sys-power/nut: Remove. Patches can now reside in portage-env-mv

Signed-off-by: Martin Väth <mvath@google.com>

12 files changed, 0 insertions, 609 deletions

diff --git a/sys-power/nut/Manifest b/sys-power/nut/Manifest
deleted file mode 100644
index 941915e8..00000000
--- a/sys-power/nut/Manifest
+++ /dev/null
@@ -1 +0,0 @@
-DIST nut-2.7.4.tar.gz 2509831 SHA512 320c4aff85d8a370c5eff77d33924fdfc3caf6a250620693cdd5bf3336b3a80d8a207488eee841bcf8b72fbad68fda4c074e63b99c56e7886716fc934122d11a
diff --git a/sys-power/nut/files/lighttpd_nut.conf-2.2.0 b/sys-power/nut/files/lighttpd_nut.conf-2.2.0
deleted file mode 100644
index 341ad101..00000000
--- a/sys-power/nut/files/lighttpd_nut.conf-2.2.0
+++ /dev/null
@@ -1,22 +0,0 @@
-###############################################################################
-# Lighttpd configuration for using NUT under Gentoo Linux.
-# Copyright 1999-2006 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-###############################################################################
-
-# Simple copy this to /etc/lighttpd/ and include it in your lighttpd.conf.
-# It will make NUT available at http://$HOST/nut/ 
-
-server.modules += ("mod_cgi")
-
-# If you want to limit it to some host, uncomment the host check and modify it to your needs.
-# $HTTP["host"] == "www2.example.org" {
-alias.url += ( "/nut/" => "/usr/share/nut/cgi/" )
-$HTTP["url"] =~ "^/nut/" {
-  dir-listing.activate = "disable"
-  cgi.assign = ( ".cgi" => "" )
-  index-file.names = ( "upsstats.cgi" )
-}
-# }
-
-# vim: set ft=conf foldmethod=marker et :
diff --git a/sys-power/nut/files/nut-2.2.2-init.d-upsdrv b/sys-power/nut/files/nut-2.2.2-init.d-upsdrv
deleted file mode 100644
index 01e9b708..00000000
--- a/sys-power/nut/files/nut-2.2.2-init.d-upsdrv
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2016 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-extra_commands="stopall startall"
-
-UPSNAME=${SVCNAME#*.}
-msgtext="drivers"
-[ "${UPSNAME}" = "${SVCNAME}" ] && UPSNAME=''
-[ -n "$UPSNAME" ] && msgtext="driver for $UPSNAME"
-
-depend() {
-	before upsd
-	[ "${UPSNAME}" != '' ] && provide upsdrv
-}
-
-start() {
-	_dostart "$UPSNAME" "$msgtext"
-}
-stop() {
-	_dostop "$UPSNAME" "$msgtext"
-}
-
-startall() {
-	_dostart "" "$msgtext"
-}
-stopall() {
-	_dostop "" "$msgtext"
-}
-
-_dostart() {
-	ebegin "Starting UPS $msgtext"
-	/usr/sbin/upsdrvctl start $UPSNAME
-	eend $? "Failed to start UPS $msgtext!"
-}
-
-_dostop() {
-	# The pidfile names depend on the actual UPS name
-	# Not in our control at all
-	ebegin "Stopping UPS $msgtext"
-	/usr/sbin/upsdrvctl stop $UPSNAME
-	eend $? "Failed to stop UPS $msgtext!"
