diff options
Diffstat (limited to 'app-eselect/eselect-wxwidgets/files/wxwin.m4-2.9')
| -rw-r--r-- | app-eselect/eselect-wxwidgets/files/wxwin.m4-2.9 | 1063 |
1 files changed, 1063 insertions, 0 deletions
diff --git a/app-eselect/eselect-wxwidgets/files/wxwin.m4-2.9 b/app-eselect/eselect-wxwidgets/files/wxwin.m4-2.9 new file mode 100644 index 000000000000..4c01ae41bc4a --- /dev/null +++ b/app-eselect/eselect-wxwidgets/files/wxwin.m4-2.9 @@ -0,0 +1,1063 @@ +dnl --------------------------------------------------------------------------- +dnl Author: wxWidgets development team, +dnl Francesco Montorsi, +dnl Bob McCown (Mac-testing) +dnl Creation date: 24/11/2001 +dnl RCS-ID: $Id$ +dnl --------------------------------------------------------------------------- + +dnl =========================================================================== +dnl Table of Contents of this macro file: +dnl ------------------------------------- +dnl +dnl SECTION A: wxWidgets main macros +dnl - WX_CONFIG_OPTIONS +dnl - WX_CONFIG_CHECK +dnl - WXRC_CHECK +dnl - WX_STANDARD_OPTIONS +dnl - WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS +dnl - WX_DETECT_STANDARD_OPTION_VALUES +dnl +dnl SECTION B: wxWidgets-related utilities +dnl - WX_LIKE_LIBNAME +dnl - WX_ARG_ENABLE_YESNOAUTO +dnl - WX_ARG_WITH_YESNOAUTO +dnl +dnl SECTION C: messages to the user +dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG +dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN +dnl - WX_STANDARD_OPTIONS_SUMMARY_MSG_END +dnl - WX_BOOLOPT_SUMMARY +dnl +dnl The special "WX_DEBUG_CONFIGURE" variable can be set to 1 to enable extra +dnl debug output on stdout from these macros. +dnl =========================================================================== + + +dnl --------------------------------------------------------------------------- +dnl Macros for wxWidgets detection. Typically used in configure.in as: +dnl +dnl AC_ARG_ENABLE(...) +dnl AC_ARG_WITH(...) +dnl ... +dnl WX_CONFIG_OPTIONS +dnl ... +dnl ... +dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1]) +dnl if test "$wxWin" != 1; then +dnl AC_MSG_ERROR([ +dnl wxWidgets must be installed on your system +dnl but wx-config script couldn't be found. +dnl +dnl Please check that wx-config is in path, the directory +dnl where wxWidgets libraries are installed (returned by +dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or +dnl equivalent variable and wxWidgets version is 2.3.4 or above. +dnl ]) +dnl fi +dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS" +dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY" +dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY" +dnl +dnl LIBS="$LIBS $WX_LIBS" +dnl +dnl If you want to support standard --enable-debug/unicode/shared options, you +dnl may do the following: +dnl +dnl ... +dnl AC_CANONICAL_SYSTEM +dnl +dnl # define configure options +dnl WX_CONFIG_OPTIONS +dnl WX_STANDARD_OPTIONS([debug,unicode,shared,toolkit,wxshared]) +dnl +dnl # basic configure checks +dnl ... +dnl +dnl # we want to always have DEBUG==WX_DEBUG and UNICODE==WX_UNICODE +dnl WX_DEBUG=$DEBUG +dnl WX_UNICODE=$UNICODE +dnl +dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS +dnl WX_CONFIG_CHECK([2.8.0], [wxWin=1],,[html,core,net,base],[$WXCONFIG_FLAGS]) +dnl WX_DETECT_STANDARD_OPTION_VALUES +dnl +dnl # write the output files +dnl AC_CONFIG_FILES([Makefile ...]) +dnl AC_OUTPUT +dnl +dnl # optional: just to show a message to the user +dnl WX_STANDARD_OPTIONS_SUMMARY_MSG +dnl +dnl --------------------------------------------------------------------------- + + +dnl --------------------------------------------------------------------------- +dnl WX_CONFIG_OPTIONS +dnl +dnl adds support for --wx-prefix, --wx-exec-prefix, --with-wxdir and +dnl --wx-config command line options +dnl --------------------------------------------------------------------------- + +AC_DEFUN([WX_CONFIG_OPTIONS], +[ + AC_ARG_WITH(wxdir, + [ --with-wxdir=PATH Use uninstalled version of wxWidgets in PATH], + [ wx_config_name="$withval/wx-config" + wx_config_args="--inplace"]) + AC_ARG_WITH(wx-config, + [ --with-wx-config=CONFIG wx-config script to use (optional)], + wx_config_name="$withval" ) + AC_ARG_WITH(wx-prefix, + [ --with-wx-prefix=PREFIX Prefix where wxWidgets is installed (optional)], + wx_config_prefix="$withval", wx_config_prefix="") + AC_ARG_WITH(wx-exec-prefix, + [ --with-wx-exec-prefix=PREFIX + Exec prefix where wxWidgets is installed (optional)], + wx_config_exec_prefix="$withval", wx_config_exec_prefix="") +]) + +dnl Helper macro for checking if wx version is at least $1.