From 280f3602f4f148f94c4c5e017bc5042fbe90be64 Mon Sep 17 00:00:00 2001
From: Yuriy Ustushenko <yoreek@yahoo.com>
Date: Mon, 11 Jan 2021 17:08:06 +0200
Subject: add v1.18.0, v1.19.6

Signed-off-by: Yuriy Ustushenko <yoreek@yahoo.com>
---
 www-servers/nginx/Manifest                         |   36 +-
 ...just-loglevel-for-authentication-failures.patch |   22 -
 .../nginx/files/http_brotli-detect-brotli-r2.patch |   30 -
 .../nginx/files/http_brotli-detect-brotli-r3.patch |   28 +
 www-servers/nginx/files/nginx.service-r1           |    1 +
 www-servers/nginx/metadata.xml                     |    4 -
 www-servers/nginx/nginx-1.16.1-r100.ebuild         | 1108 --------------------
 www-servers/nginx/nginx-1.17.3-r100.ebuild         | 1108 --------------------
 www-servers/nginx/nginx-1.17.4-r100.ebuild         | 1108 --------------------
 www-servers/nginx/nginx-1.17.5-r100.ebuild         | 1108 --------------------
 www-servers/nginx/nginx-1.18.0-r999.ebuild         | 1106 +++++++++++++++++++
 www-servers/nginx/nginx-1.19.6-r999.ebuild         | 1106 +++++++++++++++++++
 12 files changed, 2257 insertions(+), 4508 deletions(-)
 delete mode 100644 www-servers/nginx/files/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
 delete mode 100644 www-servers/nginx/files/http_brotli-detect-brotli-r2.patch
 create mode 100644 www-servers/nginx/files/http_brotli-detect-brotli-r3.patch
 delete mode 100644 www-servers/nginx/nginx-1.16.1-r100.ebuild
 delete mode 100644 www-servers/nginx/nginx-1.17.3-r100.ebuild
 delete mode 100644 www-servers/nginx/nginx-1.17.4-r100.ebuild
 delete mode 100644 www-servers/nginx/nginx-1.17.5-r100.ebuild
 create mode 100644 www-servers/nginx/nginx-1.18.0-r999.ebuild
 create mode 100644 www-servers/nginx/nginx-1.19.6-r999.ebuild

diff --git a/www-servers/nginx/Manifest b/www-servers/nginx/Manifest
index fd61e5e..bf1fcd7 100644
--- a/www-servers/nginx/Manifest
+++ b/www-servers/nginx/Manifest
@@ -1,5 +1,4 @@
-AUX http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch 1166 BLAKE2B 180c0b509ef32afd9cffaa6c922e925101d750ad2b5c93dbad4e16e4d0ccd866efeb3ded3ffff3bf5a4566bbea9e9910dd92ab8f40ec66b2011a6396e472aef1 SHA512 8e9c192e504e6a7e93384104dee544530442c3d7a67f6da81cb79a3cba43f64bbf2a4cba9115c48626b1f6faa3d170da915cfe2a7dceaff453300b400141192d
-AUX http_brotli-detect-brotli-r2.patch 763 BLAKE2B 63e1a86dc6c9607159ef4466dfcfc692fe53ec4019385297dfc92672271e3679b9013c83423b5d9aa79bc912b6d9dda0b099899f3020a8e01872087aad5a64f1 SHA512 ba6794ea39a775a61dd8a30ad183bfb7fae0feeb0a3f5c2cdbfc4d1f4891c11f3da44d31e9470bf443feaca7621a27c8483cce19f8bed00b811f78ccc1188a4e
+AUX http_brotli-detect-brotli-r3.patch 745 BLAKE2B 1442822f9b16362c04354f29f45ee4e7605e0f74ac09092161b9e69a1c3b42f024d12cb64cc5bb0e417200dc963a531110f82b003d54690138b7df35e019e9e3 SHA512 a287636c07335b48303585d906adb87cf9094133c16c238074826aebb19347428bb15ac4ebc77040142c509f8a87c9fbca9783e2f5c10399ef63341fbc22e881
 AUX http_cache_purge-1.11.6+.patch 615 BLAKE2B 520a437290dbed718f392bedecdb66c9eae3440c2e5977bede5829f8420905e60c74fac3dad7b22c12d2070ce47430795482d270222ba8d4640af415e4974210 SHA512 a3f45d8121d89a5c41783306577e146990404ff0e3691454e99cd6270ab02dfc7fd8718b3781666373ea6784ed2c06cec0b40315486a6a138185ca1548c04b60
 AUX http_uploadprogress-issue_50-r1.patch 1098 BLAKE2B f8191fdfa85c7aa016555a636b5c291d6d0ed54fea0714b361ce500deb7431f16c77a2f5675c5dc2f6e8ed278f7c24efd45eba3ddab27a2fa7d4e6d1391cfe8d SHA512 bdc3a129059b1af9c317d1e8b74ec98a14bf1e55b59ae867b963304541457e1676acb775ac2cec730ee2036feedf75d636eeb36700b0913e417045a52a00eec9
 AUX http_upstream_check-nginx-1.11.5+.patch 8557 BLAKE2B b1f21fa56e94d92b30d4b84353066039728b0935e2a243367e4e883afead2d4c728c9b7e7b5b5e8714b80a3af72059a36f8207af3641c22a43324c0e7f2b2f9b SHA512 9b377defaa9ddb78fee3f37e054c7b16258fd380b4093d6d61bc45fdc42cb45ee5246901cddd230dc1765838fabbd71d558b5b1d12d9829615b3501da4f3824a
@@ -9,22 +8,21 @@ AUX nginx.conf-r2 1292 BLAKE2B ad941577401ee99e7904871a20cdf94e946f608747c14e7ce
 AUX nginx.confd 1131 BLAKE2B fd9c9e620a0b8c630a609c3f38f91f62babfed12d4d8035f8c54609a9360b28a919cf2020c577575bdab70cdd9c34e5996852d6d35dc9f2f52a2096c9facccfd SHA512 9023b33b6e03de4fa4df8459118a34a24a52ec167eb0aa1d220fd5ba8555aa454ca3451cad4eecc87a445b74cae5132fd717286aec3f1fea390eb96547e4ae85
 AUX nginx.initd-r4 2192 BLAKE2B b482b9cc473a1df06764d60c7ce5c99a3f680778028bf440a2612b86273936ac4dbb350b81ecbe646dfa67d375492259b1609f3953f1b456c7427a02dd282d37 SHA512 e641829466e54093ad01e9f6c57acd2f0505e489a32e67dfee9279d5da57b216052a92eb05eb0c9c122c12f8b7bf8274b520b6e02fda161cc03187ce7c0660f1
 AUX nginx.logrotate-r1 257 BLAKE2B d62c57377efd5259b6c776861d921b6e4ea026387157d618abd9e578f2e432ac0cf653a0f3842a0620d405759216bdc17afd50b33aaec3ad0c6757dfac3e34d8 SHA512 4892fc1700817c9a459a531df0320fe606a51be7f8b4e3ddf5852fe33def70dbff36fcefd2fce247c6846d6315ea92f3421eb21299a162d082b85fa27572cd95
-AUX nginx.service-r1 327 BLAKE2B 081c72f7f7b98e30b2b45aeb8b1e4ead935c5b9a558fcfc7c18c20a2c0f18711272e91f4688c04c7f0eb833be8f7daff2f7d01bd1a04981f03ed54a07fe1148c SHA512 9b6bcf74df2f74ae6a2c255ebf2d826ea92ed9921b9995da6c9a0c5656e2863a2fe5293ef8a656fbd36298602cc88ffc5d7acfbbf143c23a78c9689d61b05df9
+AUX nginx.service-r1 356 BLAKE2B 05d89efcc73b70a26655f306f1e074e61c81063cb4e949161efbe95dc375e63807233f38c9af6723801e8f653cfad08f62fbec225b061d1179b7d05fe761afc4 SHA512 e51f4e88abe10555afe79d4d029651a4de42a5dc1dddaf951f13c021453da00e0c56a3fa2129d08fcd090909a54564e76887c93fdf72952021f5a2b09f6097eb
 DIST modsecurity-2.9.3.tar.gz 4307670 BLAKE2B 337ea15cc8805af7ab43aed8aecf4c72ccc586d0d7e9d9b91f036a61baa70d1ac8b4ad8045a2bb7a13515912a15fba7d3cdb9670ae6730de43b1e44ee90ded6d SHA512 4e1ea5dd8edadf8f630e4fe92a200d3a8e78963fce3128b5975a1e1ecd0e8bf9ceecd9905c95f8c508932ccd837f1d8ae8bb2ba423307718c3c6a4ae9b783ddd
-DIST nginx-1.16.1.tar.gz 1032630 BLAKE2B 838c5f08b56378dd3ef3940a979eb1449c4ed7ef5b4b112da2531c0996d121ae32ae4e94d3b4ba198fefcdc1b06683e4b0cfa0087db82fcab13bffb5f67f8aa4 SHA512 17e95b43fa47d4fef5e652dea587518e16ab5ec562c9c94355c356440166d4b6a6a41ee520d406e5a34791a327d2e3c46b3f9b105ac9ce07afdd495c49eca437
-DIST nginx-1.17.3.tar.gz 1034586 BLAKE2B 48d1c34cf345794bc345bedb96a6a194f175695b93ee5114095742d67384e81fe87cc1ec10553566a33dbabc2a784158bc1461e2001d67dda71af4a1f540a88d SHA512 b81e75c4c8c03ca2f0b40b9c2a1812cf168cb2319d7246b9b0cce838ef7dba81f3cd57a213ec8d58e457a0fa6b912adff2e5597e5ada7258cfe27f55b05205e2
-DIST nginx-1.17.4.tar.gz 1034845 BLAKE2B 59e32fc4a625ec91696d3c18beb270ab2980f3a33a2952e8f43ce24e5a6a7fecff774ee20b1377dbfc0cee58651c78bb6d2cd2505f32a96966a200dce9569267 SHA512 fb7275c47d2416b597415f736771f8f4f3cdbba33728d9ca8ddb56b8266076a5ec5e63c735215a8d022f685b67d663fdaaac0c95db465a82f79f01d502feaa82
-DIST nginx-1.17.5.tar.gz 1036056 BLAKE2B 7f5c804651011a28d0d6e166a13e082f74173c0e447a88f013fa505e32994f65c159d755c473fa50eb7dc293c554961da23e61b1d59a429985ca6fc82fe69145 SHA512 b6799ddce7135646aa1f0b4405bcdab41d5065fbadcdeeb875f6fae4953159aa57b9104afe815748b0aab0e4d532e7771ccce487d7c4519e423d110f3715da7c
+DIST nginx-1.18.0.tar.gz 1039530 BLAKE2B a8962a6af96acb043ff0c3dc4ad5192083773c449950aff53b01f6f7c46a2a540eb061a43432acccd753fa71067b1451d75f440ba5526575b78608be9d40a50b SHA512 8c21eeb62ab6e32e436932500f700bd2fb99fd2d29e43c08a5bfed4714c189c29c7141db551fcd5d2437303b7439f71758f7407dfd3e801e704e45e7daa78ddb
+DIST nginx-1.19.6.tar.gz 1055982 BLAKE2B 6d818122b3bdf46b6c9ecb83a00d470b3db0f26f05140340c033d1d0851d679d077ce1853f8d0a1c0140bfdac2764e5702913e87149dccefda2c6f7bf8ac8845 SHA512 1249c56b124a8de71f5d722e53d599f3b0cb14dc0f95b1eb905a6a8019b2d33f8e76874de2a88d49c4c82ee4fa7aabd42e5044a0a110892c23b50f71cb632148
 DIST nginx-auth-ldap-42d195d7a7575ebab1c369ad3fc5d78dc2c2669c.tar.gz 18457 BLAKE2B 22225ca9e5299b20ab5a93a001cac48e446bd86b3a24ac49e716bc975b128890bdb4b0dbbf5730fbaaeadfd958160093c7a6af798dd0e6de27062f149a760333 SHA512 ec59637fda5acac053e815cb1d04b545fc6b765e5ec63d8c2c9c301abad87afaa2698145acac08e9e14c91e1423ebff7aff0cca2b940b19ccccbf4cf53973269
 DIST nginx_http_sticky_module_ng-1.2.6-10-g08a395c66e42.tar.bz2 124047 BLAKE2B d37ef9a15c91abe3c6258e420d1f99fa452f9d9966a0e13102174973314a3bac5413957a5fe632a9dcb1163b3be5df8116e05cc053ee061e19319ec25f341570 SHA512 6c1bfdcf89884b2855d51ae7da0f6e53a4ca3629e1aaf58433b70c07dcb2af797ba6e87d9b3eb4fe2fb6d4d697e862f2b4c2f8d8b3fdaea201740c97ec936529
-DIST ngx_brotli-8104036af9cff4b1d34f22d00ba857e2a93a243c.tar.gz 12672 BLAKE2B fa2febfa63b98303f8890c6774de6ccb09475ccd639d3b74493a4ffd97c90febdc22755c5928018bdac24a537bd13cde165f97e5d2b50bebf598c3fb22ec0206 SHA512 169566b8764bb2b82e029f954a99063a9c61e2cbf982861c5f6818b389a5f37bf5389afb1b5627de9bd3f7af7b3c404be0230f943d47ab621c2a2bd825cc8203
+DIST ngx_brotli-1.0.0rc.tar.gz 16207 BLAKE2B 450d0ea693bd98d4a1b615f2cdcaad41ccd28266f6d80beec7fe77fe750ab8c5d1bb55aabe15161b9b6d819d2b4d99a7774f2706f2f6fd084b52a7c7dddbc00c SHA512 05a880d5e48ac83be84498ed41fb4750211b827a9d7541acfd6ef494e5205a6e853d5594bfec3ab4ae668ea3f803e4f4b0ba550c76811971c8e266e42663c56d
+DIST ngx_brotli-25f86f0bac1101b6512135eac5f93c49c63609e3.tar.gz 16201 BLAKE2B 2da3ce8a9f29b713da4de4cd60fe22256742ff61e1718346e5246ffa0169d5a2e1babb625b16ac52e3b79431f749adb3ee0170957024953c139aaebc7a496478 SHA512 c6eb026f204e1e6f930ab7ca68cca78054318e05a0dc11d897d3516380dbc4e42e93d40334e3088bf348d4b7b182e87c77473974719e5850a4f97666f9babbd6
 DIST ngx_devel_kit-0.3.1.tar.gz 66542 BLAKE2B 8242d884464d99a131a48f599f9d0c2b546610f73f646e7eb0dcfdb98220810d949189cffa721360ddbe3b7b8adc8b678a848b9d1a56db6c62fd4439ecb63d24 SHA512 de1e3349d8dd08e5982279b2219dc8a8006739f0409b8e0f5c50d93434beff1fbafba43e9c5ac85a5fab90afc5c0a7244a340610339c36f82f2cba7233e72de9
-DIST ngx_http_auth_pam-1.5.1.tar.gz 6863 BLAKE2B 00807cc3db8f6c007c968b8a30d7f6094b7d9db4eaa60d211fcb3ac60aeb28c5f8193578a7e1ca67acbbf57a319c8442fe44efc1e193927c3bce5961539f9c16 SHA512 973b94874d8a58c0df0ac2d31571eafc1e80b11179cba33ec88421a826207fbf7e99b0387e135a1ca48d82daacb78f19a4c21d3a27b49b16dc86b4748bb72261
+DIST ngx_http_auth_pam-1.5.2.tar.gz 7016 BLAKE2B 1efc8d2d12aa09a2b2a36f6f6d0132ac21fcd1720a2843ce598450198e2b7fe902e9ded15a78b66e8a897e811faa872e4e391bf211c795e320c1ccd57607c319 SHA512 b82e401533c44298c41bc9a1caaf3f7850e42da151c06a77a927f817810ebf5ce01c49ca81de42c326345765c784bb55e28fbf0f6a5500626f51e58a216b53c4
 DIST ngx_http_cache_purge-2.3.tar.gz 12248 BLAKE2B f83b267f4c19a9d4af5964522695814c164d200ecd4108bf8f6b5c21388eba8af989bdda646dee18a03174211e8c090a04736bbeb44043cb0e19fbccdc66278e SHA512 50a31dbf2216a6fae74a186af56dec4600cf55777e76a10ac0075f609e7737135aab063a64f2590dddcd0369ebebd4a523027f3d9ebcca74f7b4355be1c5dcc0
 DIST ngx_http_dav_ext-3.0.0.tar.gz 14558 BLAKE2B 0d370bfe34600d43a540dd19a386aa52ce135b2eae14e4e108a359d5ff3405939130d1c802062c7523057ec35d38322d3fbed8c13deb58ce7a08ebf9e3f106d4 SHA512 d0193ba90f1ef46c4e470630c4394bdf99d94fd2e3bd8be6cb2ba1655ec59944b1269025f032b79dc2c6dad366e54389ef6a6da2ddeb91d535a4027f2162fbde
-DIST ngx_http_echo-0.61.tar.gz 53155 BLAKE2B 72565b5d79598b5dcd1c10fa0f718e749894ca5f1232d5aae60c61e268b5904af35fdcd35afcf72de93852af9e0ca58805d77cbc37919fba9012158b5545baab SHA512 c90b81a4e85a8e9beeb5ff591dc91adb25fa4e0b6cb47086b577e5fa36db2368442dd011187675e358781956c364b949bc4d920ca2b534481b21c9987d2a9a3b
-DIST ngx_http_fancyindex-0.4.3.tar.gz 25274 BLAKE2B 5ce3102326f6b8cc2b333ed08f7a66476842d2c70089175e577a3ba958317ed702f24ece002506007eb45e9e50b8f6ecb137cde222566308986cba2682b70f7d SHA512 fe5f6afc29c99f66151c1a06e27b5749b0a16227638583d9c961adc94b2942b981184382f95e70d927f00b09b43f597b963a85a41bde5903b10e42f86bc321f1
-DIST ngx_http_geoip2_module-3.2.tar.gz 8465 BLAKE2B 93d1fb9573e9dbd932670a595d2c0341571eaa2e079ed98e85e282712dc0cdfb798d59ccc2ae7466dab23e093c2eec17d1694f2748d80683928ad135b70b0bfc SHA512 84b26955234e29dbfbf2431b652fcc453c5e86b95f837296df4f3d6c730e3e0773223dae890eebfc9b5763f46082bde6f38d6505b8bf78133b89e7297016cc5d
+DIST ngx_http_echo-0.62.tar.gz 53329 BLAKE2B 7d92184f7fb878cb5261be1c68de4432d472469028e20c2150925ab3d9a1c472ef557a11b84ee60d7ae6b48d08b35890c50161540668918492f2092dd0272962 SHA512 240896b1c559a71ca6ca87136d8535edd25b1d65ebb80d46080ad41c09ed1cec9737828f9efe260782294d660cea66cf402f4e75bba3fed26f3a94de0ae2f89b
+DIST ngx_http_fancyindex-0.4.4.tar.gz 26292 BLAKE2B a1ed76cb31cd4f7a349bcbe63d75f8e00331d0ba4ee9b7b1df41dac77fe64ebe6c72a6fd5f6ebc9de53e8d3a8a2ad5185fbaa533d8ff008fcf92f6956f267d80 SHA512 bf8ebb188c10fee5e6ebcb338fe20fdf859bb88d9b2b0e3da6f3e2f1847738d30760d2642d0dfe257092bdf2399b561631556a3a8e2fb33dc9cd0c59d371c173
+DIST ngx_http_geoip2_module-3.3.tar.gz 8509 BLAKE2B 4841e1bdd13b9b85f34732d1eb7447638f62bb09e1bd480da0fa8b0085d3b2d90a740732ef534c355feb71d7db613c73f68a4e6e3624b47a0937be046dfa1f8d SHA512 06963b598c54e22d75ce837fb222f5aa6c9494c29e558ff46f1205d7159fc305414bfac4ed3288c836dcbf7628d92f26458e1992d34fc2f4b73275a32847bdc0
 DIST ngx_http_headers_more-0.33.tar.gz 28130 BLAKE2B fe3097a7700ce5da087058f7bb44c95164b75137031187400473f6833bf0e33e5c4920807225a6ff94174fe7dbd6186cca176a33a629ca0911faab6804bdd12a SHA512 13165b1b8d4be281b8bd2404fa48d456013d560bace094c81da08a35dc6a4f025a809a3ae3a42be6bbf67abbcbe41e0730aba06f905220f3baeb01e1192a7d37
 DIST ngx_http_lua-0.10.15.tar.gz 655110 BLAKE2B 73bf8e2f157c93f3d4e54b5aa63deb266731a10e3e48b2257756efee8d752e86440ca9c27bd27bc1d90075a5ffb58772eecb7c445db44cd055d2b9e0b4bac082 SHA512 1feea538464275e6e571860592628ad639b2259c8aab7f38575b81c0b355f1ade32a91643267bc9ec16519e3bcf3d132511513dc8c949f74a3bff975c85d8ff7
 DIST ngx_http_naxsi-0.56.tar.gz 192120 BLAKE2B cdbfc278f346ccdc0d5407d70ddd4740816d9fe786d3d65189d47e6f3b030c02352a30ed86bf1650139a21a8408e74c1ec7d7aa3512df1428870279ab384dd15 SHA512 4660751849bce303af6010b7257532404710106a94817e78d4bc4b566f8019620f24f30207f1d4366b88132a5124e34b164dc67ed80b6710f4bad66115564cbd
@@ -37,11 +35,9 @@ DIST ngx_memc_module-0.19.tar.gz 34654 BLAKE2B 536384c264d88535179634d459d3a47b1
 DIST ngx_metrics-0.1.1.tar.gz 2964 BLAKE2B 95d71ea26c949c345b83e353bd66a20df18cc8b2b93f692615a1b39c1f327393647f80e7a27e6929799a6e7e3469b61e1cd72f7821f7a820da4dd7cd9a96d85c SHA512 d36a8fb0104c83b6b564e03b351aa750cab08650264c74d6f786af357bfb7006b531a93270dd961896ea8dafe27e5db8548ede714c5f52c4742876bc73af4b5e
 DIST ngx_mogilefs_module-1.0.4.tar.gz 11208 BLAKE2B e0729b66554c8890727190a624d4c9aef6499dfc2e301541a9bfc15690caf6d3155c8a4b8f7a1555a7655b47aa0cd1b797aeb8ba82efa92ab80808218a0bdcff SHA512 b8cb7eaf6274f4e2247dbcb39db05072d2b2d4361256a325fafab5533d7ce0c4ae9e2905b954dfcfa4789c9cab5cccf2ac1c3a1f02f6a327ed95b562d7773ed1
 DIST ngx_rtmp-1.2.1.tar.gz 519919 BLAKE2B 744ccb8031eb9653f158f9eceba64fc9c8af7b9a42e64ef996ab3bbbe1402e5ffd3efcc8e4aaca437eb5e208e4b6f2d8643fcca953b32f32543eaa1ae4d9505c SHA512 4a0af5e9afa4deb0b53de8de7ddb2cfa6430d372e1ef9e421f01b509548bd134d427345442ac1ce667338cc2a1484dc2ab732e316e878ac7d3537dc527d5f922
-DIST ngx_xsltproc-0.16.tar.gz 535696 BLAKE2B e692c866dd1e7e3a1ea99c51ccaf74d04b86e003857ec0a81e4f9c9b2c66ef7a8942b38aaf0839a6fa8a9dbe5b57490b836dd9e2c37773e76da9a24c1cb3b250 SHA512 6f3c83f69ffa356d9fd32130e6a49b5948047de15c11272223bbdd4eaeb8404422e1e02bf688c86a19fd8f8bb6e3727f8247ec697fa54c364395daa64ed0f971
-DIST njs-0.3.5.tar.gz 339177 BLAKE2B 6327be0b7c8077870408722376782bca579a6cfdf1fe2a4950fc0d289311ad21f671bc2b47d06f70d95d4f68d99e8c70fd4598dcc167b79c57704d99a098d284 SHA512 236e0284f251856f74eb51d8251bb5be725d2ca90056f2feef7677eb636a4e97e203f3bba81fb6b677158d615dc2d6ffcb0dc1059fb678ab12b7d14cc4ea7241
-DIST njs-0.3.6.tar.gz 354475 BLAKE2B a2f3be7c83dd46bb8a7300460b580e053eaa78f2bcc835dd7b586457f045ea63eaa591873041648e3aa3aefce1d47a999b52667adfccadf0439066bfbff73673 SHA512 1973824bb434e9640626c132dac932da7615b534486ab76081a075be4f4e9fdf75a9a400c0d504750a5da341cebb20e6357710149e6de66ac8df8ee4cb1576bb
-EBUILD nginx-1.16.1-r100.ebuild 41440 BLAKE2B fa49fb782cca968cc0b4b58092cb49214344fcdc80059d2fee2296e6541443af94ff1c2b61a59f673af6317d1bf58ca11bbb369cd1e9e6631cd8cb3d2b38e3ff SHA512 95365ab2f45944d19c875421494adab3708ca5b18b8290f8187d1d4f319408ead11ab7abf4086afd963daee7ebc04fa293c198b36d5eab060b7518dd0fca71da
-EBUILD nginx-1.17.3-r100.ebuild 41442 BLAKE2B 6eef782a638951d80c8d0a204326543f45af8e641a7a1c4a2057b1d794c8458e14116de0d4a51d02b0ff79460cc0fd3a8a7b5f43791a327700a185f78f56a8f6 SHA512 e3534d38f13635c3f63886a25395b3ae0fc7b69426626e00708d0287afd67cc948012c01c9482d534fb0a016f55050ab665cbb5cca000d34e89ee199865d3794
-EBUILD nginx-1.17.4-r100.ebuild 41442 BLAKE2B 6eef782a638951d80c8d0a204326543f45af8e641a7a1c4a2057b1d794c8458e14116de0d4a51d02b0ff79460cc0fd3a8a7b5f43791a327700a185f78f56a8f6 SHA512 e3534d38f13635c3f63886a25395b3ae0fc7b69426626e00708d0287afd67cc948012c01c9482d534fb0a016f55050ab665cbb5cca000d34e89ee199865d3794
-EBUILD nginx-1.17.5-r100.ebuild 41442 BLAKE2B fc330b4f55ad401bd0bef3a54dfd895546d961de8177c9d88d4ec5a92cbfe715099026ed7b5f80addff8731cf5d3f8097b5adfdfaa6410706c41a820e60a66dc SHA512 45939f26f65332d3e10a47cd5970f567176adf144026333e44e83675e69c92217d9040b25a1e148f9d2bd365542d0196eb3f4a0154402382d6849c974c8e0524
-MISC metadata.xml 1310 BLAKE2B 6f40252a833a188f4b62cb2f2a126f93e68cdcd0e3575febdc371106c82d7ebdc6931b162a5ef8070fb6fe1f18e969191f67d3ccdd5e55712dc4d209c16c34c9 SHA512 10403ec29eaa83eb45b7b0b78340103b226145b52b3795e18b1e8bf272efa83586bc190e6e66061f33544434e3c2f94d2229be988733713578e9bb495ce7219c
+DIST ngx_xsltproc-0.17.tar.gz 535750 BLAKE2B c89aeed544f9d00f3a7f930f88d6e0c1320b7059e92e6666aa4a73659a000f1ea7f6e601d9670857a4a5ceb4ef05d7f92fa67804b5407c3bae70e367f8eb1ad3 SHA512 fca3051631b24b7ecf9458837081a7986abb535c025910ed0e1e5f1fb01670a266ebd0fdba6ef99336c540f15bf8529465a2c64f8151aca1d505bc8bba83310e
+DIST njs-0.4.3.tar.gz 460997 BLAKE2B 373a4aca51ada84d628ae6b6254c9268b4cec4ac8870f81ba43ff693f20148a9ca862038e57a68c22cbff29ea613785e83778cc708cf1b47103e9f950a198289 SHA512 b3b4294817997a06661f00f53d38e0cde08e022f41b3663f9d17a91b343fb944e21184114f09d89995096faee491187c3ae424407f2855ed0670c0cccf928cd7
+DIST njs-0.5.0.tar.gz 505568 BLAKE2B 5dc2a91bffa4eb2364d96e26def0959b111cc8bf88841f581e3c0d43fcb88ba1ea24b24339cb1f51b8290c08dd930dc18a274a7ab6a21ee4ba8b0e6c4f5a1ba0 SHA512 182a64ba519b1a1d29ac71ffe2c9ef8e5a6f9aaf3db9f327ac926114db73b339a424801b558068fc7ae06ae88a4dea0a601c749db4b6f2b579e427181e41d11b
+EBUILD nginx-1.18.0-r999.ebuild 41366 BLAKE2B 300c5e1a0817ac37e23c4bea9333ae79fab4e99ecfd15e93fccb0601c48ea724b40e8edb2a7fe2e99b3f804eee0711f2fa00e7c55efcbf549322a3ec17b1e4e5 SHA512 74d52eed15beb7a6aa95484d1d7d36960c32b8ae30ebcfd85ca136df0c565b92aa25b15686c45f10a476e2589d507783b0bea88082510c5f6adca5116d85db64
+EBUILD nginx-1.19.6-r999.ebuild 41339 BLAKE2B af455283f7f35739bbf507a23e1838316e4bafa50bfc8579a829836f31e4f2a3e4d8478717060362975191801bd6f4fcc682d92b7ad0673baf197e73c4c2f8cb SHA512 07639999842e2edc90e5992afd722777310c6e0c5cb832345aee47781dcb8a1fd037606fcc07f829af2178f8e7fb536ced6f88d25773b44037d84a6a2061e0ba
+MISC metadata.xml 1193 BLAKE2B aeb293cf75ed650c946910222d6396f726dc5ed49f1213e6a5664613d78e3b27616399bc1c9f0a360f5303b16931da7016cdf540b24601afafc3ada4428b33a9 SHA512 a96002bc9845bc465542c753c738899b77ad7a32fac7f5f9a7049336868bc41199e926422e3dc23e47f34656c9aaea255511d2ef91e9d59f48c9cd0b4a3c4903
diff --git a/www-servers/nginx/files/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch b/www-servers/nginx/files/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
deleted file mode 100644
index 632dcde..0000000
--- a/www-servers/nginx/files/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-https://github.com/sto/ngx_http_auth_pam_module/pull/18
-
---- a/ngx_http_auth_pam_module.c
-+++ b/ngx_http_auth_pam_module.c
-@@ -348,7 +348,7 @@ ngx_http_auth_pam_authenticate(ngx_http_request_t *r,
-     /* try to authenticate user, log error on failure */
-     if ((rc = pam_authenticate(pamh,
-                                PAM_DISALLOW_NULL_AUTHTOK)) != PAM_SUCCESS) {
--        ngx_log_debug2(NGX_LOG_DEBUG_HTTP, r->connection->log, 0,
-+        ngx_log_error(NGX_LOG_ERR, r->connection->log, 0,
-                       "PAM: user '%s' - not authenticated: %s",
-                       ainfo.username.data, pam_strerror(pamh, rc));
-         pam_end(pamh, PAM_SUCCESS);
-@@ -357,7 +357,7 @@ ngx_http_auth_pam_authenticate(ngx_http_request_t *r,
- 
-     /* check that the account is healthy */
-     if ((rc = pam_acct_mgmt(pamh, PAM_DISALLOW_NULL_AUTHTOK)) != PAM_SUCCESS) {
--        ngx_log_debug2(NGX_LOG_DEBUG_HTTP, r->connection->log, 0,
-+        ngx_log_error(NGX_LOG_ERR, r->connection->log, 0,
-                       "PAM: user '%s'  - invalid account: %s",
-                       ainfo.username.data, pam_strerror(pamh, rc));
-         pam_end(pamh, PAM_SUCCESS);
diff --git a/www-servers/nginx/files/http_brotli-detect-brotli-r2.patch b/www-servers/nginx/files/http_brotli-detect-brotli-r2.patch
deleted file mode 100644
index 8774fa6..0000000
--- a/www-servers/nginx/files/http_brotli-detect-brotli-r2.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/config
-+++ b/config
-@@ -59,13 +59,7 @@ have=NGX_HTTP_BROTLI_STATIC_MODULE . auto/have  # deprecated
- ngx_module_type=HTTP_FILTER
- ngx_module_name=ngx_http_brotli_filter_module
- 
--brotli="/usr/local"
--
--if [  -f "/usr/include/brotli/encode.h" ]; then
--
--brotli="/usr"
--
--fi
-+brotli=$(pkg-config --variable=prefix libbrotlienc)
- 
- if [ ! -f "$brotli/include/brotli/encode.h" ]; then
- 
-@@ -75,11 +69,7 @@ if [ ! -f "$brotli/include/brotli/encode.h" ]; then
- cat << END
- 
- $0: error: \
--Brotli library is missing from the $brotli directory.