-}
diff --git a/sys-power/nut/files/nut-2.6.2-lowspeed-buffer-size.patch b/sys-power/nut/files/nut-2.6.2-lowspeed-buffer-size.patch
deleted file mode 100644
index 9806d07e..00000000
--- a/sys-power/nut/files/nut-2.6.2-lowspeed-buffer-size.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-http://bugs.gentoo.org/show_bug.cgi?id=318937
-http://boxster.ghz.cc/projects/nut/changeset/2407
-
-Respun from nut-2.4.3-lowspeed-buffer-size.patch
-
-Index: /trunk/drivers/libhid.c
-===================================================================
---- /trunk/drivers/libhid.c (revision 2336)
-+++ /trunk/drivers/libhid.c (revision 2407)
-@@ -142,5 +142,5 @@
- 	int	id = pData->ReportID;
- 	int	r;
--	unsigned char	buf[SMALLBUF];
-+	unsigned char	buf[8];	/* Maximum size for low-speed USB devices */
- 
- 	if (rbuf->ts[id] + age > time(NULL)) {
diff --git a/sys-power/nut/files/nut-2.6.5-init.d-upsd b/sys-power/nut/files/nut-2.6.5-init.d-upsd
deleted file mode 100644
index 931e9380..00000000
--- a/sys-power/nut/files/nut-2.6.5-init.d-upsd
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2016 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-extra_started_commands="reload"
-
-pidfile=/var/lib/nut/upsd.pid
-bin=/usr/sbin/upsd
-
-depend() {
-	use net
-	before upsmon
-	after upsdrv
-}
-
-start() {
-	ebegin "Starting upsd"
-	# clean up first
-	pkill -u root,nut -x ${bin}
-	sleep 1
-	rm -f ${pidfile}
-	# now start up
-	start-stop-daemon --start --quiet --exec ${bin}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping upsd"
-	start-stop-daemon --stop --quiet --pidfile ${pidfile}
-	eend $?
-}
-
-reload() {
-	ebegin "Reloading upsd"
-	start-stop-daemon --stop --signal HUP --oknodo --quiet --pidfile ${pidfile}
-	eend $?
-}
diff --git a/sys-power/nut/files/nut-2.6.5-init.d-upslog b/sys-power/nut/files/nut-2.6.5-init.d-upslog
deleted file mode 100644
index 2e07d520..00000000
--- a/sys-power/nut/files/nut-2.6.5-init.d-upslog
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2013 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-extra_started_commands="reload"
-
-pidfile=/var/run/upslog.pid
-bin=/usr/bin/upslog
-
-depend() {
-	use upsdrv
-	after upsdrv
-}
-
-start() {
-	ebegin "Starting upslog"
-	start-stop-daemon --start --quiet --exec ${bin}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping upslog"
-	start-stop-daemon --stop --quiet --pidfile ${pidfile}
-	eend $?
-}
-reload() {
-	ebegin "Reloading upslog"
-	start-stop-daemon --stop --signal HUP --oknodo --quiet --pidfile ${pidfile}
-	eend $?
-}
diff --git a/sys-power/nut/files/nut-2.6.5-init.d-upsmon b/sys-power/nut/files/nut-2.6.5-init.d-upsmon
deleted file mode 100644
index 6e986da0..00000000
--- a/sys-power/nut/files/nut-2.6.5-init.d-upsmon
+++ /dev/null
@@ -1,29 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2013 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-extra_started_commands="reload"
-
-pidfile=/var/run/upsmon.pid
-bin=/usr/sbin/upsmon
-
-depend() {
-	use net
-}
-
-start() {
-	ebegin "Starting upsmon"
-	start-stop-daemon --start --quiet --exec ${bin}
-	eend $?
-}
-
-stop() {
-	ebegin "Stopping upsmon"
-	start-stop-daemon --stop --quiet --pidfile ${pidfile}
-	eend $?
-}
-reload() {
-	ebegin "Reloading upsmon"
-	start-stop-daemon --stop --signal HUP --oknodo --quiet --pidfile ${pidfile}
-	eend $?
-}
diff --git a/sys-power/nut/files/nut-2.7.1-snmpusb-order.patch b/sys-power/nut/files/nut-2.7.1-snmpusb-order.patch
deleted file mode 100644
index e62b6571..00000000
--- a/sys-power/nut/files/nut-2.7.1-snmpusb-order.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-The code that generates the SNMP and USB headers to compile against does not
-have a deterministic order, leading to different results at times.
