From 62bdc2afcddcfeca86061c3ac2e9d1d2b627a1d6 Mon Sep 17 00:00:00 2001 From: Daniel Pielmeier Date: Mon, 24 Oct 2016 19:24:14 +0200 Subject: net-print/hplip: Remove old. Package-Manager: portage-2.3.0 --- net-print/hplip/Manifest | 3 - net-print/hplip/hplip-3.14.10.ebuild | 266 ---------------------------------- net-print/hplip/hplip-3.16.8.ebuild | 268 ----------------------------------- net-print/hplip/hplip-3.16.9.ebuild | 268 ----------------------------------- 4 files changed, 805 deletions(-) delete mode 100644 net-print/hplip/hplip-3.14.10.ebuild delete mode 100644 net-print/hplip/hplip-3.16.8.ebuild delete mode 100644 net-print/hplip/hplip-3.16.9.ebuild (limited to 'net-print') diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest index 808f76d5ec8d..90ca31ae85c7 100644 --- a/net-print/hplip/Manifest +++ b/net-print/hplip/Manifest @@ -1,7 +1,4 @@ -DIST hplip-3.14.10-patches-1.tar.xz 8140 SHA256 33116a5e2c104495d60f0b15e923b2ae5eaaf269cd5ee8e988b035eb20aa23ab SHA512 a8deb03979c55b660ef299505afc328fc930786ea9d473109a9fafd83d72528a9c3700faf4742f2e05829824fc97c3656538e1a607e2191e617f3944f0482e9a WHIRLPOOL bbf5d62f29c0fb0162f34b7815fc190459c619fdaf4f96e33d085f9b7228fa5431b6d668322256995a0a1d16aa1cccb75171000bbb2334ad3b51fec47f2653c0 -DIST hplip-3.14.10.tar.gz 21773429 SHA256 11b3cd8311dea6b22a4c80be1e5d021e84d15a5f3e7e22cbd43798e5c1a89598 SHA512 ed184c8d0d3d8d5aad454831013d7c5e0b1685b088ee8099b6efc1b152f8b159a2349f23f0c5c77a7a5f1a48165b0e22f2ff83ced1beb14633bd278d4ef4d6dc WHIRLPOOL 8e1985cfd370849db96765f792655da36e22b6cecb660dd4707b0ff33dd53c8b66b2ec73a9596c7e60036edc1843c195bbbde64f37c5a1c319752bf0ebc08eb6 DIST hplip-3.16.2-patches-1.tar.xz 8188 SHA256 8a9a78e0caac1731eae79f047a6054b411c237c579fdfd07bc59d435db708705 SHA512 7eb03c093cfb9ef6b9a980ef5520575310d080c45ed13191933a5facaf9bbb04b38c8381762a3ecd33884ad582830e61e17b6c17f2ed7cdf910670e05eed2510 WHIRLPOOL 6721eac17977485eae0cb22b1702d0479003e3639e806ecd3c5888f1b5015a0bf904512104ebefee4b3d5f64abebd0608090e00310ec8d5b48f210c7e4a95e4e DIST hplip-3.16.3.tar.gz 22408596 SHA256 42d2302ee38bda41caa0f2f9524a91f531e3aa432814ffd45b3e5c396dc30194 SHA512 32d2f88c0983208e77592f73bf65cf2900cd6aa234d09220a18b45b5fc4bd0d10e9cfc8c7a10639e5a51ad5f5d0f8ed7bd477d08c86b89c633a1bbcd42682915 WHIRLPOOL b287ecf80c2e7b0da0de0afefcf60c507f9d42c74dbba1e745b4b43f253a5b0dedb6398a1f073e14d196296da47764e983138c0151e05bfc7a5dd416458662a0 DIST hplip-3.16.5-patches-1.tar.xz 8200 SHA256 98866e57a247e7a30d9cd584ed9411aa79a6185294a73b4cc5961efe9a5e5fa6 SHA512 36d33da5fc4105183cbc5137845ddccd8ab2b6abbff053a3a51f3da61c26c2d9d48dcb735345fb453abd67b6a0797aa337102c366cce037bc7006599b20b1646 WHIRLPOOL 8ac91bdefeb177c092b1d6de16474e8e1da57ad046dbc579f14fd40a27d1837d9bf142573137ef8d91c37dc7b03ca908fd5bfad23a9815af2015b521091c2700 -DIST hplip-3.16.8.tar.gz 22942175 SHA256 a9da67ae51c17487a8d725eb9c0bf9c6f0416e1fffa7db6cdff5302b1c556ceb SHA512 213a39739834eca4e8b247706394cbeb6cf4ada547711d7b3e9187a43e8da8988b1b3efebdffb709cb73bc9ca863200d1405297d5797260eafae6a68531dc15f WHIRLPOOL ce6c00b8602589c7c16e6e6efb4ac47999c45f95519817f728be2bcdc1269916a5ff6e1f67a45a8f51cd16834ecdf599dfbd0ac18946aa68532b286560ba9956 DIST hplip-3.16.9.tar.gz 23057361 SHA256 cc8cf2a7baa1403cddd6503f120c58780c786b42fad073da6caec7535d3797a6 SHA512 801bf6578759b1204eb8ede376ee0a22a12c7821ceafeb8c84a2aa5596bfccef222a15af896c33ba46c53b3e4776629efee264b6d67487cbf197b028d22b68ff WHIRLPOOL 3374e43630a39c245541180ac9e6b76431687f5b977271a4bc09cd8de897bfc992ab43ab5235bb4806da33a65d22aeb0ea2783fa52501aaafdd142e229621492 diff --git a/net-print/hplip/hplip-3.14.10.ebuild b/net-print/hplip/hplip-3.14.10.ebuild deleted file mode 100644 