$2.$3, set's +dnl wx_ver_ok=yes if it is: +AC_DEFUN([_WX_PRIVATE_CHECK_VERSION], +[ + wx_ver_ok="" + if test "x$WX_VERSION" != x ; then + if test $wx_config_major_version -gt $1; then + wx_ver_ok=yes + else + if test $wx_config_major_version -eq $1; then + if test $wx_config_minor_version -gt $2; then + wx_ver_ok=yes + else + if test $wx_config_minor_version -eq $2; then + if test $wx_config_micro_version -ge $3; then + wx_ver_ok=yes + fi + fi + fi + fi + fi + fi +]) + +dnl --------------------------------------------------------------------------- +dnl WX_CONFIG_CHECK(VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND +dnl [, WX-LIBS [, ADDITIONAL-WX-CONFIG-FLAGS]]]]) +dnl +dnl Test for wxWidgets, and define WX_C*FLAGS, WX_LIBS and WX_LIBS_STATIC +dnl (the latter is for static linking against wxWidgets). Set WX_CONFIG_NAME +dnl environment variable to override the default name of the wx-config script +dnl to use. Set WX_CONFIG_PATH to specify the full path to wx-config - in this +dnl case the macro won't even waste time on tests for its existence. +dnl +dnl Optional WX-LIBS argument contains comma- or space-separated list of +dnl wxWidgets libraries to link against. If it is not specified then WX_LIBS +dnl and WX_LIBS_STATIC will contain flags to link with all of the core +dnl wxWidgets libraries. +dnl +dnl Optional ADDITIONAL-WX-CONFIG-FLAGS argument is appended to wx-config +dnl invocation command in present. It can be used to fine-tune lookup of +dnl best wxWidgets build available. +dnl +dnl Example use: +dnl WX_CONFIG_CHECK([2.6.0], [wxWin=1], [wxWin=0], [html,core,net] +dnl [--unicode --debug]) +dnl --------------------------------------------------------------------------- + +dnl +dnl Get the cflags and libraries from the wx-config script +dnl +AC_DEFUN([WX_CONFIG_CHECK], +[ + dnl do we have wx-config name: it can be wx-config or wxd-config or ... + if test x${WX_CONFIG_NAME+set} != xset ; then + WX_CONFIG_NAME=wx-config + fi + + if test "x$wx_config_name" != x ; then + WX_CONFIG_NAME="$wx_config_name" + fi + + dnl deal with optional prefixes + if test x$wx_config_exec_prefix != x ; then + wx_config_args="$wx_config_args --exec-prefix=$wx_config_exec_prefix" + WX_LOOKUP_PATH="$wx_config_exec_prefix/bin" + fi + if test x$wx_config_prefix != x ; then + wx_config_args="$wx_config_args --prefix=$wx_config_prefix" + WX_LOOKUP_PATH="$WX_LOOKUP_PATH:$wx_config_prefix/bin" + fi + if test "$cross_compiling" = "yes"; then + wx_config_args="$wx_config_args --host=$host_alias" + fi + + dnl don't search the PATH if WX_CONFIG_NAME is absolute filename + if test -x "$WX_CONFIG_NAME" ; then + AC_MSG_CHECKING(for wx-config) + WX_CONFIG_PATH="$WX_CONFIG_NAME" + AC_MSG_RESULT($WX_CONFIG_PATH) + else + AC_PATH_PROG(WX_CONFIG_PATH, $WX_CONFIG_NAME, no, "$WX_LOOKUP_PATH:$PATH") + fi + + if test "$WX_CONFIG_PATH" != "no" ; then + WX_VERSION="" + + min_wx_version=ifelse([$1], ,2.2.1,$1) + if test -z "$5" ; then + AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version]) + else + AC_MSG_CHECKING([for wxWidgets version >= $min_wx_version ($5)]) + fi + + dnl don't add the libraries ($4) to this variable as this would result in + dnl an error when it's used with --version below + WX_CONFIG_WITH_ARGS="$WX_CONFIG_PATH $wx_config_args $5" + + WX_VERSION=`$WX_CONFIG_WITH_ARGS --version 2>/dev/null` + wx_config_major_version=`echo $WX_VERSION | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + wx_config_minor_version=`echo $WX_VERSION | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + wx_config_micro_version=`echo $WX_VERSION | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + + wx_requested_major_version=`echo $min_wx_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` + wx_requested_minor_version=`echo $min_wx_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` + wx_requested_micro_version=`echo $min_wx_version | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` + + _WX_PRIVATE_CHECK_VERSION([$wx_requested_major_version], + [$wx_requested_minor_version], + [$wx_requested_micro_version]) + + if test -n "$wx_ver_ok"; then + AC_MSG_RESULT(yes (version $WX_VERSION)) + WX_LIBS=`$WX_CONFIG_WITH_ARGS --libs $4` + + dnl is this even still appropriate? --static is a real option now + dnl and WX_CONFIG_WITH_ARGS is likely to contain it