-
-Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
-
-diff -Nuar --exclude .libs --exclude '*.o' --exclude core nut-2.7.1.orig/tools/nut-snmpinfo.py nut-2.7.1/tools/nut-snmpinfo.py
---- nut-2.7.1.orig/tools/nut-snmpinfo.py	2014-01-04 19:08:19.117150636 -0800
-+++ nut-2.7.1/tools/nut-snmpinfo.py	2013-07-26 12:41:11.000000000 -0700
-@@ -78,7 +78,9 @@
- output_file.write( "/* SNMP IDs device table */\n" )
- output_file.write( "static snmp_device_id_t snmp_device_table[] = {\n" )
- 
--for filename in glob.glob('../drivers/*-mib.c'):
-+mibs = glob.glob('../drivers/*-mib.c')
-+mibs.sort()
-+for filename in mibs:
- 	list_of_line = open(filename,'r').read().split(';')
- 	for line in list_of_line:
- 		if "mib2nut_info_t" in line:
-diff -Nuar --exclude .libs --exclude '*.o' --exclude core nut-2.7.1.orig/tools/nut-usbinfo.pl nut-2.7.1/tools/nut-usbinfo.pl
---- nut-2.7.1.orig/tools/nut-usbinfo.pl	2014-01-04 19:12:45.595949760 -0800
-+++ nut-2.7.1/tools/nut-usbinfo.pl	2013-11-17 11:27:38.000000000 -0800
-@@ -75,7 +75,12 @@
- 
- ################# MAIN #################
- 
--find(\&find_usbdevs,$scanPath);
-+find({ 
-+		wanted => \&find_usbdevs, 
-+		follow => 1, 
-+		preprocess => sub { return sort @_ },
-+	},
-+	$scanPath);
- &gen_usb_files;
- 
- ################# SUB METHOD #################
-
diff --git a/sys-power/nut/files/nut-2.7.2/nut-2.7.2-no-libdummy.patch b/sys-power/nut/files/nut-2.7.2/nut-2.7.2-no-libdummy.patch
deleted file mode 100644
index ca0d8be0..00000000
--- a/sys-power/nut/files/nut-2.7.2/nut-2.7.2-no-libdummy.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-diff --git a/drivers/Makefile.am b/drivers/Makefile.am
-index 99614ca..42b3611 100644
---- a/drivers/Makefile.am
-+++ b/drivers/Makefile.am
-@@ -267,5 +267,6 @@ dist_noinst_HEADERS = apc-mib.h apc-hid.h baytech-mib.h bcmxcp.h    \
-
- # Define a dummy library so that Automake builds rules for the
- # corresponding object files.  This library is not actually built,
--EXTRA_LIBRARIES = libdummy.a
--libdummy_a_SOURCES = main.c dstate.c serial.c
-+EXTRA_LIBRARIES =
-+#EXTRA_LIBRARIES = libdummy.a
-+#libdummy_a_SOURCES = main.c dstate.c serial.c
diff --git a/sys-power/nut/files/nut.powerfail.initd b/sys-power/nut/files/nut.powerfail.initd
deleted file mode 100644
index 3f2e1a55..00000000
--- a/sys-power/nut/files/nut.powerfail.initd
+++ /dev/null
@@ -1,48 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2014 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-description='Signal the UPS to kill power in a power failure condition'
-
-depend() {
-	# This is only for baselayout2
-	if [ -f /etc/init.d/sysfs ]; then
-		keyword -jail -lxc -openvz -prefix -uml -vserver -xenu -timeout
-		need mount-ro
-	fi
-}
-
-start() {
-	if [ ! -f /etc/init.d/sysfs ]; then
-		eerror "The $SVCNAME init-script is written for baselayout-2!"
-		eerror "Please do not use it with baselayout-1!".
-		return 1
-	fi
-	local UPS_CTL UPS_POWERDOWN
-
-	if [ -f /etc/killpower -o -f /etc/nut/killpower ]; then
-		UPS_CTL=/sbin/upsdrvctl
-		UPS_POWERDOWN="${UPS_CTL} shutdown"
-	elif [ -f /etc/apcupsd/powerfail ]; then
-		UPS_CTL=/sbin/apcupsd
-		UPS_POWERDOWN="${UPS_CTL} --killpower"
-	else
-		ewarn "UPS powerfail script scheduled, but no poweroff commands found."
