7 files changed, 63 insertions, 271 deletions
diff --git a/net-vpn/headscale/files/config-socket.patch b/net-vpn/headscale/files/config-socket.patch
new file mode 100644
index 000000000000..4d6c90e3f0f5
--- /dev/null
+++ b/net-vpn/headscale/files/config-socket.patch
@@ -0,0 +1,13 @@
+diff --git a/config-example.yaml b/config-example.yaml
+index dee25cb..007d8ec 100644
+--- a/config-example.yaml
++++ b/config-example.yaml
+@@ -202,7 +202,7 @@ dns_config:
+ # Unix socket used for the CLI to connect without authentication
+ # Note: for local development, you probably want to change this to:
+ # unix_socket: ./headscale.sock
+-unix_socket: /var/run/headscale.sock
++unix_socket: /run/headscale.sock
+ unix_socket_permission: "0770"
+ #
+ # headscale supports experimental OpenID connect support,
diff --git a/net-vpn/headscale/files/config.yaml.example b/net-vpn/headscale/files/config.yaml.example
deleted file mode 100644
index 603b941dac9d..000000000000
--- a/net-vpn/headscale/files/config.yaml.example
+++ /dev/null
@@ -1,221 +0,0 @@
----
-# headscale will look for a configuration file named `config.yaml` (or `config.json`) in the following order:
-#
-# - `/etc/headscale`
-# - `~/.headscale`
-# - current working directory
-
-# The url clients will connect to.
-# Typically this will be a domain like:
-#
-# https://myheadscale.example.com:443
-#
-server_url: http://127.0.0.1:8080
-
-# Address to listen to / bind to on the server
-#
-listen_addr: 0.0.0.0:8080
-
-# Address to listen to /metrics, you may want
-# to keep this endpoint private to your internal
-# network
-#
-metrics_listen_addr: 127.0.0.1:9090
-
-# Address to listen for gRPC.
-# gRPC is used for controlling a headscale server
-# remotely with the CLI
-# Note: Remote access _only_ works if you have
-# valid certificates.
-grpc_listen_addr: 0.0.0.0:50443
-
-# Allow the gRPC admin interface to run in INSECURE
-# mode. This is not recommended as the traffic will
-# be unencrypted. Only enable if you know what you
-# are doing.
-grpc_allow_insecure: false
-
-# Private key used encrypt the traffic between headscale
-# and Tailscale clients.
-# The private key file which will be
-# autogenerated if it's missing
-private_key_path: /var/lib/headscale/private.key
-
-# List of IP prefixes to allocate tailaddresses from.
-# Each prefix consists of either an IPv4 or IPv6 address,
-# and the associated prefix length, delimited by a slash.
-ip_prefixes:
-  - fd7a:115c:a1e0::/48
-  - 100.64.0.0/10
-
-# DERP is a relay system that Tailscale uses when a direct
-# connection cannot be established.
-# https://tailscale.com/blog/how-tailscale-works/#encrypted-tcp-relays-derp
-#
-# headscale needs a list of DERP servers that can be presented
-# to the clients.
-derp:
-  server:
-    # If enabled, runs the embedded DERP server and merges it into the rest of the DERP config
-    # The Headscale server_url defined above MUST be using https, DERP requires TLS to be in place
-    enabled: false
-
-    # Region ID to use for the embedded DERP server.
-    # The local DERP prevails if the region ID collides with other region ID coming from
-    # the regular DERP config.
-    region_id: 999
-
-    # Region code and name are displayed in the Tailscale UI to identify a DERP region
-    region_code: "headscale"
-    region_name: "Headscale Embedded DERP"
-
-    # Listens in UDP at the configured address for STUN connections to help on NAT traversal.
-    # When the embedded DERP server is enabled stun_listen_addr MUST be defined.
-    #
-    # For more details on how this works, check this great article: https://tailscale.com/blog/how-tailscale-works/
-    stun_listen_addr: "0.0.0.0:3478"
-
-  # List of externally available DERP maps encoded in JSON
-  urls:
-    - https://controlplane.tailscale.com/derpmap/default
-
-  # Locally available DERP map files encoded in YAML
-  #
-  # This option is mostly interesting for people hosting
-  # their own DERP servers:
-  # https://tailscale.com/kb/1118/custom-derp-servers/
-  #
-  # paths:
-  #   - /etc/headscale/derp-example.yaml
-  paths: []
-
-  # If enabled, a worker will be set up to periodically
-  # refresh the given sources and update the derpmap
-  # will be set up.
-  auto_update_enabled: true
-
-  # How often should we check for DERP updates?
-  update_frequency: 24h
-
-# Disables the automatic check for headscale updates on startup
-disable_check_updates: false
-
-# Time before an inactive ephemeral node is deleted?