if that is + dnl what the user actually wants, making this redundant at best. + dnl For now keep it in case anyone actually used it in the past. + AC_MSG_CHECKING([for wxWidgets static library]) + WX_LIBS_STATIC=`$WX_CONFIG_WITH_ARGS --static --libs $4 2>/dev/null` + if test "x$WX_LIBS_STATIC" = "x"; then + AC_MSG_RESULT(no) + else + AC_MSG_RESULT(yes) + fi + + dnl starting with version 2.2.6 wx-config has --cppflags argument + wx_has_cppflags="" + if test $wx_config_major_version -gt 2; then + wx_has_cppflags=yes + else + if test $wx_config_major_version -eq 2; then + if test $wx_config_minor_version -gt 2; then + wx_has_cppflags=yes + else + if test $wx_config_minor_version -eq 2; then + if test $wx_config_micro_version -ge 6; then + wx_has_cppflags=yes + fi + fi + fi + fi + fi + + dnl starting with version 2.7.0 wx-config has --rescomp option + wx_has_rescomp="" + if test $wx_config_major_version -gt 2; then + wx_has_rescomp=yes + else + if test $wx_config_major_version -eq 2; then + if test $wx_config_minor_version -ge 7; then + wx_has_rescomp=yes + fi + fi + fi + if test "x$wx_has_rescomp" = x ; then + dnl cannot give any useful info for resource compiler + WX_RESCOMP= + else + WX_RESCOMP=`$WX_CONFIG_WITH_ARGS --rescomp` + fi + + if test "x$wx_has_cppflags" = x ; then + dnl no choice but to define all flags like CFLAGS + WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4` + WX_CPPFLAGS=$WX_CFLAGS + WX_CXXFLAGS=$WX_CFLAGS + + WX_CFLAGS_ONLY=$WX_CFLAGS + WX_CXXFLAGS_ONLY=$WX_CFLAGS + else + dnl we have CPPFLAGS included in CFLAGS included in CXXFLAGS + WX_CPPFLAGS=`$WX_CONFIG_WITH_ARGS --cppflags $4` + WX_CXXFLAGS=`$WX_CONFIG_WITH_ARGS --cxxflags $4` + WX_CFLAGS=`$WX_CONFIG_WITH_ARGS --cflags $4` + + WX_CFLAGS_ONLY=`echo $WX_CFLAGS | sed "s@^$WX_CPPFLAGS *@@"` + WX_CXXFLAGS_ONLY=`echo $WX_CXXFLAGS | sed "s@^$WX_CFLAGS *@@"` + fi + + ifelse([$2], , :, [$2]) + + else + + if test "x$WX_VERSION" = x; then + dnl no wx-config at all + AC_MSG_RESULT(no) + else + AC_MSG_RESULT(no (version $WX_VERSION is not new enough)) + fi + + WX_CFLAGS="" + WX_CPPFLAGS="" + WX_CXXFLAGS="" + WX_LIBS="" + WX_LIBS_STATIC="" + WX_RESCOMP="" + + if test ! -z "$5"; then + + wx_error_message=" + The configuration you asked for $PACKAGE_NAME requires a wxWidgets + build with the following settings: + $5 + but such build is not available. + + To see the wxWidgets builds available on this system, please use + 'wx-config --list' command. To use the default build, returned by + 'wx-config --selected-config', use the options with their 'auto' + default values." + + fi + + wx_error_message=" + The requested wxWidgets build couldn't be found. + $wx_error_message + + If you still get this error, then check that 'wx-config' is + in path, the directory where wxWidgets libraries are installed + (returned by 'wx-config --libs' command) is in LD_LIBRARY_PATH + or equivalent variable and wxWidgets version is $1 or above." + + ifelse([$3], , AC_MSG_ERROR([$wx_error_message]), [$3]) + + fi + else + + WX_CFLAGS="" + WX_CPPFLAGS="" + WX_CXXFLAGS="" + WX_LIBS="" + WX_LIBS_STATIC="" + WX_RESCOMP="" + + ifelse([$3], , :, [$3]) + + fi + + AC_SUBST(WX_CPPFLAGS) + AC_SUBST(WX_CFLAGS) + AC_SUBST(WX_CXXFLAGS) + AC_SUBST(WX_CFLAGS_ONLY) + AC_SUBST(WX_CXXFLAGS_ONLY) + AC_SUBST(WX_LIBS) + AC_SUBST(WX_LIBS_STATIC) + AC_SUBST(WX_VERSION) + AC_SUBST(WX_RESCOMP) + + dnl need to export also WX_VERSION_MINOR and WX_VERSION_MAJOR symbols + dnl to support wxpresets bakefiles (we export also WX_VERSION_MICRO for completeness): + WX_VERSION_MAJOR="$wx_config_major_version" + WX_VERSION_MINOR="$wx_config_minor_version" + WX_VERSION_MICRO="$wx_config_micro_version" + AC_SUBST(WX_VERSION_MAJOR) + AC_SUBST(WX_VERSION_MINOR) + AC_SUBST(WX_VERSION_MICRO) +]) + +dnl --------------------------------------------------------------------------- +dnl Get information on the wxrc program for making C++, Python and xrs +dnl resource files. +dnl +dnl AC_ARG_ENABLE(...) +dnl AC_ARG_WITH(...) +dnl ... +dnl WX_CONFIG_OPTIONS +dnl ... +dnl WX_CONFIG_CHECK(2.6.0, wxWin=1) +dnl if test "$wxWin" != 1; then +dnl AC_MSG_ERROR([ +dnl wxWidgets must be installed on your system +dnl but wx-config script couldn't be found. +dnl +dnl Please check that wx-config is in path, the directory +dnl where wxWidgets libraries are installed (returned by +dnl 'wx-config --libs' command) is in LD_LIBRARY_PATH or +dnl equivalent variable and wxWidgets version is 2.6.0 or