index c14e24c5d287..000000000000 --- a/net-print/hplip/hplip-3.14.10.ebuild +++ /dev/null @@ -1,266 +0,0 @@ -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -PYTHON_COMPAT=( python2_7 ) -PYTHON_REQ_USE="threads,xml" - -inherit eutils fdo-mime linux-info python-single-r1 udev autotools toolchain-funcs - -DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools" -HOMEPAGE="http://hplipopensource.com/hplip-web/index.html" -SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz - https://dev.gentoo.org/~billie/distfiles/${PN}-3.14.10-patches-1.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="amd64 arm ppc ppc64 x86" - -# zeroconf does not work properly with >=cups-1.4. -# Thus support for it is also disabled in hplip. -IUSE="doc fax +hpcups hpijs kde libnotify -libusb0 minimal parport policykit qt4 scanner snmp static-ppds X" - -# TODO: check if net-print/cups, net-analyzer/net-snmp -# are migrated to python-r1 - -COMMON_DEPEND=" - virtual/jpeg:0 - hpijs? ( - || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] ) - ) - !minimal? ( - ${PYTHON_DEPS} - >=net-print/cups-1.4.0 - !libusb0? ( virtual/libusb:1 ) - libusb0? ( virtual/libusb:0 ) - scanner? ( >=media-gfx/sane-backends-1.0.19-r1 ) - fax? ( >=sys-apps/dbus-1.6.8-r1 ) - snmp? ( - net-analyzer/net-snmp - dev-libs/openssl:0 - ) - )" - -DEPEND="${COMMON_DEPEND} - virtual/pkgconfig" - -RDEPEND="${COMMON_DEPEND} - >=app-text/ghostscript-gpl-8.71-r3 - policykit? ( - sys-auth/polkit - ) - !minimal? ( - >=dev-python/dbus-python-1.1.1-r1[${PYTHON_USEDEP}] - >=dev-python/pygobject-2.28.6-r53:2[${PYTHON_USEDEP}] - kernel_linux? ( virtual/udev !=dev-python/reportlab-2.6[${PYTHON_USEDEP}] - >=dev-python/pillow-1[${PYTHON_USEDEP}] - X? ( || ( - kde? ( kde-misc/skanlite ) - media-gfx/xsane - media-gfx/sane-frontends - ) ) - ) - fax? ( - >=dev-python/reportlab-2.6[${PYTHON_USEDEP}] - >=dev-python/dbus-python-1.1.1-r1[${PYTHON_USEDEP}] - ) - qt4? ( - >=dev-python/PyQt4-4.9.6-r2[dbus,X,${PYTHON_USEDEP}] - libnotify? ( - >=dev-python/notify-python-0.1.1-r3[${PYTHON_USEDEP}] - ) - ) - )" - -REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )" - -CONFIG_CHECK="~PARPORT ~PPDEV" -ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)." - -pkg_setup() { - use !minimal && python-single-r1_pkg_setup - - ! use qt4 && ewarn "You need USE=qt4 for the hplip GUI." - - use scanner && ! use X && ewarn "You need USE=X for the scanner GUI." - - if ! use hpcups && ! use hpijs ; then - ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver," - ewarn "which is probably not what you want." - ewarn "You will almost certainly not be able to print." - fi - - if use minimal ; then - ewarn "Installing driver portions only, make sure you know what you are doing." - ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver" - ewarn "is installed. If both USE flags are set hpijs overrides hpcups." - else - use parport && linux-info_pkg_setup - fi -} - -src_prepare() { - if use !minimal ; then - python_export EPYTHON PYTHON - python_fix_shebang . - fi - - EPATCH_SUFFIX="patch" \ - EPATCH_FORCE="yes" \ - epatch "${WORKDIR}" - - # Make desktop files follow the specification - # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324 - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Encoding=.*/d' hplip.desktop.in || die - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Version=.*/d' \ - -e '/^Comment=.