summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--app-misc/lcdproc/files/us2066.patch430
-rw-r--r--app-misc/lcdproc/lcdproc-0.5.6-r2.ebuild201
-rw-r--r--app-misc/lirc-0.9.017
-rw-r--r--app-misc/lirc/files/lircd.service.patch13
4 files changed, 661 insertions, 0 deletions
diff --git a/app-misc/lcdproc/files/us2066.patch b/app-misc/lcdproc/files/us2066.patch
new file mode 100644
index 0000000..426cc33
--- /dev/null
+++ b/app-misc/lcdproc/files/us2066.patch
@@ -0,0 +1,430 @@
+--- lcdproc-0.5.6/server/drivers/hd44780-i2c.c 2010-12-27 06:32:57.000000000 -0700
++++ RPi-OLED-Display-SSD1311/hd44780-i2c.c 2015-07-09 22:52:19.193298735 -0600
+@@ -12,40 +12,6 @@
+ * 1998 Richard Rognlie <rrognlie@gamerz.net>
+ * 1997 Matthias Prinke <m.prinke@trashcan.mcnet.de>
+ *
+- * The connections are:
+- * PCF8574AP LCD
+- * P0 (4) D4 (11)
+- * P1 (5) D5 (12)
+- * P2 (6) D6 (13)
+- * P3 (7) D7 (14)
+- * P4 (9) RS (4)
+- * P5 (10) RW (5)
+- * P6 (11) EN (6)
+- *
+- * Backlight
+- * P7 (12) /backlight (optional, active-low)
+- *
+- * Configuration:
+- * device=/dev/i2c-0 # the device file of the i2c bus
+- * port=0x20 # the i2c address of the i2c port expander
+- *
+- * Attention: Bit 8 of the address given in port is special:
+- * It tells the driver to treat the device as PCA9554 or similar,
+- * a device that needs a 2-byte command, and it will be stripped
+- * off the address.
+- * So we have:
+- * port=0x20..0x27 PCF8574 with A[012]=0..7
+- * port=0x38..0x3f PCF8574A with A[012]=0..7
+- * port=0xa0..0xa7 PCA9554 with A[012]=0..7
+- * port=0xa0..0xa7 PCA9554A with A[012]=0..7
+- *
+- * When using this driver, DON'T load the i2c chip module (e.g. pcf8574),
+- * you only need the i2c bus driver module!
+- *
+- *
+- * Based mostly on the hd44780-4bit module, see there for a complete history.
+- * Suggestions for PCA9554 support from Tonu Samuel <tonu@jes.ee>.
+- *
+ * This file is released under the GNU General Public License. Refer to the
+ * COPYING file distributed with this package.
+ */
+@@ -54,17 +20,26 @@
+ #include "hd44780-low.h"
+
+ #include "report.h"
++#ifdef HAVE_CONFIG_H
++# include "config.h"
++#endif
+ #include <stdio.h>
+ #include <string.h>
+ #include <errno.h>
+ #include <unistd.h>
+ #include <fcntl.h>
+ #include <sys/ioctl.h>
++
++#ifdef HAVE_DEV_IICBUS_IIC_H
++#include <dev/iicbus/iic.h>
++#else /* HAVE_LINUX_I2C_DEV_H */
+ #include <linux/i2c-dev.h>
+ /* I2C_SLAVE is missing in linux/i2c-dev.h from kernel headers of 2.4.x kernels */
+ #ifndef I2C_SLAVE
+ #define I2C_SLAVE 0x0703 /* Change slave address */
+ #endif
++#endif
++
+
+ // Generally, any function that accesses the LCD control lines needs to be
+ // implemented separately for each HW design. This is typically (but not
+@@ -76,9 +51,9 @@
+ void i2c_HD44780_backlight(PrivateData *p, unsigned char state);
+ void i2c_HD44780_close(PrivateData *p);
+
+-#define RS 0x10
+-#define RW 0x20
+-#define EN 0x40
++//#define RS 0x10
++//#define RW 0x20
++//#define EN 0x40
+ #define BL 0x80
+ // note that the above bits are all meant for the data port of PCF8574
+
+@@ -86,21 +61,36 @@
+ #define I2C_PCAX_MASK 0x80
+
+ static void
+-i2c_out(PrivateData *p, unsigned char val)
++i2c_out(PrivateData *p, unsigned char val[2])
+ {
+- __u8 data[2];
++// char data[2];
+ int datalen;
+ static int no_more_errormsgs=0;