above. +dnl ]) +dnl fi +dnl +dnl WXRC_CHECK([HAVE_WXRC=1], [HAVE_WXRC=0]) +dnl if test "x$HAVE_WXRC" != x1; then +dnl AC_MSG_ERROR([ +dnl The wxrc program was not installed or not found. +dnl +dnl Please check the wxWidgets installation. +dnl ]) +dnl fi +dnl +dnl CPPFLAGS="$CPPFLAGS $WX_CPPFLAGS" +dnl CXXFLAGS="$CXXFLAGS $WX_CXXFLAGS_ONLY" +dnl CFLAGS="$CFLAGS $WX_CFLAGS_ONLY" +dnl +dnl LDFLAGS="$LDFLAGS $WX_LIBS" +dnl --------------------------------------------------------------------------- + +dnl --------------------------------------------------------------------------- +dnl WXRC_CHECK([ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) +dnl +dnl Test for wxWidgets' wxrc program for creating either C++, Python or XRS +dnl resources. The variable WXRC will be set and substituted in the configure +dnl script and Makefiles. +dnl +dnl Example use: +dnl WXRC_CHECK([wxrc=1], [wxrc=0]) +dnl --------------------------------------------------------------------------- + +dnl +dnl wxrc program from the wx-config script +dnl +AC_DEFUN([WXRC_CHECK], +[ + AC_ARG_VAR([WXRC], [Path to wxWidget's wxrc resource compiler]) + + if test "x$WX_CONFIG_NAME" = x; then + AC_MSG_ERROR([The wxrc tests must run after wxWidgets test.]) + else + + AC_MSG_CHECKING([for wxrc]) + + if test "x$WXRC" = x ; then + dnl wx-config --utility is a new addition to wxWidgets: + _WX_PRIVATE_CHECK_VERSION(2,5,3) + if test -n "$wx_ver_ok"; then + WXRC=`$WX_CONFIG_WITH_ARGS --utility=wxrc` + fi + fi + + if test "x$WXRC" = x ; then + AC_MSG_RESULT([not found]) + ifelse([$2], , :, [$2]) + else + AC_MSG_RESULT([$WXRC]) + ifelse([$1], , :, [$1]) + fi + + AC_SUBST(WXRC) + fi +]) + +dnl --------------------------------------------------------------------------- +dnl WX_LIKE_LIBNAME([output-var] [prefix], [name]) +dnl +dnl Sets the "output-var" variable to the name of a library named with same +dnl wxWidgets rule. +dnl E.g. for output-var=='lib', name=='test', prefix='mine', sets +dnl the $lib variable to: +dnl 'mine_gtk2ud_test-2.8' +dnl if WX_PORT=gtk2, WX_UNICODE=1, WX_DEBUG=1 and WX_RELEASE=28 +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_LIKE_LIBNAME], + [ + wx_temp="$2""_""$WX_PORT" + + dnl add the [u][d] string + if test "$WX_UNICODE" = "1"; then + wx_temp="$wx_temp""u" + fi + if test "$WX_DEBUG" = "1"; then + wx_temp="$wx_temp""d" + fi + + dnl complete the name of the lib + wx_temp="$wx_temp""_""$3""-$WX_VERSION_MAJOR.$WX_VERSION_MINOR" + + dnl save it in the user's variable + $1=$wx_temp + ]) + +dnl --------------------------------------------------------------------------- +dnl WX_ARG_ENABLE_YESNOAUTO/WX_ARG_WITH_YESNOAUTO +dnl +dnl Two little custom macros which define the ENABLE/WITH configure arguments. +dnl Macro arguments: +dnl $1 = the name of the --enable / --with feature +dnl $2 = the name of the variable associated +dnl $3 = the description of that feature +dnl $4 = the default value for that feature +dnl $5 = additional action to do in case option is given with "yes" value +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_ARG_ENABLE_YESNOAUTO], + [AC_ARG_ENABLE($1, + AC_HELP_STRING([--enable-$1], [$3 (default is $4)]), + [], [enableval="$4"]) + + dnl Show a message to the user about this option + AC_MSG_CHECKING([for the --enable-$1 option]) + if test "$enableval" = "yes" ; then + AC_MSG_RESULT([yes]) + $2=1 + $5 + elif test "$enableval" = "no" ; then + AC_MSG_RESULT([no]) + $2=0 + elif test "$enableval" = "auto" ; then + AC_MSG_RESULT([will be automatically detected]) + $2="auto" + else + AC_MSG_ERROR([ + Unrecognized option value (allowed values: yes, no, auto) + ]) + fi + ]) + +AC_DEFUN([WX_ARG_WITH_YESNOAUTO], + [AC_ARG_WITH($1, + AC_HELP_STRING([--with-$1], [$3 (default is $4)]), + [], [withval="$4"]) + + dnl Show a message to the user about this option + AC_MSG_CHECKING([for the --with-$1 option]) + if test "$withval" = "yes" ; then + AC_MSG_RESULT([yes]) + $2=1 + $5 + dnl NB: by default we don't allow --with-$1=no option + dnl since it does not make much sense ! + elif test "$6" = "1" -a "$withval" = "no" ; then + AC_MSG_RESULT([no]) + $2=0 + elif test "$withval" = "auto" ; then + AC_MSG_RESULT([will be automatically detected]) + $2="auto" + else + AC_MSG_ERROR([ + Unrecognized option value (allowed values: yes, auto) + ]) + fi + ]) + + +dnl --------------------------------------------------------------------------- +dnl WX_STANDARD_OPTIONS([options-to-add]) +dnl +dnl