-		return 0
-	fi
-
-	if [ -f "${UPS_CTL}" -a -x "${UPS_CTL}" ]; then
-		ebegin 'Signaling UPS to kill power'
-		${UPS_POWERDOWN}
-		eend $?
-
-		ebegin 'Halt system and wait for the UPS to kill our power'
-		/sbin/halt -id
-		# If the sleep gets hit, something is wrong...
-		# do NOT restart the system.
-		while [ 1 ]; do sleep 60; done
-	else
-		ewarn "UPS powerfail script scheduled, and flags found, but ${UPS_CTL} missing."
-	fi
-}
-
diff --git a/sys-power/nut/metadata.xml b/sys-power/nut/metadata.xml
deleted file mode 100644
index 28063efc..00000000
--- a/sys-power/nut/metadata.xml
+++ /dev/null
@@ -1,65 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
-<maintainer type="person">
-	<email>robbat2@gentoo.org</email>
-	<name>Robin H. Johnson</name>
-</maintainer>
-<maintainer type="person">
-	<email>prometheanfire@gentoo.org</email>
-</maintainer>
-<use>
-	<flag name="ipmi">Support IPMI-based UPSes.</flag>
-	<flag name="ups_drivers_al175">Driver for Eltek UPS models with AL175 alarm module</flag>
-	<flag name="ups_drivers_bcmxcp">Driver for UPSes supporting the serial BCM/XCP protocol</flag>
-	<flag name="ups_drivers_belkin">Driver for Belkin serial UPS equipment</flag>
-	<flag name="ups_drivers_belkinunv">Driver for Belkin "Universal UPS" and compatible</flag>
-	<flag name="ups_drivers_bestfcom">Driver for Best Power Fortress/Ferrups</flag>
-	<flag name="ups_drivers_bestfortress">Driver for old Best Fortress UPS equipment</flag>
-	<flag name="ups_drivers_bestuferrups">Driver for Best Power Micro-Ferrups</flag>
-	<flag name="ups_drivers_bestups">Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment</flag>
-	<flag name="ups_drivers_dummy-ups">Driver for multi-purpose UPS emulation</flag>
-	<flag name="ups_drivers_etapro">Driver for ETA UPS equipment</flag>
-	<flag name="ups_drivers_everups">Driver for Ever UPS models</flag>
-	<flag name="ups_drivers_gamatronic">Driver for Gamatronic UPS equipment</flag>
-	<flag name="ups_drivers_genericups">Driver for contact-closure UPS equipment</flag>
-	<flag name="ups_drivers_isbmex">Driver for ISBMEX UPS equipment</flag>
-	<flag name="ups_drivers_liebert">Driver for Liebert contact-closure UPS equipment</flag>
-	<flag name="ups_drivers_liebert-esp2">Driver for Liebert UPS, using the ESP-II serial protocol</flag>
-	<flag name="ups_drivers_masterguard">Driver for Masterguard UPS equipment</flag>
-	<flag name="ups_drivers_metasys">Driver for Meta System UPS equipment</flag>
-	<flag name="ups_drivers_mge-utalk">Driver for MGE UPS SYSTEMS UTalk protocol equipment</flag>
-	<flag name="ups_drivers_microdowell">Driver for Microdowell Enterprise UPS series</flag>
-	<flag name="ups_drivers_mge-shut">Driver for SHUT Protocol UPS equipment</flag>
-	<flag name="ups_drivers_oldmge-shut">Driver for SHUT Protocol UPS equipment (older implementation)</flag>
-	<flag name="ups_drivers_oneac">Driver for Oneac UPS equipment</flag>
-	<flag name="ups_drivers_optiups">Driver for Opti-UPS (Viewsonic) UPS and Zinto D (ONLINE-USV) equipment</flag>