+- if (p->port & I2C_PCAX_MASK) { // we have a PCA9554 or similar, that needs a 2-byte command
+- data[0]=1; // command: read/write output port register
+- data[1]=val;
+- datalen=2;
+- } else { // we have a PCF8574 or similar, that needs a 1-byte command
+- data[0]=val;
+- datalen=1;
+- }
+- if (write(p->fd,data,datalen) != datalen) {
+- p->hd44780_functions->drv_report(no_more_errormsgs?RPT_DEBUG:RPT_ERR, "HD44780: I2C: i2c write data %u to address %u failed: %s",
++#ifdef HAVE_DEV_IICBUS_IIC_H
++ struct iiccmd cmd;
++ bzero(&cmd, sizeof(cmd));
++#endif
++
++// if (p->port & I2C_PCAX_MASK) { // we have a PCA9554 or similar, that needs a 2-byte command
++// data[0]=1; // command: read/write output port register
++// data[1]=val;
++ datalen=2;
++// } else { // we have a PCF8574 or similar, that needs a 1-byte command
++// data[0]=val;
++// datalen=1;
++// }
++
++#ifdef HAVE_DEV_IICBUS_IIC_H
++ cmd.slave = (p->port & I2C_ADDR_MASK) << 1;
++ cmd.last = 1;
++ cmd.count = datalen;
++ cmd.buf = val;
++
++ if (ioctl(p->fd, I2CWRITE, &cmd) < 0) {
++#else /* HAVE_LINUX_I2C_DEV_H */
++ if (write(p->fd,val,datalen) != datalen) {
++#endif
++ p->hd44780_functions->drv_report(no_more_errormsgs?RPT_DEBUG:RPT_ERR, "HD44780: I2C: i2c write data %u to address 0x%02X failed: %s",
+ val, p->port & I2C_ADDR_MASK, strerror(errno));
+ no_more_errormsgs=1;
+ }
+@@ -121,8 +111,14 @@
+ PrivateData *p = (PrivateData*) drvthis->private_data;
+ HD44780_functions *hd44780_functions = p->hd44780_functions;
+
+- int enableLines = EN;
++// int enableLines = EN;
+ char device[256] = DEFAULT_DEVICE;
++#ifdef HAVE_DEV_IICBUS_IIC_H
++ struct iiccmd cmd;
++ bzero(&cmd, sizeof(cmd));
++#endif
++
++//###?? p->backlight_bit = BL;
+ p->backlight_bit = BL;
+
+ /* READ CONFIG FILE */
+@@ -130,7 +126,7 @@
+ /* Get serial device to use */
+ strncpy(device, drvthis->config_get_string(drvthis->name, "Device", 0, DEFAULT_DEVICE), sizeof(device));
+ device[sizeof(device)-1] = '\0';
+- report(RPT_INFO,"HD44780: I2C: Using device '%s' and address %u for a %s",
++ report(RPT_INFO,"HD44780: I2C: Using device '%s' and address 0x%02X for a %s",
+ device, p->port & I2C_ADDR_MASK, (p->port & I2C_PCAX_MASK) ? "PCA9554(A)" : "PCF8574(A)");
+
+ // Open the I2C device
+@@ -141,89 +137,125 @@
+ }
+
+ // Set I2C address
++#ifdef HAVE_DEV_IICBUS_IIC_H
++ cmd.slave = (p->port & I2C_ADDR_MASK) << 1;
++ cmd.last = 0;
++ cmd.count = 0;
++ if (ioctl(p->fd, I2CRSTCARD, &cmd) < 0) {
++ report(RPT_ERR, "HD44780: I2C: reset bus failed: %s", strerror(errno));
++ return -1;
++ }
++ if (ioctl(p->fd, I2CSTART, &cmd) < 0) {
++ report(RPT_ERR, "HD44780: I2C: set address to 0x%02X: %s", p->port & I2C_ADDR_MASK, strerror(errno));
++ return -1;
++ }
++#else /* HAVE_LINUX_I2C_DEV_H */
+ if (ioctl(p->fd,I2C_SLAVE, p->port & I2C_ADDR_MASK) < 0) {
+ report(RPT_ERR, "HD44780: I2C: set address to '%i': %s", p->port & I2C_ADDR_MASK, strerror(errno));
+ return(-1);
+ }
+-
+-
+- if (p->port & I2C_PCAX_MASK) { // we have a PCA9554 or similar, that needs special config
+- __u8 data[2];
+- data[0] = 2; // command: set polarity inversion
+- data[1] = 0; // -> no polarity inversion
+- if (write(p->fd,data,2) != 2) {
+- report(RPT_ERR, "HD44780: I2C: i2c set polarity inversion failed: %s", strerror(errno));
+- }
+- data[0] = 3; // command: set output direction