Adds to the configure script one or more of the following options: +dnl --enable-[debug|unicode|shared|wxshared|wxdebug] +dnl --with-[gtk|msw|motif|x11|mac|mgl|dfb] +dnl --with-wxversion +dnl Then checks for their presence and eventually set the DEBUG, UNICODE, SHARED, +dnl PORT, WX_SHARED, WX_DEBUG, variables to one of the "yes", "no", "auto" values. +dnl +dnl Note that e.g. UNICODE != WX_UNICODE; the first is the value of the +dnl --enable-unicode option (in boolean format) while the second indicates +dnl if wxWidgets was built in Unicode mode (and still is in boolean format). +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_STANDARD_OPTIONS], + [ + + dnl the following lines will expand to WX_ARG_ENABLE_YESNOAUTO calls if and only if + dnl the $1 argument contains respectively the debug,unicode or shared options. + + dnl be careful here not to set debug flag if only "wxdebug" was specified + ifelse(regexp([$1], [\bdebug]), [-1],, + [WX_ARG_ENABLE_YESNOAUTO([debug], [DEBUG], [Build in debug mode], [auto])]) + + ifelse(index([$1], [unicode]), [-1],, + [WX_ARG_ENABLE_YESNOAUTO([unicode], [UNICODE], [Build in Unicode mode], [auto])]) + + ifelse(regexp([$1], [\bshared]), [-1],, + [WX_ARG_ENABLE_YESNOAUTO([shared], [SHARED], [Build as shared library], [auto])]) + + dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-toolkit since it's an option + dnl which must be able to accept the auto|gtk1|gtk2|msw|... values + ifelse(index([$1], [toolkit]), [-1],, + [ + AC_ARG_WITH([toolkit], + AC_HELP_STRING([--with-toolkit], + [Build against a specific wxWidgets toolkit (default is auto)]), + [], [withval="auto"]) + + dnl Show a message to the user about this option + AC_MSG_CHECKING([for the --with-toolkit option]) + if test "$withval" = "auto" ; then + AC_MSG_RESULT([will be automatically detected]) + TOOLKIT="auto" + else + TOOLKIT="$withval" + + dnl PORT must be one of the allowed values + if test "$TOOLKIT" != "gtk1" -a "$TOOLKIT" != "gtk2" -a \ + "$TOOLKIT" != "msw" -a "$TOOLKIT" != "motif" -a \ + "$TOOLKIT" != "x11" -a "$TOOLKIT" != "mac" -a \ + "$TOOLKIT" != "mgl" -a "$TOOLKIT" != "dfb" ; then + AC_MSG_ERROR([ + Unrecognized option value (allowed values: auto, gtk1, gtk2, msw, motif, x11, mac, mgl, dfb) + ]) + fi + + AC_MSG_RESULT([$TOOLKIT]) + fi + ]) + + dnl ****** IMPORTANT ******* + dnl Unlike for the UNICODE setting, you can build your program in + dnl shared mode against a static build of wxWidgets. Thus we have the + dnl following option which allows these mixtures. E.g. + dnl + dnl ./configure --disable-shared --with-wxshared + dnl + dnl will build your library in static mode against the first available + dnl shared build of wxWidgets. + dnl + dnl Note that's not possible to do the viceversa: + dnl + dnl ./configure --enable-shared --without-wxshared + dnl + dnl Doing so you would try to build your library in shared mode against a static + dnl build of wxWidgets. This is not possible (you would mix PIC and non PIC code) ! + dnl A check for this combination of options is in WX_DETECT_STANDARD_OPTION_VALUES + dnl (where we know what 'auto' should be expanded to). + dnl + dnl If you try to build something in ANSI mode against a UNICODE build + dnl of wxWidgets or in RELEASE mode against a DEBUG build of wxWidgets, + dnl then at best you'll get ton of linking errors ! + dnl ************************ + + ifelse(index([$1], [wxshared]), [-1],, + [ + WX_ARG_WITH_YESNOAUTO( + [wxshared], [WX_SHARED], + [Force building against a shared build of wxWidgets, even if --disable-shared is given], + [auto], [], [1]) + ]) + + dnl Just like for SHARED and WX_SHARED it may happen that some adventurous + dnl peoples will want to mix a wxWidgets release build with a debug build of + dnl his app/lib. So, we have both DEBUG and WX_DEBUG variables. + ifelse(index([$1], [wxdebug]), [-1],, + [ + WX_ARG_WITH_YESNOAUTO( + [wxdebug], [WX_DEBUG], + [Force building against a debug build of wxWidgets, even if --disable-debug is given], + [auto], [], [1]) + ]) + + dnl WX_ARG_WITH_YESNOAUTO cannot be used for --with-wxversion since it's an option + dnl which accepts the "auto|2.6|2.7|2.8|2.9|3.0" etc etc values + ifelse(index([$1], [wxversion]), [-1],, + [ + AC_ARG_WITH([wxversion], + AC_HELP_STRING([--with-wxversion], + [Build against a specific version of wxWidgets (default is auto)]), + [], [withval="auto"]) + + dnl Show a message to the user about this option + AC_MSG_CHECKING([for the --with-wxversion option]) + if test "$withval" = "auto" ; then + AC_MSG_RESULT([will be automatically detected]) + WX_RELEASE="auto" + else + + wx_requested_major_version=`echo $withval | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\1/'` + wx_requested_minor_version=`echo $withval | \ + sed 's/\([[0-9]]*\).