-ephemeral_node_inactivity_timeout: 30m
-
-# SQLite config
-db_type: sqlite3
-db_path: /var/lib/headscale/db.sqlite
-
-# # Postgres config
-# db_type: postgres
-# db_host: localhost
-# db_port: 5432
-# db_name: headscale
-# db_user: foo
-# db_pass: bar
-
-### TLS configuration
-#
-## Let's encrypt / ACME
-#
-# headscale supports automatically requesting and setting up
-# TLS for a domain with Let's Encrypt.
-#
-# URL to ACME directory
-acme_url: https://acme-v02.api.letsencrypt.org/directory
-
-# Email to register with ACME provider
-acme_email: ""
-
-# Domain name to request a TLS certificate for:
-tls_letsencrypt_hostname: ""
-
-# Client (Tailscale/Browser) authentication mode (mTLS)
-# Acceptable values:
-# - disabled: client authentication disabled
-# - relaxed: client certificate is required but not verified
-# - enforced: client certificate is required and verified
-tls_client_auth_mode: relaxed
-
-# Path to store certificates and metadata needed by
-# letsencrypt
-tls_letsencrypt_cache_dir: /var/lib/headscale/cache
-
-# Type of ACME challenge to use, currently supported types:
-# HTTP-01 or TLS-ALPN-01
-# See [docs/tls.md](docs/tls.md) for more information
-tls_letsencrypt_challenge_type: HTTP-01
-# When HTTP-01 challenge is chosen, letsencrypt must set up a
-# verification endpoint, and it will be listning on:
-# :http = port 80
-tls_letsencrypt_listen: ":http"
-
-## Use already defined certificates:
-tls_cert_path: ""
-tls_key_path: ""
-
-log_level: info
-
-# Path to a file containg ACL policies.
-# ACLs can be defined as YAML or HUJSON.
-# https://tailscale.com/kb/1018/acls/
-acl_policy_path: ""
-
-## DNS
-#
-# headscale supports Tailscale's DNS configuration and MagicDNS.
-# Please have a look to their KB to better understand the concepts:
-#
-# - https://tailscale.com/kb/1054/dns/
-# - https://tailscale.com/kb/1081/magicdns/
-# - https://tailscale.com/blog/2021-09-private-dns-with-magicdns/
-#
-dns_config:
-  # List of DNS servers to expose to clients.
-  nameservers:
-    - 1.1.1.1
-
-  # Split DNS (see https://tailscale.com/kb/1054/dns/),
-  # list of search domains and the DNS to query for each one.
-  #
-  # restricted_nameservers:
-  #   foo.bar.com:
-  #     - 1.1.1.1
-  #   darp.headscale.net:
-  #     - 1.1.1.1
-  #     - 8.8.8.8
-
-  # Search domains to inject.
-  domains: []
-
-  # Whether to use [MagicDNS](https://tailscale.com/kb/1081/magicdns/).
-  # Only works if there is at least a nameserver defined.
-  magic_dns: true
-
-  # Defines the base domain to create the hostnames for MagicDNS.
-  # `base_domain` must be a FQDNs, without the trailing dot.
-  # The FQDN of the hosts will be
-  # `hostname.namespace.base_domain` (e.g., _myhost.mynamespace.example.com_).
-  base_domain: example.com
-
-# Unix socket used for the CLI to connect without authentication
-# Note: for local development, you probably want to change this to:
-unix_socket: /run/headscale/headscale.sock
-unix_socket_permission: "0770"
-#
-# headscale supports experimental OpenID connect support,
-# it is still being tested and might have some bugs, please
-# help us test it.
-# OpenID Connect
-# oidc:
-#   issuer: "https://your-oidc.issuer.com/path"
-#   client_id: "your-oidc-client-id"
-#   client_secret: "your-oidc-client-secret"
-#
-#   If `strip_email_domain` is set to `true`, the domain part of the username email address will be removed.
