66-r1.ebuild    | 417 +++++++++++++++++++++++++++
 net-analyzer/munin/munin-2.0.66.ebuild       | 417 ---------------------------
 net-analyzer/munin/munin-2.0.67-r1.ebuild    | 417 ---------------------------
 net-analyzer/munin/munin-2.0.67-r2.ebuild    | 417 +++++++++++++++++++++++++++
 5 files changed, 837 insertions(+), 834 deletions(-)
 create mode 100644 net-analyzer/munin/munin-2.0.66-r1.ebuild
 delete mode 100644 net-analyzer/munin/munin-2.0.66.ebuild
 delete mode 100644 net-analyzer/munin/munin-2.0.67-r1.ebuild
 create mode 100644 net-analyzer/munin/munin-2.0.67-r2.ebuild

(limited to 'net-analyzer')

diff --git a/net-analyzer/munin/files/logrotate.d-munin.3 b/net-analyzer/munin/files/logrotate.d-munin.3
index e7e1dda3fc65..2d3b6829762b 100644
--- a/net-analyzer/munin/files/logrotate.d-munin.3
+++ b/net-analyzer/munin/files/logrotate.d-munin.3
@@ -3,6 +3,7 @@
 	missingok
 	rotate 7
 	compress
+	delaycompress
 	copytruncate
 	notifempty
 	create 640 root root
@@ -17,6 +18,7 @@
 	missingok
 	rotate 7
 	compress
+	delaycompress
 	notifempty
 	nocreate
 }
@@ -26,6 +28,7 @@
 	missingok
 	rotate 7
 	compress
+	delaycompress
 	notifempty
 	create 640 @CGIUSER@
 }
diff --git a/net-analyzer/munin/munin-2.0.66-r1.ebuild b/net-analyzer/munin/munin-2.0.66-r1.ebuild
new file mode 100644
index 000000000000..7a5621b5deb7
--- /dev/null
+++ b/net-analyzer/munin/munin-2.0.66-r1.ebuild
@@ -0,0 +1,417 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PATCHSET=1
+
+inherit java-pkg-opt-2 systemd
+
+MY_P=${P/_/-}
+
+DESCRIPTION="Munin Server Monitoring Tool"
+HOMEPAGE="http://munin-monitoring.org/"
+SRC_URI="
+	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
+	https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 ~arm ~arm64 ppc ~ppc64 x86"
+IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
+REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
+RESTRICT="!test? ( test )"
+
+# Upstream's listing of required modules is NOT correct!
+# Some of the postgres plugins use DBD::Pg, while others call psql directly.
+# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
+# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
+DEPEND_COM="
+	acct-user/munin
+	acct-user/munin-async
+	acct-group/munin
+	dev-lang/perl:=[berkdb]
+	dev-perl/DBI
+	dev-perl/Date-Manip
+	dev-perl/File-Copy-Recursive
+	dev-perl/List-MoreUtils
+	dev-perl/Log-Log4perl
+	dev-perl/Net-CIDR
+	dev-perl/Net-DNS
+	dev-perl/Net-Netmask
+	dev-perl/Net-SNMP
+	dev-perl/Net-Server[ipv6(-)?]
+	virtual/perl-Digest-MD5
+	virtual/perl-Getopt-Long
+	virtual/perl-MIME-Base64
+	virtual/perl-Storable
+	virtual/perl-Text-Balanced
+	virtual/perl-Time-HiRes
+	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
+	asterisk? ( dev-perl/Net-Telnet )
+	cgi? (
+		dev-perl/FCGI
+		dev-perl/CGI-Fast
+		)
+	dhcpd? (
+		>=net-misc/dhcp-3[server]
+		dev-perl/Net-IP
+		dev-perl/HTTP-Date
+		)
+	doc? ( dev-python/sphinx )
+	http? ( dev-perl/libwww-perl )
+	irc? ( dev-perl/Net-IRC )
+	ldap? ( dev-perl/perl-ldap )
+	kernel_linux? ( sys-process/procps )
+	memcached? ( dev-perl/Cache-Memcached )
+	mysql? (
+		virtual/mysql
+		dev-perl/Cache-Cache
+		dev-perl/DBD-mysql
+		)
+	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
+	ssl? ( dev-perl/Net-SSLeay )
+	syslog? ( virtual/perl-Sys-Syslog )
+	!minimal? (
+		dev-perl/HTML-Template
+		dev-perl/IO-Socket-INET6
+		dev-perl/URI
+		>=net-analyzer/rrdtool-1.3[graph,perl]
+		virtual/ssh
+		)
+	"
+
+# Keep this seperate, as previous versions have had other deps here
+DEPEND="${DEPEND_COM}
+	dev-perl/Module-Build
+	java? ( >=virtual/jdk-1.5 )
+	test? (
+		dev-perl/Test-Deep
+		dev-perl/Test-Exception
+		dev-perl/Test-LongString
+		dev-perl/Test-Differences
+		dev-perl/Test-MockModule
+		dev-perl/Test-MockObject
+		dev-perl/File-Slurp
+		dev-perl/IO-stringy
+		dev-perl/IO-Socket-INET6
+	)"
+RDEPEND="${DEPEND_COM}
+		virtual/awk
+		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
+		java? (
+			>=virtual/jre-1.5
+			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
+		)
+		!minimal? (
+			virtual/cron
+			media-fonts/dejavu
+		)
+		selinux? ( sec-policy/selinux-munin )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+	java-pkg-opt-2_pkg_setup
+}
+
+src_prepare() {
+	echo ${PV} > RELEASE || die
+
+	eapply "${WORKDIR}"/patches/*.patch
+
+	eapply_user
+
+	java-pkg-opt-2_src_prepare
+}
+
+src_configure() {
+	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
+	use cgi || cgidir="${T}/useless/cgi-bin"
+
+	local cgiuser=$(usex apache2 apache munin)
+
+	cat >> "${S}"/Makefile.config <<- EOF
+	PREFIX=\$(DESTDIR)/usr
+	CONFDIR=\$(DESTDIR)/etc/munin
+	DOCDIR=${T}/useless/doc
+	MANDIR=\$(PREFIX)/share/man
+	LIBDIR=\$(PREFIX)/libexec/munin
+	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
+	CGIDIR=${cgidir}
+	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
+	CGIUSER=${cgiuser}
+	DBDIR=\$(DESTDIR)/var/lib/munin
+	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
+	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
+	LOGDIR=\$(DESTDIR)/var/log/munin
+	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
+	JCVALID=$(usex java yes no)
+	STATEDIR=\$(DESTDIR)/run/munin
+	EOF
+}
+
+# parallel make and install need to be fixed before, and I haven't
+# gotten around to do so yet.
+src_compile() {
+	emake -j1
+	use doc && emake -C doc html
+}
+
+src_test() {
+	if [[ ${EUID} == 0 ]]; then
+		eerror "You cannot run tests as root."
+		eerror "Please enable FEATURES=userpriv before proceeding."