\([[0-9]]*\).*/\2/'` + + dnl both vars above must be exactly 1 digit + if test "${#wx_requested_major_version}" != "1" -o \ + "${#wx_requested_minor_version}" != "1" ; then + AC_MSG_ERROR([ + Unrecognized option value (allowed values: auto, 2.6, 2.7, 2.8, 2.9, 3.0) + ]) + fi + + WX_RELEASE="$wx_requested_major_version"".""$wx_requested_minor_version" + AC_MSG_RESULT([$WX_RELEASE]) + fi + ]) + + if test "$WX_DEBUG_CONFIGURE" = "1"; then + echo "[[dbg]] DEBUG: $DEBUG, WX_DEBUG: $WX_DEBUG" + echo "[[dbg]] UNICODE: $UNICODE, WX_UNICODE: $WX_UNICODE" + echo "[[dbg]] SHARED: $SHARED, WX_SHARED: $WX_SHARED" + echo "[[dbg]] TOOLKIT: $TOOLKIT, WX_TOOLKIT: $WX_TOOLKIT" + echo "[[dbg]] VERSION: $VERSION, WX_RELEASE: $WX_RELEASE" + fi + ]) + + +dnl --------------------------------------------------------------------------- +dnl WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS +dnl +dnl Sets the WXCONFIG_FLAGS string using the SHARED,DEBUG,UNICODE variable values +dnl which are different from "auto". +dnl Thus this macro needs to be called only once all options have been set. +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_CONVERT_STANDARD_OPTIONS_TO_WXCONFIG_FLAGS], + [ + if test "$WX_SHARED" = "1" ; then + WXCONFIG_FLAGS="--static=no " + elif test "$WX_SHARED" = "0" ; then + WXCONFIG_FLAGS="--static=yes " + fi + + if test "$WX_DEBUG" = "1" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=yes " + elif test "$WX_DEBUG" = "0" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--debug=no " + fi + + dnl The user should have set WX_UNICODE=UNICODE + if test "$WX_UNICODE" = "1" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=yes " + elif test "$WX_UNICODE" = "0" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--unicode=no " + fi + + if test "$TOOLKIT" != "auto" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--toolkit=$TOOLKIT " + fi + + if test "$WX_RELEASE" != "auto" ; then + WXCONFIG_FLAGS="$WXCONFIG_FLAGS""--version=$WX_RELEASE " + fi + + dnl strip out the last space of the string + WXCONFIG_FLAGS=${WXCONFIG_FLAGS% } + + if test "$WX_DEBUG_CONFIGURE" = "1"; then + echo "[[dbg]] WXCONFIG_FLAGS: $WXCONFIG_FLAGS" + fi + ]) + + +dnl --------------------------------------------------------------------------- +dnl _WX_SELECTEDCONFIG_CHECKFOR([RESULTVAR], [STRING], [MSG] +dnl [, ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]) +dnl +dnl Outputs the given MSG. Then searches the given STRING in the wxWidgets +dnl additional CPP flags and put the result of the search in WX_$RESULTVAR +dnl also adding the "yes" or "no" message result to MSG. +dnl --------------------------------------------------------------------------- +AC_DEFUN([_WX_SELECTEDCONFIG_CHECKFOR], + [ + if test "$$1" = "auto" ; then + + dnl The user does not have particular preferences for this option; + dnl so we will detect the wxWidgets relative build setting and use it + AC_MSG_CHECKING([$3]) + + dnl set WX_$1 variable to 1 if the $WX_SELECTEDCONFIG contains the $2 + dnl string or to 0 otherwise. + dnl NOTE: 'expr match STRING REGEXP' cannot be used since on Mac it + dnl doesn't work; we use 'expr STRING : REGEXP' instead + WX_$1=$(expr "$WX_SELECTEDCONFIG" : ".*$2.*") + + if test "$WX_$1" != "0"; then + WX_$1=1 + AC_MSG_RESULT([yes]) + ifelse([$4], , :, [$4]) + else + WX_$1=0 + AC_MSG_RESULT([no]) + ifelse([$5], , :, [$5]) + fi + else + + dnl Use the setting given by the user + WX_$1=$$1 + fi + ]) + +dnl --------------------------------------------------------------------------- +dnl WX_DETECT_STANDARD_OPTION_VALUES +dnl +dnl Detects the values of the following variables: +dnl 1) WX_RELEASE +dnl 2) WX_UNICODE +dnl 3) WX_DEBUG +dnl 4) WX_SHARED (and also WX_STATIC) +dnl 5) WX_PORT +dnl from the previously selected wxWidgets build; this macro in fact must be +dnl called *after* calling the WX_CONFIG_CHECK macro. +dnl +dnl Note that the WX_VERSION_MAJOR, WX_VERSION_MINOR symbols are already set +dnl by WX_CONFIG_CHECK macro +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_DETECT_STANDARD_OPTION_VALUES], + [ + dnl IMPORTANT: WX_VERSION contains all three major.minor.micro digits, + dnl