-#   This will transform `first-name.last-name@example.com` to the namespace `first-name.last-name`
-#   If `strip_email_domain` is set to `false` the domain part will NOT be removed resulting to the following
-#   namespace: `first-name.last-name.example.com`
-#
-#   strip_email_domain: true
diff --git a/net-vpn/headscale/files/headscale.conf b/net-vpn/headscale/files/headscale.confd
index 5bf65c68e358..5bf65c68e358 100644
--- a/net-vpn/headscale/files/headscale.conf
+++ b/net-vpn/headscale/files/headscale.confd
diff --git a/net-vpn/headscale/files/headscaled.initd b/net-vpn/headscale/files/headscale.initd
index 5a12887f444b..5a98c0e6cb34 100644
--- a/net-vpn/headscale/files/headscaled.initd
+++ b/net-vpn/headscale/files/headscale.initd
@@ -18,7 +18,7 @@ depend() {
 start_pre() {
 	if [ ! -s /etc/headscale/config.yaml ] ; then
 		eerror "Missing headscale configuration file"
-		eerror "Please use /etc/headscale/config.yaml.example as example"
+		eerror "Please check the documentation directory for an example"
 		return 1
 	fi
 
diff --git a/net-vpn/headscale/files/headscaled.service b/net-vpn/headscale/files/headscale.service
index fb27b40d4e31..fb27b40d4e31 100644
--- a/net-vpn/headscale/files/headscaled.service
+++ b/net-vpn/headscale/files/headscale.service
diff --git a/net-vpn/headscale/headscale-0.15.0-r1.ebuild b/net-vpn/headscale/headscale-0.15.0-r1.ebuild
new file mode 100644
index 000000000000..856fe17a4444
--- /dev/null
+++ b/net-vpn/headscale/headscale-0.15.0-r1.ebuild
@@ -0,0 +1,49 @@
+# Copyright 2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit go-module systemd
+
+DESCRIPTION="An open source, self-hosted implementation of the Tailscale control server"
+HOMEPAGE="https://github.com/juanfont/headscale"
+SRC_URI="https://github.com/juanfont/headscale/archive/v${PV}.tar.gz -> ${P}.tar.gz
+	https://dev.gentoo.org/~jsmolic/distfiles/net-vpn/headscale/${P}-deps.tar.xz
+"
+
+LICENSE="BSD Apache-2.0 MIT"
+SLOT="0"
+KEYWORDS="~amd64"
+
+DEPEND="
+	acct-group/headscale
+	acct-user/headscale
+"
+RDEPEND="
+	${DEPEND}
+	net-firewall/iptables
+"
+
+PATCHES=(
+	"${FILESDIR}"/config-socket.patch
+)
+
+src_compile() {
+	emake version=v${PV}
+}
+
+src_install() {
+	dobin headscale
+	dodoc -r docs/* config-example.yaml
+	keepdir /etc/headscale /var/lib/headscale
+	systemd_dounit "${FILESDIR}"/headscale.service
+	newconfd "${FILESDIR}"/headscale.confd headscale
+	newinitd "${FILESDIR}"/headscale.initd headscale
+	fowners -R ${PN}:${PN} /etc/headscale /var/lib/headscale
+}
+
+pkg_postinst() {
+	[[ -f "${EROOT}"/etc/headscale/config.yaml ]] && return
+	elog "Please create ${EROOT}/etc/headscale/config.yaml before starting the service"
+	elog "An example is in ${EROOT}/usr/share/doc/${PV}/config-example.yaml"
+}
diff --git a/net-vpn/headscale/headscale-0.15.0.ebuild b/net-vpn/headscale/headscale-0.15.0.ebuild
deleted file mode 100644
index 93a52a9f0cde..000000000000
--- a/net-vpn/headscale/headscale-0.15.0.ebuild
+++ /dev/null
@@ -1,49 +0,0 @@
-# Copyright 2022 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=8
-
-inherit go-module systemd
-
-DESCRIPTION="An open source, self-hosted implementation of the Tailscale control server"
-HOMEPAGE="https://github.com/juanfont/headscale"
-SRC_URI="
-	https://github.com/juanfont/headscale/archive/refs/tags/v${PV}.tar.gz -> ${P}.tar.gz
-	https://dev.gentoo.org/~jsmolic/distfiles/net-vpn/headscale/${P}-deps.tar.xz
-"
-
-LICENSE="BSD Apache-2.0 MIT"
-SLOT="0"
-KEYWORDS="~amd64"
-
-DEPEND="
-	acct-group/headscale
-	acct-user/headscale
-"
-RDEPEND="
-	${DEPEND}
-	net-firewall/iptables
-"
-
-src_install() {
-	keepdir /var/lib/headscale
-	keepdir /etc/headscale
-
-	dobin headscale
-
-	insinto /etc/headscale
-	doins "${FILESDIR}"/config.yaml.example
-
-	fowners -R ${PN}:${PN} /etc/headscale
-	fowners -R ${PN}:${PN} /var/lib/headscale
-
-	systemd_dounit "${FILESDIR}"/headscaled.service
-	newinitd "${FILESDIR}"/headscaled.initd headscaled
-	newconfd "${FILESDIR}"/headscale.conf headscaled
-}
-
-pkg_postinst() {
-	elog "You will need to set up your /etc/headscale/config.yaml file before starting the service"
-	elog "Please use /etc/headscale/config.yaml.example as example"
-	elog "More in the official documentation https://github.com/juanfont/headscale/tree/main/docs"
-}