+		return 1
+	fi
+
+	local testtargets="test-common test-node test-plugins"
+	use minimal || testtargets+=" test-master"
+
+	LC_ALL=C emake -j1 ${testtargets}
+}
+
+src_install() {
+	local dirs="
+		/var/log/munin
+		/var/lib/munin/plugin-state
+		/var/lib/munin-node/plugin-state
+		/var/www/localhost/htdocs/munin
+		/etc/munin/plugin-conf.d
+		/etc/munin/plugins"
+	use minimal || dirs+=" /etc/munin/munin-conf.d/"
+
+	keepdir ${dirs}
+	fowners munin:munin ${dirs}
+
+	# parallel install doesn't work and it's also pointless to have this
+	# run in parallel for now (because it uses internal loops).
+	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
+
+	# we remove /run from the install, as it's not the package's to deal
+	# with.
+	rm -rf "${D}"/run || die
+
+	# remove the plugins for non-Gentoo package managers; use -f so that
+	# it doesn't fail when installing on non-Linux platforms.
+	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
+
+	insinto /etc/munin/plugin-conf.d/
+	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
+
+	newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
+	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
+
+	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
+
+	dodir /usr/lib/tmpfiles.d
+	cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
+	d /run/munin 0700 munin munin - -
+	EOF
+
+	systemd_dounit "${FILESDIR}"/munin-async.service
+	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
+	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
+	systemd_dounit "${FILESDIR}"/munin-node.service
+
+	cat >> "${T}"/munin.env <<- EOF
+	CONFIG_PROTECT=/var/spool/munin-async/.ssh
+	EOF
+	newenvd "${T}"/munin.env 50munin
+
+	dodoc README ChangeLog INSTALL
+	if use doc; then
+		cd "${S}"/doc/_build/html || die
+		docinto html
+		dodoc -r *
+		cd "${S}" || die
+	fi
+
+	dodir /etc/logrotate.d/
+	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
+		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
+
+	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
+
+	if use syslog; then
+		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
+			"${D}"/etc/munin/munin-node.conf || die
+	fi
+
+	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
+	# munin-node service is ran as user root, and only later drops
+	# privileges.
+	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
+		"${D}"/etc/munin/munin-node.conf || die
+
+	keepdir /var/spool/munin-async/.ssh
+	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
+	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
+	fperms 0750 /var/spool/munin-async{,/.ssh}
+	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
+
+	if use minimal; then
+		# This requires the presence of munin-update, which is part of
+		# the non-minimal install...
+		rm "${D}"/usr/libexec/munin/plugins/munin_stats
+	else
+		# remove font files so that we don't have to keep them around
+		rm "${D}"/usr/libexec/${PN}/*.ttf || die
+
+		if use cgi; then
+			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
+
+			keepdir /var/cache/munin-cgi
+			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
+			fowners $(usex apache2 apache munin) \
+				/var/cache/munin-cgi \
+				/var/log/munin/munin-cgi-{graph,html}.log
+
+			if use apache2; then
+				insinto /etc/apache2/vhosts.d
+				newins "${FILESDIR}"/munin.apache.include munin.include
+				newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include
+			fi
+		else
+			sed \
+				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
+				-i "${D}"/etc/munin/munin.conf || die
+		fi
+
+		keepdir /var/lib/munin/.ssh
+		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
+		IdentityFile /var/lib/munin/.ssh/id_ecdsa
+		IdentityFile /var/lib/munin/.ssh/id_rsa
+		EOF
+
+		fowners munin:munin /var/lib/munin/.ssh/{,config}
+		fperms go-rwx /var/lib/munin/.ssh/{,config}
+
+		dodir /usr/share/${PN}
+		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
+		# Force the shell to bash
+		SHELL=/bin/bash
+		# Mail reports to root@, not munin@
+		MAILTO=root
+
+		# This runs the munin task every 5 minutes.
+		*/5	* * * *		/usr/bin/munin-cron
+
+		# Alternatively, this route works differently
+		# Update once a minute (for busy sites)
+		#*/1 * * * *		/usr/libexec/munin/munin-update
+		## Check for limit excess every 2 minutes
+		#*/2 * * * *		/usr/libexec/munin/munin-limits
+		## Update graphs every 5 minutes
+		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
+		## Update HTML pages every 15 minutes
+		#*/15 * * * *		nice /usr/libexec/munin/munin-html
+		EOF
+
+		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
+		# Mail reports to root@, not munin@, only execute one at a time
+		!mailto(root),serial(true)
+
+		# This runs the munin task every 5 minutes.
+		@ 5		/usr/bin/munin-cron
+
+		# Alternatively, this route works differently
+		# Update once a minute (for busy sites)
+		#@ 1	/usr/libexec/munin/munin-update
+		## Check for limit excess every 2 minutes
+		#@ 2	/usr/libexec/munin/munin-limits
+		## Update graphs every 5 minutes
+		#@ 5	nice /usr/libexec/munin/munin-graph
+		## Update HTML pages every 15 minutes
+		#@ 15	nice /usr/libexec/munin/munin-html
+		EOF
+
+		# remove .htaccess file
+		find "${D}" -name .htaccess -delete || die
+	fi
+}
+
+pkg_config() {
+	if use minimal; then
+		einfo "Nothing to do."
+		return 0
+	fi
+
+	einfo "Press enter to install the default crontab for the munin master"
+	einfo "installation from /usr/share/${PN}/f?crontab"
+	einfo "If you have a large site, you may wish to customize it."
+	read
+
+	ebegin "Setting up cron ..."
+	if has_version sys-process/fcron; then
+		fcrontab - -u munin < /usr/share/${PN}/fcrontab
+	else
+		# dcron is very fussy about syntax
+		# the following is the only form that works in BOTH dcron and vixie-cron
+		crontab - -u munin < /usr/share/${PN}/crontab
+	fi
+	eend $?
+
+	einfo "Press enter to set up the SSH keys used for SSH transport"
+	read
+
+	# generate one rsa (for legacy) and one ecdsa (for new systems)
+	ssh-keygen -t rsa \
+		-f /var/lib/munin/.ssh/id_rsa -N '' \
+		-C "created by portage for ${CATEGORY}/${PN}" || die
+	ssh-keygen -t ecdsa \
+		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
+		-C "created by portage for ${CATEGORY}/${PN}" || die
+	chown -R munin:munin /var/lib/munin/.ssh || die
+	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
+
+	einfo "Your public keys are available in "
+	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
+	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
+	einfo "and follows for convenience"
+	echo
+	cat /var/lib/munin/.ssh/id_*.pub
+}
+
+pkg_postinst() {
+	elog "Please follow the munin documentation to set up the plugins you"
+	elog "need, afterwards start munin-node."
+	elog ""
+	elog "To make use of munin-async, make sure to set up the corresponding"
+	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
+	elog ""
+	if ! use minimal; then
+		elog "Please run"
+		elog "  emerge --config net-analyzer/munin"
+		elog "to automatically configure munin's cronjobs as well as generate"
+		elog "passwordless SSH keys to be used with munin-async."