while WX_RELEASE only the major.minor ones. + WX_RELEASE="$WX_VERSION_MAJOR""$WX_VERSION_MINOR" + if test $WX_RELEASE -lt 26 ; then + + AC_MSG_ERROR([ + Cannot detect the wxWidgets configuration for the selected wxWidgets build + since its version is $WX_VERSION < 2.6.0; please install a newer + version of wxWidgets. + ]) + fi + + dnl The wx-config we are using understands the "--selected_config" + dnl option which returns an easy-parseable string ! + WX_SELECTEDCONFIG=$($WX_CONFIG_WITH_ARGS --selected_config) + + if test "$WX_DEBUG_CONFIGURE" = "1"; then + echo "[[dbg]] Using wx-config --selected-config" + echo "[[dbg]] WX_SELECTEDCONFIG: $WX_SELECTEDCONFIG" + fi + + + dnl we could test directly for WX_SHARED with a line like: + dnl _WX_SELECTEDCONFIG_CHECKFOR([SHARED], [shared], + dnl [if wxWidgets was built in SHARED mode]) + dnl but wx-config --selected-config DOES NOT outputs the 'shared' + dnl word when wx was built in shared mode; it rather outputs the + dnl 'static' word when built in static mode. + if test $WX_SHARED = "1"; then + STATIC=0 + elif test $WX_SHARED = "0"; then + STATIC=1 + elif test $WX_SHARED = "auto"; then + STATIC="auto" + fi + + dnl Now set the WX_UNICODE, WX_DEBUG, WX_STATIC variables + _WX_SELECTEDCONFIG_CHECKFOR([UNICODE], [unicode], + [if wxWidgets was built with UNICODE enabled]) + _WX_SELECTEDCONFIG_CHECKFOR([DEBUG], [debug], + [if wxWidgets was built in DEBUG mode]) + _WX_SELECTEDCONFIG_CHECKFOR([STATIC], [static], + [if wxWidgets was built in STATIC mode]) + + dnl init WX_SHARED from WX_STATIC + if test "$WX_STATIC" != "0"; then + WX_SHARED=0 + else + WX_SHARED=1 + fi + + AC_SUBST(WX_UNICODE) + AC_SUBST(WX_DEBUG) + AC_SUBST(WX_SHARED) + + dnl detect the WX_PORT to use + if test "$TOOLKIT" = "auto" ; then + + dnl The user does not have particular preferences for this option; + dnl so we will detect the wxWidgets relative build setting and use it + AC_MSG_CHECKING([which wxWidgets toolkit was selected]) + + WX_GTKPORT1=$(expr "$WX_SELECTEDCONFIG" : ".*gtk1.*") + WX_GTKPORT2=$(expr "$WX_SELECTEDCONFIG" : ".*gtk2.*") + WX_MSWPORT=$(expr "$WX_SELECTEDCONFIG" : ".*msw.*") + WX_MOTIFPORT=$(expr "$WX_SELECTEDCONFIG" : ".*motif.*") + WX_OSXCOCOAPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_cocoa.*") + WX_OSXCARBONPORT=$(expr "$WX_SELECTEDCONFIG" : ".*osx_carbon.*") + WX_X11PORT=$(expr "$WX_SELECTEDCONFIG" : ".*x11.*") + WX_MGLPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mgl.*") + WX_DFBPORT=$(expr "$WX_SELECTEDCONFIG" : ".*dfb.*") + + WX_PORT="unknown" + if test "$WX_GTKPORT1" != "0"; then WX_PORT="gtk1"; fi + if test "$WX_GTKPORT2" != "0"; then WX_PORT="gtk2"; fi + if test "$WX_MSWPORT" != "0"; then WX_PORT="msw"; fi + if test "$WX_MOTIFPORT" != "0"; then WX_PORT="motif"; fi + if test "$WX_OSXCOCOAPORT" != "0"; then WX_PORT="osx_cocoa"; fi + if test "$WX_OSXCARBONPORT" != "0"; then WX_PORT="osx_carbon"; fi + if test "$WX_X11PORT" != "0"; then WX_PORT="x11"; fi + if test "$WX_MGLPORT" != "0"; then WX_PORT="mgl"; fi + if test "$WX_DFBPORT" != "0"; then WX_PORT="dfb"; fi + + dnl NOTE: backward-compatible check for wx2.8; in wx2.9 the mac + dnl ports are called 'osx_cocoa' and 'osx_carbon' (see above) + WX_MACPORT=$(expr "$WX_SELECTEDCONFIG" : ".*mac.*") + if test "$WX_MACPORT" != "0"; then WX_PORT="mac"; fi + + dnl check at least one of the WX_*PORT has been set ! + + if test "$WX_PORT" = "unknown" ; then + AC_MSG_ERROR([ + Cannot detect the currently installed wxWidgets port ! + Please check your 'wx-config --cxxflags'... + ]) + fi + + AC_MSG_RESULT([$WX_PORT]) + else + + dnl Use the setting given by the user + if test -z "$TOOLKIT" ; then + WX_PORT=$TOOLKIT + else + dnl try with PORT + WX_PORT=$PORT + fi + fi + + AC_SUBST(WX_PORT) + + if test "$WX_DEBUG_CONFIGURE" = "1"; then + echo "[[dbg]] Values of all WX_* options after final detection:" + echo "[[dbg]] WX_DEBUG: $WX_DEBUG" + echo "[[dbg]] WX_UNICODE: $WX_UNICODE" + echo "[[dbg]] WX_SHARED: $WX_SHARED" + echo "[[dbg]] WX_RELEASE: $WX_RELEASE" + echo "[[dbg]] WX_PORT: $WX_PORT" + fi + + dnl Avoid problem described in the WX_STANDARD_OPTIONS which happens when + dnl the user gives the options: + dnl ./configure --enable-shared --without-wxshared + dnl or just do + dnl ./configure --enable-shared + dnl but there is only a static build of wxWidgets available. + if test "$WX_SHARED" = "0" -a "$SHARED" = "1"; then + AC_MSG_ERROR([ + Cannot build shared library against a