*/d' hplip-systray.desktop.in || die - - # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847, - # https://bugs.launchpad.net/hplip/+bug/500086 - local udevdir=$(get_udevdir) - sed -i -e "s|/etc/udev|${udevdir}|g" \ - $(find . -type f -exec grep -l /etc/udev {} +) || die - - # Force recognition of Gentoo distro by hp-check - sed -i \ - -e "s:file('/etc/issue', 'r').read():'Gentoo':" \ - installer/core_install.py || die - - # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip - # The hpcups driver does not use foomatic-rip - local i - for i in ppd/hpijs/*.ppd.gz ; do - rm -f ${i}.temp || die - gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \ - gzip > ${i}.temp || die - mv ${i}.temp ${i} || die - done - - eautoreconf -} - -src_configure() { - local myconf drv_build minimal_build - - if use fax || use qt4 ; then - myconf="${myconf} --enable-dbus-build" - else - myconf="${myconf} --disable-dbus-build" - fi - - if use libusb0 ; then - myconf="${myconf} --enable-libusb01_build" - else - myconf="${myconf} --disable-libusb01_build" - fi - - if use hpcups ; then - drv_build="$(use_enable hpcups hpcups-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-cups-ppd-install" - drv_build="${drv_build} --disable-cups-drv-install" - else - drv_build="${drv_build} --enable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - else - drv_build="--disable-hpcups-install" - drv_build="${drv_build} --disable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - - if use hpijs ; then - drv_build="${drv_build} $(use_enable hpijs hpijs-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-foomatic-ppd-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - else - drv_build="${drv_build} --enable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - else - drv_build="${drv_build} --disable-hpijs-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - - if use minimal ; then - if use hpijs ; then - minimal_build="--enable-hpijs-only-build" - else - minimal_build="--disable-hpijs-only-build" - fi - if use hpcups ; then - minimal_build="${minimal_build} --enable-hpcups-only-build" - else - minimal_build="${minimal_build} --disable-hpcups-only-build" - fi - fi - - econf \ - --disable-cups11-build \ - --disable-lite-build \ - --disable-foomatic-rip-hplip-install \ - --disable-shadow-build \ - --disable-qt3 \ - --disable-udev_sysfs_rules \ - --with-cupsbackenddir=$(cups-config --serverbin)/backend \ - --with-cupsfilterdir=$(cups-config --serverbin)/filter \ - --with-docdir=/usr/share/doc/${PF} \ - --with-htmldir=/usr/share/doc/${PF}/html \ - ${myconf} \ - ${drv_build} \ - ${minimal_build} \ - $(use_enable doc doc-build) \ - $(use_enable fax fax-build) \ - $(use_enable parport pp-build) \ - $(use_enable scanner scan-build) \ - $(use_enable snmp network-build) \ - $(use_enable qt4 gui-build) \ - $(use_enable qt4) \ - $(use_enable policykit) -} - -src_install() { - default - - # Installed by sane-backends - # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023 - rm -f "${D}"/etc/sane.d/dll.conf || die - - rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die - rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die - - # Remove hal fdi files - rm -rf "${D}"/usr/share/hal || die - - prune_libtool_files --all - - if use !minimal ; then - python_export EPYTHON PYTHON - python_optimize "${D}"/usr/share/hplip - fi -} - -pkg_postinst() { - if [[ -z "${REPLACING_VERSIONS}" ]]; then - elog "For more information on setting up your printer please take" - elog "a look at the hplip section of the gentoo printing guide:" - elog "https://wiki.gentoo.org/wiki/Printing" - elog - elog "Any user who wants to print must be in the lp group." - elog - elog "Please note: Printers requiring a binary plugin are currently" - elog "not supported. All bugs regarding the plugin are most likely" - elog "closed. A bug about including the plugin package to gentoo is" - elog "available here: https://bugs.gentoo.org/352439" - fi -} diff --git a/net-print/hplip/hplip-3.16.8.ebuild b/net-print/hplip/hplip-3.16.8.ebuild deleted file mode 100644 index e991e1ff1018..000000000000 --- a/net-print/hplip/hplip-3.16.8.ebuild +++ /dev/null @@ -1,268 +0,0 @@ -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=6 - -PYTHON_COMPAT=( python{2_7,3_3,3_4} ) -PYTHON_REQ_USE="threads,xml" - -inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools - -DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools" -HOMEPAGE="http://hplipopensource.com/hplip-web/index.html" -SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz - https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86" - -IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X" - -# dependency on dev-python/notify-python dropped due to python 3 incompatibility -# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree - -COMMON_DEPEND=" - virtual/jpeg:0 - hpijs? ( - || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] ) - ) - >=net-print/cups-1.4.0 - !minimal? ( - ${PYTHON_DEPS} - !libusb0? ( virtual/libusb:1 ) - libusb0? ( virtual/libusb:0 ) - scanner? ( >=media-gfx/sane-backends-1.0.19-r1 ) - fax? ( >=sys-apps/dbus-1.6.8-r1 ) - snmp? ( - net-analyzer/net-snmp - dev-libs/openssl:0 - ) - )" - -DEPEND="${COMMON_DEPEND} - virtual/pkgconfig" - -RDEPEND="${COMMON_DEPEND} - >=app-text/ghostscript-gpl-8.71-r3 - policykit? ( sys-auth/polkit ) - !minimal? ( - >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}] - dev-python/pygobject[${PYTHON_USEDEP}] - kernel_linux? ( virtual/udev ) - scanner? ( - >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] - >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}] - X? ( || ( - kde? ( kde-misc/skanlite ) - media-gfx/xsane - media-gfx/sane-frontends - ) ) - ) - fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] ) - qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] ) - qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] ) - )" - -REQUIRED_USE=" - !minimal? ( ${PYTHON_REQUIRED_USE} ) - !minimal? ( qt4? ( !qt5 ) ) -" - -CONFIG_CHECK="~PARPORT ~PPDEV" -ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)." - -#DISABLE_AUTOFORMATTING="yes" -DOC_CONTENTS=" -For more information on setting up your printer please take -a look at the hplip section of the gentoo printing guide: -https://wiki.gentoo.org/wiki/Printing - -Any user who wants to print must be in the lp group. -" - -pkg_setup() { - use !minimal && python-single-r1_pkg_setup - - ! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI." - - use scanner && ! use X && ewarn "You need USE=X for the scanner GUI." - - if ! use hpcups && ! use hpijs ; then - ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver," - ewarn "which is probably not what you want." - ewarn "You will almost certainly not be able to print." - fi - - if use minimal ; then - ewarn "Installing driver portions only, make sure you know what you are doing." - ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver" - ewarn "is installed. If both USE flags are set hpijs overrides hpcups." - else - use parport && linux-info_pkg_setup - fi -} - -src_prepare() { - eapply "${WORKDIR}/patches" - - default - - if use !minimal ; then - python_export EPYTHON PYTHON - python_fix_shebang . - fi - - # Make desktop files follow the specification - # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324 - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Encoding=.*/d' hplip.desktop.in || die - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Version=.*/d' \ - -e '/^Comment=.