+- data[1] = 0; // -> all pins are outputs
+- if (write(p->fd,data,2) != 2) {
+- report(RPT_ERR, "HD44780: I2C: i2c set output direction failed: %s", strerror(errno));
+- }
+- }
+-
++#endif
+ hd44780_functions->senddata = i2c_HD44780_senddata;
+ hd44780_functions->backlight = i2c_HD44780_backlight;
+ hd44780_functions->close = i2c_HD44780_close;
++ /* Display init */
+
+- // powerup the lcd now
+- /* We'll now send 0x03 a couple of times,
+- * which is in fact (FUNCSET | IF_8BIT) >> 4 */
+- i2c_out(p, 0x03);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+-
+- i2c_out(p, enableLines | 0x03);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+- i2c_out(p, 0x03);
+- hd44780_functions->uPause(p, 15000);
+-
+- i2c_out(p, enableLines | 0x03);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+- i2c_out(p, 0x03);
+- hd44780_functions->uPause(p, 5000);
+-
+- i2c_out(p, enableLines | 0x03);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+- i2c_out(p, 0x03);
+- hd44780_functions->uPause(p, 100);
+-
+- i2c_out(p, enableLines | 0x03);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+- i2c_out(p, 0x03);
+- hd44780_functions->uPause(p, 100);
+-
+- // now in 8-bit mode... set 4-bit mode
+- i2c_out(p, 0x02);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+-
+- i2c_out(p, enableLines | 0x02);
+- if (p->delayBus)
+- hd44780_functions->uPause(p, 1);
+- i2c_out(p, 0x02);
+- hd44780_functions->uPause(p, 100);
+-
+- // Set up two-line, small character (5x8) mode
+- hd44780_functions->senddata(p, 0, RS_INSTR, FUNCSET | IF_4BIT | TWOLINE | SMALLCHAR);
+- hd44780_functions->uPause(p, 40);
+-
+- common_init(p, IF_4BIT);
++ unsigned char data[2];
++ data[0] = 0x80;
++ i2c_out(p, data);
++
++ data[1] = 0x2A; // **** Set "RE"=1<--->00101010B
++ i2c_out(p, data);
++ data[1] = 0x71; //# Function Selection A [71h] (IS = X, RE = 1, SD=0;, 2bajty
++ i2c_out(p, data);
++ data[1] = 0x5C; // 0x5C set Vdd
++ i2c_out(p, data);
++ data[1] = 0x28;
++ i2c_out(p, data);
++
++ data[1] = 0x08; // **** Set Sleep Mode On
++ i2c_out(p, data);
++ data[1] = 0x2A; // **** Set "RE"=1 00101010B
++ i2c_out(p, data);
++ data[1] = 0x79; // **** Set "SD"=1 01111001B
++ i2c_out(p, data);
++
++ data[1] = 0xD5; //# Set Display Clock Divide Ratio/ Oscillator Frequency (D5h
++ i2c_out(p, data);
++ data[1] = 0x70;
++ i2c_out(p, data);
++ data[1] = 0x78; // **** Set "SD"=0
++ i2c_out(p, data);
++
++ data[1] = 0x08; // **** Set 5-dot, 3 or 4 line(0x09;, 1 or 2 line(0x08;
++ i2c_out(p, data);
++
++ data[1] = 0x06; // **** Set Com31-->Com0 Seg0-->Seg99
++ i2c_out(p, data);
++
++ //**** Set OLED Characterization
++ data[1] = 0x2A; // **** Set "RE"=1
++ i2c_out(p, data);
++ data[1] = 0x79; // **** Set "SD"=1
++ i2c_out(p, data);
++
++ // **** CGROM/CGRAM Management *** //
++ data[1] = 0x72; // **** Set ROM
++ i2c_out(p, data);
++ data[1] = 0x00; // **** Set ROM A and 8 CGRAM
++ i2c_out(p, data);
++
++ data[1] = 0xDA; // **** Set Seg Pins HW Config
++ i2c_out(p, data);
++ data[1] = 0x10;
++ i2c_out(p, data);
++
++ //data[1] = 0x81; // **** Set Contrast
++ //i2c_out(p, data);
++ //data[1] = 0x50;
++ //i2c_out(p, data);
++
++ data[1] = 0xDB; // **** Set VCOM deselect level
++ i2c_out(p, data);
++ data[1] = 0x30; // **** VCC x 0.83
++ i2c_out(p, data);
++
++ data[1] = 0xDC; // **** Set gpio - turn EN for 15V generator on.