--
--Please make sure that the git submodule has been checked out:
--
--    cd $ngx_addon_dir && git submodule update --init && cd $PWD
-+Brotli library not found. Don't you have app-arch/brotli installed?
- 
- END
-     exit 1
diff --git a/www-servers/nginx/files/http_brotli-detect-brotli-r3.patch b/www-servers/nginx/files/http_brotli-detect-brotli-r3.patch
new file mode 100644
index 0000000..9ccb8c2
--- /dev/null
+++ b/www-servers/nginx/files/http_brotli-detect-brotli-r3.patch
@@ -0,0 +1,28 @@
+--- a/filter/config
++++ b/filter/config
+@@ -42,22 +42,13 @@ fi
+ ngx_module_type=HTTP_FILTER
+ ngx_module_name=ngx_http_brotli_filter_module
+ 
+-brotli="$ngx_addon_dir/deps/brotli/c"
+-if [ ! -f "$brotli/include/brotli/encode.h" ]; then
+-  brotli="/usr/local"
+-fi
+-if [ ! -f "$brotli/include/brotli/encode.h" ]; then
+-  brotli="/usr"
+-fi
++brotli=$(pkg-config --variable=prefix libbrotlienc)
++
+ if [ ! -f "$brotli/include/brotli/encode.h" ]; then
+ cat << END
+ 
+ $0: error: \
+-Brotli library is missing from the $brotli directory.
+-
+-Please make sure that the git submodule has been checked out:
+-
+-    cd $ngx_addon_dir && git submodule update --init && cd $PWD
++Brotli library not found. Don't you have app-arch/brotli installed?
+ 
+ END
+     exit 1
diff --git a/www-servers/nginx/files/nginx.service-r1 b/www-servers/nginx/files/nginx.service-r1
index 797c7ed..e160af7 100644
--- a/www-servers/nginx/files/nginx.service-r1
+++ b/www-servers/nginx/files/nginx.service-r1
@@ -7,6 +7,7 @@ Type=forking
 PIDFile=/run/nginx.pid
 ExecStartPre=/usr/sbin/nginx -t
 ExecStart=/usr/sbin/nginx
+ExecStartPost=/bin/sleep 0.1
 ExecReload=/bin/kill -HUP $MAINPID
 ExecStop=/bin/kill -QUIT $MAINPID
 
diff --git a/www-servers/nginx/metadata.xml b/www-servers/nginx/metadata.xml
index 3eb0471..3958772 100644
--- a/www-servers/nginx/metadata.xml
+++ b/www-servers/nginx/metadata.xml
@@ -5,10 +5,6 @@
     <email>whissi@gentoo.org</email>
     <name>Thomas Deutschmann</name>
   </maintainer>
-  <maintainer type="person">
-    <email>dev-zero@gentoo.org</email>
-    <name>Tiziano Müller</name>
-  </maintainer>
   <use>
     <flag name="aio">Enables file AIO support</flag>
     <flag name="http">Enable HTTP core support</flag>
diff --git a/www-servers/nginx/nginx-1.16.1-r100.ebuild b/www-servers/nginx/nginx-1.16.1-r100.ebuild
deleted file mode 100644
index 97ac446..0000000
--- a/www-servers/nginx/nginx-1.16.1-r100.ebuild
+++ /dev/null
@@ -1,1108 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-# Maintainer notes:
-# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
-# - any http-module activates the main http-functionality and overrides USE=-http
-# - keep the following requirements in mind before adding external modules:
-#	* alive upstream
-#	* sane packaging
-#	* builds cleanly
-#	* does not need a patch for nginx core
-# - TODO: test the google-perftools module (included in vanilla tarball)
-
-# prevent perl-module from adding automagic perl DEPENDs
-GENTOO_DEPEND_ON_PERL="no"
-
-# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
-DEVEL_KIT_MODULE_PV="0.3.1"
-DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
-DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-
-# ngx_brotli (https://github.com/eustas/ngx_brotli, BSD-2)
-HTTP_BROTLI_MODULE_PV="8104036af9cff4b1d34f22d00ba857e2a93a243c"
-HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-HTTP_BROTLI_MODULE_URI="https://github.com/eustas/ngx_brotli/archive/${HTTP_BROTLI_MODULE_PV}.tar.gz"
-HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-
-# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
-HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
-HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
-HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
-HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
-
-# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
-HTTP_HEADERS_MORE_MODULE_PV="0.33"
-HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
-HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
-HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
-
-# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
-HTTP_CACHE_PURGE_MODULE_PV="2.3"
-HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
-HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-
-# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
-HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
-HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
-HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-
-# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
-HTTP_FANCYINDEX_MODULE_PV="0.4.3"
-HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
-HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-
-# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
-HTTP_LUA_MODULE_PV="0.10.15"
-HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
-HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
-HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
-
-# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
-HTTP_AUTH_PAM_MODULE_PV="1.5.1"
-HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
-HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
-HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
-
-# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
-HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
-HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
-HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-
-# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
-HTTP_METRICS_MODULE_PV="0.1.1"
-HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
-HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-
-# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-
-# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
-HTTP_NAXSI_MODULE_PV="0.56"
-HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
-HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
-HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
-
-# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
-RTMP_MODULE_PV="1.2.1"
-RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
-RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
-RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
-
-# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
-HTTP_DAV_EXT_MODULE_PV="3.0.0"
-HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
-HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
-HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
-
-# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
-HTTP_ECHO_MODULE_PV="0.61"
-HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
-HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
-HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
-
-# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
-# keep the MODULE_P here consistent with upstream to avoid tarball duplication
-HTTP_SECURITY_MODULE_PV="2.9.3"
-HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
-HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
-HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
-
-# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
-HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
-HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
-HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
-HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
-
-# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
-HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
-HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
-HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
-HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
-
-# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
-HTTP_MOGILEFS_MODULE_PV="1.0.4"
-HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
-HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-
-# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
-HTTP_MEMC_MODULE_PV="0.19"
-HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
-HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
-HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
-
-# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
-HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
-HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
-HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-
-# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
-GEOIP2_MODULE_PV="3.2"
-GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
-GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-
-# njs-module (https://github.com/nginx/njs, as-is)
-NJS_MODULE_PV="0.3.5"
-NJS_MODULE_P="njs-${NJS_MODULE_PV}"
-NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
-NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
-
-HTTP_XSLTPROC_MODULE_PV="0.16"
-HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
-HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
-HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
-
-# We handle deps below ourselves
-SSL_DEPS_SKIP=1
-AUTOTOOLS_AUTO_DEPEND="no"
-
-inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
-
-DESCRIPTION="Robust, small and high performance http and reverse proxy server"
-HOMEPAGE="https://nginx.org"
-SRC_URI="https://nginx.org/download/${P}.tar.gz
-	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
-	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
-	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
-	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
-	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
-	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
-	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
-	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
-	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
-	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
-	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
-	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
-	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
-	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
-	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
-	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
-	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
-	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
-	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
-	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
-	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
-	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
-	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
-
-LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
-	nginx_modules_http_security? ( Apache-2.0 )
-	nginx_modules_http_push_stream? ( GPL-3 )"
-
-SLOT="0"
-KEYWORDS="amd64 ~arm ~arm64 ~ppc ~ppc64 x86 ~amd64-linux ~x86-linux"
-
-# Package doesn't provide a real test suite
-RESTRICT="test"
-
-NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
-	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
-	proxy referer rewrite scgi ssi split_clients upstream_hash
-	upstream_ip_hash upstream_keepalive upstream_least_conn
-	upstream_zone userid uwsgi"
-NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
-	gzip_static image_filter mp4 perl random_index realip secure_link
-	slice stub_status sub xslt"
-NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
-	upstream_hash upstream_least_conn upstream_zone"
-NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
-NGINX_MODULES_MAIL="imap pop3 smtp"
-NGINX_MODULES_3RD="
-	http_auth_ldap
-	http_auth_pam
-	http_brotli
-	http_cache_purge
-	http_dav_ext
-	http_echo
-	http_fancyindex
-	http_geoip2
-	http_headers_more
-	http_javascript
-	http_lua
-	http_memc
-	http_metrics
-	http_mogilefs
-	http_naxsi
-	http_push_stream
-	http_security
-	http_slowfs_cache
-	http_sticky
-	http_upload_progress
-	http_upstream_check
-	http_vhost_traffic_status
-	stream_geoip2
-	stream_javascript
-	http_xsltproc
-"
-
-IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
-	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
-
-for mod in $NGINX_MODULES_STD; do
-	IUSE="${IUSE} +nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_OPT; do
-	IUSE="${IUSE} nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_STD; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_OPT; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_MAIL; do
-	IUSE="${IUSE} nginx_modules_mail_${mod}"
-done
-
-for mod in $NGINX_MODULES_3RD; do
-	IUSE="${IUSE} nginx_modules_${mod}"
-done
-
-# Add so we can warn users updating about config changes
-# @TODO: jbergstroem: remove on next release series
-IUSE="${IUSE} nginx_modules_http_spdy"
-
-CDEPEND="
-	pcre? ( dev-libs/libpcre:= )
-	pcre-jit? ( dev-libs/libpcre:=[jit] )
-	ssl? (
-		!libressl? ( dev-libs/openssl:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http2? (
-		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http-cache? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_brotli? ( app-arch/brotli:= )
-	nginx_modules_http_geoip? ( dev-libs/geoip )
-	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_gunzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip_static? ( sys-libs/zlib )
-	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
-	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
-	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
-	nginx_modules_http_secure_link? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
-	nginx_modules_http_lua? ( dev-lang/luajit:2= )
-	nginx_modules_http_auth_pam? ( sys-libs/pam )
-	nginx_modules_http_metrics? ( dev-libs/yajl:= )
-	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
-	nginx_modules_http_security? (
-		dev-libs/apr:=
-		dev-libs/apr-util:=
-		dev-libs/libxml2:=
-		net-misc/curl
-		www-servers/apache
-	)
-	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
-	nginx_modules_stream_geoip? ( dev-libs/geoip )
-	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
-	xsltproc-memcached? ( dev-libs/libmemcached )"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-nginx )
-	!www-servers/nginx:mainline"
-DEPEND="${CDEPEND}
-	nginx_modules_http_brotli? ( virtual/pkgconfig )
-	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
-	arm? ( dev-libs/libatomic_ops )
-	libatomic? ( dev-libs/libatomic_ops )"
-PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
-
-REQUIRED_USE="pcre-jit? ( pcre )
-	nginx_modules_http_grpc? ( http2 )
-	nginx_modules_http_lua? (
-		luajit
-		nginx_modules_http_rewrite
-	)
-	nginx_modules_http_naxsi? ( pcre )
-	nginx_modules_http_dav_ext? ( nginx_modules_http_dav )
-	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
-	nginx_modules_http_security? ( pcre )
-	nginx_modules_http_push_stream? ( ssl )
-	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
-
-pkg_setup() {
-	NGINX_HOME="/var/lib/nginx"
-	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
-
-	ebegin "Creating nginx user and group"
-	enewgroup ${PN}
-	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
-	eend $?
-
-	if use libatomic; then
-		ewarn "GCC 4.1+ features built-in atomic operations."
-		ewarn "Using libatomic_ops is only needed if using"
-		ewarn "a different compiler or a GCC prior to 4.1"
-	fi
-
-	if [[ -n $NGINX_ADD_MODULES ]]; then
-		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
-		ewarn "This nginx installation is not supported!"
-		ewarn "Make sure you can reproduce the bug without those modules"
-		ewarn "_before_ reporting bugs."
-	fi
-
-	if use !http; then
-		ewarn "To actually disable all http-functionality you also have to disable"
-		ewarn "all nginx http modules."
-	fi
-
-	if use nginx_modules_http_mogilefs && use threads; then
-		eerror "mogilefs won't compile with threads support."
-		eerror "Please disable either flag and try again."
-		die "Can't compile mogilefs with threads support"
-	fi
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
-	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
-
-	if use nginx_modules_http_auth_pam; then
-		cd "${HTTP_AUTH_PAM_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_brotli; then
-		cd "${HTTP_BROTLI_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_brotli-detect-brotli-r2.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		eautoreconf
-
-		if use luajit ; then
-			sed -i \
-				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
-				configure || die
-		fi
-
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upload_progress; then
-		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
-		cd "${S}" || die
-	fi
-
-	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
-	# We have config protection, don't rename etc files
-	sed -i 's:.default::' auto/install || die
-	# remove useless files
-	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
-
-	# don't install to /etc/nginx/ if not in use
-	local module
-	for module in fastcgi scgi uwsgi ; do
-		if ! use nginx_modules_http_${module}; then
-			sed -i -e "/${module}/d" auto/install || die
-		fi
-	done
-
-	if use xsltproc-memcached; then
-		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
-	fi
-
-	eapply_user
-}
-
-src_configure() {
-	# mod_security needs to generate nginx/modsecurity/config before including it
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		./configure \
-			--enable-standalone-module \
-			--disable-mlogc \
-			--with-ssdeep=no \
-			$(use_enable pcre-jit) \
-			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
-
-		cd "${S}" || die
-	fi
-
-	local myconf=() http_enabled= mail_enabled= stream_enabled=
-
-	use aio       && myconf+=( --with-file-aio )
-	use debug     && myconf+=( --with-debug )
-	use http2     && myconf+=( --with-http_v2_module )
-	use libatomic && myconf+=( --with-libatomic )
-	use pcre      && myconf+=( --with-pcre )
-	use pcre-jit  && myconf+=( --with-pcre-jit )
-	use threads   && myconf+=( --with-threads )
-
-	# HTTP modules
-	for mod in $NGINX_MODULES_STD; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-		else
-			myconf+=( --without-http_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_OPT; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-			myconf+=( --with-http_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_http_fastcgi; then
-		myconf+=( --with-http_realip_module )
-	fi
-
-	# third-party modules
-	if use nginx_modules_http_upload_progress; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_headers_more; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_lua; then
-		http_enabled=1
-		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
-		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
-		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
-		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_metrics; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_naxsi ; then
-		http_enabled=1
-		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
-	fi
-
-	if use rtmp ; then
-		http_enabled=1
-		myconf+=( --add-module=${RTMP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_dav_ext ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_echo ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_security ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
-	fi
-
-	if use nginx_modules_http_push_stream ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_sticky ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_mogilefs ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_memc ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_vhost_traffic_status; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
-		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
-		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
-	fi
-
-	if use nginx_modules_http_brotli; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_xsltproc; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
-	fi
-
-	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
-		http_enabled=1
-	fi
-
-	if [ $http_enabled ]; then
-		use http-cache || myconf+=( --without-http-cache )
-		use ssl && myconf+=( --with-http_ssl_module )
-	else
-		myconf+=( --without-http --without-http-cache )
-	fi
-
-	# Stream modules
-	for mod in $NGINX_MODULES_STREAM_STD; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-		else
-			myconf+=( --without-stream_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_STREAM_OPT; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-			myconf+=( --with-stream_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
-		stream_enabled=1
-	fi
-
-	if [ $stream_enabled ]; then
-		myconf+=( --with-stream )
-		use ssl && myconf+=( --with-stream_ssl_module )
-	fi
-
-	# MAIL modules
-	for mod in $NGINX_MODULES_MAIL; do
-		if use nginx_modules_mail_${mod}; then
-			mail_enabled=1
-		else
-			myconf+=( --without-mail_${mod}_module )
-		fi
-	done
-
-	if [ $mail_enabled ]; then
-		myconf+=( --with-mail )
-		use ssl && myconf+=( --with-mail_ssl_module )
-	fi
-
-	# custom modules
-	for mod in $NGINX_ADD_MODULES; do
-		myconf+=(  --add-module=${mod} )
-	done
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	tc-export CC
-
-	if ! use prefix; then
-		myconf+=( --user=${PN} )
-		myconf+=( --group=${PN} )
-	fi
-
-	local WITHOUT_IPV6=
-	if ! use ipv6; then
-		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
-	fi
-
-	if [[ -n "${EXTRA_ECONF}" ]]; then
-		myconf+=( ${EXTRA_ECONF} )
-		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
-	fi
-
-	./configure \
-		--prefix="${EPREFIX}"/usr \
-		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
-		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
-		--pid-path="${EPREFIX}"/run/${PN}.pid \
-		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
-		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
-		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
-		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
-		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
-		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
-		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
-		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
-		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
-		--with-compat \
-		"${myconf[@]}" || die "configure failed"
-
-	# A purely cosmetic change that makes nginx -V more readable. This can be
-	# good if people outside the gentoo community would troubleshoot and
-	# question the users setup.
-	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
-}
-
-src_compile() {
-	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
-}
-
-src_install() {
-	emake DESTDIR="${D%/}" install
-
-	cp "${FILESDIR}"/nginx.conf-r2 "${ED}"etc/nginx/nginx.conf || die
-
-	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
-	newconfd "${FILESDIR}"/nginx.confd nginx
-
-	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
-
-	doman man/nginx.8
-	dodoc CHANGES* README
-
-	# just keepdir. do not copy the default htdocs files (bug #449136)
-	keepdir /var/www/localhost
-	rm -rf "${D}"usr/html || die
-
-	# set up a list of directories to keep
-	local keepdir_list="${NGINX_HOME_TMP}"/client
-	local module
-	for module in proxy fastcgi scgi uwsgi; do
-		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
-	done
-
-	keepdir /var/log/nginx ${keepdir_list}
-
-	# this solves a problem with SELinux where nginx doesn't see the directories
-	# as root and tries to create them as nginx
-	fperms 0750 "${NGINX_HOME_TMP}"
-	fowners ${PN}:0 "${NGINX_HOME_TMP}"
-
-	fperms 0700 ${keepdir_list}
-	fowners ${PN}:${PN} ${keepdir_list}
-
-	fperms 0710 /var/log/nginx
-	fowners 0:${PN} /var/log/nginx
-
-	# logrotate
-	insinto /etc/logrotate.d
-	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
-
-	if use luajit; then
-		pax-mark m "${ED%/}/usr/sbin/nginx"
-	fi
-
-	if use nginx_modules_http_perl; then
-		cd "${S}"/objs/src/http/modules/perl/ || die
-		emake DESTDIR="${D}" INSTALLDIRS=vendor
-		perl_delete_localpod
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		docinto ${HTTP_CACHE_PURGE_MODULE_P}
-		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
-		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		docinto ${HTTP_FANCYINDEX_MODULE_P}
-		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_lua; then
-		docinto ${HTTP_LUA_MODULE_P}
-		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		docinto ${HTTP_AUTH_PAM_MODULE_P}
-		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
-		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
-	fi
-
-	if use nginx_modules_http_naxsi; then
-		insinto /etc/nginx
-		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
-	fi
-
-	if use rtmp; then
-		docinto ${RTMP_MODULE_P}
-		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
-	fi
-
-	if use nginx_modules_http_dav_ext; then
-		docinto ${HTTP_DAV_EXT_MODULE_P}
-		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_echo; then
-		docinto ${HTTP_ECHO_MODULE_P}
-		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_security; then
-		docinto ${HTTP_SECURITY_MODULE_P}
-		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
-	fi
-
-	if use nginx_modules_http_push_stream; then
-		docinto ${HTTP_PUSH_STREAM_MODULE_P}
-		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
-	fi
-
-	if use nginx_modules_http_sticky; then
-		docinto ${HTTP_STICKY_MODULE_P}
-		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
-	fi
-
-	if use nginx_modules_http_memc; then
-		docinto ${HTTP_MEMC_MODULE_P}
-		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		docinto ${HTTP_LDAP_MODULE_P}
-		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
-	fi
-}
-
-pkg_postinst() {
-	if use ssl; then
-		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
-			install_cert /etc/ssl/${PN}/${PN}
-			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
-		fi
-	fi
-
-	if use nginx_modules_http_spdy; then
-		ewarn ""
-		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
-		ewarn "Update your configs and package.use accordingly."