-	<flag name="ups_drivers_powercom">UPS driver for serial Powercom/Trust/Advice UPS equipment</flag>
-	<flag name="ups_drivers_rhino">Driver for Brazilian Microsol RHINO UPS equipment</flag>
-	<flag name="ups_drivers_safenet">Driver for SafeNet compatible UPS equipment</flag>
-	<flag name="ups_drivers_solis">Driver for Brazilian Microsol SOLIS UPS equipment</flag>
-	<flag name="ups_drivers_tripplite">Driver for Tripp-Lite SmartPro UPS equipment</flag>
-	<flag name="ups_drivers_tripplitesu">Driver for Tripp-Lite SmartOnline (SU) UPS equipment</flag>
-	<flag name="ups_drivers_upscode2">Driver for UPScode II compatible UPS equipment</flag>
-	<flag name="ups_drivers_victronups">Driver for IMV/Victron UPS unit Match, Match Lite, NetUps</flag>
-	<flag name="ups_drivers_powerpanel">Driver for PowerPanel Plus compatible UPS equipment</flag>
-	<flag name="ups_drivers_blazer_ser">Driver for Megatec/Q1 protocol serial based UPS equipment</flag>
-	<flag name="ups_drivers_clone">Fake driver to clone outlets for device grouping</flag>
-	<flag name="ups_drivers_clone-outlet">Fake driver to clone outlets for device grouping</flag>
-	<flag name="ups_drivers_ivtscd">driver for the IVT Solar Controller Device</flag>
-	<flag name="ups_drivers_apcsmart">Driver for American Power Conversion Smart Protocol UPS equipment</flag>
-	<flag name="ups_drivers_apcsmart-old">Driver for American Power Conversion Smart Protocol UPS equipment</flag>
-	<flag name="ups_drivers_apcupsd-ups">Driver for apcupsd client access</flag>
-	<flag name="ups_drivers_riello_ser">Driver for Riello UPS Protocol UPS equipment</flag>
-	<flag name="ups_drivers_nutdrv_qx">Driver for Q* protocol serial and USB based UPS equipment</flag>
-	<flag name="ups_drivers_usbhid-ups">Driver for USB/HID UPS equipment</flag>
-	<flag name="ups_drivers_bcmxcp_usb">Experimental driver for UPSes supporting the BCM/XCP protocol over USB</flag>
-	<flag name="ups_drivers_tripplite_usb">Driver for older Tripp Lite USB UPSes (not PDC HID)</flag>
-	<flag name="ups_drivers_blazer_usb">Driver for Megatec/Q1 protocol USB based UPS equipment</flag>
-	<flag name="ups_drivers_richcomm_usb">Driver UPS equipment using Richcomm dry-contact to USB solution</flag>
-	<flag name="ups_drivers_riello_usb">Driver for Riello UPS Protocol UPS equipment via USB</flag>
-	<flag name="ups_drivers_netxml-ups">Driver for Eaton / MGE Network Management Card / Proxy (XML/HTTP Protocol) equipment</flag>
-	<flag name="ups_drivers_snmp-ups">Multi-MIB Driver for SNMP UPS equipment</flag>
-	<flag name="ups_drivers_nut-ipmipsu">Driver for IPMI Power Supply Units (PSU)</flag>
-</use>
-</pkgmetadata>
diff --git a/sys-power/nut/nut-2.7.4-r2.ebuild b/sys-power/nut/nut-2.7.4-r2.ebuild
deleted file mode 100644
index a450cf4d..00000000
--- a/sys-power/nut/nut-2.7.4-r2.ebuild
+++ /dev/null
@@ -1,268 +0,0 @@
-# Copyright 1999-2018 Gentoo Authors and Martin V\"ath
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=7