+	fi
+	elog ""
+	elog "Further information about setting up Munin in Gentoo can be found"
+	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
+
+	if use cgi; then
+		chown $(usex apache2 apache munin) \
+			"${ROOT}"/var/cache/munin-cgi \
+			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
+
+		if use apache2; then
+			elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include"
+			elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual"
+			elog "host you want it to be served."
+			elog "If you want to enable CGI-based HTML as well, you have to add to"
+			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
+		else
+			elog "Effective CGI support has just been added in 2.0.7-r6."
+			elog "Documentation on how to use it is still sparse."
+		fi
+	fi
+
+	# we create this here as we don't want Portage to check /run
+	# symlinks but we still need this to be present before the reboot.
+	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
+		mkdir "${ROOT}"/run/munin
+		chown munin:munin "${ROOT}"/run/munin
+		chmod 0700 "${ROOT}"/run/munin
+	fi
+}
diff --git a/net-analyzer/munin/munin-2.0.66.ebuild b/net-analyzer/munin/munin-2.0.66.ebuild
deleted file mode 100644
index 7a5621b5deb7..000000000000
--- a/net-analyzer/munin/munin-2.0.66.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/"
-SRC_URI="
-	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
-	https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~arm64 ppc ~ppc64 x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
-DEPEND_COM="
-	acct-user/munin
-	acct-user/munin-async
-	acct-group/munin
-	dev-lang/perl:=[berkdb]
-	dev-perl/DBI
-	dev-perl/Date-Manip
-	dev-perl/File-Copy-Recursive
-	dev-perl/List-MoreUtils
-	dev-perl/Log-Log4perl
-	dev-perl/Net-CIDR
-	dev-perl/Net-DNS
-	dev-perl/Net-Netmask
-	dev-perl/Net-SNMP
-	dev-perl/Net-Server[ipv6(-)?]
-	virtual/perl-Digest-MD5
-	virtual/perl-Getopt-Long
-	virtual/perl-MIME-Base64
-	virtual/perl-Storable
-	virtual/perl-Text-Balanced
-	virtual/perl-Time-HiRes
-	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
-	asterisk? ( dev-perl/Net-Telnet )
-	cgi? (
-		dev-perl/FCGI
-		dev-perl/CGI-Fast
-		)
-	dhcpd? (
-		>=net-misc/dhcp-3[server]
-		dev-perl/Net-IP
-		dev-perl/HTTP-Date
-		)
-	doc? ( dev-python/sphinx )
-	http? ( dev-perl/libwww-perl )
-	irc? ( dev-perl/Net-IRC )
-	ldap? ( dev-perl/perl-ldap )
-	kernel_linux? ( sys-process/procps )
-	memcached? ( dev-perl/Cache-Memcached )
-	mysql? (
-		virtual/mysql
-		dev-perl/Cache-Cache
-		dev-perl/DBD-mysql
-		)
-	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
-	ssl? ( dev-perl/Net-SSLeay )
-	syslog? ( virtual/perl-Sys-Syslog )
-	!minimal? (
-		dev-perl/HTML-Template
-		dev-perl/IO-Socket-INET6
-		dev-perl/URI
-		>=net-analyzer/rrdtool-1.3[graph,perl]
-		virtual/ssh
-		)
-	"
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
-	dev-perl/Module-Build
-	java? ( >=virtual/jdk-1.5 )
-	test? (
-		dev-perl/Test-Deep
-		dev-perl/Test-Exception
-		dev-perl/Test-LongString
-		dev-perl/Test-Differences
-		dev-perl/Test-MockModule
-		dev-perl/Test-MockObject
-		dev-perl/File-Slurp
-		dev-perl/IO-stringy
-		dev-perl/IO-Socket-INET6
-	)"
-RDEPEND="${DEPEND_COM}
-		virtual/awk
-		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
-		java? (
-			>=virtual/jre-1.5
-			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
-		)
-		!minimal? (
-			virtual/cron
-			media-fonts/dejavu
-		)
-		selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
-	echo ${PV} > RELEASE || die
-
-	eapply "${WORKDIR}"/patches/*.patch
-
-	eapply_user
-
-	java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
-	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
-	use cgi || cgidir="${T}/useless/cgi-bin"
-
-	local cgiuser=$(usex apache2 apache munin)
-
-	cat >> "${S}"/Makefile.config <<- EOF
-	PREFIX=\$(DESTDIR)/usr
-	CONFDIR=\$(DESTDIR)/etc/munin
-	DOCDIR=${T}/useless/doc
-	MANDIR=\$(PREFIX)/share/man
-	LIBDIR=\$(PREFIX)/libexec/munin
-	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
-	CGIDIR=${cgidir}
-	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
-	CGIUSER=${cgiuser}
-	DBDIR=\$(DESTDIR)/var/lib/munin
-	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
-	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
-	LOGDIR=\$(DESTDIR)/var/log/munin
-	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
-	JCVALID=$(usex java yes no)
-	STATEDIR=\$(DESTDIR)/run/munin
-	EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
-	emake -j1
-	use doc && emake -C doc html
-}
-
-src_test() {
-	if [[ ${EUID} == 0 ]]; then
-		eerror "You cannot run tests as root."
-		eerror "Please enable FEATURES=userpriv before proceeding."
-		return 1
-	fi
-
-	local testtargets="test-common test-node test-plugins"
-	use minimal || testtargets+=" test-master"
-
-	LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
-	local dirs="
-		/var/log/munin
-		/var/lib/munin/plugin-state
-		/var/lib/munin-node/plugin-state
-		/var/www/localhost/htdocs/munin
-		/etc/munin/plugin-conf.d
-		/etc/munin/plugins"
-	use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
-	keepdir ${dirs}
-	fowners munin:munin ${dirs}
-
-	# parallel install doesn't work and it's also pointless to have this
-	# run in parallel for now (because it uses internal loops).
-	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
-
-	# we remove /run from the install, as it's not the package's to deal
-	# with.
-	rm -rf "${D}"/run || die
-
-	# remove the plugins for non-Gentoo package managers; use -f so that
-	# it doesn't fail when installing on non-Linux platforms.
-	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
-	insinto /etc/munin/plugin-conf.d/
-	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
-	newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
-	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
-	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
-	dodir /usr/lib/tmpfiles.d
-	cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
-	d /run/munin 0700 munin munin - -
-	EOF
-
-	systemd_dounit "${FILESDIR}"/munin-async.service
-	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-node.service
-
-	cat >> "${T}"/munin.env <<- EOF
-	CONFIG_PROTECT=/var/spool/munin-async/.ssh
-	EOF
-	newenvd "${T}"/munin.env 50munin
-
-	dodoc README ChangeLog INSTALL
-	if use doc; then
-		cd "${S}"/doc/_build/html || die
-		docinto html
-		dodoc -r *
-		cd "${S}" || die
-	fi
-
-	dodir /etc/logrotate.d/
-	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
-		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
-	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
-	if use syslog; then
-		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
-			"${D}"/etc/munin/munin-node.conf || die
-	fi
-
-	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
-	# munin-node service is ran as user root, and only later drops
-	# privileges.