-	fi
-
-	if use nginx_modules_http_lua; then
-		ewarn ""
-		ewarn "While you can build lua 3rd party module against ${P}"
-		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
-		ewarn "officially supported target yet. You are on your own."
-		ewarn "Expect runtime failures, memory leaks and other problems!"
-	fi
-
-	if use nginx_modules_http_lua && use http2; then
-		ewarn ""
-		ewarn "Lua 3rd party module author warns against using ${P} with"
-		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
-	fi
-
-	local _n_permission_layout_checks=0
-	local _has_to_adjust_permissions=0
-	local _has_to_show_permission_warning=0
-
-	# Defaults to 1 to inform people doing a fresh installation
-	# that we ship modified {scgi,uwsgi,fastcgi}_params files
-	local _has_to_show_httpoxy_mitigation_notice=1
-
-	local _replacing_version=
-	for _replacing_version in ${REPLACING_VERSIONS}; do
-		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
-
-		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
-			# Should never happen:
-			# Package is abusing slots but doesn't allow multiple parallel installations.
-			# If we run into this situation it is unsafe to automatically adjust any
-			# permission...
-			_has_to_show_permission_warning=1
-
-			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
-				"You will have to adjust permissions on your own."
-
-			break
-		fi
-
-		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
-		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
-
-		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
-		# This was before we introduced multiple nginx versions so we
-		# do not need to distinguish between stable and mainline
-		local _need_to_fix_CVE2013_0337=1
-
-		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
-			# We are updating an installation which should already be fixed
-			_need_to_fix_CVE2013_0337=0
-			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
-		else
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
-		fi
-
-		# Do we need to inform about HTTPoxy mitigation?
-		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_show_httpoxy_mitigation_notice=1
-			debug-print "Need to inform about HTTPoxy mitigation!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.1-r2"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.3-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that the user has
-					# already seen the HTTPoxy mitigation notice because he/she is doing
-					# an update from previous version where we have already shown
-					# the warning. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation where we already informed
-				# that we are mitigating HTTPoxy per default
-				_has_to_show_httpoxy_mitigation_notice=0
-				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
-			else
-				_has_to_show_httpoxy_mitigation_notice=1
-				debug-print "Need to inform about HTTPoxy mitigation!"
-			fi
-		fi
-
-		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
-		# All branches up to 1.11 are affected
-		local _need_to_fix_CVE2016_1247=1
-
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.2-r3"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.6-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that we have already
-					# adjusted permissions or were never affected because user is
-					# doing an update from previous version which was safe or did
-					# the adjustments. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation which should already be adjusted
-				# or which was never affected
-				_need_to_fix_CVE2016_1247=0
-				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
-			else
-				_has_to_adjust_permissions=1
-				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-			fi
-		fi
-	done
-
-	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
-		# We do not DIE when chmod/chown commands are failing because
-		# package is already merged on user's system at this stage
-		# and we cannot retry without losing the information that
-		# the existing installation needs to adjust permissions.
-		# Instead we are going to a show a big warning ...
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The world-readable bit (if set) has been removed from the"
-			ewarn "following directories to mitigate a security bug"
-			ewarn "(CVE-2013-0337, bug #458726):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn "  ${EPREFIX%/}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX%/}${NGINX_HOME_TMP}'"
-			chmod o-rwx \
-				"${EPREFIX%/}"/var/log/nginx \
-				"${EPREFIX%/}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
-				_has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The permissions on the following directory have been reset in"
-			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "Also ensure that no other log directory used by any of your"
-			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-			ewarn "used by nginx can be abused to escalate privileges!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			chown 0:nginx "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-			chmod 710 "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
-			# Should never happen ...
-			ewarn ""
-			ewarn "*************************************************************"
-			ewarn "***************         W A R N I N G         ***************"
-			ewarn "*************************************************************"
-			ewarn "The one-time only attempt to adjust permissions of the"
-			ewarn "existing nginx installation failed. Be aware that we will not"
-			ewarn "try to adjust the same permissions again because now you are"
-			ewarn "using a nginx version where we expect that the permissions"
-			ewarn "are already adjusted or that you know what you are doing and"
-			ewarn "want to keep custom permissions."
-			ewarn ""
-		fi
-	fi
-
-	# Sanity check for CVE-2016-1247
-	# Required to warn users who received the warning above and thought
-	# they could fix it by unmerging and re-merging the package or have
-	# unmerged a affected installation on purpose in the past leaving
-	# /var/log/nginx on their system due to keepdir/non-empty folder
-	# and are now installing the package again.
-	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX%/}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
-	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
-	if [ $? -eq 0 ] ; then
-		# Cleanup -- no reason to die here!
-		rm -f "${_sanity_check_testfile}"
-
-		ewarn ""
-		ewarn "*************************************************************"
-		ewarn "***************         W A R N I N G         ***************"
-		ewarn "*************************************************************"
-		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
-		ewarn "(bug #605008) because nginx user is able to create files in"
-		ewarn ""
-		ewarn "  ${EPREFIX%/}/var/log/nginx"
-		ewarn ""
-		ewarn "Also ensure that no other log directory used by any of your"
-		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-		ewarn "used by nginx can be abused to escalate privileges!"
-	fi
-
-	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
-		# HTTPoxy mitigation
-		ewarn ""
-		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
-		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
-		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
-		ewarn "are sourcing one of the default"
-		ewarn ""
-		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
-		ewarn "  - 'scgi_params'"
-		ewarn "  - 'uwsgi_params'"
-		ewarn ""
-		ewarn "files in your server block(s)."
-		ewarn ""
-		ewarn "If this is causing any problems for you make sure that you are sourcing the"
-		ewarn "default parameters _before_ you set your own values."
-		ewarn "If you are relying on user-supplied proxy values you have to remove the"
-		ewarn "correlating lines from the file(s) mentioned above."
-		ewarn ""
-	fi
-}
diff --git a/www-servers/nginx/nginx-1.17.3-r100.ebuild b/www-servers/nginx/nginx-1.17.3-r100.ebuild
deleted file mode 100644
index a742359..0000000
--- a/www-servers/nginx/nginx-1.17.3-r100.ebuild
+++ /dev/null
@@ -1,1108 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-# Maintainer notes:
-# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
-# - any http-module activates the main http-functionality and overrides USE=-http
-# - keep the following requirements in mind before adding external modules:
-#	* alive upstream
-#	* sane packaging
-#	* builds cleanly
-#	* does not need a patch for nginx core
-# - TODO: test the google-perftools module (included in vanilla tarball)
-
-# prevent perl-module from adding automagic perl DEPENDs
-GENTOO_DEPEND_ON_PERL="no"
-
-# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
-DEVEL_KIT_MODULE_PV="0.3.1"
-DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
-DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-
-# ngx_brotli (https://github.com/eustas/ngx_brotli, BSD-2)
-HTTP_BROTLI_MODULE_PV="8104036af9cff4b1d34f22d00ba857e2a93a243c"
-HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-HTTP_BROTLI_MODULE_URI="https://github.com/eustas/ngx_brotli/archive/${HTTP_BROTLI_MODULE_PV}.tar.gz"
-HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-
-# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
-HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
-HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
-HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
-HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
-
-# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
-HTTP_HEADERS_MORE_MODULE_PV="0.33"
-HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
-HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
-HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
-
-# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
-HTTP_CACHE_PURGE_MODULE_PV="2.3"
-HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
-HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-
-# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
-HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
-HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
-HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-
-# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
-HTTP_FANCYINDEX_MODULE_PV="0.4.3"
-HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
-HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-
-# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
-HTTP_LUA_MODULE_PV="0.10.15"
-HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
-HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
-HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
-
-# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
-HTTP_AUTH_PAM_MODULE_PV="1.5.1"
-HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
-HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
-HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
-
-# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
-HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
-HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
-HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-
-# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
-HTTP_METRICS_MODULE_PV="0.1.1"
-HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
-HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-
-# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-
-# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
-HTTP_NAXSI_MODULE_PV="0.56"
-HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
-HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
-HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
-
-# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
-RTMP_MODULE_PV="1.2.1"
-RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
-RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
-RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
-
-# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
-HTTP_DAV_EXT_MODULE_PV="3.0.0"
-HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
-HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
-HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
-
-# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
-HTTP_ECHO_MODULE_PV="0.61"
-HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
-HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
-HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
-
-# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
-# keep the MODULE_P here consistent with upstream to avoid tarball duplication
-HTTP_SECURITY_MODULE_PV="2.9.3"
-HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
-HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
-HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
-
-# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
-HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
-HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
-HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
-HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
-
-# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
-HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
-HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
-HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
-HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
-
-# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
-HTTP_MOGILEFS_MODULE_PV="1.0.4"
-HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
-HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-
-# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
-HTTP_MEMC_MODULE_PV="0.19"
-HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
-HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
-HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
-
-# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
-HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
-HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
-HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-
-# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
-GEOIP2_MODULE_PV="3.2"
-GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
-GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-
-# njs-module (https://github.com/nginx/njs, as-is)
-NJS_MODULE_PV="0.3.5"
-NJS_MODULE_P="njs-${NJS_MODULE_PV}"
-NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
-NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
-
-HTTP_XSLTPROC_MODULE_PV="0.16"
-HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
-HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
-HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
-
-# We handle deps below ourselves
-SSL_DEPS_SKIP=1
-AUTOTOOLS_AUTO_DEPEND="no"
-
-inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
-
-DESCRIPTION="Robust, small and high performance http and reverse proxy server"
-HOMEPAGE="https://nginx.org"
-SRC_URI="https://nginx.org/download/${P}.tar.gz
-	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
-	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
-	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
-	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
-	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
-	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
-	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
-	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
-	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
-	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
-	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
-	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
-	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
-	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
-	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
-	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
-	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
-	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
-	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
-	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
-	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
-	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
-	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
-
-LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
-	nginx_modules_http_security? ( Apache-2.0 )
-	nginx_modules_http_push_stream? ( GPL-3 )"
-
-SLOT="mainline"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86 ~amd64-linux ~x86-linux"
-
-# Package doesn't provide a real test suite
-RESTRICT="test"
-
-NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
-	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
-	proxy referer rewrite scgi ssi split_clients upstream_hash
-	upstream_ip_hash upstream_keepalive upstream_least_conn
-	upstream_zone userid uwsgi"
-NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
-	gzip_static image_filter mp4 perl random_index realip secure_link
-	slice stub_status sub xslt"
-NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
-	upstream_hash upstream_least_conn upstream_zone"
-NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
-NGINX_MODULES_MAIL="imap pop3 smtp"
-NGINX_MODULES_3RD="
-	http_auth_ldap
-	http_auth_pam
-	http_brotli
-	http_cache_purge
-	http_dav_ext
-	http_echo
-	http_fancyindex
-	http_geoip2
-	http_headers_more
-	http_javascript
-	http_lua
-	http_memc
-	http_metrics
-	http_mogilefs
-	http_naxsi
-	http_push_stream
-	http_security
-	http_slowfs_cache
-	http_sticky
-	http_upload_progress
-	http_upstream_check
-	http_vhost_traffic_status
-	stream_geoip2
-	stream_javascript
-	http_xsltproc
-"
-
-IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
-	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
-
-for mod in $NGINX_MODULES_STD; do
-	IUSE="${IUSE} +nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_OPT; do
-	IUSE="${IUSE} nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_STD; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_OPT; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_MAIL; do
-	IUSE="${IUSE} nginx_modules_mail_${mod}"
-done
-
-for mod in $NGINX_MODULES_3RD; do
-	IUSE="${IUSE} nginx_modules_${mod}"
-done
-
-# Add so we can warn users updating about config changes
-# @TODO: jbergstroem: remove on next release series
-IUSE="${IUSE} nginx_modules_http_spdy"
-
-CDEPEND="
-	pcre? ( dev-libs/libpcre:= )
-	pcre-jit? ( dev-libs/libpcre:=[jit] )
-	ssl? (
-		!libressl? ( dev-libs/openssl:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http2? (
-		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http-cache? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_brotli? ( app-arch/brotli:= )
-	nginx_modules_http_geoip? ( dev-libs/geoip )
-	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_gunzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip_static? ( sys-libs/zlib )
-	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
-	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
-	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
-	nginx_modules_http_secure_link? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
-	nginx_modules_http_lua? ( dev-lang/luajit:2= )
-	nginx_modules_http_auth_pam? ( sys-libs/pam )
-	nginx_modules_http_metrics? ( dev-libs/yajl:= )
-	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
-	nginx_modules_http_security? (
-		dev-libs/apr:=
-		dev-libs/apr-util:=
-		dev-libs/libxml2:=
-		net-misc/curl
-		www-servers/apache
-	)
-	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
-	nginx_modules_stream_geoip? ( dev-libs/geoip )
-	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
-	xsltproc-memcached? ( dev-libs/libmemcached )"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-nginx )
-	!www-servers/nginx:0"
-DEPEND="${CDEPEND}
-	nginx_modules_http_brotli? ( virtual/pkgconfig )
-	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
-	arm? ( dev-libs/libatomic_ops )
-	libatomic? ( dev-libs/libatomic_ops )"
-PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
-
-REQUIRED_USE="pcre-jit? ( pcre )
-	nginx_modules_http_grpc? ( http2 )
-	nginx_modules_http_lua? (
-		luajit
-		nginx_modules_http_rewrite
-	)
-	nginx_modules_http_naxsi? ( pcre )
-	nginx_modules_http_dav_ext? ( nginx_modules_http_dav )
-	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
-	nginx_modules_http_security? ( pcre )
-	nginx_modules_http_push_stream? ( ssl )
-	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
-
-pkg_setup() {
-	NGINX_HOME="/var/lib/nginx"
-	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
-
-	ebegin "Creating nginx user and group"
-	enewgroup ${PN}
-	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
-	eend $?
-
-	if use libatomic; then
-		ewarn "GCC 4.1+ features built-in atomic operations."
-		ewarn "Using libatomic_ops is only needed if using"
-		ewarn "a different compiler or a GCC prior to 4.1"
-	fi
-
-	if [[ -n $NGINX_ADD_MODULES ]]; then
-		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
-		ewarn "This nginx installation is not supported!"
-		ewarn "Make sure you can reproduce the bug without those modules"
-		ewarn "_before_ reporting bugs."
-	fi
-
-	if use !http; then
-		ewarn "To actually disable all http-functionality you also have to disable"
-		ewarn "all nginx http modules."
-	fi
-
-	if use nginx_modules_http_mogilefs && use threads; then
-		eerror "mogilefs won't compile with threads support."
-		eerror "Please disable either flag and try again."
-		die "Can't compile mogilefs with threads support"
-	fi
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
-	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
-
-	if use nginx_modules_http_auth_pam; then
-		cd "${HTTP_AUTH_PAM_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_brotli; then
-		cd "${HTTP_BROTLI_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_brotli-detect-brotli-r2.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		eautoreconf
-
-		if use luajit ; then
-			sed -i \
-				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
-				configure || die
-		fi
-
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upload_progress; then
-		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
-		cd "${S}" || die
-	fi
-
-	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
-	# We have config protection, don't rename etc files
-	sed -i 's:.default::' auto/install || die
-	# remove useless files
-	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
-
-	# don't install to /etc/nginx/ if not in use
-	local module
-	for module in fastcgi scgi uwsgi ; do
-		if ! use nginx_modules_http_${module}; then
-			sed -i -e "/${module}/d" auto/install || die
-		fi
-	done
-
-	if use xsltproc-memcached; then
-		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
-	fi
-
-	eapply_user
-}
-
-src_configure() {
-	# mod_security needs to generate nginx/modsecurity/config before including it
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		./configure \
-			--enable-standalone-module \
-			--disable-mlogc \
-			--with-ssdeep=no \
-			$(use_enable pcre-jit) \
-			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
-
-		cd "${S}" || die
-	fi
-
-	local myconf=() http_enabled= mail_enabled= stream_enabled=
-
-	use aio       && myconf+=( --with-file-aio )
-	use debug     && myconf+=( --with-debug )
-	use http2     && myconf+=( --with-http_v2_module )
-	use libatomic && myconf+=( --with-libatomic )
-	use pcre      && myconf+=( --with-pcre )
-	use pcre-jit  && myconf+=( --with-pcre-jit )
-	use threads   && myconf+=( --with-threads )
-
-	# HTTP modules
-	for mod in $NGINX_MODULES_STD; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-		else
-			myconf+=( --without-http_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_OPT; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-			myconf+=( --with-http_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_http_fastcgi; then
-		myconf+=( --with-http_realip_module )
-	fi
-
-	# third-party modules
-	if use nginx_modules_http_upload_progress; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_headers_more; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_lua; then
-		http_enabled=1
-		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
-		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
-		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
-		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_metrics; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_naxsi ; then
-		http_enabled=1
-		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
-	fi
-
-	if use rtmp ; then
-		http_enabled=1
-		myconf+=( --add-module=${RTMP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_dav_ext ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_echo ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_security ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
-	fi
-
-	if use nginx_modules_http_push_stream ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_sticky ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_mogilefs ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_memc ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_vhost_traffic_status; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
-		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
-		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
-	fi
-
-	if use nginx_modules_http_brotli; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_xsltproc; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
-	fi
-
-	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
-		http_enabled=1
-	fi
-
-	if [ $http_enabled ]; then
-		use http-cache || myconf+=( --without-http-cache )
-		use ssl && myconf+=( --with-http_ssl_module )
-	else
-		myconf+=( --without-http --without-http-cache )
-	fi
-
-	# Stream modules
-	for mod in $NGINX_MODULES_STREAM_STD; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-		else
-			myconf+=( --without-stream_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_STREAM_OPT; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-			myconf+=( --with-stream_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
-		stream_enabled=1
-	fi
-
-	if [ $stream_enabled ]; then
-		myconf+=( --with-stream )
-		use ssl && myconf+=( --with-stream_ssl_module )
-	fi
-
-	# MAIL modules
-	for mod in $NGINX_MODULES_MAIL; do
-		if use nginx_modules_mail_${mod}; then
-			mail_enabled=1
-		else
-			myconf+=( --without-mail_${mod}_module )
-		fi
-	done
-
-	if [ $mail_enabled ]; then
-		myconf+=( --with-mail )
-		use ssl && myconf+=( --with-mail_ssl_module )
-	fi
-
-	# custom modules
-	for mod in $NGINX_ADD_MODULES; do
-		myconf+=(  --add-module=${mod} )
-	done
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	tc-export CC
-
-	if ! use prefix; then
-		myconf+=( --user=${PN} )
-		myconf+=( --group=${PN} )
-	fi
-
-	local WITHOUT_IPV6=
-	if ! use ipv6; then
-		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
-	fi
-
-	if [[ -n "${EXTRA_ECONF}" ]]; then
-		myconf+=( ${EXTRA_ECONF} )
-		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
-	fi
-
-	./configure \
-		--prefix="${EPREFIX}"/usr \
-		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
-		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
-		--pid-path="${EPREFIX}"/run/${PN}.pid \
-		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
-		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
-		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
-		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
-		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
-		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
-		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
-		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
-		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
-		--with-compat \
-		"${myconf[@]}" || die "configure failed"
-
-	# A purely cosmetic change that makes nginx -V more readable. This can be
-	# good if people outside the gentoo community would troubleshoot and
-	# question the users setup.
-	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
-}
-
-src_compile() {
-	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
-}
-
-src_install() {
-	emake DESTDIR="${D%/}" install
-
-	cp "${FILESDIR}"/nginx.conf-r2 "${ED}"etc/nginx/nginx.conf || die
-
-	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
-	newconfd "${FILESDIR}"/nginx.confd nginx
-
-	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
-
-	doman man/nginx.8
-	dodoc CHANGES* README
-
-	# just keepdir. do not copy the default htdocs files (bug #449136)
-	keepdir /var/www/localhost
-	rm -rf "${D}"usr/html || die
-
-	# set up a list of directories to keep
-	local keepdir_list="${NGINX_HOME_TMP}"/client
-	local module
-	for module in proxy fastcgi scgi uwsgi; do
-		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
-	done
-
-	keepdir /var/log/nginx ${keepdir_list}
-
-	# this solves a problem with SELinux where nginx doesn't see the directories
-	# as root and tries to create them as nginx
-	fperms 0750 "${NGINX_HOME_TMP}"
-	fowners ${PN}:0 "${NGINX_HOME_TMP}"
-
-	fperms 0700 ${keepdir_list}
-	fowners ${PN}:${PN} ${keepdir_list}
-
-	fperms 0710 /var/log/nginx
-	fowners 0:${PN} /var/log/nginx
-
-	# logrotate
-	insinto /etc/logrotate.d
-	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
-
-	if use luajit; then
-		pax-mark m "${ED%/}/usr/sbin/nginx"
-	fi
-
-	if use nginx_modules_http_perl; then
-		cd "${S}"/objs/src/http/modules/perl/ || die
-		emake DESTDIR="${D}" INSTALLDIRS=vendor
-		perl_delete_localpod
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		docinto ${HTTP_CACHE_PURGE_MODULE_P}
-		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
-		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		docinto ${HTTP_FANCYINDEX_MODULE_P}
-		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_lua; then
-		docinto ${HTTP_LUA_MODULE_P}
-		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		docinto ${HTTP_AUTH_PAM_MODULE_P}
-		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
-		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
-	fi
-
-	if use nginx_modules_http_naxsi; then
-		insinto /etc/nginx
-		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
-	fi
-
-	if use rtmp; then
-		docinto ${RTMP_MODULE_P}
-		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
-	fi
-
-	if use nginx_modules_http_dav_ext; then
-		docinto ${HTTP_DAV_EXT_MODULE_P}
-		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_echo; then
-		docinto ${HTTP_ECHO_MODULE_P}
-		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_security; then
-		docinto ${HTTP_SECURITY_MODULE_P}
-		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
-	fi
-
-	if use nginx_modules_http_push_stream; then
-		docinto ${HTTP_PUSH_STREAM_MODULE_P}
-		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
-	fi
-
-	if use nginx_modules_http_sticky; then
-		docinto ${HTTP_STICKY_MODULE_P}
-		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
-	fi
-
-	if use nginx_modules_http_memc; then
-		docinto ${HTTP_MEMC_MODULE_P}
-		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		docinto ${HTTP_LDAP_MODULE_P}
-		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
-	fi
-}
-
-pkg_postinst() {
-	if use ssl; then
-		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
-			install_cert /etc/ssl/${PN}/${PN}
-			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
-		fi
-	fi
-
-	if use nginx_modules_http_spdy; then
-		ewarn ""
-		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
-		ewarn "Update your configs and package.use accordingly."
-	fi
-
-	if use nginx_modules_http_lua; then
-		ewarn ""
-		ewarn "While you can build lua 3rd party module against ${P}"
-		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
-		ewarn "officially supported target yet. You are on your own."
-		ewarn "Expect runtime failures, memory leaks and other problems!"
-	fi
-
-	if use nginx_modules_http_lua && use http2; then
-		ewarn ""
-		ewarn "Lua 3rd party module author warns against using ${P} with"
-		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
-	fi
-
-	local _n_permission_layout_checks=0
-	local _has_to_adjust_permissions=0
-	local _has_to_show_permission_warning=0
-
-	# Defaults to 1 to inform people doing a fresh installation
-	# that we ship modified {scgi,uwsgi,fastcgi}_params files
-	local _has_to_show_httpoxy_mitigation_notice=1
-
-	local _replacing_version=
-	for _replacing_version in ${REPLACING_VERSIONS}; do
-		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
-
-		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
-			# Should never happen:
-			# Package is abusing slots but doesn't allow multiple parallel installations.
-			# If we run into this situation it is unsafe to automatically adjust any
-			# permission...
-			_has_to_show_permission_warning=1
-
-			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
-				"You will have to adjust permissions on your own."
-
-			break
-		fi
-
-		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
-		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
-
-		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
-		# This was before we introduced multiple nginx versions so we
-		# do not need to distinguish between stable and mainline
-		local _need_to_fix_CVE2013_0337=1
-
-		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
-			# We are updating an installation which should already be fixed
-			_need_to_fix_CVE2013_0337=0
-			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
-		else
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
-		fi
-
-		# Do we need to inform about HTTPoxy mitigation?
-		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_show_httpoxy_mitigation_notice=1
-			debug-print "Need to inform about HTTPoxy mitigation!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.1-r2"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.3-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that the user has
-					# already seen the HTTPoxy mitigation notice because he/she is doing
-					# an update from previous version where we have already shown
-					# the warning. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation where we already informed
-				# that we are mitigating HTTPoxy per default
-				_has_to_show_httpoxy_mitigation_notice=0
-				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
-			else
-				_has_to_show_httpoxy_mitigation_notice=1
-				debug-print "Need to inform about HTTPoxy mitigation!"
-			fi
-		fi
-
-		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
-		# All branches up to 1.11 are affected
-		local _need_to_fix_CVE2016_1247=1
-
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.2-r3"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.6-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that we have already
-					# adjusted permissions or were never affected because user is
-					# doing an update from previous version which was safe or did
-					# the adjustments. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation which should already be adjusted
-				# or which was never affected
-				_need_to_fix_CVE2016_1247=0
-				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
-			else
-				_has_to_adjust_permissions=1
-				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-			fi
-		fi
-	done
-
-	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
-		# We do not DIE when chmod/chown commands are failing because
-		# package is already merged on user's system at this stage
-		# and we cannot retry without losing the information that
-		# the existing installation needs to adjust permissions.
-		# Instead we are going to a show a big warning ...
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The world-readable bit (if set) has been removed from the"
-			ewarn "following directories to mitigate a security bug"
-			ewarn "(CVE-2013-0337, bug #458726):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn "  ${EPREFIX%/}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX%/}${NGINX_HOME_TMP}'"
-			chmod o-rwx \
-				"${EPREFIX%/}"/var/log/nginx \
-				"${EPREFIX%/}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
-				_has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The permissions on the following directory have been reset in"
-			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "Also ensure that no other log directory used by any of your"
-			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-			ewarn "used by nginx can be abused to escalate privileges!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			chown 0:nginx "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-			chmod 710 "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
-			# Should never happen ...
