app-eselect/eselect-gnat: Remove last-rited pkg

Closes: https://bugs.gentoo.org/362753
Signed-off-by: Michał Górny <mgorny@gentoo.org>

14 files changed, 0 insertions, 1533 deletions

diff --git a/app-eselect/eselect-gnat/eselect-gnat-1.3-r1.ebuild b/app-eselect/eselect-gnat/eselect-gnat-1.3-r1.ebuild
deleted file mode 100644
index c05adffcd12e..000000000000
--- a/app-eselect/eselect-gnat/eselect-gnat-1.3-r1.ebuild
+++ /dev/null
@@ -1,35 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils
-
-DESCRIPTION="gnat module for eselect"
-HOMEPAGE="https://www.gentoo.org"
-SRC_URI=""
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ppc x86"
-
-IUSE=""
-RDEPEND="app-admin/eselect"
-
-S="${WORKDIR}"
-
-MODULEDIR="/usr/share/eselect/modules"
-
-# NOTE!!
-# This path is duplicated in gnat-eselect module,
-# adjust in both locations!
-LIBDIR="/usr/share/gnat/lib"
-
-src_install() {
-	dodir ${MODULEDIR}
-	insinto ${MODULEDIR}
-	newins "${FILESDIR}"/gnat.eselect-${PV} gnat.eselect
-	dodir ${LIBDIR}
-	insinto ${LIBDIR}
-	newins "${FILESDIR}"/gnat-common-${PVR}.bash gnat-common.bash
-}
diff --git a/app-eselect/eselect-gnat/eselect-gnat-1.4-r1.ebuild b/app-eselect/eselect-gnat/eselect-gnat-1.4-r1.ebuild
deleted file mode 100644
index c5e81999f4c6..000000000000
--- a/app-eselect/eselect-gnat/eselect-gnat-1.4-r1.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils
-
-DESCRIPTION="gnat module for eselect"
-HOMEPAGE="https://www.gentoo.org"
-SRC_URI=""
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-
-IUSE=""
-RDEPEND="app-admin/eselect"
-
-S="${WORKDIR}"
-
-MODULEDIR="/usr/share/eselect/modules"
-
-# NOTE!!
-# This path is duplicated in gnat-eselect module,
-# adjust in both locations!
-LIBDIR="/usr/share/gnat/lib"
-
-src_install() {
-	dodir ${MODULEDIR}
-	insinto ${MODULEDIR}
-	newins "${FILESDIR}"/gnat.eselect-${PV} gnat.eselect
-	dodir ${LIBDIR}
-	insinto ${LIBDIR}
-	# !ATTN!
-	# Make sure to adjust version of installed file to a proper one if there is
-	# a change!
-	newins "${FILESDIR}"/gnat-common-${PVR}.bash gnat-common.bash
-}
diff --git a/app-eselect/eselect-gnat/eselect-gnat-1.4.ebuild b/app-eselect/eselect-gnat/eselect-gnat-1.4.ebuild
deleted file mode 100644
index 73a6543927f5..000000000000
--- a/app-eselect/eselect-gnat/eselect-gnat-1.4.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils
-
-DESCRIPTION="gnat module for eselect"
-HOMEPAGE="https://www.gentoo.org"
-SRC_URI=""
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86"
-
-IUSE=""
-RDEPEND="app-admin/eselect"
-
-S="${WORKDIR}"
-
-MODULEDIR="/usr/share/eselect/modules"
-
-# NOTE!!
-# This path is duplicated in gnat-eselect module,
-# adjust in both locations!
-LIBDIR="/usr/share/gnat/lib"
-
-src_install() {
-	dodir ${MODULEDIR}
-	insinto ${MODULEDIR}
-	newins "${FILESDIR}"/gnat.eselect-${PV} gnat.eselect
-	dodir ${LIBDIR}
-	insinto ${LIBDIR}
-	# !ATTN!
-	# Make sure to adjust version of installed file to a proper one if there is
-	# a change!
-	newins "${FILESDIR}"/gnat-common-1.3-r1.bash gnat-common.bash
-}
diff --git a/app-eselect/eselect-gnat/eselect-gnat-1.5-r1.ebuild b/app-eselect/eselect-gnat/eselect-gnat-1.5-r1.ebuild
deleted file mode 100644
index c3ec41a07026..000000000000
--- a/app-eselect/eselect-gnat/eselect-gnat-1.5-r1.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils
-
-DESCRIPTION="gnat module for eselect"
-HOMEPAGE="https://www.gentoo.org"
-SRC_URI=""
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~x86 ~sparc"
-
-IUSE=""
-RDEPEND=">=app-admin/eselect-1.2.5"
-
-S="${WORKDIR}"
-
-MODULEDIR="/usr/share/eselect/modules"
-
-# NOTE!!