-inherit autotools bash-completion-r1 fixheadtails multilib user systemd flag-o-matic toolchain-funcs
-
-MY_P=${P/_/-}
-
-DESCRIPTION="Network-UPS Tools"
-HOMEPAGE="http://www.networkupstools.org/"
-# Nut mirrors are presently broken
-SRC_URI="http://random.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz
-	 http://www.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86 ~x86-fbsd"
-
-IUSE="cgi ipmi snmp +usb selinux ssl tcpd xml zeroconf"
-DEPEND="
-	cgi? ( >=media-libs/gd-2[png] )
-	snmp? ( net-analyzer/net-snmp )
-	usb? ( virtual/libusb:0 )
-	ssl? ( >=dev-libs/openssl-1 )
-	tcpd? ( sys-apps/tcp-wrappers )
-	xml? ( >=net-libs/neon-0.25.0 )
-	ipmi? ( sys-libs/freeipmi )
-	zeroconf? ( net-dns/avahi )
-	virtual/udev"
-BDEPEND="
-	virtual/pkgconfig"
-RDEPEND="${DEPEND}
-	!<sys-apps/systemd-234
-	selinux? ( sec-policy/selinux-nut )
-"
-
-S=${WORKDIR}/${MY_P}
-
-# Bug #480664 requested UPS_DRIVERS_IUSE for more flexibility in building this package
-SERIAL_DRIVERLIST="al175 bcmxcp belkin belkinunv bestfcom bestfortress bestuferrups bestups dummy-ups etapro everups gamatronic genericups isbmex liebert liebert-esp2 masterguard metasys oldmge-shut mge-utalk microdowell mge-shut oneac optiups powercom rhino safenet solis tripplite tripplitesu upscode2 victronups powerpanel blazer_ser clone clone-outlet ivtscd apcsmart apcsmart-old apcupsd-ups riello_ser nutdrv_qx"
-SNMP_DRIVERLIST="snmp-ups"
-USB_LIBUSB_DRIVERLIST="usbhid-ups bcmxcp_usb tripplite_usb blazer_usb richcomm_usb riello_usb nutdrv_qx"
-USB_DRIVERLIST=${USB_LIBUSB_DRIVERLIST}
-#HAL_DRIVERLIST="usbhid-ups bcmxcp_usb tripplite_usb blazer_usb riello_usb nutdrv_qx"
-NEONXML_DRIVERLIST="netxml-ups"
-IPMI_DRIVERLIST="nut-ipmipsu"
-# Now we build from it:
-for name in ${SERIAL_DRIVERLIST} ; do
-	IUSE_UPS_DRIVERS="${IUSE_UPS_DRIVERS} +ups_drivers_${name}"
-done
-for name in ${USB_DRIVERLIST} ; do
-	IUSE_UPS_DRIVERS="${IUSE_UPS_DRIVERS} +ups_drivers_${name}"
-	REQUIRED_USE="${REQUIRED_USE} ups_drivers_${name}? ( usb )"
-done
-for name in ${NEONXML_DRIVERLIST}; do
-	IUSE_UPS_DRIVERS="${IUSE_UPS_DRIVERS} ups_drivers_${name}"
-	REQUIRED_USE="${REQUIRED_USE} ups_drivers_${name}? ( xml )"
-done
-for name in ${SNMP_DRIVERLIST} ; do
-	IUSE_UPS_DRIVERS="${IUSE_UPS_DRIVERS} ups_drivers_${name}"
-	REQUIRED_USE="${REQUIRED_USE} ups_drivers_${name}? ( snmp )"
-done
-for name in ${IPMI_DRIVERLIST} ; do
-	IUSE_UPS_DRIVERS="${IUSE_UPS_DRIVERS} ups_drivers_${name}"
-	REQUIRED_USE="${REQUIRED_USE} ups_drivers_${name}? ( ipmi )"
-done
-IUSE="${IUSE} ${IUSE_UPS_DRIVERS}"
-
-# public files should be 644 root:root
-NUT_PUBLIC_FILES="/etc/nut/{ups,upssched}.conf"
-# private files should be 640 root:nut - readable by nut, writeable by root,
-NUT_PRIVATE_FILES="/etc/nut/{upsd.conf,upsd.users,upsmon.conf}"
-# public files should be 644 root:root, only installed if USE=cgi
-NUT_CGI_FILES="/etc/nut/{{hosts,upsset}.conf,upsstats{,-single}.html}"
-
-pkg_setup() {
-	enewgroup nut 84
-	enewuser nut 84 -1 /var/lib/nut nut,uucp
-	# As of udev-104, NUT must be in uucp and NOT in tty.