++ i2c_out(p, data);
++ data[1] = 0x03;
++ i2c_out(p, data);
++
++ data[1] = 0x78; // **** Exiting Set OLED Characterization
++ i2c_out(p, data);
++ data[1] = 0x28;
++ i2c_out(p, data);
++ data[1] = 0x2A;
++ i2c_out(p, data);
++ data[1] = 0x6; // **** Set Entry Mode
++ i2c_out(p, data);
++ data[1] = 0x08;
++ i2c_out(p, data);
++ data[1] = 0x28; // **** Set "IS"=0 , "RE" =0 //28
++ i2c_out(p, data);
++ i2c_out(p, data);
++ data[1] = 0x01;
++ i2c_out(p, data);
++ data[1] = 0x80; // **** Set DDRAM Address to 0x80 (line 1 start;
++ i2c_out(p, data);
++
++ //sleep 0.1s;
++ data[1] = 0x0C; // **** Turn on Display
++ i2c_out(p, data);
+
+ return 0;
+ }
+
+-
+-/**
+- * Close the device.
+- * \param p Pointer to driver's private data structure.
+- */
+ void
+ i2c_HD44780_close(PrivateData *p) {
+ if (p->fd >= 0) {
++#ifdef HAVE_DEV_IICBUS_IIC_H
++ ioctl(p->fd, I2CSTOP);
++#endif
+ close(p->fd);
+ }
+ }
+@@ -239,34 +271,13 @@
+ void
+ i2c_HD44780_senddata(PrivateData *p, unsigned char displayID, unsigned char flags, unsigned char ch)
+ {
+- unsigned char enableLines = 0, portControl = 0;
+- unsigned char h = (ch >> 4) & 0x0f; // high and low nibbles
+- unsigned char l = ch & 0x0f;
+-
++ unsigned char data[2];
+ if (flags == RS_INSTR)
+- portControl = 0;
+- else //if (flags == RS_DATA)
+- portControl = RS;
+-
+- portControl |= p->backlight_bit;
+-
+- enableLines = EN;
+-
+- i2c_out(p, portControl | h);
+- if (p->delayBus)
+- p->hd44780_functions->uPause(p, 1);
+- i2c_out(p, enableLines | portControl | h);
+- if (p->delayBus)
+- p->hd44780_functions->uPause(p, 1);
+- i2c_out(p, portControl | h);
+-
+- i2c_out(p, portControl | l);
+- if (p->delayBus)
+- p->hd44780_functions->uPause(p, 1);
+- i2c_out(p, enableLines | portControl | l);
+- if (p->delayBus)
+- p->hd44780_functions->uPause(p, 1);
+- i2c_out(p, portControl | l);
++ data[0] = 0x80;
++ else
++ data[0] = 0x40;
++ data[1] = ch;
++ i2c_out(p, data);
+ }
+
+
+@@ -277,7 +288,35 @@
+ */
+ void i2c_HD44780_backlight(PrivateData *p, unsigned char state)
+ {
+- p->backlight_bit = ((!p->have_backlight||state) ? 0 : BL);
+
+- i2c_out(p, p->backlight_bit);
++// printf("Backlight %d",state);
++ unsigned char data[2];
++
++ data[0] = 0x80;
++ data[1] = 0x2A;
++ i2c_out(p, data);
++
++// data[0] = 0x80;
++ data[1] = 0x79;
++ i2c_out(p, data);
++
++// data[0] = 0x80;
++ data[1] = 0x81;
++ i2c_out(p, data);
++
++// data[0] = 0x80;
++ if (state)
++ data[1] = 240;
++ else
++ data[1] = 50;
++ i2c_out(p, data);
++
++// data[0] = 0x80;
++ data[1] = 0x78;
++ i2c_out(p, data);
++
++// data[0] = 0x80;
++ data[1] = 0x28;
++ i2c_out(p, data);
++
+ }
diff --git a/app-misc/lcdproc/lcdproc-0.5.6-r2.ebuild b/app-misc/lcdproc/lcdproc-0.5.6-r2.ebuild