-# This path is duplicated in gnat-eselect module,
-# adjust in both locations!
-LIBDIR="/usr/share/gnat/lib"
-
-src_install() {
-	dodir ${MODULEDIR}
-	insinto ${MODULEDIR}
-	newins "${FILESDIR}"/gnat.eselect-${PV} gnat.eselect
-	dodir ${LIBDIR}
-	insinto ${LIBDIR}
-	# !ATTN!
-	# Make sure to adjust version of installed file to a proper one if there is
-	# a change!
-	newins "${FILESDIR}"/gnat-common-${PV}.bash gnat-common.bash
-}
diff --git a/app-eselect/eselect-gnat/eselect-gnat-1.5.ebuild b/app-eselect/eselect-gnat/eselect-gnat-1.5.ebuild
deleted file mode 100644
index fe933b324b5d..000000000000
--- a/app-eselect/eselect-gnat/eselect-gnat-1.5.ebuild
+++ /dev/null
@@ -1,38 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=5
-
-inherit eutils
-
-DESCRIPTION="gnat module for eselect"
-HOMEPAGE="https://www.gentoo.org"
-SRC_URI=""
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~ppc ~x86 ~sparc"
-
-IUSE=""
-RDEPEND=">=app-admin/eselect-1.2.5"
-
-S="${WORKDIR}"
-
-MODULEDIR="/usr/share/eselect/modules"
-
-# NOTE!!
-# This path is duplicated in gnat-eselect module,
-# adjust in both locations!
-LIBDIR="/usr/share/gnat/lib"
-
-src_install() {
-	dodir ${MODULEDIR}
-	insinto ${MODULEDIR}
-	newins "${FILESDIR}"/gnat.eselect-${PV} gnat.eselect
-	dodir ${LIBDIR}
-	insinto ${LIBDIR}
-	# !ATTN!
-	# Make sure to adjust version of installed file to a proper one if there is
-	# a change!
-	newins "${FILESDIR}"/gnat-common-1.4-r1.bash gnat-common.bash
-}
diff --git a/app-eselect/eselect-gnat/files/gnat-common-1.3-r1.bash b/app-eselect/eselect-gnat/files/gnat-common-1.3-r1.bash
deleted file mode 100644
index d65994515022..000000000000
--- a/app-eselect/eselect-gnat/files/gnat-common-1.3-r1.bash
+++ /dev/null
@@ -1,222 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-#
-# Original Author: George Shapovalov <george@gentoo.org>
-# Purpose: Contains common vars/locations and functions for use by gnat.eclass,
-# gnat.eselect and gnatbuild.eclass.
-#
-# NOTE!!!
-# This code should just define vars (try to limit these!) and simple functions.
-# No bash extensions!!
-# That is, no portage or eclass constructs are allowed!
-#
-
-
-
-# ----------------------------------
-# Globals
-
-# Environmantal stuff (for env update)
-SPECSDIR="/usr/share/gnat/eselect"
-ENVDIR="/etc/env.d"
-MARKER="55gnat-"
-
-# User configurable settings
-SETTINGSDIR="/etc/ada"
-PRIMELIST="${SETTINGSDIR}/primary_compilers"
-
-## Lib install locations
-##
-## Gnat profile dependent files go under under ${LibTop}/${Gnat_Profile}/${PN}
-## and common files go unde SpecsDir, DataDir
-#PREFIX=/usr
-## Replace %LIBDIR% below with $(get_libdir) in eclasses and ebuilds (top level Ok, inherit multilib)
-## or $(profile2libdir ${profile}) in this code, eselect module or anywhere
-## outside portage (as profile will be available only during actual execution, this only should 
-## be done inside corresponding functions).