-	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
-		"${D}"/etc/munin/munin-node.conf || die
-
-	keepdir /var/spool/munin-async/.ssh
-	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
-	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
-	fperms 0750 /var/spool/munin-async{,/.ssh}
-	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
-	if use minimal; then
-		# This requires the presence of munin-update, which is part of
-		# the non-minimal install...
-		rm "${D}"/usr/libexec/munin/plugins/munin_stats
-	else
-		# remove font files so that we don't have to keep them around
-		rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
-		if use cgi; then
-			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
-
-			keepdir /var/cache/munin-cgi
-			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
-			fowners $(usex apache2 apache munin) \
-				/var/cache/munin-cgi \
-				/var/log/munin/munin-cgi-{graph,html}.log
-
-			if use apache2; then
-				insinto /etc/apache2/vhosts.d
-				newins "${FILESDIR}"/munin.apache.include munin.include
-				newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include
-			fi
-		else
-			sed \
-				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
-				-i "${D}"/etc/munin/munin.conf || die
-		fi
-
-		keepdir /var/lib/munin/.ssh
-		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
-		IdentityFile /var/lib/munin/.ssh/id_ecdsa
-		IdentityFile /var/lib/munin/.ssh/id_rsa
-		EOF
-
-		fowners munin:munin /var/lib/munin/.ssh/{,config}
-		fperms go-rwx /var/lib/munin/.ssh/{,config}
-
-		dodir /usr/share/${PN}
-		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
-		# Force the shell to bash
-		SHELL=/bin/bash
-		# Mail reports to root@, not munin@
-		MAILTO=root
-
-		# This runs the munin task every 5 minutes.
-		*/5	* * * *		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#*/1 * * * *		/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#*/2 * * * *		/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#*/15 * * * *		nice /usr/libexec/munin/munin-html
-		EOF
-
-		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
-		# Mail reports to root@, not munin@, only execute one at a time
-		!mailto(root),serial(true)
-
-		# This runs the munin task every 5 minutes.
-		@ 5		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#@ 1	/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#@ 2	/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#@ 5	nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#@ 15	nice /usr/libexec/munin/munin-html
-		EOF
-
-		# remove .htaccess file
-		find "${D}" -name .htaccess -delete || die
-	fi
-}
-
-pkg_config() {
-	if use minimal; then
-		einfo "Nothing to do."
-		return 0
-	fi
-
-	einfo "Press enter to install the default crontab for the munin master"
-	einfo "installation from /usr/share/${PN}/f?crontab"
-	einfo "If you have a large site, you may wish to customize it."
-	read
-
-	ebegin "Setting up cron ..."
-	if has_version sys-process/fcron; then
-		fcrontab - -u munin < /usr/share/${PN}/fcrontab
-	else
-		# dcron is very fussy about syntax
-		# the following is the only form that works in BOTH dcron and vixie-cron
-		crontab - -u munin < /usr/share/${PN}/crontab
-	fi
-	eend $?
-
-	einfo "Press enter to set up the SSH keys used for SSH transport"
-	read
-
-	# generate one rsa (for legacy) and one ecdsa (for new systems)
-	ssh-keygen -t rsa \
-		-f /var/lib/munin/.ssh/id_rsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	ssh-keygen -t ecdsa \
-		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	chown -R munin:munin /var/lib/munin/.ssh || die
-	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
-	einfo "Your public keys are available in "
-	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
-	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
-	einfo "and follows for convenience"
-	echo
-	cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
-	elog "Please follow the munin documentation to set up the plugins you"
-	elog "need, afterwards start munin-node."
-	elog ""
-	elog "To make use of munin-async, make sure to set up the corresponding"
-	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
-	elog ""
-	if ! use minimal; then
-		elog "Please run"
-		elog "  emerge --config net-analyzer/munin"
-		elog "to automatically configure munin's cronjobs as well as generate"
-		elog "passwordless SSH keys to be used with munin-async."
-	fi
-	elog ""
-	elog "Further information about setting up Munin in Gentoo can be found"
-	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
-
-	if use cgi; then
-		chown $(usex apache2 apache munin) \
-			"${ROOT}"/var/cache/munin-cgi \
-			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
-		if use apache2; then
-			elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include"
-			elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual"
-			elog "host you want it to be served."
-			elog "If you want to enable CGI-based HTML as well, you have to add to"
-			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
-		else
-			elog "Effective CGI support has just been added in 2.0.7-r6."
-			elog "Documentation on how to use it is still sparse."
-		fi
-	fi
-
-	# we create this here as we don't want Portage to check /run
-	# symlinks but we still need this to be present before the reboot.
-	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
-		mkdir "${ROOT}"/run/munin
-		chown munin:munin "${ROOT}"/run/munin
-		chmod 0700 "${ROOT}"/run/munin
-	fi
-}
diff --git a/net-analyzer/munin/munin-2.0.67-r1.ebuild b/net-analyzer/munin/munin-2.0.67-r1.ebuild
deleted file mode 100644
index 9f666d4ad680..000000000000
--- a/net-analyzer/munin/munin-2.0.67-r1.ebuild
+++ /dev/null
@@ -1,417 +0,0 @@
-# Copyright 1999-2021 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-
-PATCHSET=1
-
-inherit java-pkg-opt-2 systemd
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Munin Server Monitoring Tool"
-HOMEPAGE="http://munin-monitoring.org/"
-SRC_URI="
-	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
-	https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~arm ~arm64 ppc ~ppc64 ~x86"
-IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
-REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
-RESTRICT="!test? ( test )"
-
-# Upstream's listing of required modules is NOT correct!
-# Some of the postgres plugins use DBD::Pg, while others call psql directly.
-# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
-# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
-DEPEND_COM="
-	acct-user/munin
-	acct-user/munin-async
-	acct-group/munin
-	dev-lang/perl:=[berkdb]
-	dev-perl/DBI
-	dev-perl/Date-Manip
-	dev-perl/File-Copy-Recursive
-	dev-perl/List-MoreUtils
-	dev-perl/Log-Log4perl
-	dev-perl/Net-CIDR
-	dev-perl/Net-DNS
-	dev-perl/Net-Netmask
-	dev-perl/Net-SNMP
-	dev-perl/Net-Server[ipv6(-)?]
