Import gentoo-doc-doc repository

1 files changed, 155 insertions, 0 deletions

diff --git a/doc/gettext/gentoo-x86-quickinstall-media.xml.pot b/doc/gettext/gentoo-x86-quickinstall-media.xml.pot
new file mode 100644
index 0000000..e0e75b2
--- /dev/null
+++ b/doc/gettext/gentoo-x86-quickinstall-media.xml.pot
@@ -0,0 +1,155 @@
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2010-10-21 23:56+0600\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(version):7
+msgid "5"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(date):8
+msgid "2009-10-04"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(title):11
+msgid "Installation Media"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):14
+msgid "Download a CD from one of our <uri link=\"/main/en/mirrors.xml\">mirrors</uri>. You can find the minimal CD ISO in <path>releases/x86/current-iso/</path>. The <e>minimal</e> installation CD is only useful for Internet-based installations. This guide will use the minimal CD."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):21
+msgid "<uri link=\"/doc/en/faq.xml#isoburning\">Burn</uri> the CD and boot it."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(title):28
+msgid "Booting the CD"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):31
+msgid "Press <c>F2</c> at the boot screen to find out what boot options exist. You can either start <c>gentoo</c> or <c>gentoo-nofb</c>, the latter disables the framebuffer. If you booted the LiveCD, don't forget to add the <c>nox</c> option to prevent the X graphical environment from starting. Several options allow to enable or disable some features. If all goes well, your hardware will be detected and all modules will be loaded. If the kernel fails to boot properly or if your computer hangs during the boot procedure, you may have to experiment with different configurations. The safest way is probably to use the <c>nodetect</c> option and then load required modules explicitly."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):43
+msgid "Boot the minimal CD"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):43
+#, no-wrap
+msgid "\nGentoo Linux Installation LiveCD                     http://www.gentoo.org\nEnter to Boot; F1 for kernels  F2 for options.\nboot: <i>gentoo-nofb</i>\n  <comment>(or in case of problems)</comment>\nboot: <i>gentoo-nofb nodetect</i>\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(title):54
+msgid "Optional: loading modules"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):57
+msgid "If you used the <c>nodetect</c> option, once booted, load the required modules. You need to enable networking and have access to your disks. The <c>lspci</c> command can help you identify your hardware."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):63
+msgid "Load required modules"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):63
+#, no-wrap
+msgid "\nlivecd root # <i>lspci</i>\n<comment>(Use lspci's output to identify required modules)</comment>\n\n<comment>(The following is an example, adapt it to your hardware)</comment>\nlivecd root # <i>modprobe 3w-9xxx</i>\nlivecd root # <i>modprobe r8169</i>\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(title):75
+msgid "Network Configuration"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):78
+msgid "If your network does not work already, you can use <c>net-setup</c> to configure your network. You might need to load support for your network card using <c>modprobe</c> prior to the configuration. If you have ADSL, use <c>pppoe-setup</c> and <c>pppoe-start</c>. For PPTP support, first edit <path>/etc/ppp/chap-secrets</path> and <path>/etc/ppp/options.pptp</path> and then use <c>pptp &lt;server&nbsp;ip&gt;</c>."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):87
+msgid "For wireless access, use <c>iwconfig</c> to set the wireless parameters and then use either <c>net-setup</c> again or run <c>ifconfig</c>, <c>dhcpcd</c> and/or <c>route</c> manually."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):93
+msgid "If you are behind a proxy, do not forget to initialize your system using <c>export http_proxy</c>, <c>ftp_proxy</c> and <c>RSYNC_PROXY</c>."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):98
+msgid "Configure networking the guided way"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):98
+#, no-wrap
+msgid "\nlivecd root # <i>net-setup eth0</i>\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):102
+msgid "Alternatively, you can start networking manually. The following example assigns the IP address 192.168.1.10 to your PC and defines 192.168.1.1 as your router and name server."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):108
+msgid "Configure networking the manual way"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):108
+#, no-wrap
+msgid "\nlivecd root # <i>ifconfig eth0 192.168.1.10/24</i>\nlivecd root # <i>route add default gw 192.168.1.1</i>\nlivecd root # <i>echo nameserver 192.168.1.1 &gt; /etc/resolv.conf</i>\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):114
+msgid "The installation CD allows you to start an <c>sshd</c> server, add additional users, run <c>irssi</c> (a command-line chat client) and surf the web using <c>links</c>."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(title):123
+msgid "Optional: connect to your new box over ssh"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):126
+msgid "The most interesting feature is of course <c>sshd</c>. You can start it and then connect from another machine and cut and paste commands from this guide."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):131
+msgid "Start sshd"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):131
+#, no-wrap
+msgid "\nlivecd root # <i>time /etc/init.d/sshd start</i>\n * Generating hostkey ...\n<comment>(sshd generates the key and displays more output)</comment>\n * starting sshd ...                            [ok]\n\nreal   0m13.688s\nuser   0m9.420s\nsys    0m0.090s\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):142
+msgid "Now, set the root password on the liveCD so that you can connect to it from another PC. Please note that allowing root to connect over ssh is not recommended under normal circumstances. If you can't trust your local network, use a long and complex password, you should use it only once as it will disappear after your first reboot."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):150
+msgid "Set the root password"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):150
+#, no-wrap
+msgid "\nlivecd root # <i>passwd</i>\nNew UNIX password: <comment>type_a_password</comment>\nRetype new UNIX password: <comment>type_a_password</comment>\npasswd: password updated successfully\n"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(p):157
+msgid "Now, you can start a terminal on another PC and connect to your new box, follow the rest of this guide in another window, and cut and paste commands."
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre:caption):162
+msgid "Connect to your new box from another PC"
+msgstr ""
+
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(pre):162
+#, no-wrap
+msgid "\n<comment>(Use the IP address of your new box)</comment>\n$ <i>ssh root@192.168.1.10</i>\nThe authenticity of host '192.168.1.10 (192.168.1.10)' can't be established.\nRSA key fingerprint is 96:e7:2d:12:ac:9c:b0:94:90:9f:40:89:b0:45:26:8f.\nAre you sure you want to continue connecting (yes/no)? <i>yes</i>\nWarning: Permanently added '192.168.1.10' (RSA) to the list of known hosts.\nPassword: <comment>type_the_password</comment>\n"
+msgstr ""
+
+#. Place here names of translator, one per line. Format should be NAME; ROLE; E-MAIL
+#: ../../gentoo/xml/htdocs/doc/en//gentoo-x86-quickinstall-media.xml(None):0
+msgid "translator-credits"
+msgstr ""
+