-#AdalibSpecsDir=${PREFIX}/include/ada
-#AdalibDataDir=${PREFIX}/share/ada
-#AdalibLibTop=${PREFIX}/%LIBDIR%/ada
-
-
-# ------------------------------------
-# Helpers
-#
-
-# get_all_profile_components splits gnat profile and returns pace separated list of its components:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu gcc 4.1
-# args:
-#  $1 - the string to split
-get_all_profile_components() {
-	local GnatSLOT=${1##*-}
-	local remainder=${1%-*}
-	local GnatPkg=${remainder##*-}
-	remainder=${remainder%-gnat-*}
-	echo "${remainder} ${GnatPkg} ${GnatSLOT}"
-}
-
-# similar to above, returns only SLOT component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> 4.1
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_SLOT() {
-	echo "${1##*-}"
-}
-
-# returns only Pkg component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> gcc
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Pkg() {
-	local remainder=${1%-*}
-	echo "${remainder##*-}"
-}
-
-# returns only Arch component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Arch() {
-	echo ${1%-gnat-*}
-}
-
-
-
-## -------------------------------------------
-#  gnat profile and lib detection functions
-
-
-# create a list of all gnat env.d files
-# for now use trivial implementation - store name of active profile in the
-# env file name, so it gets called 55gnat-${ARCH}-${PN}-${SLOT}
-get_env_list() {
-	for fn in ${ENVDIR}/${MARKER}*; do
-		echo $(basename ${fn})
-	done
-}
-
-
-
-# find all installed compilers and return a list
-find_all_compilers() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ ! -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find installed primary compilers and return a list
-find_primary_compilers() {
-	[[ ! -f ${PRIMELIST} ]] && exit
-	for fn in $(cat ${PRIMELIST}); do
-		[[ -f ${SPECSDIR}/${fn} ]] && echo ${fn};
-	done
-}
-
-# find installed libs and return a list
-find_all_libs() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find libs that have been built for a given profile
-# Arguments:
-#  $1 - gnat profile for which to detect active libs
-find_libs4profile() {
-	libs=( $(find_all_libs) )
-
-	for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-		[[ -f ${SPECSDIR}/${libs[$i]}/$1 ]] && echo "${libs[$i]}"
-	done
-}
-
-
-
-
-## -----------------------
-#  main action - central part of do_set and helpers
-
-
-# extracts values of the passed var definition from given spec file
-# params:
-# $1: spec file (as generated by gnabuild.eclass)
-# $2: variable name
-get_var_from_spec() {
-	local var=$(grep -e "^ *$2=" $1|cut -d= -f2)
-	echo ${var}
-}
-
-
-# Cycle through given libs and form a ':' separated list of settings for the given
-# var. Returned string starts with ':' if there is any non-empty setting,
-# otherwise returns empty string. Repeating settings are omitted, that is
-# unique entry is added only first time it is encountered. No need to have some
-# common dir listed many times in PATH for example.
-#
-# params:
-#   $1 - name of env var to process
-#   $2 - name of gnat profile
-#   $3.. - list of libs to check (to avoid its composition every time)
-#        - the list is expanded to list of args at the point of call
-get_lib_var_settings() {
-	local envVar=$1
-	local toset=$2
-	#echo "get_lib_var_settings params:$@" >> /tmp/eselect-gnat.rep
-	if  [[ "none" != ${3} ]]; then
-		local envString
-		local specLine
-		while [[ -n $3 ]]; do
-			specLine=$(get_var_from_spec ${SPECSDIR}/$3/${toset} ${envVar})
-			#echo "$3:${specLine}." >> /tmp/eselect-gnat.rep
-			if [[ -n ${specLine} ]] && [[ ! ${envString} =~ ${specLine} ]]; then 
-				envString="${envString}:${specLine}"
-			fi
-			shift
-		done
-		echo "${envString}"
-	fi
-}
-
-
-
-# The action!