-	gpasswd -d nut tty 2>/dev/null
-	gpasswd -a nut uucp 2>/dev/null
-	# in some cases on old systems it wasn't in the nut group either!
-	gpasswd -a nut nut 2>/dev/null
-	warningmsg ewarn
-}
-
-src_prepare() {
-	#ht_fix_file configure.in
-
-	eapply "${FILESDIR}/nut-2.7.2/nut-2.7.2-no-libdummy.patch"
-	eapply -p2 "${FILESDIR}"/${PN}-2.6.2-lowspeed-buffer-size.patch
-	eapply "${FILESDIR}"/${PN}-2.7.1-snmpusb-order.patch
-
-	sed -e "s:GD_LIBS.*=.*-L/usr/X11R6/lib \(.*\) -lXpm -lX11:GD_LIBS=\"\1:" \
-		-e '/systemdsystemunitdir=.*echo.*sed.*libdir/s,^,#,g' \
-		-e 's'\''\(systemdsystemshutdowndir="\)${libdir}'\''\1'"${EPREFIX}/lib'" \
-		-i configure.ac || die
-
-	sed -e "s:52.nut-usbups.rules:70-nut-usbups.rules:" \
-		-i scripts/udev/Makefile.am || die
-
-	rm -f ltmain.sh m4/lt* m4/libtool.m4
-
-	sed -i \
-		-e 's:@LIBSSL_LDFLAGS@:@LIBSSL_LIBS@:' \
-		lib/libupsclient{.pc,-config}.in || die #361685
-
-	default
-	eautoreconf
-}
-
-src_configure() {
-	local myconf
-	append-flags -fno-lto
-	tc-export CC
-	tc-export CXX
-	tc-export AR
-
-	local UPS_DRIVERS=""
-	for u in $USE ; do
-		u2=${u#ups_drivers_}
-		[[ "${u}" != "${u2}" ]] && UPS_DRIVERS="${UPS_DRIVERS} ${u2}"
-	done
-	UPS_DRIVERS="${UPS_DRIVERS# }" UPS_DRIVERS="${UPS_DRIVERS% }"
-	myconf="${myconf} --with-drivers=${UPS_DRIVERS// /,}"
-
-	use cgi && myconf="${myconf} --with-cgipath=/usr/share/nut/cgi"
-
-	# TODO: USE flag for sys-power/powerman
-	econf \
-		--sysconfdir=/etc/nut \
-		--datarootdir=/usr/share/nut \
-		--datadir=/usr/share/nut \
-		--disable-static \
-		--with-statepath=/var/lib/nut \
-		--with-drvpath=/$(get_libdir)/nut \
-		--with-htmlpath=/usr/share/nut/html \
-		--with-user=nut \
-		--with-group=nut \
-		--with-logfacility=LOG_DAEMON \
-		--with-dev \
-		--with-serial \
-		--without-powerman \
-		$(use_with cgi) \
-		$(use_with ipmi) \
-		$(use_with ipmi freeipmi) \
-		$(use_with snmp) \
-		$(use_with ssl) \
-		$(use_with tcpd wrap) \
-		$(use_with usb) \
-		$(use_with xml neon) \
-		$(use_with zeroconf avahi) \
-		--with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \
-		${myconf}
-}
-
-src_install() {
-	emake DESTDIR="${ED}" install || die
-
-	find "${ED}" -name '*.la' -exec rm -f {} +
-
-	dodir /sbin
-	dosym ../usr/sbin/upsdrvctl /sbin/upsdrvctl
-
-	if use cgi; then
-		elog "CGI monitoring scripts are installed in /usr/share/nut/cgi."
-		elog "copy them to your web server's ScriptPath to activate (this is a"
-		elog "change from the old location)."
-		elog "If you use lighttpd, see lighttpd_nut.conf in the documentation."