-	virtual/perl-Digest-MD5
-	virtual/perl-Getopt-Long
-	virtual/perl-MIME-Base64
-	virtual/perl-Storable
-	virtual/perl-Text-Balanced
-	virtual/perl-Time-HiRes
-	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
-	asterisk? ( dev-perl/Net-Telnet )
-	cgi? (
-		dev-perl/FCGI
-		dev-perl/CGI-Fast
-		)
-	dhcpd? (
-		>=net-misc/dhcp-3[server]
-		dev-perl/Net-IP
-		dev-perl/HTTP-Date
-		)
-	doc? ( dev-python/sphinx )
-	http? ( dev-perl/libwww-perl )
-	irc? ( dev-perl/Net-IRC )
-	ldap? ( dev-perl/perl-ldap )
-	kernel_linux? ( sys-process/procps )
-	memcached? ( dev-perl/Cache-Memcached )
-	mysql? (
-		virtual/mysql
-		dev-perl/Cache-Cache
-		dev-perl/DBD-mysql
-		)
-	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
-	ssl? ( dev-perl/Net-SSLeay )
-	syslog? ( virtual/perl-Sys-Syslog )
-	!minimal? (
-		dev-perl/HTML-Template
-		dev-perl/IO-Socket-INET6
-		dev-perl/URI
-		>=net-analyzer/rrdtool-1.3[graph,perl]
-		virtual/ssh
-		)
-	"
-
-# Keep this seperate, as previous versions have had other deps here
-DEPEND="${DEPEND_COM}
-	dev-perl/Module-Build
-	java? ( >=virtual/jdk-1.8 )
-	test? (
-		dev-perl/Test-Deep
-		dev-perl/Test-Exception
-		dev-perl/Test-LongString
-		dev-perl/Test-Differences
-		dev-perl/Test-MockModule
-		dev-perl/Test-MockObject
-		dev-perl/File-Slurp
-		dev-perl/IO-stringy
-		dev-perl/IO-Socket-INET6
-	)"
-RDEPEND="${DEPEND_COM}
-		virtual/awk
-		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
-		java? (
-			>=virtual/jre-1.8:*
-			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
-		)
-		!minimal? (
-			virtual/cron
-			media-fonts/dejavu
-		)
-		selinux? ( sec-policy/selinux-munin )"
-
-S="${WORKDIR}/${MY_P}"
-
-pkg_setup() {
-	java-pkg-opt-2_pkg_setup
-}
-
-src_prepare() {
-	echo ${PV} > RELEASE || die
-
-	eapply "${WORKDIR}"/patches/*.patch
-
-	eapply_user
-
-	java-pkg-opt-2_src_prepare
-}
-
-src_configure() {
-	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
-	use cgi || cgidir="${T}/useless/cgi-bin"
-
-	local cgiuser=$(usex apache2 apache munin)
-
-	cat >> "${S}"/Makefile.config <<- EOF
-	PREFIX=\$(DESTDIR)/usr
-	CONFDIR=\$(DESTDIR)/etc/munin
-	DOCDIR=${T}/useless/doc
-	MANDIR=\$(PREFIX)/share/man
-	LIBDIR=\$(PREFIX)/libexec/munin
-	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
-	CGIDIR=${cgidir}
-	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
-	CGIUSER=${cgiuser}
-	DBDIR=\$(DESTDIR)/var/lib/munin
-	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
-	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
-	LOGDIR=\$(DESTDIR)/var/log/munin
-	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
-	JCVALID=$(usex java yes no)
-	STATEDIR=\$(DESTDIR)/run/munin
-	EOF
-}
-
-# parallel make and install need to be fixed before, and I haven't
-# gotten around to do so yet.
-src_compile() {
-	emake -j1
-	use doc && emake -C doc html
-}
-
-src_test() {
-	if [[ ${EUID} == 0 ]]; then
-		eerror "You cannot run tests as root."
-		eerror "Please enable FEATURES=userpriv before proceeding."
-		return 1
-	fi
-
-	local testtargets="test-common test-node test-plugins"
-	use minimal || testtargets+=" test-master"
-
-	LC_ALL=C emake -j1 ${testtargets}
-}
-
-src_install() {
-	local dirs="
-		/var/log/munin
-		/var/lib/munin/plugin-state
-		/var/lib/munin-node/plugin-state
-		/var/www/localhost/htdocs/munin
-		/etc/munin/plugin-conf.d
-		/etc/munin/plugins"
-	use minimal || dirs+=" /etc/munin/munin-conf.d/"
-
-	keepdir ${dirs}
-	fowners munin:munin ${dirs}
-
-	# parallel install doesn't work and it's also pointless to have this
-	# run in parallel for now (because it uses internal loops).
-	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
-
-	# we remove /run from the install, as it's not the package's to deal
-	# with.
-	rm -rf "${D}"/run || die
-
-	# remove the plugins for non-Gentoo package managers; use -f so that
-	# it doesn't fail when installing on non-Linux platforms.
-	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
-
-	insinto /etc/munin/plugin-conf.d/
-	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
-
-	newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
-	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
-
-	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
-
-	dodir /usr/lib/tmpfiles.d
-	cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
-	d /run/munin 0700 munin munin - -
-	EOF
-
-	systemd_dounit "${FILESDIR}"/munin-async.service
-	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
-	systemd_dounit "${FILESDIR}"/munin-node.service
-
-	cat >> "${T}"/munin.env <<- EOF
-	CONFIG_PROTECT=/var/spool/munin-async/.ssh
-	EOF
-	newenvd "${T}"/munin.env 50munin
-
-	dodoc README ChangeLog INSTALL
-	if use doc; then
-		cd "${S}"/doc/_build/html || die
-		docinto html
-		dodoc -r *
-		cd "${S}" || die
-	fi
-
-	dodir /etc/logrotate.d/
-	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
-		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
-
-	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
-
-	if use syslog; then
-		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
-			"${D}"/etc/munin/munin-node.conf || die
-	fi
-
-	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
-	# munin-node service is ran as user root, and only later drops
-	# privileges.
-	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
-		"${D}"/etc/munin/munin-node.conf || die
-
-	keepdir /var/spool/munin-async/.ssh
-	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
-	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
-	fperms 0750 /var/spool/munin-async{,/.ssh}
-	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
-
-	if use minimal; then
-		# This requires the presence of munin-update, which is part of
-		# the non-minimal install...
-		rm "${D}"/usr/libexec/munin/plugins/munin_stats
-	else
-		# remove font files so that we don't have to keep them around
-		rm "${D}"/usr/libexec/${PN}/*.ttf || die
-
-		if use cgi; then
-			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
-
-			keepdir /var/cache/munin-cgi
-			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
-			fowners $(usex apache2 apache munin) \
-				/var/cache/munin-cgi \
-				/var/log/munin/munin-cgi-{graph,html}.log
-
-			if use apache2; then
-				insinto /etc/apache2/vhosts.d
-				newins "${FILESDIR}"/munin.apache.include munin.include
-				newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include
-			fi
-		else
-			sed \
-				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
-				-i "${D}"/etc/munin/munin.conf || die
-		fi
-
-		keepdir /var/lib/munin/.ssh
-		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
-		IdentityFile /var/lib/munin/.ssh/id_ecdsa
-		IdentityFile /var/lib/munin/.ssh/id_rsa
-		EOF
-
-		fowners munin:munin /var/lib/munin/.ssh/{,config}
-		fperms go-rwx /var/lib/munin/.ssh/{,config}
-
-		dodir /usr/share/${PN}
-		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
-		# Force the shell to bash
-		SHELL=/bin/bash
-		# Mail reports to root@, not munin@
-		MAILTO=root
-
-		# This runs the munin task every 5 minutes.
-		*/5	* * * *		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#*/1 * * * *		/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#*/2 * * * *		/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#*/15 * * * *		nice /usr/libexec/munin/munin-html
-		EOF
-
-		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
-		# Mail reports to root@, not munin@, only execute one at a time
-		!mailto(root),serial(true)
-
-		# This runs the munin task every 5 minutes.