-# Part common for do_set and do_update of gnat.eselect, also used in gnat.eclass
-# to set environment during lib build and installation
-#
-# params:
-#  $1 - profile to set (toset param inside)
-#  $2 - envfile
-
-generate_envFile() {
-	local toset=$1
-	local envfile=$2
-
-	local binpath="$(get_var_from_spec ${SPECSDIR}/${toset} binpath)"
-	local libexecpath="$(get_var_from_spec ${SPECSDIR}/${toset} libexecpath)"
-	local libs=( $(find_libs4profile ${toset}) )
-	#echo "generate_envFile: ${libs[@]}" >> /tmp/eselect-gnat.rep
-	if (( 0 == ${#libs[@]} )); then
-		libs="none"
-	fi
-
-	local MyPath="${binpath}:${libexecpath}$(get_lib_var_settings PATH ${toset} ${libs[@]})"
-	echo "PATH=${MyPath}" > "${envfile}"
-	echo "ROOTPATH=${MyPath}" >> "${envfile}"
-	echo "MANPATH=$(get_var_from_spec ${SPECSDIR}/${toset} manpath)$(get_lib_var_settings MANPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "INFOPATH=$(get_var_from_spec ${SPECSDIR}/${toset} infopath)$(get_lib_var_settings INFOPATH ${toset} ${libs[@]})" >> "${envfile}"
-	# the next three use the common base
-	local libBase=$(get_var_from_spec ${SPECSDIR}/${toset} ldpath)
-	echo "LDPATH=${libBase}:${libBase}/adalib$(get_lib_var_settings LDPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_INCLUDE_PATH=${libBase}/adainclude$(get_lib_var_settings ADA_INCLUDE_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_OBJECTS_PATH=${libBase}/adalib$(get_lib_var_settings ADA_OBJECTS_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	# ADA_PROJECT_PATH may not be set in any of the installed packages,
-	# we should only create this line if cumulative var is non-empty
-	My_ProjectPath=$(get_lib_var_settings ADA_PROJECT_PATH ${toset} ${libs[@]})
-	if [[ -n ${My_ProjectPath} ]]; then
-		echo "ADA_PROJECT_PATH=${My_ProjectPath}" >> "${envfile}"
-	fi
-}
-
diff --git a/app-eselect/eselect-gnat/files/gnat-common-1.4-r1.bash b/app-eselect/eselect-gnat/files/gnat-common-1.4-r1.bash
deleted file mode 100644
index 5f3c0c8bf8b7..000000000000
--- a/app-eselect/eselect-gnat/files/gnat-common-1.4-r1.bash
+++ /dev/null
@@ -1,225 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-#
-# Author: George Shapovalov <george@gentoo.org>
-# Purpose: Contains common vars/locations and functions for use by gnat.eclass,
-# gnat.eselect and gnatbuild.eclass.
-#
-# NOTE!!!
-# This code should just define vars (try to limit these!) and simple functions.
-# No bash extensions!!
-# That is, no portage or eclass constructs are allowed!
-#
-
-
-
-# ----------------------------------
-# Globals
-
-# Environmantal stuff (for env update)
-SPECSDIR="/usr/share/gnat/eselect"
-ENVDIR="/etc/env.d"
-MARKER="55gnat-"
-
-# User configurable settings
-SETTINGSDIR="/etc/ada"
-PRIMELIST="${SETTINGSDIR}/primary_compilers"
-
-## Lib install locations
-##
-## Gnat profile dependent files go under under ${LibTop}/${Gnat_Profile}/${PN}
-## and common files go unde SpecsDir, DataDir
-#PREFIX=/usr
-## Replace %LIBDIR% below with $(get_libdir) in eclasses and ebuilds (top level Ok, inherit multilib)
-## or $(profile2libdir ${profile}) in this code, eselect module or anywhere
-## outside portage (as profile will be available only during actual execution, this only should 
-## be done inside corresponding functions).
-#AdalibSpecsDir=${PREFIX}/include/ada
-#AdalibDataDir=${PREFIX}/share/ada
-#AdalibLibTop=${PREFIX}/%LIBDIR%/ada
-
-
-# ------------------------------------
-# Helpers
-#
-
-# get_all_profile_components splits gnat profile and returns pace separated list of its components:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu gcc 4.1
-# args:
-#  $1 - the string to split
-get_all_profile_components() {
-	local GnatSLOT=${1##*-}
-	local remainder=${1%-*}
-	local GnatPkg=${remainder##*-}
-	remainder=${remainder%-gnat-*}
-	echo "${remainder} ${GnatPkg} ${GnatSLOT}"
-}
-
-# similar to above, returns only SLOT component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> 4.1
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_SLOT() {
-	echo "${1##*-}"
-}
-
-# returns only Pkg component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> gcc
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Pkg() {
-	local remainder=${1%-*}
-	echo "${remainder##*-}"