static build of wxWidgets ! + This error happens because the wxWidgets build which was selected + has been detected as static while you asked to build $PACKAGE_NAME + as shared library and this is not possible. + Use the '--disable-shared' option to build $PACKAGE_NAME + as static library or '--with-wxshared' to use wxWidgets as shared library. + ]) + fi + + dnl now we can finally update the DEBUG,UNICODE,SHARED options + dnl to their final values if they were set to 'auto' + if test "$DEBUG" = "auto"; then + DEBUG=$WX_DEBUG + fi + if test "$UNICODE" = "auto"; then + UNICODE=$WX_UNICODE + fi + if test "$SHARED" = "auto"; then + SHARED=$WX_SHARED + fi + if test "$TOOLKIT" = "auto"; then + TOOLKIT=$WX_PORT + fi + + dnl in case the user needs a BUILD=debug/release var... + if test "$DEBUG" = "1"; then + BUILD="debug" + elif test "$DEBUG" = "0" -o "$DEBUG" = ""; then + BUILD="release" + fi + + dnl respect the DEBUG variable adding the optimize/debug flags + dnl NOTE: the CXXFLAGS are merged together with the CPPFLAGS so we + dnl don't need to set them, too + if test "$DEBUG" = "1"; then + CXXFLAGS="$CXXFLAGS -g -O0" + CFLAGS="$CFLAGS -g -O0" + else + CXXFLAGS="$CXXFLAGS -O2" + CFLAGS="$CFLAGS -O2" + fi + ]) + +dnl --------------------------------------------------------------------------- +dnl WX_BOOLOPT_SUMMARY([name of the boolean variable to show summary for], +dnl [what to print when var is 1], +dnl [what to print when var is 0]) +dnl +dnl Prints $2 when variable $1 == 1 and prints $3 when variable $1 == 0. +dnl This macro mainly exists just to make configure.ac scripts more readable. +dnl +dnl NOTE: you need to use the [" my message"] syntax for 2nd and 3rd arguments +dnl if you want that m4 avoid to throw away the spaces prefixed to the +dnl argument value. +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_BOOLOPT_SUMMARY], + [ + if test "x$$1" = "x1" ; then + echo $2 + elif test "x$$1" = "x0" ; then + echo $3 + else + echo "$1 is $$1" + fi + ]) + +dnl --------------------------------------------------------------------------- +dnl WX_STANDARD_OPTIONS_SUMMARY_MSG +dnl +dnl Shows a summary message to the user about the WX_* variable contents. +dnl This macro is used typically at the end of the configure script. +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG], + [ + echo + echo " The wxWidgets build which will be used by $PACKAGE_NAME $PACKAGE_VERSION" + echo " has the following settings:" + WX_BOOLOPT_SUMMARY([WX_DEBUG], [" - DEBUG build"], [" - RELEASE build"]) + WX_BOOLOPT_SUMMARY([WX_UNICODE], [" - UNICODE mode"], [" - ANSI mode"]) + WX_BOOLOPT_SUMMARY([WX_SHARED], [" - SHARED mode"], [" - STATIC mode"]) + echo " - VERSION: $WX_VERSION" + echo " - PORT: $WX_PORT" + ]) + + +dnl --------------------------------------------------------------------------- +dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN, WX_STANDARD_OPTIONS_SUMMARY_MSG_END +dnl +dnl Like WX_STANDARD_OPTIONS_SUMMARY_MSG macro but these two macros also gives info +dnl about the configuration of the package which used the wxpresets. +dnl +dnl Typical usage: +dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN +dnl echo " - Package setting 1: $SETTING1" +dnl echo " - Package setting 2: $SETTING1" +dnl ... +dnl WX_STANDARD_OPTIONS_SUMMARY_MSG_END +dnl +dnl --------------------------------------------------------------------------- +AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_BEGIN], + [ + echo + echo " ----------------------------------------------------------------" + echo " Configuration for $PACKAGE_NAME $PACKAGE_VERSION successfully completed." + echo " Summary of main configuration settings for $PACKAGE_NAME:" + WX_BOOLOPT_SUMMARY([DEBUG], [" - DEBUG build"], [" - RELEASE build"]) + WX_BOOLOPT_SUMMARY([UNICODE], [" - UNICODE mode"], [" - ANSI mode"]) + WX_BOOLOPT_SUMMARY([SHARED], [" - SHARED mode"], [" - STATIC mode"]) + ]) + +AC_DEFUN([WX_STANDARD_OPTIONS_SUMMARY_MSG_END], + [ + WX_STANDARD_OPTIONS_SUMMARY_MSG + echo + echo " Now, just run make." + echo " ----------------------------------------------------------------" + echo + ]) + + +dnl --------------------------------------------------------------------------- +dnl Deprecated macro wrappers +dnl --------------------------------------------------------------------------- + +AC_DEFUN([AM_OPTIONS_WXCONFIG], [WX_CONFIG_OPTIONS]) +AC_DEFUN([AM_PATH_WXCONFIG], [ + WX_CONFIG_CHECK([$1],[$2],[$3],[$4],[$5]) +]) + + |