-			ewarn ""
-			ewarn "*************************************************************"
-			ewarn "***************         W A R N I N G         ***************"
-			ewarn "*************************************************************"
-			ewarn "The one-time only attempt to adjust permissions of the"
-			ewarn "existing nginx installation failed. Be aware that we will not"
-			ewarn "try to adjust the same permissions again because now you are"
-			ewarn "using a nginx version where we expect that the permissions"
-			ewarn "are already adjusted or that you know what you are doing and"
-			ewarn "want to keep custom permissions."
-			ewarn ""
-		fi
-	fi
-
-	# Sanity check for CVE-2016-1247
-	# Required to warn users who received the warning above and thought
-	# they could fix it by unmerging and re-merging the package or have
-	# unmerged a affected installation on purpose in the past leaving
-	# /var/log/nginx on their system due to keepdir/non-empty folder
-	# and are now installing the package again.
-	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX%/}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
-	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
-	if [ $? -eq 0 ] ; then
-		# Cleanup -- no reason to die here!
-		rm -f "${_sanity_check_testfile}"
-
-		ewarn ""
-		ewarn "*************************************************************"
-		ewarn "***************         W A R N I N G         ***************"
-		ewarn "*************************************************************"
-		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
-		ewarn "(bug #605008) because nginx user is able to create files in"
-		ewarn ""
-		ewarn "  ${EPREFIX%/}/var/log/nginx"
-		ewarn ""
-		ewarn "Also ensure that no other log directory used by any of your"
-		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-		ewarn "used by nginx can be abused to escalate privileges!"
-	fi
-
-	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
-		# HTTPoxy mitigation
-		ewarn ""
-		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
-		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
-		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
-		ewarn "are sourcing one of the default"
-		ewarn ""
-		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
-		ewarn "  - 'scgi_params'"
-		ewarn "  - 'uwsgi_params'"
-		ewarn ""
-		ewarn "files in your server block(s)."
-		ewarn ""
-		ewarn "If this is causing any problems for you make sure that you are sourcing the"
-		ewarn "default parameters _before_ you set your own values."
-		ewarn "If you are relying on user-supplied proxy values you have to remove the"
-		ewarn "correlating lines from the file(s) mentioned above."
-		ewarn ""
-	fi
-}
diff --git a/www-servers/nginx/nginx-1.17.4-r100.ebuild b/www-servers/nginx/nginx-1.17.4-r100.ebuild
deleted file mode 100644
index a742359..0000000
--- a/www-servers/nginx/nginx-1.17.4-r100.ebuild
+++ /dev/null
@@ -1,1108 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-# Maintainer notes:
-# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
-# - any http-module activates the main http-functionality and overrides USE=-http
-# - keep the following requirements in mind before adding external modules:
-#	* alive upstream
-#	* sane packaging
-#	* builds cleanly
-#	* does not need a patch for nginx core
-# - TODO: test the google-perftools module (included in vanilla tarball)
-
-# prevent perl-module from adding automagic perl DEPENDs
-GENTOO_DEPEND_ON_PERL="no"
-
-# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
-DEVEL_KIT_MODULE_PV="0.3.1"
-DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
-DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-
-# ngx_brotli (https://github.com/eustas/ngx_brotli, BSD-2)
-HTTP_BROTLI_MODULE_PV="8104036af9cff4b1d34f22d00ba857e2a93a243c"
-HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-HTTP_BROTLI_MODULE_URI="https://github.com/eustas/ngx_brotli/archive/${HTTP_BROTLI_MODULE_PV}.tar.gz"
-HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-
-# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
-HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
-HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
-HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
-HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
-
-# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
-HTTP_HEADERS_MORE_MODULE_PV="0.33"
-HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
-HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
-HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
-
-# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
-HTTP_CACHE_PURGE_MODULE_PV="2.3"
-HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
-HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-
-# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
-HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
-HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
-HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-
-# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
-HTTP_FANCYINDEX_MODULE_PV="0.4.3"
-HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
-HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-
-# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
-HTTP_LUA_MODULE_PV="0.10.15"
-HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
-HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
-HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
-
-# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
-HTTP_AUTH_PAM_MODULE_PV="1.5.1"
-HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
-HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
-HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
-
-# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
-HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
-HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
-HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-
-# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
-HTTP_METRICS_MODULE_PV="0.1.1"
-HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
-HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-
-# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-
-# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
-HTTP_NAXSI_MODULE_PV="0.56"
-HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
-HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
-HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
-
-# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
-RTMP_MODULE_PV="1.2.1"
-RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
-RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
-RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
-
-# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
-HTTP_DAV_EXT_MODULE_PV="3.0.0"
-HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
-HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
-HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
-
-# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
-HTTP_ECHO_MODULE_PV="0.61"
-HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
-HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
-HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
-
-# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
-# keep the MODULE_P here consistent with upstream to avoid tarball duplication
-HTTP_SECURITY_MODULE_PV="2.9.3"
-HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
-HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
-HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
-
-# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
-HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
-HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
-HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
-HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
-
-# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
-HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
-HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
-HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
-HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
-
-# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
-HTTP_MOGILEFS_MODULE_PV="1.0.4"
-HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
-HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-
-# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
-HTTP_MEMC_MODULE_PV="0.19"
-HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
-HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
-HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
-
-# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
-HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
-HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
-HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-
-# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
-GEOIP2_MODULE_PV="3.2"
-GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
-GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-
-# njs-module (https://github.com/nginx/njs, as-is)
-NJS_MODULE_PV="0.3.5"
-NJS_MODULE_P="njs-${NJS_MODULE_PV}"
-NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
-NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
-
-HTTP_XSLTPROC_MODULE_PV="0.16"
-HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
-HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
-HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
-
-# We handle deps below ourselves
-SSL_DEPS_SKIP=1
-AUTOTOOLS_AUTO_DEPEND="no"
-
-inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
-
-DESCRIPTION="Robust, small and high performance http and reverse proxy server"
-HOMEPAGE="https://nginx.org"
-SRC_URI="https://nginx.org/download/${P}.tar.gz
-	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
-	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
-	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
-	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
-	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
-	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
-	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
-	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
-	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
-	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
-	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
-	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
-	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
-	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
-	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
-	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
-	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
-	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
-	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
-	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
-	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
-	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
-	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
-
-LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
-	nginx_modules_http_security? ( Apache-2.0 )
-	nginx_modules_http_push_stream? ( GPL-3 )"
-
-SLOT="mainline"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86 ~amd64-linux ~x86-linux"
-
-# Package doesn't provide a real test suite
-RESTRICT="test"
-
-NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
-	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
-	proxy referer rewrite scgi ssi split_clients upstream_hash
-	upstream_ip_hash upstream_keepalive upstream_least_conn
-	upstream_zone userid uwsgi"
-NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
-	gzip_static image_filter mp4 perl random_index realip secure_link
-	slice stub_status sub xslt"
-NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
-	upstream_hash upstream_least_conn upstream_zone"
-NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
-NGINX_MODULES_MAIL="imap pop3 smtp"
-NGINX_MODULES_3RD="
-	http_auth_ldap
-	http_auth_pam
-	http_brotli
-	http_cache_purge
-	http_dav_ext
-	http_echo
-	http_fancyindex
-	http_geoip2
-	http_headers_more
-	http_javascript
-	http_lua
-	http_memc
-	http_metrics
-	http_mogilefs
-	http_naxsi
-	http_push_stream
-	http_security
-	http_slowfs_cache
-	http_sticky
-	http_upload_progress
-	http_upstream_check
-	http_vhost_traffic_status
-	stream_geoip2
-	stream_javascript
-	http_xsltproc
-"
-
-IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
-	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
-
-for mod in $NGINX_MODULES_STD; do
-	IUSE="${IUSE} +nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_OPT; do
-	IUSE="${IUSE} nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_STD; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_OPT; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_MAIL; do
-	IUSE="${IUSE} nginx_modules_mail_${mod}"
-done
-
-for mod in $NGINX_MODULES_3RD; do
-	IUSE="${IUSE} nginx_modules_${mod}"
-done
-
-# Add so we can warn users updating about config changes
-# @TODO: jbergstroem: remove on next release series
-IUSE="${IUSE} nginx_modules_http_spdy"
-
-CDEPEND="
-	pcre? ( dev-libs/libpcre:= )
-	pcre-jit? ( dev-libs/libpcre:=[jit] )
-	ssl? (
-		!libressl? ( dev-libs/openssl:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http2? (
-		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http-cache? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_brotli? ( app-arch/brotli:= )
-	nginx_modules_http_geoip? ( dev-libs/geoip )
-	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_gunzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip_static? ( sys-libs/zlib )
-	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
-	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
-	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
-	nginx_modules_http_secure_link? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
-	nginx_modules_http_lua? ( dev-lang/luajit:2= )
-	nginx_modules_http_auth_pam? ( sys-libs/pam )
-	nginx_modules_http_metrics? ( dev-libs/yajl:= )
-	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
-	nginx_modules_http_security? (
-		dev-libs/apr:=
-		dev-libs/apr-util:=
-		dev-libs/libxml2:=
-		net-misc/curl
-		www-servers/apache
-	)
-	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
-	nginx_modules_stream_geoip? ( dev-libs/geoip )
-	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
-	xsltproc-memcached? ( dev-libs/libmemcached )"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-nginx )
-	!www-servers/nginx:0"
-DEPEND="${CDEPEND}
-	nginx_modules_http_brotli? ( virtual/pkgconfig )
-	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
-	arm? ( dev-libs/libatomic_ops )
-	libatomic? ( dev-libs/libatomic_ops )"
-PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
-
-REQUIRED_USE="pcre-jit? ( pcre )
-	nginx_modules_http_grpc? ( http2 )
-	nginx_modules_http_lua? (
-		luajit
-		nginx_modules_http_rewrite
-	)
-	nginx_modules_http_naxsi? ( pcre )
-	nginx_modules_http_dav_ext? ( nginx_modules_http_dav )
-	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
-	nginx_modules_http_security? ( pcre )
-	nginx_modules_http_push_stream? ( ssl )
-	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
-
-pkg_setup() {
-	NGINX_HOME="/var/lib/nginx"
-	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
-
-	ebegin "Creating nginx user and group"
-	enewgroup ${PN}
-	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
-	eend $?
-
-	if use libatomic; then
-		ewarn "GCC 4.1+ features built-in atomic operations."
-		ewarn "Using libatomic_ops is only needed if using"
-		ewarn "a different compiler or a GCC prior to 4.1"
-	fi
-
-	if [[ -n $NGINX_ADD_MODULES ]]; then
-		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
-		ewarn "This nginx installation is not supported!"
-		ewarn "Make sure you can reproduce the bug without those modules"
-		ewarn "_before_ reporting bugs."
-	fi
-
-	if use !http; then
-		ewarn "To actually disable all http-functionality you also have to disable"
-		ewarn "all nginx http modules."
-	fi
-
-	if use nginx_modules_http_mogilefs && use threads; then
-		eerror "mogilefs won't compile with threads support."
-		eerror "Please disable either flag and try again."
-		die "Can't compile mogilefs with threads support"
-	fi
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
-	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
-
-	if use nginx_modules_http_auth_pam; then
-		cd "${HTTP_AUTH_PAM_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_brotli; then
-		cd "${HTTP_BROTLI_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_brotli-detect-brotli-r2.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		eautoreconf
-
-		if use luajit ; then
-			sed -i \
-				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
-				configure || die
-		fi
-
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upload_progress; then
-		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
-		cd "${S}" || die
-	fi
-
-	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
-	# We have config protection, don't rename etc files
-	sed -i 's:.default::' auto/install || die
-	# remove useless files
-	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
-
-	# don't install to /etc/nginx/ if not in use
-	local module
-	for module in fastcgi scgi uwsgi ; do
-		if ! use nginx_modules_http_${module}; then
-			sed -i -e "/${module}/d" auto/install || die
-		fi
-	done
-
-	if use xsltproc-memcached; then
-		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
-	fi
-
-	eapply_user
-}
-
-src_configure() {
-	# mod_security needs to generate nginx/modsecurity/config before including it
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		./configure \
-			--enable-standalone-module \
-			--disable-mlogc \
-			--with-ssdeep=no \
-			$(use_enable pcre-jit) \
-			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
-
-		cd "${S}" || die
-	fi
-
-	local myconf=() http_enabled= mail_enabled= stream_enabled=
-
-	use aio       && myconf+=( --with-file-aio )
-	use debug     && myconf+=( --with-debug )
-	use http2     && myconf+=( --with-http_v2_module )
-	use libatomic && myconf+=( --with-libatomic )
-	use pcre      && myconf+=( --with-pcre )
-	use pcre-jit  && myconf+=( --with-pcre-jit )
-	use threads   && myconf+=( --with-threads )
-
-	# HTTP modules
-	for mod in $NGINX_MODULES_STD; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-		else
-			myconf+=( --without-http_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_OPT; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-			myconf+=( --with-http_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_http_fastcgi; then
-		myconf+=( --with-http_realip_module )
-	fi
-
-	# third-party modules
-	if use nginx_modules_http_upload_progress; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_headers_more; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_lua; then
-		http_enabled=1
-		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
-		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
-		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
-		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_metrics; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_naxsi ; then
-		http_enabled=1
-		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
-	fi
-
-	if use rtmp ; then
-		http_enabled=1
-		myconf+=( --add-module=${RTMP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_dav_ext ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_echo ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_security ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
-	fi
-
-	if use nginx_modules_http_push_stream ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_sticky ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_mogilefs ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_memc ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_vhost_traffic_status; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
-		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
-		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
-	fi
-
-	if use nginx_modules_http_brotli; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_xsltproc; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
-	fi
-
-	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
-		http_enabled=1
-	fi
-
-	if [ $http_enabled ]; then
-		use http-cache || myconf+=( --without-http-cache )
-		use ssl && myconf+=( --with-http_ssl_module )
-	else
-		myconf+=( --without-http --without-http-cache )
-	fi
-
-	# Stream modules
-	for mod in $NGINX_MODULES_STREAM_STD; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-		else
-			myconf+=( --without-stream_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_STREAM_OPT; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-			myconf+=( --with-stream_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
-		stream_enabled=1
-	fi
-
-	if [ $stream_enabled ]; then
-		myconf+=( --with-stream )
-		use ssl && myconf+=( --with-stream_ssl_module )
-	fi
-
-	# MAIL modules
-	for mod in $NGINX_MODULES_MAIL; do
-		if use nginx_modules_mail_${mod}; then
-			mail_enabled=1
-		else
-			myconf+=( --without-mail_${mod}_module )
-		fi
-	done
-
-	if [ $mail_enabled ]; then
-		myconf+=( --with-mail )
-		use ssl && myconf+=( --with-mail_ssl_module )
-	fi
-
-	# custom modules
-	for mod in $NGINX_ADD_MODULES; do
-		myconf+=(  --add-module=${mod} )
-	done
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	tc-export CC
-
-	if ! use prefix; then
-		myconf+=( --user=${PN} )
-		myconf+=( --group=${PN} )
-	fi
-
-	local WITHOUT_IPV6=
-	if ! use ipv6; then
-		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
-	fi
-
-	if [[ -n "${EXTRA_ECONF}" ]]; then
-		myconf+=( ${EXTRA_ECONF} )
-		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
-	fi
-
-	./configure \
-		--prefix="${EPREFIX}"/usr \
-		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
-		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
-		--pid-path="${EPREFIX}"/run/${PN}.pid \
-		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
-		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
-		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
-		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
-		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
-		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
-		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
-		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
-		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
-		--with-compat \
-		"${myconf[@]}" || die "configure failed"
-
-	# A purely cosmetic change that makes nginx -V more readable. This can be
-	# good if people outside the gentoo community would troubleshoot and
-	# question the users setup.
-	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
-}
-
-src_compile() {
-	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
-}
-
-src_install() {
-	emake DESTDIR="${D%/}" install
-
-	cp "${FILESDIR}"/nginx.conf-r2 "${ED}"etc/nginx/nginx.conf || die
-
-	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
-	newconfd "${FILESDIR}"/nginx.confd nginx
-
-	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
-
-	doman man/nginx.8
-	dodoc CHANGES* README
-
-	# just keepdir. do not copy the default htdocs files (bug #449136)
-	keepdir /var/www/localhost
-	rm -rf "${D}"usr/html || die
-
-	# set up a list of directories to keep
-	local keepdir_list="${NGINX_HOME_TMP}"/client
-	local module
-	for module in proxy fastcgi scgi uwsgi; do
-		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
-	done
-
-	keepdir /var/log/nginx ${keepdir_list}
-
-	# this solves a problem with SELinux where nginx doesn't see the directories
-	# as root and tries to create them as nginx
-	fperms 0750 "${NGINX_HOME_TMP}"
-	fowners ${PN}:0 "${NGINX_HOME_TMP}"
-
-	fperms 0700 ${keepdir_list}
-	fowners ${PN}:${PN} ${keepdir_list}
-
-	fperms 0710 /var/log/nginx
-	fowners 0:${PN} /var/log/nginx
-
-	# logrotate
-	insinto /etc/logrotate.d
-	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
-
-	if use luajit; then
-		pax-mark m "${ED%/}/usr/sbin/nginx"
-	fi
-
-	if use nginx_modules_http_perl; then
-		cd "${S}"/objs/src/http/modules/perl/ || die
-		emake DESTDIR="${D}" INSTALLDIRS=vendor
-		perl_delete_localpod
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		docinto ${HTTP_CACHE_PURGE_MODULE_P}
-		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
-		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		docinto ${HTTP_FANCYINDEX_MODULE_P}
-		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_lua; then
-		docinto ${HTTP_LUA_MODULE_P}
-		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		docinto ${HTTP_AUTH_PAM_MODULE_P}
-		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
-		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
-	fi
-
-	if use nginx_modules_http_naxsi; then
-		insinto /etc/nginx
-		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
-	fi
-
-	if use rtmp; then
-		docinto ${RTMP_MODULE_P}
-		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
-	fi
-
-	if use nginx_modules_http_dav_ext; then
-		docinto ${HTTP_DAV_EXT_MODULE_P}
-		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_echo; then
-		docinto ${HTTP_ECHO_MODULE_P}
-		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_security; then
-		docinto ${HTTP_SECURITY_MODULE_P}
-		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
-	fi
-
-	if use nginx_modules_http_push_stream; then
-		docinto ${HTTP_PUSH_STREAM_MODULE_P}
-		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
-	fi
-
-	if use nginx_modules_http_sticky; then
-		docinto ${HTTP_STICKY_MODULE_P}
-		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
-	fi
-
-	if use nginx_modules_http_memc; then
-		docinto ${HTTP_MEMC_MODULE_P}
-		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		docinto ${HTTP_LDAP_MODULE_P}
-		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
-	fi
-}
-
-pkg_postinst() {
-	if use ssl; then
-		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
-			install_cert /etc/ssl/${PN}/${PN}
-			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
-		fi
-	fi
-
-	if use nginx_modules_http_spdy; then
-		ewarn ""
-		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
-		ewarn "Update your configs and package.use accordingly."
-	fi
-
-	if use nginx_modules_http_lua; then
-		ewarn ""
-		ewarn "While you can build lua 3rd party module against ${P}"
-		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
-		ewarn "officially supported target yet. You are on your own."
-		ewarn "Expect runtime failures, memory leaks and other problems!"
-	fi
-
-	if use nginx_modules_http_lua && use http2; then
-		ewarn ""
-		ewarn "Lua 3rd party module author warns against using ${P} with"
-		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
-	fi
-
-	local _n_permission_layout_checks=0
-	local _has_to_adjust_permissions=0
-	local _has_to_show_permission_warning=0
-
-	# Defaults to 1 to inform people doing a fresh installation
-	# that we ship modified {scgi,uwsgi,fastcgi}_params files
-	local _has_to_show_httpoxy_mitigation_notice=1
-
-	local _replacing_version=
-	for _replacing_version in ${REPLACING_VERSIONS}; do
-		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
-
-		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
-			# Should never happen:
-			# Package is abusing slots but doesn't allow multiple parallel installations.
-			# If we run into this situation it is unsafe to automatically adjust any
-			# permission...
-			_has_to_show_permission_warning=1
-
-			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
-				"You will have to adjust permissions on your own."
-
-			break
-		fi
-
-		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
-		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
-
-		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
-		# This was before we introduced multiple nginx versions so we
-		# do not need to distinguish between stable and mainline
-		local _need_to_fix_CVE2013_0337=1
-
-		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
-			# We are updating an installation which should already be fixed
-			_need_to_fix_CVE2013_0337=0
-			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
-		else
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
-		fi
-
-		# Do we need to inform about HTTPoxy mitigation?
-		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_show_httpoxy_mitigation_notice=1
-			debug-print "Need to inform about HTTPoxy mitigation!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.1-r2"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.3-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that the user has
-					# already seen the HTTPoxy mitigation notice because he/she is doing
-					# an update from previous version where we have already shown
-					# the warning. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation where we already informed
-				# that we are mitigating HTTPoxy per default
-				_has_to_show_httpoxy_mitigation_notice=0
-				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
-			else
-				_has_to_show_httpoxy_mitigation_notice=1
-				debug-print "Need to inform about HTTPoxy mitigation!"
-			fi
-		fi
-
-		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
-		# All branches up to 1.11 are affected
-		local _need_to_fix_CVE2016_1247=1
-
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.2-r3"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.6-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that we have already
-					# adjusted permissions or were never affected because user is
-					# doing an update from previous version which was safe or did
-					# the adjustments. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation which should already be adjusted
-				# or which was never affected
-				_need_to_fix_CVE2016_1247=0
-				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
-			else
-				_has_to_adjust_permissions=1
-				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-			fi
-		fi
-	done
-
-	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
-		# We do not DIE when chmod/chown commands are failing because
-		# package is already merged on user's system at this stage
-		# and we cannot retry without losing the information that
-		# the existing installation needs to adjust permissions.
-		# Instead we are going to a show a big warning ...
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The world-readable bit (if set) has been removed from the"
-			ewarn "following directories to mitigate a security bug"
-			ewarn "(CVE-2013-0337, bug #458726):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn "  ${EPREFIX%/}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX%/}${NGINX_HOME_TMP}'"
-			chmod o-rwx \
-				"${EPREFIX%/}"/var/log/nginx \
-				"${EPREFIX%/}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
-				_has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The permissions on the following directory have been reset in"
-			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "Also ensure that no other log directory used by any of your"
-			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-			ewarn "used by nginx can be abused to escalate privileges!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			chown 0:nginx "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-			chmod 710 "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
-			# Should never happen ...
-			ewarn ""
-			ewarn "*************************************************************"
-			ewarn "***************         W A R N I N G         ***************"
-			ewarn "*************************************************************"
-			ewarn "The one-time only attempt to adjust permissions of the"
-			ewarn "existing nginx installation failed. Be aware that we will not"
-			ewarn "try to adjust the same permissions again because now you are"
-			ewarn "using a nginx version where we expect that the permissions"
-			ewarn "are already adjusted or that you know what you are doing and"
-			ewarn "want to keep custom permissions."
-			ewarn ""
-		fi
-	fi
-
-	# Sanity check for CVE-2016-1247
-	# Required to warn users who received the warning above and thought
-	# they could fix it by unmerging and re-merging the package or have
-	# unmerged a affected installation on purpose in the past leaving
-	# /var/log/nginx on their system due to keepdir/non-empty folder
-	# and are now installing the package again.
-	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX%/}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
-	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
-	if [ $? -eq 0 ] ; then
-		# Cleanup -- no reason to die here!
-		rm -f "${_sanity_check_testfile}"
-
-		ewarn ""
-		ewarn "*************************************************************"
-		ewarn "***************         W A R N I N G         ***************"
-		ewarn "*************************************************************"
-		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
-		ewarn "(bug #605008) because nginx user is able to create files in"
-		ewarn ""
-		ewarn "  ${EPREFIX%/}/var/log/nginx"
-		ewarn ""
-		ewarn "Also ensure that no other log directory used by any of your"
-		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-		ewarn "used by nginx can be abused to escalate privileges!"
-	fi
-
-	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
-		# HTTPoxy mitigation
-		ewarn ""
-		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
-		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
-		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
-		ewarn "are sourcing one of the default"
-		ewarn ""
-		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
-		ewarn "  - 'scgi_params'"
-		ewarn "  - 'uwsgi_params'"
-		ewarn ""
-		ewarn "files in your server block(s)."
-		ewarn ""
-		ewarn "If this is causing any problems for you make sure that you are sourcing the"
-		ewarn "default parameters _before_ you set your own values."
-		ewarn "If you are relying on user-supplied proxy values you have to remove the"
-		ewarn "correlating lines from the file(s) mentioned above."