new file mode 100644
index 0000000..831463b
--- /dev/null
+++ b/app-misc/lcdproc/lcdproc-0.5.6-r2.ebuild
@@ -0,0 +1,201 @@
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/app-misc/lcdproc/lcdproc-0.5.6-r1.ebuild,v 1.1 2013/04/18 21:10:22 xmw Exp $
+
+EAPI=5
+inherit multilib versionator
+
+MY_PV=$(replace_version_separator 3 '-')
+MY_P=${PN}-${MY_PV}
+S=${WORKDIR}/${MY_P}
+
+DESCRIPTION="Client/Server suite to drive all kinds of LCD (-like) devices"
+HOMEPAGE="http://lcdproc.org/"
+SRC_URI="mirror://sourceforge/${PN}/${MY_P}.tar.gz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~ppc64 ~x86"
+
+IUSE="debug doc ftdi hid irman joystick lirc nfs png samba seamless-hbars truetype usb"
+
+# The following array holds the USE_EXPANDed keywords
+IUSE_LCD_DEVICES=(ncurses bayrad cfontz cfontzpacket
+ cwlinux eyeboxone g15 graphlcd glk
+ hd44780 icpa106 imon imonlcd iowarrior
+ lb216 lcdm001 lcterm
+ md8800 mdm166a ms6931 mtcs16209x mtxorb noritakevfd
+ pyramid sdeclcd sed1330 sed1520 serialvfd sli
+ stv5730 SureElec svga t6963 text tyan
+ ula200 vlsys_m428 xosd ea65 picolcd serialpos
+ i2500vfd irtrans lis shuttlevfd us2066 )
+
+# Iterate through the array and add the lcd_devices_* that we support
+NUM_DEVICES=${#IUSE_LCD_DEVICES[@]}
+index=0
+while [ "${index}" -lt "${NUM_DEVICES}" ] ; do
+ IUSE="${IUSE} lcd_devices_${IUSE_LCD_DEVICES[${index}]}"
+ let "index = ${index} + 1"
+done
+
+REQUIRED_USE="lcd_devices_mdm166a? ( hid )
+ lcd_devices_us2066? ( lcd_devices_hd44780 )"
+
+RDEPEND="
+ ftdi? ( dev-embedded/libftdi )
+ hid? ( >=dev-libs/libhid-0.2.16 )
+ irman? ( media-libs/libirman )
+ lirc? ( app-misc/lirc )
+ png? ( media-libs/libpng:0 )
+ truetype? ( media-libs/freetype:2 )
+ usb? ( virtual/libusb:0 )
+
+ lcd_devices_graphlcd? ( app-misc/graphlcd-base app-misc/glcdprocdriver dev-libs/serdisplib )
+ lcd_devices_g15? ( dev-libs/libg15 dev-libs/libg15render )
+ lcd_devices_ncurses? ( sys-libs/ncurses )
+ lcd_devices_svga? ( media-libs/svgalib )
+ lcd_devices_ula200? ( dev-embedded/libftdi )
+ lcd_devices_xosd? ( x11-libs/xosd x11-libs/libX11 x11-libs/libXext )
+ lcd_devices_cfontzpacket? ( virtual/libusb:0 )
+ lcd_devices_cwlinux? ( virtual/libusb:0 )
+ lcd_devices_pyramid? ( virtual/libusb:0 )
+ lcd_devices_picolcd? ( virtual/libusb:0 )
+ lcd_devices_i2500vfd? ( dev-embedded/libftdi )
+ lcd_devices_lis? ( dev-embedded/libftdi virtual/libusb:0 )
+ lcd_devices_shuttlevfd? ( virtual/libusb:0 )"
+DEPEND="${RDEPEND}
+ doc? ( app-text/xmlto
+ app-text/docbook-xml-dtd:4.5 )"
+RDEPEND="${RDEPEND}
+ lcd_devices_g15? ( app-misc/g15daemon )"
+
+pkg_setup() {
+ if [ -n "${LCDPROC_DRIVERS}" ] ; then
+ ewarn "Setting the drivers to compile via LCDPROC_DRIVERS is not supported anymore."