-		@ 5		/usr/bin/munin-cron
-
-		# Alternatively, this route works differently
-		# Update once a minute (for busy sites)
-		#@ 1	/usr/libexec/munin/munin-update
-		## Check for limit excess every 2 minutes
-		#@ 2	/usr/libexec/munin/munin-limits
-		## Update graphs every 5 minutes
-		#@ 5	nice /usr/libexec/munin/munin-graph
-		## Update HTML pages every 15 minutes
-		#@ 15	nice /usr/libexec/munin/munin-html
-		EOF
-
-		# remove .htaccess file
-		find "${D}" -name .htaccess -delete || die
-	fi
-}
-
-pkg_config() {
-	if use minimal; then
-		einfo "Nothing to do."
-		return 0
-	fi
-
-	einfo "Press enter to install the default crontab for the munin master"
-	einfo "installation from /usr/share/${PN}/f?crontab"
-	einfo "If you have a large site, you may wish to customize it."
-	read
-
-	ebegin "Setting up cron ..."
-	if has_version sys-process/fcron; then
-		fcrontab - -u munin < /usr/share/${PN}/fcrontab
-	else
-		# dcron is very fussy about syntax
-		# the following is the only form that works in BOTH dcron and vixie-cron
-		crontab - -u munin < /usr/share/${PN}/crontab
-	fi
-	eend $?
-
-	einfo "Press enter to set up the SSH keys used for SSH transport"
-	read
-
-	# generate one rsa (for legacy) and one ecdsa (for new systems)
-	ssh-keygen -t rsa \
-		-f /var/lib/munin/.ssh/id_rsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	ssh-keygen -t ecdsa \
-		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
-		-C "created by portage for ${CATEGORY}/${PN}" || die
-	chown -R munin:munin /var/lib/munin/.ssh || die
-	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
-
-	einfo "Your public keys are available in "
-	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
-	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
-	einfo "and follows for convenience"
-	echo
-	cat /var/lib/munin/.ssh/id_*.pub
-}
-
-pkg_postinst() {
-	elog "Please follow the munin documentation to set up the plugins you"
-	elog "need, afterwards start munin-node."
-	elog ""
-	elog "To make use of munin-async, make sure to set up the corresponding"
-	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
-	elog ""
-	if ! use minimal; then
-		elog "Please run"
-		elog "  emerge --config net-analyzer/munin"
-		elog "to automatically configure munin's cronjobs as well as generate"
-		elog "passwordless SSH keys to be used with munin-async."
-	fi
-	elog ""
-	elog "Further information about setting up Munin in Gentoo can be found"
-	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
-
-	if use cgi; then
-		chown $(usex apache2 apache munin) \
-			"${ROOT}"/var/cache/munin-cgi \
-			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
-
-		if use apache2; then
-			elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include"
-			elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual"
-			elog "host you want it to be served."
-			elog "If you want to enable CGI-based HTML as well, you have to add to"
-			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
-		else
-			elog "Effective CGI support has just been added in 2.0.7-r6."
-			elog "Documentation on how to use it is still sparse."
-		fi
-	fi
-
-	# we create this here as we don't want Portage to check /run
-	# symlinks but we still need this to be present before the reboot.
-	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
-		mkdir "${ROOT}"/run/munin
-		chown munin:munin "${ROOT}"/run/munin
-		chmod 0700 "${ROOT}"/run/munin
-	fi
-}
diff --git a/net-analyzer/munin/munin-2.0.67-r2.ebuild b/net-analyzer/munin/munin-2.0.67-r2.ebuild
new file mode 100644
index 000000000000..9f666d4ad680
--- /dev/null
+++ b/net-analyzer/munin/munin-2.0.67-r2.ebuild
@@ -0,0 +1,417 @@
+# Copyright 1999-2021 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PATCHSET=1
+
+inherit java-pkg-opt-2 systemd
+
+MY_P=${P/_/-}
+
+DESCRIPTION="Munin Server Monitoring Tool"
+HOMEPAGE="http://munin-monitoring.org/"
+SRC_URI="
+	https://github.com/munin-monitoring/munin/archive/${PV}.tar.gz -> ${P}.tar.gz
+	https://dev.gentoo.org/~graaff/munin/${P}-gentoo-${PATCHSET}.tar.xz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="amd64 ~arm ~arm64 ppc ~ppc64 ~x86"
+IUSE="asterisk irc java ldap memcached minimal mysql postgres selinux ssl test cgi ipv6 syslog ipmi http dhcpd doc apache2"
+REQUIRED_USE="cgi? ( !minimal ) apache2? ( cgi )"
+RESTRICT="!test? ( test )"
+
+# Upstream's listing of required modules is NOT correct!
+# Some of the postgres plugins use DBD::Pg, while others call psql directly.
+# Some of the mysql plugins use DBD::mysql, while others call mysqladmin directly.
+# We replace the original ipmi plugins with the freeipmi_ plugin which at least works.
+DEPEND_COM="
+	acct-user/munin
+	acct-user/munin-async
+	acct-group/munin
+	dev-lang/perl:=[berkdb]
+	dev-perl/DBI
+	dev-perl/Date-Manip
+	dev-perl/File-Copy-Recursive
+	dev-perl/List-MoreUtils
+	dev-perl/Log-Log4perl
+	dev-perl/Net-CIDR
+	dev-perl/Net-DNS
+	dev-perl/Net-Netmask
+	dev-perl/Net-SNMP
+	dev-perl/Net-Server[ipv6(-)?]