-		ewarn ""
-	fi
-}
diff --git a/www-servers/nginx/nginx-1.17.5-r100.ebuild b/www-servers/nginx/nginx-1.17.5-r100.ebuild
deleted file mode 100644
index 8e7032e..0000000
--- a/www-servers/nginx/nginx-1.17.5-r100.ebuild
+++ /dev/null
@@ -1,1108 +0,0 @@
-# Copyright 1999-2019 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI="6"
-
-# Maintainer notes:
-# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
-# - any http-module activates the main http-functionality and overrides USE=-http
-# - keep the following requirements in mind before adding external modules:
-#	* alive upstream
-#	* sane packaging
-#	* builds cleanly
-#	* does not need a patch for nginx core
-# - TODO: test the google-perftools module (included in vanilla tarball)
-
-# prevent perl-module from adding automagic perl DEPENDs
-GENTOO_DEPEND_ON_PERL="no"
-
-# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
-DEVEL_KIT_MODULE_PV="0.3.1"
-DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
-DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
-
-# ngx_brotli (https://github.com/eustas/ngx_brotli, BSD-2)
-HTTP_BROTLI_MODULE_PV="8104036af9cff4b1d34f22d00ba857e2a93a243c"
-HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-HTTP_BROTLI_MODULE_URI="https://github.com/eustas/ngx_brotli/archive/${HTTP_BROTLI_MODULE_PV}.tar.gz"
-HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
-
-# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
-HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
-HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
-HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
-HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
-
-# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
-HTTP_HEADERS_MORE_MODULE_PV="0.33"
-HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
-HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
-HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
-
-# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
-HTTP_CACHE_PURGE_MODULE_PV="2.3"
-HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
-HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
-
-# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
-HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
-HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
-HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
-
-# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
-HTTP_FANCYINDEX_MODULE_PV="0.4.3"
-HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
-HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
-
-# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
-HTTP_LUA_MODULE_PV="0.10.15"
-HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
-HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
-HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
-
-# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
-HTTP_AUTH_PAM_MODULE_PV="1.5.1"
-HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
-HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
-HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
-
-# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
-HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
-HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
-HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
-
-# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
-HTTP_METRICS_MODULE_PV="0.1.1"
-HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
-HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
-
-# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
-HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
-
-# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
-HTTP_NAXSI_MODULE_PV="0.56"
-HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
-HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
-HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
-
-# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
-RTMP_MODULE_PV="1.2.1"
-RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
-RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
-RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
-
-# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
-HTTP_DAV_EXT_MODULE_PV="3.0.0"
-HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
-HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
-HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
-
-# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
-HTTP_ECHO_MODULE_PV="0.61"
-HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
-HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
-HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
-
-# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
-# keep the MODULE_P here consistent with upstream to avoid tarball duplication
-HTTP_SECURITY_MODULE_PV="2.9.3"
-HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
-HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
-HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
-
-# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
-HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
-HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
-HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
-HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
-
-# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
-HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
-HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
-HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
-HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
-
-# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
-HTTP_MOGILEFS_MODULE_PV="1.0.4"
-HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
-HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
-
-# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
-HTTP_MEMC_MODULE_PV="0.19"
-HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
-HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
-HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
-
-# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
-HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
-HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
-HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
-
-# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
-GEOIP2_MODULE_PV="3.2"
-GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
-GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
-
-# njs-module (https://github.com/nginx/njs, as-is)
-NJS_MODULE_PV="0.3.6"
-NJS_MODULE_P="njs-${NJS_MODULE_PV}"
-NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
-NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
-
-HTTP_XSLTPROC_MODULE_PV="0.16"
-HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
-HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
-HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
-
-# We handle deps below ourselves
-SSL_DEPS_SKIP=1
-AUTOTOOLS_AUTO_DEPEND="no"
-
-inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
-
-DESCRIPTION="Robust, small and high performance http and reverse proxy server"
-HOMEPAGE="https://nginx.org"
-SRC_URI="https://nginx.org/download/${P}.tar.gz
-	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
-	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
-	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
-	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
-	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
-	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
-	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
-	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
-	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
-	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
-	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
-	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
-	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
-	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
-	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
-	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
-	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
-	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
-	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
-	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
-	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
-	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
-	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
-	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
-	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
-
-LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
-	nginx_modules_http_security? ( Apache-2.0 )
-	nginx_modules_http_push_stream? ( GPL-3 )"
-
-SLOT="mainline"
-KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86 ~amd64-linux ~x86-linux"
-
-# Package doesn't provide a real test suite
-RESTRICT="test"
-
-NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
-	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
-	proxy referer rewrite scgi ssi split_clients upstream_hash
-	upstream_ip_hash upstream_keepalive upstream_least_conn
-	upstream_zone userid uwsgi"
-NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
-	gzip_static image_filter mp4 perl random_index realip secure_link
-	slice stub_status sub xslt"
-NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
-	upstream_hash upstream_least_conn upstream_zone"
-NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
-NGINX_MODULES_MAIL="imap pop3 smtp"
-NGINX_MODULES_3RD="
-	http_auth_ldap
-	http_auth_pam
-	http_brotli
-	http_cache_purge
-	http_dav_ext
-	http_echo
-	http_fancyindex
-	http_geoip2
-	http_headers_more
-	http_javascript
-	http_lua
-	http_memc
-	http_metrics
-	http_mogilefs
-	http_naxsi
-	http_push_stream
-	http_security
-	http_slowfs_cache
-	http_sticky
-	http_upload_progress
-	http_upstream_check
-	http_vhost_traffic_status
-	stream_geoip2
-	stream_javascript
-	http_xsltproc
-"
-
-IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
-	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
-
-for mod in $NGINX_MODULES_STD; do
-	IUSE="${IUSE} +nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_OPT; do
-	IUSE="${IUSE} nginx_modules_http_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_STD; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_STREAM_OPT; do
-	IUSE="${IUSE} nginx_modules_stream_${mod}"
-done
-
-for mod in $NGINX_MODULES_MAIL; do
-	IUSE="${IUSE} nginx_modules_mail_${mod}"
-done
-
-for mod in $NGINX_MODULES_3RD; do
-	IUSE="${IUSE} nginx_modules_${mod}"
-done
-
-# Add so we can warn users updating about config changes
-# @TODO: jbergstroem: remove on next release series
-IUSE="${IUSE} nginx_modules_http_spdy"
-
-CDEPEND="
-	pcre? ( dev-libs/libpcre:= )
-	pcre-jit? ( dev-libs/libpcre:=[jit] )
-	ssl? (
-		!libressl? ( dev-libs/openssl:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http2? (
-		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
-		libressl? ( dev-libs/libressl:= )
-	)
-	http-cache? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_brotli? ( app-arch/brotli:= )
-	nginx_modules_http_geoip? ( dev-libs/geoip )
-	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_gunzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip? ( sys-libs/zlib )
-	nginx_modules_http_gzip_static? ( sys-libs/zlib )
-	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
-	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
-	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
-	nginx_modules_http_secure_link? (
-		userland_GNU? (
-			!libressl? ( dev-libs/openssl:0= )
-			libressl? ( dev-libs/libressl:= )
-		)
-	)
-	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
-	nginx_modules_http_lua? ( dev-lang/luajit:2= )
-	nginx_modules_http_auth_pam? ( sys-libs/pam )
-	nginx_modules_http_metrics? ( dev-libs/yajl:= )
-	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
-	nginx_modules_http_security? (
-		dev-libs/apr:=
-		dev-libs/apr-util:=
-		dev-libs/libxml2:=
-		net-misc/curl
-		www-servers/apache
-	)
-	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
-	nginx_modules_stream_geoip? ( dev-libs/geoip )
-	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
-	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
-	xsltproc-memcached? ( dev-libs/libmemcached )"
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-nginx )
-	!www-servers/nginx:0"
-DEPEND="${CDEPEND}
-	nginx_modules_http_brotli? ( virtual/pkgconfig )
-	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
-	arm? ( dev-libs/libatomic_ops )
-	libatomic? ( dev-libs/libatomic_ops )"
-PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
-
-REQUIRED_USE="pcre-jit? ( pcre )
-	nginx_modules_http_grpc? ( http2 )
-	nginx_modules_http_lua? (
-		luajit
-		nginx_modules_http_rewrite
-	)
-	nginx_modules_http_naxsi? ( pcre )
-	nginx_modules_http_dav_ext? ( nginx_modules_http_dav )
-	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
-	nginx_modules_http_security? ( pcre )
-	nginx_modules_http_push_stream? ( ssl )
-	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
-
-pkg_setup() {
-	NGINX_HOME="/var/lib/nginx"
-	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
-
-	ebegin "Creating nginx user and group"
-	enewgroup ${PN}
-	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
-	eend $?
-
-	if use libatomic; then
-		ewarn "GCC 4.1+ features built-in atomic operations."
-		ewarn "Using libatomic_ops is only needed if using"
-		ewarn "a different compiler or a GCC prior to 4.1"
-	fi
-
-	if [[ -n $NGINX_ADD_MODULES ]]; then
-		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
-		ewarn "This nginx installation is not supported!"
-		ewarn "Make sure you can reproduce the bug without those modules"
-		ewarn "_before_ reporting bugs."
-	fi
-
-	if use !http; then
-		ewarn "To actually disable all http-functionality you also have to disable"
-		ewarn "all nginx http modules."
-	fi
-
-	if use nginx_modules_http_mogilefs && use threads; then
-		eerror "mogilefs won't compile with threads support."
-		eerror "Please disable either flag and try again."
-		die "Can't compile mogilefs with threads support"
-	fi
-}
-
-src_prepare() {
-	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
-	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
-
-	if use nginx_modules_http_auth_pam; then
-		cd "${HTTP_AUTH_PAM_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_auth_pam-1.5.1-adjust-loglevel-for-authentication-failures.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_brotli; then
-		cd "${HTTP_BROTLI_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_brotli-detect-brotli-r2.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		eautoreconf
-
-		if use luajit ; then
-			sed -i \
-				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
-				configure || die
-		fi
-
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_upload_progress; then
-		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
-		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
-		cd "${S}" || die
-	fi
-
-	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
-	# We have config protection, don't rename etc files
-	sed -i 's:.default::' auto/install || die
-	# remove useless files
-	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
-
-	# don't install to /etc/nginx/ if not in use
-	local module
-	for module in fastcgi scgi uwsgi ; do
-		if ! use nginx_modules_http_${module}; then
-			sed -i -e "/${module}/d" auto/install || die
-		fi
-	done
-
-	if use xsltproc-memcached; then
-		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
-	fi
-
-	eapply_user
-}
-
-src_configure() {
-	# mod_security needs to generate nginx/modsecurity/config before including it
-	if use nginx_modules_http_security; then
-		cd "${HTTP_SECURITY_MODULE_WD}" || die
-
-		./configure \
-			--enable-standalone-module \
-			--disable-mlogc \
-			--with-ssdeep=no \
-			$(use_enable pcre-jit) \
-			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
-
-		cd "${S}" || die
-	fi
-
-	local myconf=() http_enabled= mail_enabled= stream_enabled=
-
-	use aio       && myconf+=( --with-file-aio )
-	use debug     && myconf+=( --with-debug )
-	use http2     && myconf+=( --with-http_v2_module )
-	use libatomic && myconf+=( --with-libatomic )
-	use pcre      && myconf+=( --with-pcre )
-	use pcre-jit  && myconf+=( --with-pcre-jit )
-	use threads   && myconf+=( --with-threads )
-
-	# HTTP modules
-	for mod in $NGINX_MODULES_STD; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-		else
-			myconf+=( --without-http_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_OPT; do
-		if use nginx_modules_http_${mod}; then
-			http_enabled=1
-			myconf+=( --with-http_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_http_fastcgi; then
-		myconf+=( --with-http_realip_module )
-	fi
-
-	# third-party modules
-	if use nginx_modules_http_upload_progress; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_headers_more; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_lua; then
-		http_enabled=1
-		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
-		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
-		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
-		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_metrics; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_naxsi ; then
-		http_enabled=1
-		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
-	fi
-
-	if use rtmp ; then
-		http_enabled=1
-		myconf+=( --add-module=${RTMP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_dav_ext ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_echo ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_security ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
-	fi
-
-	if use nginx_modules_http_push_stream ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_sticky ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_mogilefs ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_memc ; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_vhost_traffic_status; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
-		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
-		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
-	fi
-
-	if use nginx_modules_http_brotli; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
-	fi
-
-	if use nginx_modules_http_xsltproc; then
-		http_enabled=1
-		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
-	fi
-
-	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
-		http_enabled=1
-	fi
-
-	if [ $http_enabled ]; then
-		use http-cache || myconf+=( --without-http-cache )
-		use ssl && myconf+=( --with-http_ssl_module )
-	else
-		myconf+=( --without-http --without-http-cache )
-	fi
-
-	# Stream modules
-	for mod in $NGINX_MODULES_STREAM_STD; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-		else
-			myconf+=( --without-stream_${mod}_module )
-		fi
-	done
-
-	for mod in $NGINX_MODULES_STREAM_OPT; do
-		if use nginx_modules_stream_${mod}; then
-			stream_enabled=1
-			myconf+=( --with-stream_${mod}_module )
-		fi
-	done
-
-	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
-		stream_enabled=1
-	fi
-
-	if [ $stream_enabled ]; then
-		myconf+=( --with-stream )
-		use ssl && myconf+=( --with-stream_ssl_module )
-	fi
-
-	# MAIL modules
-	for mod in $NGINX_MODULES_MAIL; do
-		if use nginx_modules_mail_${mod}; then
-			mail_enabled=1
-		else
-			myconf+=( --without-mail_${mod}_module )
-		fi
-	done
-
-	if [ $mail_enabled ]; then
-		myconf+=( --with-mail )
-		use ssl && myconf+=( --with-mail_ssl_module )
-	fi
-
-	# custom modules
-	for mod in $NGINX_ADD_MODULES; do
-		myconf+=(  --add-module=${mod} )
-	done
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	tc-export CC
-
-	if ! use prefix; then
-		myconf+=( --user=${PN} )
-		myconf+=( --group=${PN} )
-	fi
-
-	local WITHOUT_IPV6=
-	if ! use ipv6; then
-		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
-	fi
-
-	if [[ -n "${EXTRA_ECONF}" ]]; then
-		myconf+=( ${EXTRA_ECONF} )
-		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
-	fi
-
-	./configure \
-		--prefix="${EPREFIX}"/usr \
-		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
-		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
-		--pid-path="${EPREFIX}"/run/${PN}.pid \
-		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
-		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
-		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
-		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
-		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
-		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
-		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
-		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
-		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
-		--with-compat \
-		"${myconf[@]}" || die "configure failed"
-
-	# A purely cosmetic change that makes nginx -V more readable. This can be
-	# good if people outside the gentoo community would troubleshoot and
-	# question the users setup.
-	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
-}
-
-src_compile() {
-	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
-
-	# https://bugs.gentoo.org/286772
-	export LANG=C LC_ALL=C
-	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
-}
-
-src_install() {
-	emake DESTDIR="${D%/}" install
-
-	cp "${FILESDIR}"/nginx.conf-r2 "${ED}"etc/nginx/nginx.conf || die
-
-	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
-	newconfd "${FILESDIR}"/nginx.confd nginx
-
-	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
-
-	doman man/nginx.8
-	dodoc CHANGES* README
-
-	# just keepdir. do not copy the default htdocs files (bug #449136)
-	keepdir /var/www/localhost
-	rm -rf "${D}"usr/html || die
-
-	# set up a list of directories to keep
-	local keepdir_list="${NGINX_HOME_TMP}"/client
-	local module
-	for module in proxy fastcgi scgi uwsgi; do
-		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
-	done
-
-	keepdir /var/log/nginx ${keepdir_list}
-
-	# this solves a problem with SELinux where nginx doesn't see the directories
-	# as root and tries to create them as nginx
-	fperms 0750 "${NGINX_HOME_TMP}"
-	fowners ${PN}:0 "${NGINX_HOME_TMP}"
-
-	fperms 0700 ${keepdir_list}
-	fowners ${PN}:${PN} ${keepdir_list}
-
-	fperms 0710 /var/log/nginx
-	fowners 0:${PN} /var/log/nginx
-
-	# logrotate
-	insinto /etc/logrotate.d
-	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
-
-	if use luajit; then
-		pax-mark m "${ED%/}/usr/sbin/nginx"
-	fi
-
-	if use nginx_modules_http_perl; then
-		cd "${S}"/objs/src/http/modules/perl/ || die
-		emake DESTDIR="${D}" INSTALLDIRS=vendor
-		perl_delete_localpod
-		cd "${S}" || die
-	fi
-
-	if use nginx_modules_http_cache_purge; then
-		docinto ${HTTP_CACHE_PURGE_MODULE_P}
-		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
-	fi
-
-	if use nginx_modules_http_slowfs_cache; then
-		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
-		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
-	fi
-
-	if use nginx_modules_http_fancyindex; then
-		docinto ${HTTP_FANCYINDEX_MODULE_P}
-		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_lua; then
-		docinto ${HTTP_LUA_MODULE_P}
-		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_pam; then
-		docinto ${HTTP_AUTH_PAM_MODULE_P}
-		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
-	fi
-
-	if use nginx_modules_http_upstream_check; then
-		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
-		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
-	fi
-
-	if use nginx_modules_http_naxsi; then
-		insinto /etc/nginx
-		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
-	fi
-
-	if use rtmp; then
-		docinto ${RTMP_MODULE_P}
-		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
-	fi
-
-	if use nginx_modules_http_dav_ext; then
-		docinto ${HTTP_DAV_EXT_MODULE_P}
-		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
-	fi
-
-	if use nginx_modules_http_echo; then
-		docinto ${HTTP_ECHO_MODULE_P}
-		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_security; then
-		docinto ${HTTP_SECURITY_MODULE_P}
-		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
-	fi
-
-	if use nginx_modules_http_push_stream; then
-		docinto ${HTTP_PUSH_STREAM_MODULE_P}
-		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
-	fi
-
-	if use nginx_modules_http_sticky; then
-		docinto ${HTTP_STICKY_MODULE_P}
-		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
-	fi
-
-	if use nginx_modules_http_memc; then
-		docinto ${HTTP_MEMC_MODULE_P}
-		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
-	fi
-
-	if use nginx_modules_http_auth_ldap; then
-		docinto ${HTTP_LDAP_MODULE_P}
-		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
-	fi
-}
-
-pkg_postinst() {
-	if use ssl; then
-		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
-			install_cert /etc/ssl/${PN}/${PN}
-			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
-		fi
-	fi
-
-	if use nginx_modules_http_spdy; then
-		ewarn ""
-		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
-		ewarn "Update your configs and package.use accordingly."
-	fi
-
-	if use nginx_modules_http_lua; then
-		ewarn ""
-		ewarn "While you can build lua 3rd party module against ${P}"
-		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
-		ewarn "officially supported target yet. You are on your own."
-		ewarn "Expect runtime failures, memory leaks and other problems!"
-	fi
-
-	if use nginx_modules_http_lua && use http2; then
-		ewarn ""
-		ewarn "Lua 3rd party module author warns against using ${P} with"
-		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
-	fi
-
-	local _n_permission_layout_checks=0
-	local _has_to_adjust_permissions=0
-	local _has_to_show_permission_warning=0
-
-	# Defaults to 1 to inform people doing a fresh installation
-	# that we ship modified {scgi,uwsgi,fastcgi}_params files
-	local _has_to_show_httpoxy_mitigation_notice=1
-
-	local _replacing_version=
-	for _replacing_version in ${REPLACING_VERSIONS}; do
-		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
-
-		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
-			# Should never happen:
-			# Package is abusing slots but doesn't allow multiple parallel installations.
-			# If we run into this situation it is unsafe to automatically adjust any
-			# permission...
-			_has_to_show_permission_warning=1
-
-			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
-				"You will have to adjust permissions on your own."
-
-			break
-		fi
-
-		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
-		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
-
-		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
-		# This was before we introduced multiple nginx versions so we
-		# do not need to distinguish between stable and mainline
-		local _need_to_fix_CVE2013_0337=1
-
-		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
-			# We are updating an installation which should already be fixed
-			_need_to_fix_CVE2013_0337=0
-			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
-		else
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
-		fi
-
-		# Do we need to inform about HTTPoxy mitigation?
-		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_show_httpoxy_mitigation_notice=1
-			debug-print "Need to inform about HTTPoxy mitigation!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.1-r2"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.3-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that the user has
-					# already seen the HTTPoxy mitigation notice because he/she is doing
-					# an update from previous version where we have already shown
-					# the warning. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation where we already informed
-				# that we are mitigating HTTPoxy per default
-				_has_to_show_httpoxy_mitigation_notice=0
-				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
-			else
-				_has_to_show_httpoxy_mitigation_notice=1
-				debug-print "Need to inform about HTTPoxy mitigation!"
-			fi
-		fi
-
-		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
-		# All branches up to 1.11 are affected
-		local _need_to_fix_CVE2016_1247=1
-
-		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
-			# Updating from <1.10
-			_has_to_adjust_permissions=1
-			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-		else
-			# Updating from >=1.10
-			local _fixed_in_pvr=
-			case "${_replacing_version_branch}" in
-				"1.10")
-					_fixed_in_pvr="1.10.2-r3"
-					;;
-				"1.11")
-					_fixed_in_pvr="1.11.6-r1"
-					;;
-				*)
-					# This should be any future branch.
-					# If we run this code it is safe to assume that we have already
-					# adjusted permissions or were never affected because user is
-					# doing an update from previous version which was safe or did
-					# the adjustments. Otherwise, we wouldn't hit this code path ...
-					_fixed_in_pvr=
-			esac
-
-			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
-				# We are updating an installation which should already be adjusted
-				# or which was never affected
-				_need_to_fix_CVE2016_1247=0
-				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
-			else
-				_has_to_adjust_permissions=1
-				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
-			fi
-		fi
-	done
-
-	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
-		# We do not DIE when chmod/chown commands are failing because
-		# package is already merged on user's system at this stage
-		# and we cannot retry without losing the information that
-		# the existing installation needs to adjust permissions.
-		# Instead we are going to a show a big warning ...
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The world-readable bit (if set) has been removed from the"
-			ewarn "following directories to mitigate a security bug"
-			ewarn "(CVE-2013-0337, bug #458726):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn "  ${EPREFIX%/}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX%/}${NGINX_HOME_TMP}'"
-			chmod o-rwx \
-				"${EPREFIX%/}"/var/log/nginx \
-				"${EPREFIX%/}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
-				_has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
-			ewarn ""
-			ewarn "The permissions on the following directory have been reset in"
-			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
-			ewarn ""
-			ewarn "  ${EPREFIX%/}/var/log/nginx"
-			ewarn ""
-			ewarn "Check if this is correct for your setup before restarting nginx!"
-			ewarn "Also ensure that no other log directory used by any of your"
-			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-			ewarn "used by nginx can be abused to escalate privileges!"
-			ewarn "This is a one-time change and will not happen on subsequent updates."
-			chown 0:nginx "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-			chmod 710 "${EPREFIX%/}"/var/log/nginx || _has_to_show_permission_warning=1
-		fi
-
-		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
-			# Should never happen ...
-			ewarn ""
-			ewarn "*************************************************************"
-			ewarn "***************         W A R N I N G         ***************"
-			ewarn "*************************************************************"
-			ewarn "The one-time only attempt to adjust permissions of the"
-			ewarn "existing nginx installation failed. Be aware that we will not"
-			ewarn "try to adjust the same permissions again because now you are"
-			ewarn "using a nginx version where we expect that the permissions"
-			ewarn "are already adjusted or that you know what you are doing and"
-			ewarn "want to keep custom permissions."
-			ewarn ""
-		fi
-	fi
-
-	# Sanity check for CVE-2016-1247
-	# Required to warn users who received the warning above and thought
-	# they could fix it by unmerging and re-merging the package or have
-	# unmerged a affected installation on purpose in the past leaving
-	# /var/log/nginx on their system due to keepdir/non-empty folder
-	# and are now installing the package again.
-	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX%/}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
-	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
-	if [ $? -eq 0 ] ; then
-		# Cleanup -- no reason to die here!
-		rm -f "${_sanity_check_testfile}"
-
-		ewarn ""
-		ewarn "*************************************************************"
-		ewarn "***************         W A R N I N G         ***************"
-		ewarn "*************************************************************"
-		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
-		ewarn "(bug #605008) because nginx user is able to create files in"
-		ewarn ""
-		ewarn "  ${EPREFIX%/}/var/log/nginx"
-		ewarn ""
-		ewarn "Also ensure that no other log directory used by any of your"
-		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
-		ewarn "used by nginx can be abused to escalate privileges!"
-	fi
-
-	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
-		# HTTPoxy mitigation
-		ewarn ""
-		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
-		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
-		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
-		ewarn "are sourcing one of the default"
-		ewarn ""
-		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
-		ewarn "  - 'scgi_params'"
-		ewarn "  - 'uwsgi_params'"
-		ewarn ""
-		ewarn "files in your server block(s)."
-		ewarn ""
-		ewarn "If this is causing any problems for you make sure that you are sourcing the"
-		ewarn "default parameters _before_ you set your own values."
-		ewarn "If you are relying on user-supplied proxy values you have to remove the"
-		ewarn "correlating lines from the file(s) mentioned above."