+ ewarn "Please use LCD_DEVICES now and see emerge -pv output for the options."
+ fi
+}
+
+src_prepare() {
+ sed -i "37s:server/drivers:/usr/$(get_libdir)/lcdproc:" LCDd.conf || die
+ einfo "Patching LCDd.conf to use DriverPath=/usr/$(get_libdir)/lcdproc/"
+ if use "lcd_devices_us2066" ; then
+ einfo "Patching in support for us2066"
+ epatch "${FILESDIR}/us2066.patch"
+ fi
+}
+
+src_configure() {
+ # This array contains the driver names required by configure --with-drivers=
+ # The positions must be the same as the corresponding use_expand flags
+ local DEVICE_DRIVERS=(curses bayrad CFontz CFontzPacket
+ CwLnx EyeboxOne g15 glcd,glcdlib glk
+ hd44780 icp_a106 imon imonlcd IOWarrior
+ lb216 lcdm001 lcterm
+ MD8800 mdm166a ms6931 mtc_s16209x MtxOrb NoritakeVFD
+ pyramid sdeclcd sed1330 sed1520 serialVFD sli
+ stv5730 SureElec svga t6963 text tyan
+ ula200 vlsys_m428 xosd ea65 picolcd serialPOS
+ i2500vfd irtrans lis shuttleVFD )
+
+ # Generate comma separated list of drivers
+ COMMA_DRIVERS=""
+ FIRST_DRIVER=""
+ local index=0
+
+ while [ "${index}" -lt "${NUM_DEVICES}" ] ; do
+ if use "lcd_devices_${IUSE_LCD_DEVICES[${index}]}" ; then
+ append-driver "${DEVICE_DRIVERS[${index}]}"
+ fi
+ let "index = ${index} + 1"
+ done
+
+ # Append the not-lcd-drivers (input)
+ use lirc && append-driver "lirc"
+ use irman && append-driver "irman"
+ use joystick && append-driver "joy"
+
+ if [ -z "${COMMA_DRIVERS}" ] ; then
+ ewarn "You are compiling LCDd without support for any LCD drivers at all."
+ else
+ # Patch the config to contain a driver that is actually installed instead of the default
+ elog "Compiling the following drivers for LCDd: ${COMMA_DRIVERS}"
+ elog "Setting Driver=${FIRST_DRIVER} in LCDd.conf"
+ sed -i "53s:curses:${FIRST_DRIVER}:" LCDd.conf || die
+ fi
+
+ local EXTRA_CONF
+ if use lcd_devices_cfontzpacket || use lcd_devices_cwlinux || use lcd_devices_pyramid || \
+ use lcd_devices_picolcd || use lcd_devices_lis || use lcd_devices_shuttlevfd ; then
+ EXTRA_CONF="--enable-libusb"
+ else
+ EXTRA_CONF="$(use_enable usb libusb)"
+ fi
+
+ if use lcd_devices_ula200 || use lcd_devices_i2500vfd || use lcd_devices_lis ; then
+ EXTRA_CONF="${EXTRA_CONF} --enable-libftdi"
+ else
+ EXTRA_CONF="${EXTRA_CONF} $(use_enable ftdi libftdi)"
+ fi
+
+ econf --enable-extra-charmaps \
+ $(use_enable debug) \
+ $(use_enable nfs stat-nfs) \
+ $(use_enable png libpng) \
+ $(use_enable samba stat-smbfs ) \
+ $(use_enable seamless-hbars) \
+ $(use_enable truetype freetype) \
+ ${EXTRA_CONF} \
+ "--enable-drivers=${COMMA_DRIVERS}"
+}
+
+src_compile() {
+ default
+
+ if use doc; then
+ ebegin "Creating user documentation"
+ cd "${S}"/docs/lcdproc-user
+ xmlto html --skip-validation lcdproc-user.docbook
+ eend $?