*/d' hplip-systray.desktop.in || die - - # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847, - # https://bugs.launchpad.net/hplip/+bug/500086 - local udevdir=$(get_udevdir) - sed -i -e "s|/etc/udev|${udevdir}|g" \ - $(find . -type f -exec grep -l /etc/udev {} +) || die - - # Force recognition of Gentoo distro by hp-check - sed -i \ - -e "s:file('/etc/issue', 'r').read():'Gentoo':" \ - installer/core_install.py || die - - # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip - # The hpcups driver does not use foomatic-rip - local i - for i in ppd/hpijs/*.ppd.gz ; do - rm -f ${i}.temp || die - gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \ - gzip > ${i}.temp || die - mv ${i}.temp ${i} || die - done - - eautoreconf -} - -src_configure() { - local myconf drv_build minimal_build - - if use qt4 || use qt5 ; then - myconf="${myconf} --enable-gui-build" - else - myconf="${myconf} --disable-gui-build" - fi - - if use fax || use qt4 || use qt5 ; then - myconf="${myconf} --enable-dbus-build" - else - myconf="${myconf} --disable-dbus-build" - fi - - if use libusb0 ; then - myconf="${myconf} --enable-libusb01_build" - else - myconf="${myconf} --disable-libusb01_build" - fi - - if use hpcups ; then - drv_build="$(use_enable hpcups hpcups-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-cups-ppd-install" - drv_build="${drv_build} --disable-cups-drv-install" - else - drv_build="${drv_build} --enable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - else - drv_build="--disable-hpcups-install" - drv_build="${drv_build} --disable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - - if use hpijs ; then - drv_build="${drv_build} $(use_enable hpijs hpijs-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-foomatic-ppd-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - else - drv_build="${drv_build} --enable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - else - drv_build="${drv_build} --disable-hpijs-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - - if use minimal ; then - if use hpijs ; then - minimal_build="--enable-hpijs-only-build" - else - minimal_build="--disable-hpijs-only-build" - fi - if use hpcups ; then - minimal_build="${minimal_build} --enable-hpcups-only-build" - else - minimal_build="${minimal_build} --disable-hpcups-only-build" - fi - fi - - econf \ - --disable-cups11-build \ - --disable-lite-build \ - --disable-foomatic-rip-hplip-install \ - --disable-shadow-build \ - --disable-qt3 \ - --disable-udev_sysfs_rules \ - --with-cupsbackenddir=$(cups-config --serverbin)/backend \ - --with-cupsfilterdir=$(cups-config --serverbin)/filter \ - --with-docdir=/usr/share/doc/${PF} \ - --with-htmldir=/usr/share/doc/${PF}/html \ - ${myconf} \ - ${drv_build} \ - ${minimal_build} \ - $(use_enable doc doc-build) \ - $(use_enable fax fax-build) \ - $(use_enable parport pp-build) \ - $(use_enable scanner scan-build) \ - $(use_enable snmp network-build) \ - $(use_enable qt4) \ - $(use_enable qt5) \ - $(use_enable policykit) -} - -src_install() { - # disable parallel install - # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018 - emake -j1 DESTDIR="${D}" install - einstalldocs - # default - - # Installed by sane-backends - # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023 - rm -f "${D}"/etc/sane.d/dll.conf || die - - rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die - rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die - - # Remove hal fdi files - rm -rf "${D}"/usr/share/hal || die - - prune_libtool_files --all - - if use !minimal ; then - python_export EPYTHON PYTHON - python_optimize "${D}"/usr/share/hplip - fi - - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog -} diff --git a/net-print/hplip/hplip-3.16.9.ebuild b/net-print/hplip/hplip-3.16.9.ebuild deleted file mode 