-		ewarn ""
-	fi
-}
diff --git a/www-servers/nginx/nginx-1.18.0-r999.ebuild b/www-servers/nginx/nginx-1.18.0-r999.ebuild
new file mode 100644
index 0000000..d00bce6
--- /dev/null
+++ b/www-servers/nginx/nginx-1.18.0-r999.ebuild
@@ -0,0 +1,1106 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+# Maintainer notes:
+# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
+# - any http-module activates the main http-functionality and overrides USE=-http
+# - keep the following requirements in mind before adding external modules:
+#	* alive upstream
+#	* sane packaging
+#	* builds cleanly
+#	* does not need a patch for nginx core
+# - TODO: test the google-perftools module (included in vanilla tarball)
+
+# prevent perl-module from adding automagic perl DEPENDs
+GENTOO_DEPEND_ON_PERL="no"
+
+# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
+DEVEL_KIT_MODULE_PV="0.3.1"
+DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
+DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
+DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
+
+# ngx_brotli (https://github.com/eustas/ngx_brotli, BSD-2)
+HTTP_BROTLI_MODULE_PV="25f86f0bac1101b6512135eac5f93c49c63609e3"
+HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
+HTTP_BROTLI_MODULE_URI="https://github.com/google/ngx_brotli/archive/${HTTP_BROTLI_MODULE_PV}.tar.gz"
+HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
+
+# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
+HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
+HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
+HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
+HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
+
+# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
+HTTP_HEADERS_MORE_MODULE_PV="0.33"
+HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
+HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
+HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
+
+# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
+HTTP_CACHE_PURGE_MODULE_PV="2.3"
+HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
+HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
+HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
+
+# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
+HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
+HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
+HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
+HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
+
+# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
+HTTP_FANCYINDEX_MODULE_PV="0.4.4"
+HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
+HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
+HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
+
+# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
+HTTP_LUA_MODULE_PV="0.10.15"
+HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
+HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
+HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
+
+# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
+HTTP_AUTH_PAM_MODULE_PV="1.5.2"
+HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
+HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
+HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
+
+# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
+HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
+HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
+HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
+HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
+
+# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
+HTTP_METRICS_MODULE_PV="0.1.1"
+HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
+HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
+HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
+
+# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
+
+# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
+HTTP_NAXSI_MODULE_PV="0.56"
+HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
+HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
+HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
+
+# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
+RTMP_MODULE_PV="1.2.1"
+RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
+RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
+RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
+
+# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
+HTTP_DAV_EXT_MODULE_PV="3.0.0"
+HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
+HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
+HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
+
+# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
+HTTP_ECHO_MODULE_PV="0.62"
+HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
+HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
+HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
+
+# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
+# keep the MODULE_P here consistent with upstream to avoid tarball duplication
+HTTP_SECURITY_MODULE_PV="2.9.3"
+HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
+HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
+HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
+
+# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
+HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
+HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
+HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
+HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
+
+# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
+HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
+HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
+HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
+HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
+
+# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
+HTTP_MOGILEFS_MODULE_PV="1.0.4"
+HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
+HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
+HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
+
+# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
+HTTP_MEMC_MODULE_PV="0.19"
+HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
+HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
+HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
+
+# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
+HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
+HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
+HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
+HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
+
+# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
+GEOIP2_MODULE_PV="3.3"
+GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
+GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
+GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
+
+# njs-module (https://github.com/nginx/njs, as-is)
+NJS_MODULE_PV="0.4.3"
+NJS_MODULE_P="njs-${NJS_MODULE_PV}"
+NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
+NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
+
+HTTP_XSLTPROC_MODULE_PV="0.17"
+HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
+HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
+HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
+
+# We handle deps below ourselves
+SSL_DEPS_SKIP=1
+AUTOTOOLS_AUTO_DEPEND="no"
+
+inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
+
+DESCRIPTION="Robust, small and high performance http and reverse proxy server"
+HOMEPAGE="https://nginx.org"
+SRC_URI="https://nginx.org/download/${P}.tar.gz
+	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
+	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
+	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
+	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
+	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
+	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
+	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
+	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
+	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
+	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
+	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
+	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
+	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
+	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
+	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
+	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
+	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
+	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
+	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
+	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
+	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
+	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
+	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
+	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
+	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
+	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
+	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
+
+LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
+	nginx_modules_http_security? ( Apache-2.0 )
+	nginx_modules_http_push_stream? ( GPL-3 )"
+
+SLOT="0"
+KEYWORDS="amd64 ~arm ~arm64 ~ppc ~ppc64 x86 ~amd64-linux ~x86-linux"
+
+# Package doesn't provide a real test suite
+RESTRICT="test"
+
+NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
+	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
+	proxy referer rewrite scgi ssi split_clients upstream_hash
+	upstream_ip_hash upstream_keepalive upstream_least_conn
+	upstream_zone userid uwsgi"
+NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
+	gzip_static image_filter mp4 perl random_index realip secure_link
+	slice stub_status sub xslt"
+NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
+	upstream_hash upstream_least_conn upstream_zone"
+NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
+NGINX_MODULES_MAIL="imap pop3 smtp"
+NGINX_MODULES_3RD="
+	http_auth_ldap
+	http_auth_pam
+	http_brotli
+	http_cache_purge
+	http_dav_ext
+	http_echo
+	http_fancyindex
+	http_geoip2
+	http_headers_more
+	http_javascript
+	http_lua
+	http_memc
+	http_metrics
+	http_mogilefs
+	http_naxsi
+	http_push_stream
+	http_security
+	http_slowfs_cache
+	http_sticky
+	http_upload_progress
+	http_upstream_check
+	http_vhost_traffic_status
+	stream_geoip2
+	stream_javascript
+	http_xsltproc
+"
+
+IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
+	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
+
+for mod in $NGINX_MODULES_STD; do
+	IUSE="${IUSE} +nginx_modules_http_${mod}"
+done
+
+for mod in $NGINX_MODULES_OPT; do
+	IUSE="${IUSE} nginx_modules_http_${mod}"
+done
+
+for mod in $NGINX_MODULES_STREAM_STD; do
+	IUSE="${IUSE} nginx_modules_stream_${mod}"
+done
+
+for mod in $NGINX_MODULES_STREAM_OPT; do
+	IUSE="${IUSE} nginx_modules_stream_${mod}"
+done
+
+for mod in $NGINX_MODULES_MAIL; do
+	IUSE="${IUSE} nginx_modules_mail_${mod}"
+done
+
+for mod in $NGINX_MODULES_3RD; do
+	IUSE="${IUSE} nginx_modules_${mod}"
+done
+
+# Add so we can warn users updating about config changes
+# @TODO: jbergstroem: remove on next release series
+IUSE="${IUSE} nginx_modules_http_spdy"
+
+CDEPEND="
+	pcre? ( dev-libs/libpcre:= )
+	pcre-jit? ( dev-libs/libpcre:=[jit] )
+	ssl? (
+		!libressl? ( dev-libs/openssl:0= )
+		libressl? ( dev-libs/libressl:= )
+	)
+	http2? (
+		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
+		libressl? ( dev-libs/libressl:= )
+	)
+	http-cache? (
+		userland_GNU? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+		)
+	)
+	nginx_modules_http_brotli? ( app-arch/brotli:= )
+	nginx_modules_http_geoip? ( dev-libs/geoip )
+	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
+	nginx_modules_http_gunzip? ( sys-libs/zlib )
+	nginx_modules_http_gzip? ( sys-libs/zlib )
+	nginx_modules_http_gzip_static? ( sys-libs/zlib )
+	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
+	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
+	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
+	nginx_modules_http_secure_link? (
+		userland_GNU? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+		)
+	)
+	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
+	nginx_modules_http_lua? ( dev-lang/luajit:2= )
+	nginx_modules_http_auth_pam? ( sys-libs/pam )
+	nginx_modules_http_metrics? ( dev-libs/yajl:= )
+	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
+	nginx_modules_http_security? (
+		dev-libs/apr:=
+		dev-libs/apr-util:=
+		dev-libs/libxml2:=
+		net-misc/curl
+		www-servers/apache
+	)
+	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
+	nginx_modules_stream_geoip? ( dev-libs/geoip )
+	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
+	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
+	xsltproc-memcached? ( dev-libs/libmemcached )"
+RDEPEND="${CDEPEND}
+	selinux? ( sec-policy/selinux-nginx )
+	!www-servers/nginx:mainline"
+DEPEND="${CDEPEND}
+	nginx_modules_http_brotli? ( virtual/pkgconfig )
+	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
+	arm? ( dev-libs/libatomic_ops )
+	libatomic? ( dev-libs/libatomic_ops )"
+PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
+
+REQUIRED_USE="pcre-jit? ( pcre )
+	nginx_modules_http_fancyindex? ( nginx_modules_http_addition )
+	nginx_modules_http_grpc? ( http2 )
+	nginx_modules_http_lua? (
+		luajit
+		nginx_modules_http_rewrite
+	)
+	nginx_modules_http_naxsi? ( pcre )
+	nginx_modules_http_dav_ext? ( nginx_modules_http_dav nginx_modules_http_xslt )
+	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
+	nginx_modules_http_security? ( pcre )
+	nginx_modules_http_push_stream? ( ssl )
+	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
+
+pkg_setup() {
+	NGINX_HOME="/var/lib/nginx"
+	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
+
+	ebegin "Creating nginx user and group"
+	enewgroup ${PN}
+	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
+	eend $?
+
+	if use libatomic; then
+		ewarn "GCC 4.1+ features built-in atomic operations."
+		ewarn "Using libatomic_ops is only needed if using"
+		ewarn "a different compiler or a GCC prior to 4.1"
+	fi
+
+	if [[ -n $NGINX_ADD_MODULES ]]; then
+		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
+		ewarn "This nginx installation is not supported!"
+		ewarn "Make sure you can reproduce the bug without those modules"
+		ewarn "_before_ reporting bugs."
+	fi
+
+	if use !http; then
+		ewarn "To actually disable all http-functionality you also have to disable"
+		ewarn "all nginx http modules."
+	fi
+
+	if use nginx_modules_http_mogilefs && use threads; then
+		eerror "mogilefs won't compile with threads support."
+		eerror "Please disable either flag and try again."
+		die "Can't compile mogilefs with threads support"
+	fi
+}
+
+src_prepare() {
+	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
+	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
+
+	if use nginx_modules_http_brotli; then
+		cd "${HTTP_BROTLI_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_brotli-detect-brotli-r3.patch
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_security; then
+		cd "${HTTP_SECURITY_MODULE_WD}" || die
+
+		eautoreconf
+
+		if use luajit ; then
+			sed -i \
+				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
+				configure || die
+		fi
+
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_upload_progress; then
+		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
+		cd "${S}" || die
+	fi
+
+	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
+	# We have config protection, don't rename etc files
+	sed -i 's:.default::' auto/install || die
+	# remove useless files
+	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
+
+	# don't install to /etc/nginx/ if not in use
+	local module
+	for module in fastcgi scgi uwsgi ; do
+		if ! use nginx_modules_http_${module}; then
+			sed -i -e "/${module}/d" auto/install || die
+		fi
+	done
+
+	if use xsltproc-memcached; then
+		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
+	fi
+
+	eapply_user
+}
+
+src_configure() {
+	# mod_security needs to generate nginx/modsecurity/config before including it
+	if use nginx_modules_http_security; then
+		cd "${HTTP_SECURITY_MODULE_WD}" || die
+
+		./configure \
+			--enable-standalone-module \
+			--disable-mlogc \
+			--with-ssdeep=no \
+			$(use_enable pcre-jit) \
+			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
+
+		cd "${S}" || die
+	fi
+
+	local myconf=() http_enabled= mail_enabled= stream_enabled=
+
+	use aio       && myconf+=( --with-file-aio )
+	use debug     && myconf+=( --with-debug )
+	use http2     && myconf+=( --with-http_v2_module )
+	use libatomic && myconf+=( --with-libatomic )
+	use pcre      && myconf+=( --with-pcre )
+	use pcre-jit  && myconf+=( --with-pcre-jit )
+	use threads   && myconf+=( --with-threads )
+
+	# HTTP modules
+	for mod in $NGINX_MODULES_STD; do
+		if use nginx_modules_http_${mod}; then
+			http_enabled=1
+		else
+			myconf+=( --without-http_${mod}_module )
+		fi
+	done
+
+	for mod in $NGINX_MODULES_OPT; do
+		if use nginx_modules_http_${mod}; then
+			http_enabled=1
+			myconf+=( --with-http_${mod}_module )
+		fi
+	done
+
+	if use nginx_modules_http_fastcgi; then
+		myconf+=( --with-http_realip_module )
+	fi
+
+	# third-party modules
+	if use nginx_modules_http_upload_progress; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_headers_more; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_slowfs_cache; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_fancyindex; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_lua; then
+		http_enabled=1
+		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
+		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
+		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
+		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_auth_pam; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_metrics; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_naxsi ; then
+		http_enabled=1
+		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
+	fi
+
+	if use rtmp ; then
+		http_enabled=1
+		myconf+=( --add-module=${RTMP_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_dav_ext ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_echo ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_security ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
+	fi
+
+	if use nginx_modules_http_push_stream ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_sticky ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_mogilefs ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_memc ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_auth_ldap; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_vhost_traffic_status; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
+		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
+		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
+	fi
+
+	if use nginx_modules_http_brotli; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_xsltproc; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
+	fi
+
+	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
+		http_enabled=1
+	fi
+
+	if [ $http_enabled ]; then
+		use http-cache || myconf+=( --without-http-cache )
+		use ssl && myconf+=( --with-http_ssl_module )
+	else
+		myconf+=( --without-http --without-http-cache )
+	fi
+
+	# Stream modules
+	for mod in $NGINX_MODULES_STREAM_STD; do
+		if use nginx_modules_stream_${mod}; then
+			stream_enabled=1
+		else
+			myconf+=( --without-stream_${mod}_module )
+		fi
+	done
+
+	for mod in $NGINX_MODULES_STREAM_OPT; do
+		if use nginx_modules_stream_${mod}; then
+			stream_enabled=1
+			myconf+=( --with-stream_${mod}_module )
+		fi
+	done
+
+	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
+		stream_enabled=1
+	fi
+
+	if [ $stream_enabled ]; then
+		myconf+=( --with-stream )
+		use ssl && myconf+=( --with-stream_ssl_module )
+	fi
+
+	# MAIL modules
+	for mod in $NGINX_MODULES_MAIL; do
+		if use nginx_modules_mail_${mod}; then
+			mail_enabled=1
+		else
+			myconf+=( --without-mail_${mod}_module )
+		fi
+	done
+
+	if [ $mail_enabled ]; then
+		myconf+=( --with-mail )
+		use ssl && myconf+=( --with-mail_ssl_module )
+	fi
+
+	# custom modules
+	for mod in $NGINX_ADD_MODULES; do
+		myconf+=(  --add-module=${mod} )
+	done
+
+	# https://bugs.gentoo.org/286772
+	export LANG=C LC_ALL=C
+	tc-export CC
+
+	if ! use prefix; then
+		myconf+=( --user=${PN} )
+		myconf+=( --group=${PN} )
+	fi
+
+	local WITHOUT_IPV6=
+	if ! use ipv6; then
+		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
+	fi
+
+	if [[ -n "${EXTRA_ECONF}" ]]; then
+		myconf+=( ${EXTRA_ECONF} )
+		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
+	fi
+
+	./configure \
+		--prefix="${EPREFIX}"/usr \
+		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
+		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
+		--pid-path="${EPREFIX}"/run/${PN}.pid \
+		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
+		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
+		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
+		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
+		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
+		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
+		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
+		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
+		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
+		--with-compat \
+		"${myconf[@]}" || die "configure failed"
+
+	# A purely cosmetic change that makes nginx -V more readable. This can be
+	# good if people outside the gentoo community would troubleshoot and
+	# question the users setup.
+	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
+}
+
+src_compile() {
+	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
+
+	# https://bugs.gentoo.org/286772
+	export LANG=C LC_ALL=C
+	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
+}
+
+src_install() {
+	emake DESTDIR="${D%/}" install
+
+	cp "${FILESDIR}"/nginx.conf-r2 "${ED%/}"/etc/nginx/nginx.conf || die
+
+	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
+	newconfd "${FILESDIR}"/nginx.confd nginx
+
+	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
+
+	doman man/nginx.8
+	dodoc CHANGES* README
+
+	# just keepdir. do not copy the default htdocs files (bug #449136)
+	keepdir /var/www/localhost
+	rm -rf "${ED%/}"/usr/html || die
+
+	# set up a list of directories to keep
+	local keepdir_list="${NGINX_HOME_TMP}"/client
+	local module
+	for module in proxy fastcgi scgi uwsgi; do
+		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
+	done
+
+	keepdir /var/log/nginx ${keepdir_list}
+
+	# this solves a problem with SELinux where nginx doesn't see the directories
+	# as root and tries to create them as nginx
+	fperms 0750 "${NGINX_HOME_TMP}"
+	fowners ${PN}:0 "${NGINX_HOME_TMP}"
+
+	fperms 0700 ${keepdir_list}
+	fowners ${PN}:${PN} ${keepdir_list}
+
+	fperms 0710 /var/log/nginx
+	fowners 0:${PN} /var/log/nginx
+
+	# logrotate
+	insinto /etc/logrotate.d
+	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
+
+	# Don't create /run
+	rm -rf "${ED%/}"/run || die
+
+	if use luajit; then
+		pax-mark m "${ED%/}/usr/sbin/nginx"
+	fi
+
+	if use nginx_modules_http_perl; then
+		cd "${S}"/objs/src/http/modules/perl/ || die
+		emake DESTDIR="${D}" INSTALLDIRS=vendor
+		perl_delete_localpod
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		docinto ${HTTP_CACHE_PURGE_MODULE_P}
+		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
+	fi
+
+	if use nginx_modules_http_slowfs_cache; then
+		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
+		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
+	fi
+
+	if use nginx_modules_http_fancyindex; then
+		docinto ${HTTP_FANCYINDEX_MODULE_P}
+		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
+	fi
+
+	if use nginx_modules_http_lua; then
+		docinto ${HTTP_LUA_MODULE_P}
+		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_auth_pam; then
+		docinto ${HTTP_AUTH_PAM_MODULE_P}
+		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
+		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
+	fi
+
+	if use nginx_modules_http_naxsi; then
+		insinto /etc/nginx
+		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
+	fi
+
+	if use rtmp; then
+		docinto ${RTMP_MODULE_P}
+		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
+	fi
+
+	if use nginx_modules_http_dav_ext; then
+		docinto ${HTTP_DAV_EXT_MODULE_P}
+		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
+	fi
+
+	if use nginx_modules_http_echo; then
+		docinto ${HTTP_ECHO_MODULE_P}
+		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_security; then
+		docinto ${HTTP_SECURITY_MODULE_P}
+		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
+	fi
+
+	if use nginx_modules_http_push_stream; then
+		docinto ${HTTP_PUSH_STREAM_MODULE_P}
+		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
+	fi
+
+	if use nginx_modules_http_sticky; then
+		docinto ${HTTP_STICKY_MODULE_P}
+		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
+	fi
+
+	if use nginx_modules_http_memc; then
+		docinto ${HTTP_MEMC_MODULE_P}
+		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_auth_ldap; then
+		docinto ${HTTP_LDAP_MODULE_P}
+		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
+	fi
+}
+
+pkg_postinst() {
+	if use ssl; then
+		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
+			install_cert /etc/ssl/${PN}/${PN}
+			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
+		fi
+	fi
+
+	if use nginx_modules_http_spdy; then
+		ewarn ""
+		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
+		ewarn "Update your configs and package.use accordingly."
+	fi
+
+	if use nginx_modules_http_lua; then
+		ewarn ""
+		ewarn "While you can build lua 3rd party module against ${P}"
+		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
+		ewarn "officially supported target yet. You are on your own."
+		ewarn "Expect runtime failures, memory leaks and other problems!"
+	fi
+
+	if use nginx_modules_http_lua && use http2; then
+		ewarn ""
+		ewarn "Lua 3rd party module author warns against using ${P} with"
+		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
+	fi
+
+	local _n_permission_layout_checks=0
+	local _has_to_adjust_permissions=0
+	local _has_to_show_permission_warning=0
+
+	# Defaults to 1 to inform people doing a fresh installation
+	# that we ship modified {scgi,uwsgi,fastcgi}_params files
+	local _has_to_show_httpoxy_mitigation_notice=1
+
+	local _replacing_version=
+	for _replacing_version in ${REPLACING_VERSIONS}; do
+		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
+
+		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
+			# Should never happen:
+			# Package is abusing slots but doesn't allow multiple parallel installations.
+			# If we run into this situation it is unsafe to automatically adjust any
+			# permission...
+			_has_to_show_permission_warning=1
+
+			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
+				"You will have to adjust permissions on your own."
+
+			break
+		fi
+
+		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
+		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
+
+		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
+		# This was before we introduced multiple nginx versions so we
+		# do not need to distinguish between stable and mainline
+		local _need_to_fix_CVE2013_0337=1
+
+		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
+			# We are updating an installation which should already be fixed
+			_need_to_fix_CVE2013_0337=0
+			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
+		else
+			_has_to_adjust_permissions=1
+			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
+		fi
+
+		# Do we need to inform about HTTPoxy mitigation?
+		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
+		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
+			# Updating from <1.10
+			_has_to_show_httpoxy_mitigation_notice=1
+			debug-print "Need to inform about HTTPoxy mitigation!"
+		else
+			# Updating from >=1.10
+			local _fixed_in_pvr=
+			case "${_replacing_version_branch}" in
+				"1.10")
+					_fixed_in_pvr="1.10.1-r2"
+					;;
+				"1.11")
+					_fixed_in_pvr="1.11.3-r1"
+					;;
+				*)
+					# This should be any future branch.
+					# If we run this code it is safe to assume that the user has
+					# already seen the HTTPoxy mitigation notice because he/she is doing
+					# an update from previous version where we have already shown
+					# the warning. Otherwise, we wouldn't hit this code path ...
+					_fixed_in_pvr=
+			esac
+
+			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
+				# We are updating an installation where we already informed
+				# that we are mitigating HTTPoxy per default
+				_has_to_show_httpoxy_mitigation_notice=0
+				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
+			else
+				_has_to_show_httpoxy_mitigation_notice=1
+				debug-print "Need to inform about HTTPoxy mitigation!"
+			fi
+		fi
+
+		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
+		# All branches up to 1.11 are affected
+		local _need_to_fix_CVE2016_1247=1
+
+		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
+			# Updating from <1.10
+			_has_to_adjust_permissions=1
+			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
+		else
+			# Updating from >=1.10
+			local _fixed_in_pvr=
+			case "${_replacing_version_branch}" in
+				"1.10")
+					_fixed_in_pvr="1.10.2-r3"
+					;;
+				"1.11")
+					_fixed_in_pvr="1.11.6-r1"
+					;;
+				*)
+					# This should be any future branch.
+					# If we run this code it is safe to assume that we have already
+					# adjusted permissions or were never affected because user is
+					# doing an update from previous version which was safe or did
+					# the adjustments. Otherwise, we wouldn't hit this code path ...
+					_fixed_in_pvr=
+			esac
+
+			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
+				# We are updating an installation which should already be adjusted
+				# or which was never affected
+				_need_to_fix_CVE2016_1247=0
+				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
+			else
+				_has_to_adjust_permissions=1
+				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
+			fi
+		fi
+	done
+
+	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
+		# We do not DIE when chmod/chown commands are failing because
+		# package is already merged on user's system at this stage
+		# and we cannot retry without losing the information that
+		# the existing installation needs to adjust permissions.
+		# Instead we are going to a show a big warning ...
+
+		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
+			ewarn ""
+			ewarn "The world-readable bit (if set) has been removed from the"
+			ewarn "following directories to mitigate a security bug"
+			ewarn "(CVE-2013-0337, bug #458726):"
+			ewarn ""
+			ewarn "  ${EPREFIX}/var/log/nginx"
+			ewarn "  ${EPREFIX}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
+			ewarn ""
+			ewarn "Check if this is correct for your setup before restarting nginx!"
+			ewarn "This is a one-time change and will not happen on subsequent updates."
+			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX}${NGINX_HOME_TMP}'"
+			chmod o-rwx \
+				"${EPREFIX}"/var/log/nginx \
+				"${EPREFIX}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
+				_has_to_show_permission_warning=1
+		fi
+
+		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
+			ewarn ""
+			ewarn "The permissions on the following directory have been reset in"
+			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
+			ewarn ""
+			ewarn "  ${EPREFIX}/var/log/nginx"
+			ewarn ""
+			ewarn "Check if this is correct for your setup before restarting nginx!"
+			ewarn "Also ensure that no other log directory used by any of your"
+			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
+			ewarn "used by nginx can be abused to escalate privileges!"
+			ewarn "This is a one-time change and will not happen on subsequent updates."
+			chown 0:nginx "${EPREFIX}"/var/log/nginx || _has_to_show_permission_warning=1
+			chmod 710 "${EPREFIX}"/var/log/nginx || _has_to_show_permission_warning=1
+		fi
+
+		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
+			# Should never happen ...
+			ewarn ""
+			ewarn "*************************************************************"
+			ewarn "***************         W A R N I N G         ***************"
+			ewarn "*************************************************************"
+			ewarn "The one-time only attempt to adjust permissions of the"
+			ewarn "existing nginx installation failed. Be aware that we will not"
+			ewarn "try to adjust the same permissions again because now you are"
+			ewarn "using a nginx version where we expect that the permissions"
+			ewarn "are already adjusted or that you know what you are doing and"
+			ewarn "want to keep custom permissions."
+			ewarn ""
+		fi
+	fi
+
+	# Sanity check for CVE-2016-1247
+	# Required to warn users who received the warning above and thought
+	# they could fix it by unmerging and re-merging the package or have
+	# unmerged a affected installation on purpose in the past leaving
+	# /var/log/nginx on their system due to keepdir/non-empty folder
+	# and are now installing the package again.
+	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
+	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
+	if [ $? -eq 0 ] ; then
+		# Cleanup -- no reason to die here!
+		rm -f "${_sanity_check_testfile}"
+
+		ewarn ""
+		ewarn "*************************************************************"
+		ewarn "***************         W A R N I N G         ***************"
+		ewarn "*************************************************************"
+		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
+		ewarn "(bug #605008) because nginx user is able to create files in"
+		ewarn ""
+		ewarn "  ${EPREFIX}/var/log/nginx"
+		ewarn ""
+		ewarn "Also ensure that no other log directory used by any of your"
+		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
+		ewarn "used by nginx can be abused to escalate privileges!"
+	fi
+
+	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
+		# HTTPoxy mitigation
+		ewarn ""
+		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
+		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
+		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
+		ewarn "are sourcing one of the default"
+		ewarn ""
+		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
+		ewarn "  - 'scgi_params'"
+		ewarn "  - 'uwsgi_params'"
+		ewarn ""
+		ewarn "files in your server block(s)."
+		ewarn ""
+		ewarn "If this is causing any problems for you make sure that you are sourcing the"
+		ewarn "default parameters _before_ you set your own values."
+		ewarn "If you are relying on user-supplied proxy values you have to remove the"
+		ewarn "correlating lines from the file(s) mentioned above."