+	virtual/perl-Digest-MD5
+	virtual/perl-Getopt-Long
+	virtual/perl-MIME-Base64
+	virtual/perl-Storable
+	virtual/perl-Text-Balanced
+	virtual/perl-Time-HiRes
+	apache2? ( www-servers/apache[apache2_modules_cgi,apache2_modules_cgid,apache2_modules_rewrite] )
+	asterisk? ( dev-perl/Net-Telnet )
+	cgi? (
+		dev-perl/FCGI
+		dev-perl/CGI-Fast
+		)
+	dhcpd? (
+		>=net-misc/dhcp-3[server]
+		dev-perl/Net-IP
+		dev-perl/HTTP-Date
+		)
+	doc? ( dev-python/sphinx )
+	http? ( dev-perl/libwww-perl )
+	irc? ( dev-perl/Net-IRC )
+	ldap? ( dev-perl/perl-ldap )
+	kernel_linux? ( sys-process/procps )
+	memcached? ( dev-perl/Cache-Memcached )
+	mysql? (
+		virtual/mysql
+		dev-perl/Cache-Cache
+		dev-perl/DBD-mysql
+		)
+	postgres? ( dev-perl/DBD-Pg dev-db/postgresql:* )
+	ssl? ( dev-perl/Net-SSLeay )
+	syslog? ( virtual/perl-Sys-Syslog )
+	!minimal? (
+		dev-perl/HTML-Template
+		dev-perl/IO-Socket-INET6
+		dev-perl/URI
+		>=net-analyzer/rrdtool-1.3[graph,perl]
+		virtual/ssh
+		)
+	"
+
+# Keep this seperate, as previous versions have had other deps here
+DEPEND="${DEPEND_COM}
+	dev-perl/Module-Build
+	java? ( >=virtual/jdk-1.8 )
+	test? (
+		dev-perl/Test-Deep
+		dev-perl/Test-Exception
+		dev-perl/Test-LongString
+		dev-perl/Test-Differences
+		dev-perl/Test-MockModule
+		dev-perl/Test-MockObject
+		dev-perl/File-Slurp
+		dev-perl/IO-stringy
+		dev-perl/IO-Socket-INET6
+	)"
+RDEPEND="${DEPEND_COM}
+		virtual/awk
+		ipmi? ( >=sys-libs/freeipmi-1.1.6-r1 )
+		java? (
+			>=virtual/jre-1.8:*
+			|| ( net-analyzer/netcat net-analyzer/openbsd-netcat )
+		)
+		!minimal? (
+			virtual/cron
+			media-fonts/dejavu
+		)
+		selinux? ( sec-policy/selinux-munin )"
+
+S="${WORKDIR}/${MY_P}"
+
+pkg_setup() {
+	java-pkg-opt-2_pkg_setup
+}
+
+src_prepare() {
+	echo ${PV} > RELEASE || die
+
+	eapply "${WORKDIR}"/patches/*.patch
+
+	eapply_user
+
+	java-pkg-opt-2_src_prepare
+}
+
+src_configure() {
+	local cgidir='$(DESTDIR)/usr/libexec/munin/cgi'
+	use cgi || cgidir="${T}/useless/cgi-bin"
+
+	local cgiuser=$(usex apache2 apache munin)
+
+	cat >> "${S}"/Makefile.config <<- EOF
+	PREFIX=\$(DESTDIR)/usr
+	CONFDIR=\$(DESTDIR)/etc/munin
+	DOCDIR=${T}/useless/doc
+	MANDIR=\$(PREFIX)/share/man
+	LIBDIR=\$(PREFIX)/libexec/munin
+	HTMLDIR=\$(DESTDIR)/var/www/localhost/htdocs/munin
+	CGIDIR=${cgidir}
+	CGITMPDIR=\$(DESTDIR)/var/cache/munin-cgi
+	CGIUSER=${cgiuser}
+	DBDIR=\$(DESTDIR)/var/lib/munin
+	DBDIRNODE=\$(DESTDIR)/var/lib/munin-node
+	SPOOLDIR=\$(DESTDIR)/var/spool/munin-async
+	LOGDIR=\$(DESTDIR)/var/log/munin
+	PERLLIB=\$(DESTDIR)$(perl -V:vendorlib | cut -d"'" -f2)
+	JCVALID=$(usex java yes no)
+	STATEDIR=\$(DESTDIR)/run/munin
+	EOF
+}
+
+# parallel make and install need to be fixed before, and I haven't
+# gotten around to do so yet.
+src_compile() {
+	emake -j1
+	use doc && emake -C doc html
+}
+
+src_test() {
+	if [[ ${EUID} == 0 ]]; then
+		eerror "You cannot run tests as root."
+		eerror "Please enable FEATURES=userpriv before proceeding."
+		return 1
+	fi
+
+	local testtargets="test-common test-node test-plugins"
+	use minimal || testtargets+=" test-master"
+
+	LC_ALL=C emake -j1 ${testtargets}
+}
+
+src_install() {
+	local dirs="
+		/var/log/munin
+		/var/lib/munin/plugin-state
+		/var/lib/munin-node/plugin-state
+		/var/www/localhost/htdocs/munin
+		/etc/munin/plugin-conf.d
+		/etc/munin/plugins"
+	use minimal || dirs+=" /etc/munin/munin-conf.d/"
+
+	keepdir ${dirs}
+	fowners munin:munin ${dirs}
+
+	# parallel install doesn't work and it's also pointless to have this
+	# run in parallel for now (because it uses internal loops).
+	emake -j1 CHOWN=true DESTDIR="${D}" $(usex minimal "install-minimal install-man" install)
+
+	# we remove /run from the install, as it's not the package's to deal
+	# with.
+	rm -rf "${D}"/run || die
+
+	# remove the plugins for non-Gentoo package managers; use -f so that
+	# it doesn't fail when installing on non-Linux platforms.
+	rm -f "${D}"/usr/libexec/munin/plugins/{apt{,_all},yum} || die
+
+	insinto /etc/munin/plugin-conf.d/
+	newins "${FILESDIR}"/${PN}-1.3.2-plugins.conf munin-node
+
+	newinitd "${FILESDIR}"/munin-node_init.d_2.0.19 munin-node
+	newconfd "${FILESDIR}"/munin-node_conf.d_1.4.6-r2 munin-node
+
+	newinitd "${FILESDIR}"/munin-asyncd.init.2 munin-asyncd
+
+	dodir /usr/lib/tmpfiles.d
+	cat > "${D}"/usr/lib/tmpfiles.d/${CATEGORY}:${PN}:${SLOT}.conf <<- EOF
+	d /run/munin 0700 munin munin - -
+	EOF
+
+	systemd_dounit "${FILESDIR}"/munin-async.service
+	systemd_dounit "${FILESDIR}"/munin-graph.{service,socket}
+	systemd_dounit "${FILESDIR}"/munin-html.{service,socket}
+	systemd_dounit "${FILESDIR}"/munin-node.service
+
+	cat >> "${T}"/munin.env <<- EOF
+	CONFIG_PROTECT=/var/spool/munin-async/.ssh
+	EOF
+	newenvd "${T}"/munin.env 50munin
+
+	dodoc README ChangeLog INSTALL
+	if use doc; then
+		cd "${S}"/doc/_build/html || die
+		docinto html
+		dodoc -r *
+		cd "${S}" || die
+	fi
+
+	dodir /etc/logrotate.d/
+	sed -e "s:@CGIUSER@:$(usex apache2 apache munin):g" \
+		"${FILESDIR}"/logrotate.d-munin.3 > "${D}"/etc/logrotate.d/munin
+
+	dosym ipmi_ /usr/libexec/munin/plugins/ipmi_sensor_
+
+	if use syslog; then
+		sed -i -e '/log_file/s| .*| Sys::Syslog|' \
+			"${D}"/etc/munin/munin-node.conf || die
+	fi
+
+	# Use a simpler pid file to avoid trouble with /run in tmpfs. The
+	# munin-node service is ran as user root, and only later drops
+	# privileges.
+	sed -i -e 's:/run/munin/munin-node.pid:/run/munin-node.pid:' \
+		"${D}"/etc/munin/munin-node.conf || die
+
+	keepdir /var/spool/munin-async/.ssh
+	touch "${D}"/var/spool/munin-async/.ssh/authorized_keys
+	fowners munin-async:munin /var/spool/munin-async{,/.ssh/{,authorized_keys}}
+	fperms 0750 /var/spool/munin-async{,/.ssh}
+	fperms 0600 /var/spool/munin-async/.ssh/authorized_keys
+
+	if use minimal; then
+		# This requires the presence of munin-update, which is part of
+		# the non-minimal install...