100644 index e991e1ff1018..000000000000 --- a/net-print/hplip/hplip-3.16.9.ebuild +++ /dev/null @@ -1,268 +0,0 @@ -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=6 - -PYTHON_COMPAT=( python{2_7,3_3,3_4} ) -PYTHON_REQ_USE="threads,xml" - -inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools - -DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools" -HOMEPAGE="http://hplipopensource.com/hplip-web/index.html" -SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz - https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86" - -IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X" - -# dependency on dev-python/notify-python dropped due to python 3 incompatibility -# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree - -COMMON_DEPEND=" - virtual/jpeg:0 - hpijs? ( - || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] ) - ) - >=net-print/cups-1.4.0 - !minimal? ( - ${PYTHON_DEPS} - !libusb0? ( virtual/libusb:1 ) - libusb0? ( virtual/libusb:0 ) - scanner? ( >=media-gfx/sane-backends-1.0.19-r1 ) - fax? ( >=sys-apps/dbus-1.6.8-r1 ) - snmp? ( - net-analyzer/net-snmp - dev-libs/openssl:0 - ) - )" - -DEPEND="${COMMON_DEPEND} - virtual/pkgconfig" - -RDEPEND="${COMMON_DEPEND} - >=app-text/ghostscript-gpl-8.71-r3 - policykit? ( sys-auth/polkit ) - !minimal? ( - >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}] - dev-python/pygobject[${PYTHON_USEDEP}] - kernel_linux? ( virtual/udev ) - scanner? ( - >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] - >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}] - X? ( || ( - kde? ( kde-misc/skanlite ) - media-gfx/xsane - media-gfx/sane-frontends - ) ) - ) - fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] ) - qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] ) - qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] ) - )" - -REQUIRED_USE=" - !minimal? ( ${PYTHON_REQUIRED_USE} ) - !minimal? ( qt4? ( !qt5 ) ) -" - -CONFIG_CHECK="~PARPORT ~PPDEV" -ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)." - -#DISABLE_AUTOFORMATTING="yes" -DOC_CONTENTS=" -For more information on setting up your printer please take -a look at the hplip section of the gentoo printing guide: -https://wiki.gentoo.org/wiki/Printing - -Any user who wants to print must be in the lp group. -" - -pkg_setup() { - use !minimal && python-single-r1_pkg_setup - - ! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI." - - use scanner && ! use X && ewarn "You need USE=X for the scanner GUI." - - if ! use hpcups && ! use hpijs ; then - ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver," - ewarn "which is probably not what you want." - ewarn "You will almost certainly not be able to print." - fi - - if use minimal ; then - ewarn "Installing driver portions only, make sure you know what you are doing." - ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver" - ewarn "is installed. If both USE flags are set hpijs overrides hpcups." - else - use parport && linux-info_pkg_setup - fi -} - -src_prepare() { - eapply "${WORKDIR}/patches" - - default - - if use !minimal ; then - python_export EPYTHON PYTHON - python_fix_shebang . - fi - - # Make desktop files follow the specification - # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324 - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Encoding=.*/d' hplip.desktop.in || die - sed -i -e '/^Categories=/s/Application;//' \ - -e '/^Version=.*/d' \ - -e '/^Comment=.