-	fi
-
-	# this must be done after all of the install phases
-	for i in "${D}"/etc/nut/*.sample ; do
-		mv "${i}" "${i/.sample/}"
-	done
-
-	dodoc AUTHORS ChangeLog docs/*.txt MAINTAINERS NEWS README TODO UPGRADING || die
-
-	newdoc lib/README README.lib || die
-	newdoc "${FILESDIR}"/lighttpd_nut.conf-2.2.0 lighttpd_nut.conf || die
-
-	docinto cables
-	dodoc docs/cables/* || die
-
-	newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsd upsd || die
-	newinitd "${FILESDIR}"/nut-2.2.2-init.d-upsdrv upsdrv || die
-	newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsmon upsmon || die
-	newinitd "${FILESDIR}"/nut-2.6.5-init.d-upslog upslog || die
-	newinitd "${FILESDIR}"/nut.powerfail.initd nut.powerfail || die
-
-	keepdir /var/lib/nut
-
-	einfo "Setting up permissions on files and directories"
-	fperms 0700 /var/lib/nut
-	fowners nut:nut /var/lib/nut
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	eval fperms 0640 ${NUT_PRIVATE_FILES}
-	eval fowners root:nut ${NUT_PRIVATE_FILES}
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	eval fperms 0644 ${NUT_PUBLIC_FILES}
-	eval fowners root:root ${NUT_PUBLIC_FILES}
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	if use cgi; then
-		eval fperms 0644 ${NUT_CGI_FILES}
-		eval fowners root:root ${NUT_CGI_FILES}
-	fi
-
-	# this is installed for 2.4 and fbsd guys
-	if ! has_version virtual/udev; then
-		einfo "Installing non-udev hotplug support"
-		insinto /etc/hotplug/usb
-		insopts -m 755
-		doins scripts/hotplug/nut-usbups.hotplug
-	fi
-
-	dobashcomp "${S}"/scripts/misc/nut.bash_completion
-}
-
-pkg_postinst() {
-	# this is to ensure that everybody that installed old versions still has
-	# correct permissions
-
-	chown nut:nut "${ROOT}"/var/lib/nut 2>/dev/null
-	chmod 0700 "${ROOT}"/var/lib/nut 2>/dev/null
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	eval chown root:nut "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null
-	eval chmod 0640 "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	eval chown root:root "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null
-	eval chmod 0644 "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null
-
-	# Do not remove eval here, because the variables contain shell expansions.
-	if use cgi; then
-		eval chown root:root "${ROOT}"${NUT_CGI_FILES} 2>/dev/null
-		eval chmod 0644 "${ROOT}"${NUT_CGI_FILES} 2>/dev/null
-	fi
-
-	warningmsg elog
-}
-
-warningmsg() {
-	msgfunc="$1"
-	[ -z "$msgfunc" ] && die "msgfunc not specified in call to warningmsg!"
-	${msgfunc} "Please note that NUT now runs under the 'nut' user."
-	${msgfunc} "NUT is in the uucp group for access to RS-232 UPS."
-	${msgfunc} "However if you use a USB UPS you may need to look at the udev or"
-	${msgfunc} "hotplug rules that are installed, and alter them suitably."
-	${msgfunc} ''
-	${msgfunc} "You are strongly advised to read the UPGRADING file provided by upstream."
-	${msgfunc} ''
-	${msgfunc} "Please note that upsdrv is NOT automatically started by upsd anymore."
-	${msgfunc} "If you have multiple UPS units, you can use their NUT names to"
-	${msgfunc} "have a service per UPS:"
-	${msgfunc} "ln -s /etc/init.d/upsdrv /etc/init.d/upsdrv.\$UPSNAME"
-	${msgfunc} ''
-	${msgfunc} 'If you want apcupsd to power off your UPS when it'
-	${msgfunc} 'shuts down your system in a power failure, you must'
-	${msgfunc} 'add nut.powerfail to your shutdown runlevel:'
-	${msgfunc} ''
-	${msgfunc} 'rc-update add nut.powerfail shutdown'
-	${msgfunc} ''
-
-}