+		rm "${D}"/usr/libexec/munin/plugins/munin_stats
+	else
+		# remove font files so that we don't have to keep them around
+		rm "${D}"/usr/libexec/${PN}/*.ttf || die
+
+		if use cgi; then
+			sed -i -e '/#graph_strategy cgi/s:^#::' "${D}"/etc/munin/munin.conf || die
+
+			keepdir /var/cache/munin-cgi
+			touch "${D}"/var/log/munin/munin-cgi-{graph,html}.log
+			fowners $(usex apache2 apache munin) \
+				/var/cache/munin-cgi \
+				/var/log/munin/munin-cgi-{graph,html}.log
+
+			if use apache2; then
+				insinto /etc/apache2/vhosts.d
+				newins "${FILESDIR}"/munin.apache.include munin.include
+				newins "${FILESDIR}"/munin.apache.include-2.4 munin-2.4.include
+			fi
+		else
+			sed \
+				-e '/#graph_strategy cgi/s:#graph_strategy cgi:graph_strategy cron:' \
+				-i "${D}"/etc/munin/munin.conf || die
+		fi
+
+		keepdir /var/lib/munin/.ssh
+		cat >> "${D}"/var/lib/munin/.ssh/config <<- EOF
+		IdentityFile /var/lib/munin/.ssh/id_ecdsa
+		IdentityFile /var/lib/munin/.ssh/id_rsa
+		EOF
+
+		fowners munin:munin /var/lib/munin/.ssh/{,config}
+		fperms go-rwx /var/lib/munin/.ssh/{,config}
+
+		dodir /usr/share/${PN}
+		cat >> "${D}"/usr/share/${PN}/crontab <<- EOF
+		# Force the shell to bash
+		SHELL=/bin/bash
+		# Mail reports to root@, not munin@
+		MAILTO=root
+
+		# This runs the munin task every 5 minutes.
+		*/5	* * * *		/usr/bin/munin-cron
+
+		# Alternatively, this route works differently
+		# Update once a minute (for busy sites)
+		#*/1 * * * *		/usr/libexec/munin/munin-update
+		## Check for limit excess every 2 minutes
+		#*/2 * * * *		/usr/libexec/munin/munin-limits
+		## Update graphs every 5 minutes
+		#*/5 * * * *		nice /usr/libexec/munin/munin-graph
+		## Update HTML pages every 15 minutes
+		#*/15 * * * *		nice /usr/libexec/munin/munin-html
+		EOF
+
+		cat >> "${D}"/usr/share/${PN}/fcrontab <<- EOF
+		# Mail reports to root@, not munin@, only execute one at a time
+		!mailto(root),serial(true)
+
+		# This runs the munin task every 5 minutes.
+		@ 5		/usr/bin/munin-cron
+
+		# Alternatively, this route works differently
+		# Update once a minute (for busy sites)
+		#@ 1	/usr/libexec/munin/munin-update
+		## Check for limit excess every 2 minutes
+		#@ 2	/usr/libexec/munin/munin-limits
+		## Update graphs every 5 minutes
+		#@ 5	nice /usr/libexec/munin/munin-graph
+		## Update HTML pages every 15 minutes
+		#@ 15	nice /usr/libexec/munin/munin-html
+		EOF
+
+		# remove .htaccess file
+		find "${D}" -name .htaccess -delete || die
+	fi
+}
+
+pkg_config() {
+	if use minimal; then
+		einfo "Nothing to do."
+		return 0
+	fi
+
+	einfo "Press enter to install the default crontab for the munin master"
+	einfo "installation from /usr/share/${PN}/f?crontab"
+	einfo "If you have a large site, you may wish to customize it."
+	read
+
+	ebegin "Setting up cron ..."
+	if has_version sys-process/fcron; then
+		fcrontab - -u munin < /usr/share/${PN}/fcrontab
+	else
+		# dcron is very fussy about syntax
+		# the following is the only form that works in BOTH dcron and vixie-cron
+		crontab - -u munin < /usr/share/${PN}/crontab
+	fi
+	eend $?
+
+	einfo "Press enter to set up the SSH keys used for SSH transport"
+	read
+
+	# generate one rsa (for legacy) and one ecdsa (for new systems)
+	ssh-keygen -t rsa \
+		-f /var/lib/munin/.ssh/id_rsa -N '' \
+		-C "created by portage for ${CATEGORY}/${PN}" || die
+	ssh-keygen -t ecdsa \
+		-f /var/lib/munin/.ssh/id_ecdsa -N '' \
+		-C "created by portage for ${CATEGORY}/${PN}" || die
+	chown -R munin:munin /var/lib/munin/.ssh || die
+	chmod 0600 /var/lib/munin/.ssh/id_{rsa,ecdsa} || die
+
+	einfo "Your public keys are available in "
+	einfo "  /var/lib/munin/.ssh/id_rsa.pub"
+	einfo "  /var/lib/munin/.ssh/id_ecdsa.pub"
+	einfo "and follows for convenience"
+	echo
+	cat /var/lib/munin/.ssh/id_*.pub
+}
+
+pkg_postinst() {
+	elog "Please follow the munin documentation to set up the plugins you"
+	elog "need, afterwards start munin-node."
+	elog ""
+	elog "To make use of munin-async, make sure to set up the corresponding"
+	elog "SSH key in /var/lib/munin-async/.ssh/authorized_keys"
+	elog ""
+	if ! use minimal; then
+		elog "Please run"
+		elog "  emerge --config net-analyzer/munin"
+		elog "to automatically configure munin's cronjobs as well as generate"
+		elog "passwordless SSH keys to be used with munin-async."
+	fi
+	elog ""
+	elog "Further information about setting up Munin in Gentoo can be found"
+	elog "in the Gentoo Wiki: https://wiki.gentoo.org/wiki/Munin"
+
+	if use cgi; then
+		chown $(usex apache2 apache munin) \
+			"${ROOT}"/var/cache/munin-cgi \
+			"${ROOT}"/var/log/munin/munin-cgi-{graph,html}.log
+
+		if use apache2; then
+			elog "To use Munin with CGI you should include /etc/apache2/vhosts.d/munin.include"
+			elog "or /etc/apache2/vhosts.d/munin-2.4.include (for Apache 2.4) from the virtual"
+			elog "host you want it to be served."
+			elog "If you want to enable CGI-based HTML as well, you have to add to"
+			elog "/etc/conf.d/apache2 the option -D MUNIN_HTML_CGI."
+		else
+			elog "Effective CGI support has just been added in 2.0.7-r6."
+			elog "Documentation on how to use it is still sparse."
+		fi
+	fi
+
+	# we create this here as we don't want Portage to check /run
+	# symlinks but we still need this to be present before the reboot.
+	if ! use minimal && ! [[ -d "${ROOT}"/run/munin ]]; then
+		mkdir "${ROOT}"/run/munin
+		chown munin:munin "${ROOT}"/run/munin
+		chmod 0700 "${ROOT}"/run/munin
+	fi
+}
-- 
cgit v1.2.3-65-gdbad