*/d' hplip-systray.desktop.in || die - - # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725 - # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847, - # https://bugs.launchpad.net/hplip/+bug/500086 - local udevdir=$(get_udevdir) - sed -i -e "s|/etc/udev|${udevdir}|g" \ - $(find . -type f -exec grep -l /etc/udev {} +) || die - - # Force recognition of Gentoo distro by hp-check - sed -i \ - -e "s:file('/etc/issue', 'r').read():'Gentoo':" \ - installer/core_install.py || die - - # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip - # The hpcups driver does not use foomatic-rip - local i - for i in ppd/hpijs/*.ppd.gz ; do - rm -f ${i}.temp || die - gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \ - gzip > ${i}.temp || die - mv ${i}.temp ${i} || die - done - - eautoreconf -} - -src_configure() { - local myconf drv_build minimal_build - - if use qt4 || use qt5 ; then - myconf="${myconf} --enable-gui-build" - else - myconf="${myconf} --disable-gui-build" - fi - - if use fax || use qt4 || use qt5 ; then - myconf="${myconf} --enable-dbus-build" - else - myconf="${myconf} --disable-dbus-build" - fi - - if use libusb0 ; then - myconf="${myconf} --enable-libusb01_build" - else - myconf="${myconf} --disable-libusb01_build" - fi - - if use hpcups ; then - drv_build="$(use_enable hpcups hpcups-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-cups-ppd-install" - drv_build="${drv_build} --disable-cups-drv-install" - else - drv_build="${drv_build} --enable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - else - drv_build="--disable-hpcups-install" - drv_build="${drv_build} --disable-cups-drv-install" - drv_build="${drv_build} --disable-cups-ppd-install" - fi - - if use hpijs ; then - drv_build="${drv_build} $(use_enable hpijs hpijs-install)" - if use static-ppds ; then - drv_build="${drv_build} --enable-foomatic-ppd-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - else - drv_build="${drv_build} --enable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - else - drv_build="${drv_build} --disable-hpijs-install" - drv_build="${drv_build} --disable-foomatic-drv-install" - drv_build="${drv_build} --disable-foomatic-ppd-install" - fi - - if use minimal ; then - if use hpijs ; then - minimal_build="--enable-hpijs-only-build" - else - minimal_build="--disable-hpijs-only-build" - fi - if use hpcups ; then - minimal_build="${minimal_build} --enable-hpcups-only-build" - else - minimal_build="${minimal_build} --disable-hpcups-only-build" - fi - fi - - econf \ - --disable-cups11-build \ - --disable-lite-build \ - --disable-foomatic-rip-hplip-install \ - --disable-shadow-build \ - --disable-qt3 \ - --disable-udev_sysfs_rules \ - --with-cupsbackenddir=$(cups-config --serverbin)/backend \ - --with-cupsfilterdir=$(cups-config --serverbin)/filter \ - --with-docdir=/usr/share/doc/${PF} \ - --with-htmldir=/usr/share/doc/${PF}/html \ - ${myconf} \ - ${drv_build} \ - ${minimal_build} \ - $(use_enable doc doc-build) \ - $(use_enable fax fax-build) \ - $(use_enable parport pp-build) \ - $(use_enable scanner scan-build) \ - $(use_enable snmp network-build) \ - $(use_enable qt4) \ - $(use_enable qt5) \ - $(use_enable policykit) -} - -src_install() { - # disable parallel install - # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018 - emake -j1 DESTDIR="${D}" install - einstalldocs - # default - - # Installed by sane-backends - # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023 - rm -f "${D}"/etc/sane.d/dll.conf || die - - rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die - rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die - - # Remove hal fdi files - rm -rf "${D}"/usr/share/hal || die - - prune_libtool_files --all - - if use !minimal ; then - python_export EPYTHON PYTHON - python_optimize "${D}"/usr/share/hplip - fi - - readme.gentoo_create_doc -} - -pkg_postinst() { - readme.gentoo_print_elog -} -- cgit v1.2.3-65-gdbad