+		ewarn ""
+	fi
+}
diff --git a/www-servers/nginx/nginx-1.19.6-r999.ebuild b/www-servers/nginx/nginx-1.19.6-r999.ebuild
new file mode 100644
index 0000000..47e3885
--- /dev/null
+++ b/www-servers/nginx/nginx-1.19.6-r999.ebuild
@@ -0,0 +1,1106 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI="6"
+
+# Maintainer notes:
+# - http_rewrite-independent pcre-support makes sense for matching locations without an actual rewrite
+# - any http-module activates the main http-functionality and overrides USE=-http
+# - keep the following requirements in mind before adding external modules:
+#	* alive upstream
+#	* sane packaging
+#	* builds cleanly
+#	* does not need a patch for nginx core
+# - TODO: test the google-perftools module (included in vanilla tarball)
+
+# prevent perl-module from adding automagic perl DEPENDs
+GENTOO_DEPEND_ON_PERL="no"
+
+# devel_kit (https://github.com/simpl/ngx_devel_kit, BSD license)
+DEVEL_KIT_MODULE_PV="0.3.1"
+DEVEL_KIT_MODULE_P="ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
+DEVEL_KIT_MODULE_URI="https://github.com/simpl/ngx_devel_kit/archive/v${DEVEL_KIT_MODULE_PV}.tar.gz"
+DEVEL_KIT_MODULE_WD="${WORKDIR}/ngx_devel_kit-${DEVEL_KIT_MODULE_PV}"
+
+# ngx_brotli (https://github.com/google/ngx_brotli, BSD-2)
+HTTP_BROTLI_MODULE_PV="1.0.0rc"
+HTTP_BROTLI_MODULE_P="ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
+HTTP_BROTLI_MODULE_URI="https://github.com/google/ngx_brotli/archive/v${HTTP_BROTLI_MODULE_PV}.tar.gz"
+HTTP_BROTLI_MODULE_WD="${WORKDIR}/ngx_brotli-${HTTP_BROTLI_MODULE_PV}"
+
+# http_uploadprogress (https://github.com/masterzen/nginx-upload-progress-module, BSD-2 license)
+HTTP_UPLOAD_PROGRESS_MODULE_PV="0.9.2"
+HTTP_UPLOAD_PROGRESS_MODULE_P="ngx_http_upload_progress-${HTTP_UPLOAD_PROGRESS_MODULE_PV}-r1"
+HTTP_UPLOAD_PROGRESS_MODULE_URI="https://github.com/masterzen/nginx-upload-progress-module/archive/v${HTTP_UPLOAD_PROGRESS_MODULE_PV}.tar.gz"
+HTTP_UPLOAD_PROGRESS_MODULE_WD="${WORKDIR}/nginx-upload-progress-module-${HTTP_UPLOAD_PROGRESS_MODULE_PV}"
+
+# http_headers_more (https://github.com/agentzh/headers-more-nginx-module, BSD license)
+HTTP_HEADERS_MORE_MODULE_PV="0.33"
+HTTP_HEADERS_MORE_MODULE_P="ngx_http_headers_more-${HTTP_HEADERS_MORE_MODULE_PV}"
+HTTP_HEADERS_MORE_MODULE_URI="https://github.com/agentzh/headers-more-nginx-module/archive/v${HTTP_HEADERS_MORE_MODULE_PV}.tar.gz"
+HTTP_HEADERS_MORE_MODULE_WD="${WORKDIR}/headers-more-nginx-module-${HTTP_HEADERS_MORE_MODULE_PV}"
+
+# http_cache_purge (http://labs.frickle.com/nginx_ngx_cache_purge/, https://github.com/FRiCKLE/ngx_cache_purge, BSD-2 license)
+HTTP_CACHE_PURGE_MODULE_PV="2.3"
+HTTP_CACHE_PURGE_MODULE_P="ngx_http_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
+HTTP_CACHE_PURGE_MODULE_URI="http://labs.frickle.com/files/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}.tar.gz"
+HTTP_CACHE_PURGE_MODULE_WD="${WORKDIR}/ngx_cache_purge-${HTTP_CACHE_PURGE_MODULE_PV}"
+
+# http_slowfs_cache (http://labs.frickle.com/nginx_ngx_slowfs_cache/, BSD-2 license)
+HTTP_SLOWFS_CACHE_MODULE_PV="1.10"
+HTTP_SLOWFS_CACHE_MODULE_P="ngx_http_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
+HTTP_SLOWFS_CACHE_MODULE_URI="http://labs.frickle.com/files/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}.tar.gz"
+HTTP_SLOWFS_CACHE_MODULE_WD="${WORKDIR}/ngx_slowfs_cache-${HTTP_SLOWFS_CACHE_MODULE_PV}"
+
+# http_fancyindex (https://github.com/aperezdc/ngx-fancyindex, BSD license)
+HTTP_FANCYINDEX_MODULE_PV="0.4.4"
+HTTP_FANCYINDEX_MODULE_P="ngx_http_fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
+HTTP_FANCYINDEX_MODULE_URI="https://github.com/aperezdc/ngx-fancyindex/archive/v${HTTP_FANCYINDEX_MODULE_PV}.tar.gz"
+HTTP_FANCYINDEX_MODULE_WD="${WORKDIR}/ngx-fancyindex-${HTTP_FANCYINDEX_MODULE_PV}"
+
+# http_lua (https://github.com/openresty/lua-nginx-module, BSD license)
+HTTP_LUA_MODULE_PV="0.10.15"
+HTTP_LUA_MODULE_P="ngx_http_lua-${HTTP_LUA_MODULE_PV}"
+HTTP_LUA_MODULE_URI="https://github.com/openresty/lua-nginx-module/archive/v${HTTP_LUA_MODULE_PV}.tar.gz"
+HTTP_LUA_MODULE_WD="${WORKDIR}/lua-nginx-module-${HTTP_LUA_MODULE_PV}"
+
+# http_auth_pam (https://github.com/stogh/ngx_http_auth_pam_module/, http://web.iti.upv.es/~sto/nginx/, BSD-2 license)
+HTTP_AUTH_PAM_MODULE_PV="1.5.2"
+HTTP_AUTH_PAM_MODULE_P="ngx_http_auth_pam-${HTTP_AUTH_PAM_MODULE_PV}"
+HTTP_AUTH_PAM_MODULE_URI="https://github.com/stogh/ngx_http_auth_pam_module/archive/v${HTTP_AUTH_PAM_MODULE_PV}.tar.gz"
+HTTP_AUTH_PAM_MODULE_WD="${WORKDIR}/ngx_http_auth_pam_module-${HTTP_AUTH_PAM_MODULE_PV}"
+
+# http_upstream_check (https://github.com/yaoweibin/nginx_upstream_check_module, BSD license)
+HTTP_UPSTREAM_CHECK_MODULE_PV="9aecf15ec379fe98f62355c57b60c0bc83296f04"
+HTTP_UPSTREAM_CHECK_MODULE_P="ngx_http_upstream_check-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
+HTTP_UPSTREAM_CHECK_MODULE_URI="https://github.com/yaoweibin/nginx_upstream_check_module/archive/${HTTP_UPSTREAM_CHECK_MODULE_PV}.tar.gz"
+HTTP_UPSTREAM_CHECK_MODULE_WD="${WORKDIR}/nginx_upstream_check_module-${HTTP_UPSTREAM_CHECK_MODULE_PV}"
+
+# http_metrics (https://github.com/zenops/ngx_metrics, BSD license)
+HTTP_METRICS_MODULE_PV="0.1.1"
+HTTP_METRICS_MODULE_P="ngx_metrics-${HTTP_METRICS_MODULE_PV}"
+HTTP_METRICS_MODULE_URI="https://github.com/madvertise/ngx_metrics/archive/v${HTTP_METRICS_MODULE_PV}.tar.gz"
+HTTP_METRICS_MODULE_WD="${WORKDIR}/ngx_metrics-${HTTP_METRICS_MODULE_PV}"
+
+# http_vhost_traffic_status (https://github.com/vozlt/nginx-module-vts, BSD license)
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV="46d85558e344dfe2b078ce757fd36c69a1ec2dd3"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_P="ngx_http_vhost_traffic_status-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI="https://github.com/vozlt/nginx-module-vts/archive/${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}.tar.gz"
+HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD="${WORKDIR}/nginx-module-vts-${HTTP_VHOST_TRAFFIC_STATUS_MODULE_PV}"
+
+# naxsi-core (https://github.com/nbs-system/naxsi, GPLv2+)
+HTTP_NAXSI_MODULE_PV="0.56"
+HTTP_NAXSI_MODULE_P="ngx_http_naxsi-${HTTP_NAXSI_MODULE_PV}"
+HTTP_NAXSI_MODULE_URI="https://github.com/nbs-system/naxsi/archive/${HTTP_NAXSI_MODULE_PV}.tar.gz"
+HTTP_NAXSI_MODULE_WD="${WORKDIR}/naxsi-${HTTP_NAXSI_MODULE_PV}/naxsi_src"
+
+# nginx-rtmp-module (https://github.com/arut/nginx-rtmp-module, BSD license)
+RTMP_MODULE_PV="1.2.1"
+RTMP_MODULE_P="ngx_rtmp-${RTMP_MODULE_PV}"
+RTMP_MODULE_URI="https://github.com/arut/nginx-rtmp-module/archive/v${RTMP_MODULE_PV}.tar.gz"
+RTMP_MODULE_WD="${WORKDIR}/nginx-rtmp-module-${RTMP_MODULE_PV}"
+
+# nginx-dav-ext-module (https://github.com/arut/nginx-dav-ext-module, BSD license)
+HTTP_DAV_EXT_MODULE_PV="3.0.0"
+HTTP_DAV_EXT_MODULE_P="ngx_http_dav_ext-${HTTP_DAV_EXT_MODULE_PV}"
+HTTP_DAV_EXT_MODULE_URI="https://github.com/arut/nginx-dav-ext-module/archive/v${HTTP_DAV_EXT_MODULE_PV}.tar.gz"
+HTTP_DAV_EXT_MODULE_WD="${WORKDIR}/nginx-dav-ext-module-${HTTP_DAV_EXT_MODULE_PV}"
+
+# echo-nginx-module (https://github.com/openresty/echo-nginx-module, BSD license)
+HTTP_ECHO_MODULE_PV="0.62"
+HTTP_ECHO_MODULE_P="ngx_http_echo-${HTTP_ECHO_MODULE_PV}"
+HTTP_ECHO_MODULE_URI="https://github.com/openresty/echo-nginx-module/archive/v${HTTP_ECHO_MODULE_PV}.tar.gz"
+HTTP_ECHO_MODULE_WD="${WORKDIR}/echo-nginx-module-${HTTP_ECHO_MODULE_PV}"
+
+# mod_security for nginx (https://modsecurity.org/, Apache-2.0)
+# keep the MODULE_P here consistent with upstream to avoid tarball duplication
+HTTP_SECURITY_MODULE_PV="2.9.3"
+HTTP_SECURITY_MODULE_P="modsecurity-${HTTP_SECURITY_MODULE_PV}"
+HTTP_SECURITY_MODULE_URI="https://www.modsecurity.org/tarball/${HTTP_SECURITY_MODULE_PV}/${HTTP_SECURITY_MODULE_P}.tar.gz"
+HTTP_SECURITY_MODULE_WD="${WORKDIR}/${HTTP_SECURITY_MODULE_P}"
+
+# push-stream-module (http://www.nginxpushstream.com, https://github.com/wandenberg/nginx-push-stream-module, GPL-3)
+HTTP_PUSH_STREAM_MODULE_PV="0.5.4"
+HTTP_PUSH_STREAM_MODULE_P="ngx_http_push_stream-${HTTP_PUSH_STREAM_MODULE_PV}"
+HTTP_PUSH_STREAM_MODULE_URI="https://github.com/wandenberg/nginx-push-stream-module/archive/${HTTP_PUSH_STREAM_MODULE_PV}.tar.gz"
+HTTP_PUSH_STREAM_MODULE_WD="${WORKDIR}/nginx-push-stream-module-${HTTP_PUSH_STREAM_MODULE_PV}"
+
+# sticky-module (https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng, BSD-2)
+HTTP_STICKY_MODULE_PV="1.2.6-10-g08a395c66e42"
+HTTP_STICKY_MODULE_P="nginx_http_sticky_module_ng-${HTTP_STICKY_MODULE_PV}"
+HTTP_STICKY_MODULE_URI="https://bitbucket.org/nginx-goodies/nginx-sticky-module-ng/get/${HTTP_STICKY_MODULE_PV}.tar.bz2"
+HTTP_STICKY_MODULE_WD="${WORKDIR}/nginx-goodies-nginx-sticky-module-ng-08a395c66e42"
+
+# mogilefs-module (https://github.com/vkholodkov/nginx-mogilefs-module, BSD-2)
+HTTP_MOGILEFS_MODULE_PV="1.0.4"
+HTTP_MOGILEFS_MODULE_P="ngx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
+HTTP_MOGILEFS_MODULE_URI="https://github.com/vkholodkov/nginx-mogilefs-module/archive/${HTTP_MOGILEFS_MODULE_PV}.tar.gz"
+HTTP_MOGILEFS_MODULE_WD="${WORKDIR}/nginx_mogilefs_module-${HTTP_MOGILEFS_MODULE_PV}"
+
+# memc-module (https://github.com/openresty/memc-nginx-module, BSD-2)
+HTTP_MEMC_MODULE_PV="0.19"
+HTTP_MEMC_MODULE_P="ngx_memc_module-${HTTP_MEMC_MODULE_PV}"
+HTTP_MEMC_MODULE_URI="https://github.com/openresty/memc-nginx-module/archive/v${HTTP_MEMC_MODULE_PV}.tar.gz"
+HTTP_MEMC_MODULE_WD="${WORKDIR}/memc-nginx-module-${HTTP_MEMC_MODULE_PV}"
+
+# nginx-ldap-auth-module (https://github.com/kvspb/nginx-auth-ldap, BSD-2)
+HTTP_LDAP_MODULE_PV="42d195d7a7575ebab1c369ad3fc5d78dc2c2669c"
+HTTP_LDAP_MODULE_P="nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
+HTTP_LDAP_MODULE_URI="https://github.com/kvspb/nginx-auth-ldap/archive/${HTTP_LDAP_MODULE_PV}.tar.gz"
+HTTP_LDAP_MODULE_WD="${WORKDIR}/nginx-auth-ldap-${HTTP_LDAP_MODULE_PV}"
+
+# geoip2 (https://github.com/leev/ngx_http_geoip2_module, BSD-2)
+GEOIP2_MODULE_PV="3.3"
+GEOIP2_MODULE_P="ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
+GEOIP2_MODULE_URI="https://github.com/leev/ngx_http_geoip2_module/archive/${GEOIP2_MODULE_PV}.tar.gz"
+GEOIP2_MODULE_WD="${WORKDIR}/ngx_http_geoip2_module-${GEOIP2_MODULE_PV}"
+
+# njs-module (https://github.com/nginx/njs, as-is)
+NJS_MODULE_PV="0.5.0"
+NJS_MODULE_P="njs-${NJS_MODULE_PV}"
+NJS_MODULE_URI="https://github.com/nginx/njs/archive/${NJS_MODULE_PV}.tar.gz"
+NJS_MODULE_WD="${WORKDIR}/njs-${NJS_MODULE_PV}"
+
+HTTP_XSLTPROC_MODULE_PV="0.17"
+HTTP_XSLTPROC_MODULE_P="ngx_xsltproc-${HTTP_XSLTPROC_MODULE_PV}"
+HTTP_XSLTPROC_MODULE_URI="https://github.com/yoreek/nginx-xsltproc-module/archive/v${HTTP_XSLTPROC_MODULE_PV}.tar.gz"
+HTTP_XSLTPROC_MODULE_WD="${WORKDIR}/nginx-xsltproc-module-${HTTP_XSLTPROC_MODULE_PV}"
+
+# We handle deps below ourselves
+SSL_DEPS_SKIP=1
+AUTOTOOLS_AUTO_DEPEND="no"
+
+inherit autotools ssl-cert toolchain-funcs perl-module flag-o-matic user systemd versionator multilib pax-utils
+
+DESCRIPTION="Robust, small and high performance http and reverse proxy server"
+HOMEPAGE="https://nginx.org"
+SRC_URI="https://nginx.org/download/${P}.tar.gz
+	${DEVEL_KIT_MODULE_URI} -> ${DEVEL_KIT_MODULE_P}.tar.gz
+	nginx_modules_http_auth_ldap? ( ${HTTP_LDAP_MODULE_URI} -> ${HTTP_LDAP_MODULE_P}.tar.gz )
+	nginx_modules_http_auth_pam? ( ${HTTP_AUTH_PAM_MODULE_URI} -> ${HTTP_AUTH_PAM_MODULE_P}.tar.gz )
+	nginx_modules_http_brotli? ( ${HTTP_BROTLI_MODULE_URI} -> ${HTTP_BROTLI_MODULE_P}.tar.gz )
+	nginx_modules_http_cache_purge? ( ${HTTP_CACHE_PURGE_MODULE_URI} -> ${HTTP_CACHE_PURGE_MODULE_P}.tar.gz )
+	nginx_modules_http_dav_ext? ( ${HTTP_DAV_EXT_MODULE_URI} -> ${HTTP_DAV_EXT_MODULE_P}.tar.gz )
+	nginx_modules_http_echo? ( ${HTTP_ECHO_MODULE_URI} -> ${HTTP_ECHO_MODULE_P}.tar.gz )
+	nginx_modules_http_fancyindex? ( ${HTTP_FANCYINDEX_MODULE_URI} -> ${HTTP_FANCYINDEX_MODULE_P}.tar.gz )
+	nginx_modules_http_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
+	nginx_modules_http_headers_more? ( ${HTTP_HEADERS_MORE_MODULE_URI} -> ${HTTP_HEADERS_MORE_MODULE_P}.tar.gz )
+	nginx_modules_http_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
+	nginx_modules_http_lua? ( ${HTTP_LUA_MODULE_URI} -> ${HTTP_LUA_MODULE_P}.tar.gz )
+	nginx_modules_http_memc? ( ${HTTP_MEMC_MODULE_URI} -> ${HTTP_MEMC_MODULE_P}.tar.gz )
+	nginx_modules_http_metrics? ( ${HTTP_METRICS_MODULE_URI} -> ${HTTP_METRICS_MODULE_P}.tar.gz )
+	nginx_modules_http_mogilefs? ( ${HTTP_MOGILEFS_MODULE_URI} -> ${HTTP_MOGILEFS_MODULE_P}.tar.gz )
+	nginx_modules_http_naxsi? ( ${HTTP_NAXSI_MODULE_URI} -> ${HTTP_NAXSI_MODULE_P}.tar.gz )
+	nginx_modules_http_push_stream? ( ${HTTP_PUSH_STREAM_MODULE_URI} -> ${HTTP_PUSH_STREAM_MODULE_P}.tar.gz )
+	nginx_modules_http_security? ( ${HTTP_SECURITY_MODULE_URI} -> ${HTTP_SECURITY_MODULE_P}.tar.gz )
+	nginx_modules_http_slowfs_cache? ( ${HTTP_SLOWFS_CACHE_MODULE_URI} -> ${HTTP_SLOWFS_CACHE_MODULE_P}.tar.gz )
+	nginx_modules_http_sticky? ( ${HTTP_STICKY_MODULE_URI} -> ${HTTP_STICKY_MODULE_P}.tar.bz2 )
+	nginx_modules_http_upload_progress? ( ${HTTP_UPLOAD_PROGRESS_MODULE_URI} -> ${HTTP_UPLOAD_PROGRESS_MODULE_P}.tar.gz )
+	nginx_modules_http_upstream_check? ( ${HTTP_UPSTREAM_CHECK_MODULE_URI} -> ${HTTP_UPSTREAM_CHECK_MODULE_P}.tar.gz )
+	nginx_modules_http_vhost_traffic_status? ( ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_URI} -> ${HTTP_VHOST_TRAFFIC_STATUS_MODULE_P}.tar.gz )
+	nginx_modules_stream_geoip2? ( ${GEOIP2_MODULE_URI} -> ${GEOIP2_MODULE_P}.tar.gz )
+	nginx_modules_stream_javascript? ( ${NJS_MODULE_URI} -> ${NJS_MODULE_P}.tar.gz )
+	rtmp? ( ${RTMP_MODULE_URI} -> ${RTMP_MODULE_P}.tar.gz )
+	nginx_modules_http_xsltproc? ( ${HTTP_XSLTPROC_MODULE_URI} -> ${HTTP_XSLTPROC_MODULE_P}.tar.gz )"
+
+LICENSE="BSD-2 BSD SSLeay MIT GPL-2 GPL-2+
+	nginx_modules_http_security? ( Apache-2.0 )
+	nginx_modules_http_push_stream? ( GPL-3 )"
+
+SLOT="mainline"
+KEYWORDS="~amd64 ~arm ~arm64 ~ppc ~ppc64 ~x86 ~amd64-linux ~x86-linux"
+
+# Package doesn't provide a real test suite
+RESTRICT="test"
+
+NGINX_MODULES_STD="access auth_basic autoindex browser charset empty_gif
+	fastcgi geo grpc gzip limit_req limit_conn map memcached mirror
+	proxy referer rewrite scgi ssi split_clients upstream_hash
+	upstream_ip_hash upstream_keepalive upstream_least_conn
+	upstream_zone userid uwsgi"
+NGINX_MODULES_OPT="addition auth_request dav degradation flv geoip gunzip
+	gzip_static image_filter mp4 perl random_index realip secure_link
+	slice stub_status sub xslt"
+NGINX_MODULES_STREAM_STD="access geo limit_conn map return split_clients
+	upstream_hash upstream_least_conn upstream_zone"
+NGINX_MODULES_STREAM_OPT="geoip realip ssl_preread"
+NGINX_MODULES_MAIL="imap pop3 smtp"
+NGINX_MODULES_3RD="
+	http_auth_ldap
+	http_auth_pam
+	http_brotli
+	http_cache_purge
+	http_dav_ext
+	http_echo
+	http_fancyindex
+	http_geoip2
+	http_headers_more
+	http_javascript
+	http_lua
+	http_memc
+	http_metrics
+	http_mogilefs
+	http_naxsi
+	http_push_stream
+	http_security
+	http_slowfs_cache
+	http_sticky
+	http_upload_progress
+	http_upstream_check
+	http_vhost_traffic_status
+	stream_geoip2
+	stream_javascript
+	http_xsltproc
+"
+
+IUSE="aio debug +http +http2 +http-cache +ipv6 libatomic libressl luajit +pcre
+	pcre-jit rtmp selinux ssl threads userland_GNU vim-syntax +nginx_modules_http_xsltproc xsltproc-memcached"
+
+for mod in $NGINX_MODULES_STD; do
+	IUSE="${IUSE} +nginx_modules_http_${mod}"
+done
+
+for mod in $NGINX_MODULES_OPT; do
+	IUSE="${IUSE} nginx_modules_http_${mod}"
+done
+
+for mod in $NGINX_MODULES_STREAM_STD; do
+	IUSE="${IUSE} nginx_modules_stream_${mod}"
+done
+
+for mod in $NGINX_MODULES_STREAM_OPT; do
+	IUSE="${IUSE} nginx_modules_stream_${mod}"
+done
+
+for mod in $NGINX_MODULES_MAIL; do
+	IUSE="${IUSE} nginx_modules_mail_${mod}"
+done
+
+for mod in $NGINX_MODULES_3RD; do
+	IUSE="${IUSE} nginx_modules_${mod}"
+done
+
+# Add so we can warn users updating about config changes
+# @TODO: jbergstroem: remove on next release series
+IUSE="${IUSE} nginx_modules_http_spdy"
+
+CDEPEND="
+	pcre? ( dev-libs/libpcre:= )
+	pcre-jit? ( dev-libs/libpcre:=[jit] )
+	ssl? (
+		!libressl? ( dev-libs/openssl:0= )
+		libressl? ( dev-libs/libressl:= )
+	)
+	http2? (
+		!libressl? ( >=dev-libs/openssl-1.0.1c:0= )
+		libressl? ( dev-libs/libressl:= )
+	)
+	http-cache? (
+		userland_GNU? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+		)
+	)
+	nginx_modules_http_brotli? ( app-arch/brotli:= )
+	nginx_modules_http_geoip? ( dev-libs/geoip )
+	nginx_modules_http_geoip2? ( dev-libs/libmaxminddb:= )
+	nginx_modules_http_gunzip? ( sys-libs/zlib )
+	nginx_modules_http_gzip? ( sys-libs/zlib )
+	nginx_modules_http_gzip_static? ( sys-libs/zlib )
+	nginx_modules_http_image_filter? ( media-libs/gd:=[jpeg,png] )
+	nginx_modules_http_perl? ( >=dev-lang/perl-5.8:= )
+	nginx_modules_http_rewrite? ( dev-libs/libpcre:= )
+	nginx_modules_http_secure_link? (
+		userland_GNU? (
+			!libressl? ( dev-libs/openssl:0= )
+			libressl? ( dev-libs/libressl:= )
+		)
+	)
+	nginx_modules_http_xslt? ( dev-libs/libxml2:= dev-libs/libxslt )
+	nginx_modules_http_lua? ( dev-lang/luajit:2= )
+	nginx_modules_http_auth_pam? ( sys-libs/pam )
+	nginx_modules_http_metrics? ( dev-libs/yajl:= )
+	nginx_modules_http_dav_ext? ( dev-libs/libxml2 )
+	nginx_modules_http_security? (
+		dev-libs/apr:=
+		dev-libs/apr-util:=
+		dev-libs/libxml2:=
+		net-misc/curl
+		www-servers/apache
+	)
+	nginx_modules_http_auth_ldap? ( net-nds/openldap[ssl?] )
+	nginx_modules_stream_geoip? ( dev-libs/geoip )
+	nginx_modules_stream_geoip2? ( dev-libs/libmaxminddb:= )
+	nginx_modules_http_xsltproc? ( dev-libs/libxml2 dev-libs/libxslt dev-libs/icu )
+	xsltproc-memcached? ( dev-libs/libmemcached )"
+RDEPEND="${CDEPEND}
+	selinux? ( sec-policy/selinux-nginx )
+	!www-servers/nginx:0"
+DEPEND="${CDEPEND}
+	nginx_modules_http_brotli? ( virtual/pkgconfig )
+	nginx_modules_http_security? ( ${AUTOTOOLS_DEPEND} )
+	arm? ( dev-libs/libatomic_ops )
+	libatomic? ( dev-libs/libatomic_ops )"
+PDEPEND="vim-syntax? ( app-vim/nginx-syntax )"
+
+REQUIRED_USE="pcre-jit? ( pcre )
+	nginx_modules_http_fancyindex? ( nginx_modules_http_addition )
+	nginx_modules_http_grpc? ( http2 )
+	nginx_modules_http_lua? (
+		luajit
+		nginx_modules_http_rewrite
+	)
+	nginx_modules_http_naxsi? ( pcre )
+	nginx_modules_http_dav_ext? ( nginx_modules_http_dav nginx_modules_http_xslt )
+	nginx_modules_http_metrics? ( nginx_modules_http_stub_status )
+	nginx_modules_http_security? ( pcre )
+	nginx_modules_http_push_stream? ( ssl )
+	xsltproc-memcached? ( nginx_modules_http_xsltproc )"
+
+pkg_setup() {
+	NGINX_HOME="/var/lib/nginx"
+	NGINX_HOME_TMP="${NGINX_HOME}/tmp"
+
+	ebegin "Creating nginx user and group"
+	enewgroup ${PN}
+	enewuser ${PN} -1 -1 "${NGINX_HOME}" ${PN}
+	eend $?
+
+	if use libatomic; then
+		ewarn "GCC 4.1+ features built-in atomic operations."
+		ewarn "Using libatomic_ops is only needed if using"
+		ewarn "a different compiler or a GCC prior to 4.1"
+	fi
+
+	if [[ -n $NGINX_ADD_MODULES ]]; then
+		ewarn "You are building custom modules via \$NGINX_ADD_MODULES!"
+		ewarn "This nginx installation is not supported!"
+		ewarn "Make sure you can reproduce the bug without those modules"
+		ewarn "_before_ reporting bugs."