+
+ ebegin "Creating dev documentation"
+ cd "${S}"/docs/lcdproc-dev
+ xmlto html --skip-validation lcdproc-dev.docbook
+ eend $?
+ fi
+}
+
+append-driver() {
+ [[ -z $* ]] && return 0
+ if [ -z "${COMMA_DRIVERS}" ] ; then
+ # First in the list
+ COMMA_DRIVERS="$*"
+ FIRST_DRIVER="$*"
+ else
+ # Second, third, ... include a comma at the front
+ COMMA_DRIVERS="${COMMA_DRIVERS},$*"
+ fi
+ return 0
+}
+
+src_install() {
+ emake DESTDIR="${D}" install
+
+ # move example clients installed to /usr/bin
+ rm -f "${D}"/usr/bin/{tail,lcdmetar,iosock,fortune,x11amp}.pl
+ insinto /usr/share/lcdproc/clients
+ doins clients/examples/*.pl
+ doins clients/metar/*.pl
+
+ newinitd "${FILESDIR}/0.5.1-LCDd.initd" LCDd
+ newinitd "${FILESDIR}/0.5.2-r2-lcdproc.initd" lcdproc
+
+ dodoc README CREDITS ChangeLog INSTALL TODO
+
+ if use doc; then
+ insinto /usr/share/doc/${PF}/lcdproc-user
+ doins docs/lcdproc-user/*.html
+ insinto /usr/share/doc/${PF}/lcdproc-dev
+ doins docs/lcdproc-dev/*.html
+ fi
+}
diff --git a/app-misc/lirc-0.9.0 b/app-misc/lirc-0.9.0
new file mode 100644
index 0000000..d983f03
--- /dev/null
+++ b/app-misc/lirc-0.9.0
@@ -0,0 +1,17 @@
+emerge: command-line interface to the Portage system
+Usage:
+ emerge [ options ] [ action ] [ ebuild | tbz2 | file | @set | atom ] [ ... ]
+ emerge [ options ] [ action ] < @system | @world >
+ emerge < --sync | --metadata | --info >
+ emerge --resume [ --pretend | --ask | --skipfirst ]
+ emerge --help
+Options: -[abBcCdDefgGhjkKlnNoOpPqrsStuvVw]
+ [ --color < y | n > ] [ --columns ]
+ [ --complete-graph ] [ --deep ]
+ [ --jobs JOBS ] [ --keep-going ] [ --load-average LOAD ]
+ [ --newrepo ] [ --newuse ] [ --noconfmem ] [ --nospinner ]
+ [ --oneshot ] [ --onlydeps ] [ --quiet-build [ y | n ] ]
+ [ --reinstall changed-use ] [ --with-bdeps < y | n > ]
+Actions: [ --depclean | --list-sets | --search | --sync | --version ]
+
+ For more help consult the man page.
diff --git a/app-misc/lirc/files/lircd.service.patch b/app-misc/lirc/files/lircd.service.patch
new file mode 100644
index 0000000..c5013ee
--- /dev/null
+++ b/app-misc/lirc/files/lircd.service.patch
@@ -0,0 +1,13 @@
+--- a/systemd/lircd.service 2015-08-05 04:33:05.940754618 -0600
++++ b/systemd/lircd.service 2015-08-05 01:18:38.694447032 -0600
+@@ -4,6 +4,10 @@
+
+ [Service]
+ Type=simple
++
++ExecStartPre=/bin/mkdir -p /var/run/lirc
++ExecStartPre=/bin/chown -R lirc:lirc /var/run/lirc
++
+ ExecStart=/usr/sbin/lircd --nodaemon
+
+ [Install]