+	fi
+
+	if use !http; then
+		ewarn "To actually disable all http-functionality you also have to disable"
+		ewarn "all nginx http modules."
+	fi
+
+	if use nginx_modules_http_mogilefs && use threads; then
+		eerror "mogilefs won't compile with threads support."
+		eerror "Please disable either flag and try again."
+		die "Can't compile mogilefs with threads support"
+	fi
+}
+
+src_prepare() {
+	eapply "${FILESDIR}/${PN}-1.4.1-fix-perl-install-path.patch"
+	eapply "${FILESDIR}/${PN}-httpoxy-mitigation-r1.patch"
+
+	if use nginx_modules_http_brotli; then
+		cd "${HTTP_BROTLI_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_brotli-detect-brotli-r3.patch
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		eapply -p0 "${FILESDIR}"/http_upstream_check-nginx-1.11.5+.patch
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		cd "${HTTP_CACHE_PURGE_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_cache_purge-1.11.6+.patch
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_security; then
+		cd "${HTTP_SECURITY_MODULE_WD}" || die
+
+		eautoreconf
+
+		if use luajit ; then
+			sed -i \
+				-e 's|^\(LUA_PKGNAMES\)=.*|\1="luajit"|' \
+				configure || die
+		fi
+
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_upload_progress; then
+		cd "${HTTP_UPLOAD_PROGRESS_MODULE_WD}" || die
+		eapply "${FILESDIR}"/http_uploadprogress-issue_50-r1.patch
+		cd "${S}" || die
+	fi
+
+	find auto/ -type f -print0 | xargs -0 sed -i 's:\&\& make:\&\& \\$(MAKE):' || die
+	# We have config protection, don't rename etc files
+	sed -i 's:.default::' auto/install || die
+	# remove useless files
+	sed -i -e '/koi-/d' -e '/win-/d' auto/install || die
+
+	# don't install to /etc/nginx/ if not in use
+	local module
+	for module in fastcgi scgi uwsgi ; do
+		if ! use nginx_modules_http_${module}; then
+			sed -i -e "/${module}/d" auto/install || die
+		fi
+	done
+
+	if use xsltproc-memcached; then
+		sed -i -e 's/LIBMEMCACHED_ENABLED=no/LIBMEMCACHED_ENABLED=yes/' "${HTTP_XSLTPROC_MODULE_WD}/config" || die
+	fi
+
+	eapply_user
+}
+
+src_configure() {
+	# mod_security needs to generate nginx/modsecurity/config before including it
+	if use nginx_modules_http_security; then
+		cd "${HTTP_SECURITY_MODULE_WD}" || die
+
+		./configure \
+			--enable-standalone-module \
+			--disable-mlogc \
+			--with-ssdeep=no \
+			$(use_enable pcre-jit) \
+			$(use_with nginx_modules_http_lua lua) || die "configure failed for mod_security"
+
+		cd "${S}" || die
+	fi
+
+	local myconf=() http_enabled= mail_enabled= stream_enabled=
+
+	use aio       && myconf+=( --with-file-aio )
+	use debug     && myconf+=( --with-debug )
+	use http2     && myconf+=( --with-http_v2_module )
+	use libatomic && myconf+=( --with-libatomic )
+	use pcre      && myconf+=( --with-pcre )
+	use pcre-jit  && myconf+=( --with-pcre-jit )
+	use threads   && myconf+=( --with-threads )
+
+	# HTTP modules
+	for mod in $NGINX_MODULES_STD; do
+		if use nginx_modules_http_${mod}; then
+			http_enabled=1
+		else
+			myconf+=( --without-http_${mod}_module )
+		fi
+	done
+
+	for mod in $NGINX_MODULES_OPT; do
+		if use nginx_modules_http_${mod}; then
+			http_enabled=1
+			myconf+=( --with-http_${mod}_module )
+		fi
+	done
+
+	if use nginx_modules_http_fastcgi; then
+		myconf+=( --with-http_realip_module )
+	fi
+
+	# third-party modules
+	if use nginx_modules_http_upload_progress; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_UPLOAD_PROGRESS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_headers_more; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_HEADERS_MORE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_CACHE_PURGE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_slowfs_cache; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_SLOWFS_CACHE_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_fancyindex; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_FANCYINDEX_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_lua; then
+		http_enabled=1
+		export LUAJIT_LIB=$(pkg-config --variable libdir luajit)
+		export LUAJIT_INC=$(pkg-config --variable includedir luajit)
+		myconf+=( --add-module=${DEVEL_KIT_MODULE_WD} )
+		myconf+=( --add-module=${HTTP_LUA_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_auth_pam; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_AUTH_PAM_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_UPSTREAM_CHECK_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_metrics; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_METRICS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_naxsi ; then
+		http_enabled=1
+		myconf+=(  --add-module=${HTTP_NAXSI_MODULE_WD} )
+	fi
+
+	if use rtmp ; then
+		http_enabled=1
+		myconf+=( --add-module=${RTMP_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_dav_ext ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_DAV_EXT_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_echo ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_ECHO_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_security ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_SECURITY_MODULE_WD}/nginx/modsecurity )
+	fi
+
+	if use nginx_modules_http_push_stream ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_PUSH_STREAM_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_sticky ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_STICKY_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_mogilefs ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_MOGILEFS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_memc ; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_MEMC_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_auth_ldap; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_LDAP_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_vhost_traffic_status; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_VHOST_TRAFFIC_STATUS_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_geoip2 || use nginx_modules_stream_geoip2; then
+		myconf+=( --add-module=${GEOIP2_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_javascript || use nginx_modules_stream_javascript; then
+		myconf+=( --add-module="${NJS_MODULE_WD}/nginx" )
+	fi
+
+	if use nginx_modules_http_brotli; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_BROTLI_MODULE_WD} )
+	fi
+
+	if use nginx_modules_http_xsltproc; then
+		http_enabled=1
+		myconf+=( --add-module=${HTTP_XSLTPROC_MODULE_WD} )
+	fi
+
+	if use http || use http-cache || use http2 || use nginx_modules_http_javascript; then
+		http_enabled=1
+	fi
+
+	if [ $http_enabled ]; then
+		use http-cache || myconf+=( --without-http-cache )
+		use ssl && myconf+=( --with-http_ssl_module )
+	else
+		myconf+=( --without-http --without-http-cache )
+	fi
+
+	# Stream modules
+	for mod in $NGINX_MODULES_STREAM_STD; do
+		if use nginx_modules_stream_${mod}; then
+			stream_enabled=1
+		else
+			myconf+=( --without-stream_${mod}_module )
+		fi
+	done
+
+	for mod in $NGINX_MODULES_STREAM_OPT; do
+		if use nginx_modules_stream_${mod}; then
+			stream_enabled=1
+			myconf+=( --with-stream_${mod}_module )
+		fi
+	done
+
+	if use nginx_modules_stream_geoip2 || use nginx_modules_stream_javascript; then
+		stream_enabled=1
+	fi
+
+	if [ $stream_enabled ]; then
+		myconf+=( --with-stream )
+		use ssl && myconf+=( --with-stream_ssl_module )
+	fi
+
+	# MAIL modules
+	for mod in $NGINX_MODULES_MAIL; do
+		if use nginx_modules_mail_${mod}; then
+			mail_enabled=1
+		else
+			myconf+=( --without-mail_${mod}_module )
+		fi
+	done
+
+	if [ $mail_enabled ]; then
+		myconf+=( --with-mail )
+		use ssl && myconf+=( --with-mail_ssl_module )
+	fi
+
+	# custom modules
+	for mod in $NGINX_ADD_MODULES; do
+		myconf+=(  --add-module=${mod} )
+	done
+
+	# https://bugs.gentoo.org/286772
+	export LANG=C LC_ALL=C
+	tc-export AR CC
+
+	if ! use prefix; then
+		myconf+=( --user=${PN} )
+		myconf+=( --group=${PN} )
+	fi
+
+	local WITHOUT_IPV6=
+	if ! use ipv6; then
+		WITHOUT_IPV6=" -DNGX_HAVE_INET6=0"
+	fi
+
+	if [[ -n "${EXTRA_ECONF}" ]]; then
+		myconf+=( ${EXTRA_ECONF} )
+		ewarn "EXTRA_ECONF applied. Now you are on your own, good luck!"
+	fi
+
+	./configure \
+		--prefix="${EPREFIX}"/usr \
+		--conf-path="${EPREFIX}"/etc/${PN}/${PN}.conf \
+		--error-log-path="${EPREFIX}"/var/log/${PN}/error_log \
+		--pid-path="${EPREFIX}"/run/${PN}.pid \
+		--lock-path="${EPREFIX}"/run/lock/${PN}.lock \
+		--with-cc-opt="-I${EROOT}usr/include${WITHOUT_IPV6}" \
+		--with-ld-opt="-L${EROOT}usr/$(get_libdir)" \
+		--http-log-path="${EPREFIX}"/var/log/${PN}/access_log \
+		--http-client-body-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/client \
+		--http-proxy-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/proxy \
+		--http-fastcgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/fastcgi \
+		--http-scgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/scgi \
+		--http-uwsgi-temp-path="${EPREFIX}${NGINX_HOME_TMP}"/uwsgi \
+		--with-compat \
+		"${myconf[@]}" || die "configure failed"
+
+	# A purely cosmetic change that makes nginx -V more readable. This can be
+	# good if people outside the gentoo community would troubleshoot and
+	# question the users setup.
+	sed -i -e "s|${WORKDIR}|external_module|g" objs/ngx_auto_config.h || die
+}
+
+src_compile() {
+	use nginx_modules_http_security && emake -C "${HTTP_SECURITY_MODULE_WD}"
+
+	# https://bugs.gentoo.org/286772
+	export LANG=C LC_ALL=C
+	emake LINK="${CC} ${LDFLAGS}" OTHERLDFLAGS="${LDFLAGS}"
+}
+
+src_install() {
+	emake DESTDIR="${D%/}" install
+
+	cp "${FILESDIR}"/nginx.conf-r2 "${ED%/}"/etc/nginx/nginx.conf || die
+
+	newinitd "${FILESDIR}"/nginx.initd-r4 nginx
+	newconfd "${FILESDIR}"/nginx.confd nginx
+
+	systemd_newunit "${FILESDIR}"/nginx.service-r1 nginx.service
+
+	doman man/nginx.8
+	dodoc CHANGES* README
+
+	# just keepdir. do not copy the default htdocs files (bug #449136)
+	keepdir /var/www/localhost
+	rm -rf "${ED%/}"/usr/html || die
+
+	# set up a list of directories to keep
+	local keepdir_list="${NGINX_HOME_TMP}"/client
+	local module
+	for module in proxy fastcgi scgi uwsgi; do
+		use nginx_modules_http_${module} && keepdir_list+=" ${NGINX_HOME_TMP}/${module}"
+	done
+
+	keepdir /var/log/nginx ${keepdir_list}
+
+	# this solves a problem with SELinux where nginx doesn't see the directories
+	# as root and tries to create them as nginx
+	fperms 0750 "${NGINX_HOME_TMP}"
+	fowners ${PN}:0 "${NGINX_HOME_TMP}"
+
+	fperms 0700 ${keepdir_list}
+	fowners ${PN}:${PN} ${keepdir_list}
+
+	fperms 0710 /var/log/nginx
+	fowners 0:${PN} /var/log/nginx
+
+	# logrotate
+	insinto /etc/logrotate.d
+	newins "${FILESDIR}"/nginx.logrotate-r1 nginx
+
+	# Don't create /run
+	rm -rf "${ED%/}"/run || die
+
+	if use luajit; then
+		pax-mark m "${ED%/}/usr/sbin/nginx"
+	fi
+
+	if use nginx_modules_http_perl; then
+		cd "${S}"/objs/src/http/modules/perl/ || die
+		emake DESTDIR="${D}" INSTALLDIRS=vendor
+		perl_delete_localpod
+		cd "${S}" || die
+	fi
+
+	if use nginx_modules_http_cache_purge; then
+		docinto ${HTTP_CACHE_PURGE_MODULE_P}
+		dodoc "${HTTP_CACHE_PURGE_MODULE_WD}"/{CHANGES,README.md,TODO.md}
+	fi
+
+	if use nginx_modules_http_slowfs_cache; then
+		docinto ${HTTP_SLOWFS_CACHE_MODULE_P}
+		dodoc "${HTTP_SLOWFS_CACHE_MODULE_WD}"/{CHANGES,README.md}
+	fi
+
+	if use nginx_modules_http_fancyindex; then
+		docinto ${HTTP_FANCYINDEX_MODULE_P}
+		dodoc "${HTTP_FANCYINDEX_MODULE_WD}"/README.rst
+	fi
+
+	if use nginx_modules_http_lua; then
+		docinto ${HTTP_LUA_MODULE_P}
+		dodoc "${HTTP_LUA_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_auth_pam; then
+		docinto ${HTTP_AUTH_PAM_MODULE_P}
+		dodoc "${HTTP_AUTH_PAM_MODULE_WD}"/{README.md,ChangeLog}
+	fi
+
+	if use nginx_modules_http_upstream_check; then
+		docinto ${HTTP_UPSTREAM_CHECK_MODULE_P}
+		dodoc "${HTTP_UPSTREAM_CHECK_MODULE_WD}"/{README,CHANGES}
+	fi
+
+	if use nginx_modules_http_naxsi; then
+		insinto /etc/nginx
+		doins "${HTTP_NAXSI_MODULE_WD}"/../naxsi_config/naxsi_core.rules
+	fi
+
+	if use rtmp; then
+		docinto ${RTMP_MODULE_P}
+		dodoc "${RTMP_MODULE_WD}"/{AUTHORS,README.md,stat.xsl}
+	fi
+
+	if use nginx_modules_http_dav_ext; then
+		docinto ${HTTP_DAV_EXT_MODULE_P}
+		dodoc "${HTTP_DAV_EXT_MODULE_WD}"/README.rst
+	fi
+
+	if use nginx_modules_http_echo; then
+		docinto ${HTTP_ECHO_MODULE_P}
+		dodoc "${HTTP_ECHO_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_security; then
+		docinto ${HTTP_SECURITY_MODULE_P}
+		dodoc "${HTTP_SECURITY_MODULE_WD}"/{CHANGES,README.md,authors.txt}
+	fi
+
+	if use nginx_modules_http_push_stream; then
+		docinto ${HTTP_PUSH_STREAM_MODULE_P}
+		dodoc "${HTTP_PUSH_STREAM_MODULE_WD}"/{AUTHORS,CHANGELOG.textile,README.textile}
+	fi
+
+	if use nginx_modules_http_sticky; then
+		docinto ${HTTP_STICKY_MODULE_P}
+		dodoc "${HTTP_STICKY_MODULE_WD}"/{README.md,Changelog.txt,docs/sticky.pdf}
+	fi
+
+	if use nginx_modules_http_memc; then
+		docinto ${HTTP_MEMC_MODULE_P}
+		dodoc "${HTTP_MEMC_MODULE_WD}"/README.markdown
+	fi
+
+	if use nginx_modules_http_auth_ldap; then
+		docinto ${HTTP_LDAP_MODULE_P}
+		dodoc "${HTTP_LDAP_MODULE_WD}"/example.conf
+	fi
+}
+
+pkg_postinst() {
+	if use ssl; then
+		if [[ ! -f "${EROOT}"etc/ssl/${PN}/${PN}.key ]]; then
+			install_cert /etc/ssl/${PN}/${PN}
+			use prefix || chown ${PN}:${PN} "${EROOT}"etc/ssl/${PN}/${PN}.{crt,csr,key,pem}
+		fi
+	fi
+
+	if use nginx_modules_http_spdy; then
+		ewarn ""
+		ewarn "In nginx 1.9.5 the spdy module was superseded by http2."
+		ewarn "Update your configs and package.use accordingly."
+	fi
+
+	if use nginx_modules_http_lua; then
+		ewarn ""
+		ewarn "While you can build lua 3rd party module against ${P}"
+		ewarn "the author warns that >=${PN}-1.11.11 is still not an"
+		ewarn "officially supported target yet. You are on your own."
+		ewarn "Expect runtime failures, memory leaks and other problems!"
+	fi
+
+	if use nginx_modules_http_lua && use http2; then
+		ewarn ""
+		ewarn "Lua 3rd party module author warns against using ${P} with"
+		ewarn "NGINX_MODULES_HTTP=\"lua http2\". For more info, see https://git.io/OldLsg"
+	fi
+
+	local _n_permission_layout_checks=0
+	local _has_to_adjust_permissions=0
+	local _has_to_show_permission_warning=0
+
+	# Defaults to 1 to inform people doing a fresh installation
+	# that we ship modified {scgi,uwsgi,fastcgi}_params files
+	local _has_to_show_httpoxy_mitigation_notice=1
+
+	local _replacing_version=
+	for _replacing_version in ${REPLACING_VERSIONS}; do
+		_n_permission_layout_checks=$((${_n_permission_layout_checks}+1))
+
+		if [[ ${_n_permission_layout_checks} -gt 1 ]]; then
+			# Should never happen:
+			# Package is abusing slots but doesn't allow multiple parallel installations.
+			# If we run into this situation it is unsafe to automatically adjust any
+			# permission...
+			_has_to_show_permission_warning=1
+
+			ewarn "Replacing multiple ${PN}' versions is unsupported! " \
+				"You will have to adjust permissions on your own."
+
+			break
+		fi
+
+		local _replacing_version_branch=$(get_version_component_range 1-2 "${_replacing_version}")
+		debug-print "Updating an existing installation (v${_replacing_version}; branch '${_replacing_version_branch}') ..."
+
+		# Do we need to adjust permissions to fix CVE-2013-0337 (bug #458726, #469094)?
+		# This was before we introduced multiple nginx versions so we
+		# do not need to distinguish between stable and mainline
+		local _need_to_fix_CVE2013_0337=1
+
+		if version_is_at_least "1.4.1-r2" "${_replacing_version}"; then
+			# We are updating an installation which should already be fixed
+			_need_to_fix_CVE2013_0337=0
+			debug-print "Skipping CVE-2013-0337 ... existing installation should not be affected!"
+		else
+			_has_to_adjust_permissions=1
+			debug-print "Need to adjust permissions to fix CVE-2013-0337!"
+		fi
+
+		# Do we need to inform about HTTPoxy mitigation?
+		# In repository since commit 8be44f76d4ac02cebcd1e0e6e6284bb72d054b0f
+		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
+			# Updating from <1.10
+			_has_to_show_httpoxy_mitigation_notice=1
+			debug-print "Need to inform about HTTPoxy mitigation!"
+		else
+			# Updating from >=1.10
+			local _fixed_in_pvr=
+			case "${_replacing_version_branch}" in
+				"1.10")
+					_fixed_in_pvr="1.10.1-r2"
+					;;
+				"1.11")
+					_fixed_in_pvr="1.11.3-r1"
+					;;
+				*)
+					# This should be any future branch.
+					# If we run this code it is safe to assume that the user has
+					# already seen the HTTPoxy mitigation notice because he/she is doing
+					# an update from previous version where we have already shown
+					# the warning. Otherwise, we wouldn't hit this code path ...
+					_fixed_in_pvr=
+			esac
+
+			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
+				# We are updating an installation where we already informed
+				# that we are mitigating HTTPoxy per default
+				_has_to_show_httpoxy_mitigation_notice=0
+				debug-print "No need to inform about HTTPoxy mitigation ... information was already shown for existing installation!"
+			else
+				_has_to_show_httpoxy_mitigation_notice=1
+				debug-print "Need to inform about HTTPoxy mitigation!"
+			fi
+		fi
+
+		# Do we need to adjust permissions to fix CVE-2016-1247 (bug #605008)?
+		# All branches up to 1.11 are affected
+		local _need_to_fix_CVE2016_1247=1
+
+		if ! version_is_at_least "1.10" "${_replacing_version_branch}"; then
+			# Updating from <1.10
+			_has_to_adjust_permissions=1
+			debug-print "Need to adjust permissions to fix CVE-2016-1247!"
+		else
+			# Updating from >=1.10
+			local _fixed_in_pvr=
+			case "${_replacing_version_branch}" in
+				"1.10")
+					_fixed_in_pvr="1.10.2-r3"
+					;;
+				"1.11")
+					_fixed_in_pvr="1.11.6-r1"
+					;;
+				*)
+					# This should be any future branch.
+					# If we run this code it is safe to assume that we have already
+					# adjusted permissions or were never affected because user is
+					# doing an update from previous version which was safe or did
+					# the adjustments. Otherwise, we wouldn't hit this code path ...
+					_fixed_in_pvr=
+			esac
+
+			if [[ -z "${_fixed_in_pvr}" ]] || version_is_at_least "${_fixed_in_pvr}" "${_replacing_version}"; then
+				# We are updating an installation which should already be adjusted
+				# or which was never affected
+				_need_to_fix_CVE2016_1247=0
+				debug-print "Skipping CVE-2016-1247 ... existing installation should not be affected!"
+			else
+				_has_to_adjust_permissions=1
+				debug-print "Need to adjust permissions to fix CVE-2016-1247!"
+			fi
+		fi
+	done
+
+	if [[ ${_has_to_adjust_permissions} -eq 1 ]]; then
+		# We do not DIE when chmod/chown commands are failing because
+		# package is already merged on user's system at this stage
+		# and we cannot retry without losing the information that
+		# the existing installation needs to adjust permissions.
+		# Instead we are going to a show a big warning ...
+
+		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2013_0337} -eq 1 ]]; then
+			ewarn ""
+			ewarn "The world-readable bit (if set) has been removed from the"
+			ewarn "following directories to mitigate a security bug"
+			ewarn "(CVE-2013-0337, bug #458726):"
+			ewarn ""
+			ewarn "  ${EPREFIX}/var/log/nginx"
+			ewarn "  ${EPREFIX}${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi}"
+			ewarn ""
+			ewarn "Check if this is correct for your setup before restarting nginx!"
+			ewarn "This is a one-time change and will not happen on subsequent updates."
+			ewarn "Furthermore nginx' temp directories got moved to '${EPREFIX}${NGINX_HOME_TMP}'"
+			chmod o-rwx \
+				"${EPREFIX}"/var/log/nginx \
+				"${EPREFIX}"${NGINX_HOME_TMP}/{,client,proxy,fastcgi,scgi,uwsgi} || \
+				_has_to_show_permission_warning=1
+		fi
+
+		if [[ ${_has_to_show_permission_warning} -eq 0 ]] && [[ ${_need_to_fix_CVE2016_1247} -eq 1 ]]; then
+			ewarn ""
+			ewarn "The permissions on the following directory have been reset in"
+			ewarn "order to mitigate a security bug (CVE-2016-1247, bug #605008):"
+			ewarn ""
+			ewarn "  ${EPREFIX}/var/log/nginx"
+			ewarn ""
+			ewarn "Check if this is correct for your setup before restarting nginx!"
+			ewarn "Also ensure that no other log directory used by any of your"
+			ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
+			ewarn "used by nginx can be abused to escalate privileges!"
+			ewarn "This is a one-time change and will not happen on subsequent updates."
+			chown 0:nginx "${EPREFIX}"/var/log/nginx || _has_to_show_permission_warning=1
+			chmod 710 "${EPREFIX}"/var/log/nginx || _has_to_show_permission_warning=1
+		fi
+
+		if [[ ${_has_to_show_permission_warning} -eq 1 ]]; then
+			# Should never happen ...
+			ewarn ""
+			ewarn "*************************************************************"
+			ewarn "***************         W A R N I N G         ***************"
+			ewarn "*************************************************************"
+			ewarn "The one-time only attempt to adjust permissions of the"
+			ewarn "existing nginx installation failed. Be aware that we will not"
+			ewarn "try to adjust the same permissions again because now you are"
+			ewarn "using a nginx version where we expect that the permissions"
+			ewarn "are already adjusted or that you know what you are doing and"
+			ewarn "want to keep custom permissions."
+			ewarn ""
+		fi
+	fi
+
+	# Sanity check for CVE-2016-1247
+	# Required to warn users who received the warning above and thought
+	# they could fix it by unmerging and re-merging the package or have
+	# unmerged a affected installation on purpose in the past leaving
+	# /var/log/nginx on their system due to keepdir/non-empty folder
+	# and are now installing the package again.
+	local _sanity_check_testfile=$(mktemp --dry-run "${EPREFIX}"/var/log/nginx/.CVE-2016-1247.XXXXXXXXX)
+	su -s /bin/sh -c "touch ${_sanity_check_testfile}" nginx >&/dev/null
+	if [ $? -eq 0 ] ; then
+		# Cleanup -- no reason to die here!
+		rm -f "${_sanity_check_testfile}"
+
+		ewarn ""
+		ewarn "*************************************************************"
+		ewarn "***************         W A R N I N G         ***************"
+		ewarn "*************************************************************"
+		ewarn "Looks like your installation is vulnerable to CVE-2016-1247"
+		ewarn "(bug #605008) because nginx user is able to create files in"
+		ewarn ""
+		ewarn "  ${EPREFIX}/var/log/nginx"
+		ewarn ""
+		ewarn "Also ensure that no other log directory used by any of your"
+		ewarn "vhost(s) is not writeable for nginx user. Any of your log files"
+		ewarn "used by nginx can be abused to escalate privileges!"
+	fi
+
+	if [[ ${_has_to_show_httpoxy_mitigation_notice} -eq 1 ]]; then
+		# HTTPoxy mitigation
+		ewarn ""
+		ewarn "This nginx installation comes with a mitigation for the HTTPoxy"
+		ewarn "vulnerability for FastCGI, SCGI and uWSGI applications by setting"
+		ewarn "the HTTP_PROXY parameter to an empty string per default when you"
+		ewarn "are sourcing one of the default"
+		ewarn ""
+		ewarn "  - 'fastcgi_params' or 'fastcgi.conf'"
+		ewarn "  - 'scgi_params'"
+		ewarn "  - 'uwsgi_params'"
+		ewarn ""
+		ewarn "files in your server block(s)."
+		ewarn ""
+		ewarn "If this is causing any problems for you make sure that you are sourcing the"
+		ewarn "default parameters _before_ you set your own values."
+		ewarn "If you are relying on user-supplied proxy values you have to remove the"
+		ewarn "correlating lines from the file(s) mentioned above."
+		ewarn ""
+	fi
+}
-- 
cgit v1.2.3-65-gdbad