-}
-
-# returns only Arch component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Arch() {
-	echo ${1%-gnat-*}
-}
-
-
-
-## -------------------------------------------
-#  gnat profile and lib detection functions
-
-
-# create a list of all gnat env.d files
-# for now use trivial implementation - store name of active profile in the
-# env file name, so it gets called 55gnat-${ARCH}-${PN}-${SLOT}
-get_env_list() {
-	for fn in ${ENVDIR}/${MARKER}*; do
-		echo $(basename ${fn})
-	done
-}
-
-
-
-# find all installed compilers and return a list
-find_all_compilers() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ ! -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find installed primary compilers and return a list
-find_primary_compilers() {
-	[[ ! -f ${PRIMELIST} ]] && exit
-	for fn in $(cat ${PRIMELIST}); do
-		[[ -f ${SPECSDIR}/${fn} ]] && echo ${fn};
-	done
-}
-
-# find installed libs and return a list
-find_all_libs() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find libs that have been built for a given profile
-# Arguments:
-#  $1 - gnat profile for which to detect active libs
-find_libs4profile() {
-	libs=( $(find_all_libs) )
-
-	for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-		[[ -f ${SPECSDIR}/${libs[$i]}/$1 ]] && echo "${libs[$i]}"
-	done
-}
-
-
-
-
-## -----------------------
-#  main action - central part of do_set and helpers
-
-
-# extracts values of the passed var definition from given spec file
-# params:
-# $1: spec file (as generated by gnabuild.eclass)
-# $2: variable name
-get_var_from_spec() {
-	local var=$(grep -e "^ *$2=" $1|cut -d= -f2)
-	echo ${var}
-}
-
-
-# Cycle through given libs and form a ':' separated list of settings for the given
-# var. Repeating settings are omitted, that is unique entry is added only first 
-# time it is encountered.
-#
-# params:
-#   $1 - name of env var to process
-#   $2 - name of gnat profile
-#   $3.. - list of libs to check (to avoid its composition every time)
-#        - the list is expanded to list of args at the point of call
-get_lib_var_settings() {
-	local envVar=$1
-	local toset=$2
-	#echo "get_lib_var_settings params:$@" >> /tmp/eselect-gnat.rep
-	if  [[ "none" != ${3} ]]; then
-		local envString
-		local specLine=$(get_var_from_spec ${SPECSDIR}/$3/${toset} ${envVar})
-		if [[ -n ${specLine} ]]; then 
-			envString="${specLine}"
-		fi
-		shift
-		#
-		while [[ -n $3 ]]; do
-			specLine=$(get_var_from_spec ${SPECSDIR}/$3/${toset} ${envVar})
-			#echo "$3:${specLine}." >> /tmp/eselect-gnat.rep
-			if [[ -n ${specLine} ]] && [[ ! ${envString} =~ ${specLine} ]]; then 
-				envString="${envString}:${specLine}"
-			fi
-			shift
-		done
-		echo "${envString}"
-	fi
-}
-
-
-
-# The action!
-# Part common for do_set and do_update of gnat.eselect, also used in gnat.eclass
-# to set environment during lib build and installation
-#
-# params:
-#  $1 - profile to set (toset param inside)
-#  $2 - envfile
-
-generate_envFile() {
-	local toset=$1
-	local envfile=$2
-
-	local binpath="$(get_var_from_spec ${SPECSDIR}/${toset} binpath)"
-	local libexecpath="$(get_var_from_spec ${SPECSDIR}/${toset} libexecpath)"
-	local libs=( $(find_libs4profile ${toset}) )
-	#echo "generate_envFile: ${libs[@]}" >> /tmp/eselect-gnat.rep
-	if (( 0 == ${#libs[@]} )); then
-		libs="none"
-	fi
-
-	local MyPath="${binpath}:${libexecpath}:$(get_lib_var_settings PATH ${toset} ${libs[@]})"
-	echo "PATH=${MyPath}" > "${envfile}"
-	echo "ROOTPATH=${MyPath}" >> "${envfile}"
-	echo "MANPATH=$(get_var_from_spec ${SPECSDIR}/${toset} manpath):$(get_lib_var_settings MANPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "INFOPATH=$(get_var_from_spec ${SPECSDIR}/${toset} infopath):$(get_lib_var_settings INFOPATH ${toset} ${libs[@]})" >> "${envfile}"
-	# the next three use the common base
-	local libBase=$(get_var_from_spec ${SPECSDIR}/${toset} ldpath)
-	echo "LDPATH=${libBase}:${libBase}/adalib:$(get_lib_var_settings LDPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_INCLUDE_PATH=${libBase}/adainclude:$(get_lib_var_settings ADA_INCLUDE_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_OBJECTS_PATH=${libBase}/adalib:$(get_lib_var_settings ADA_OBJECTS_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	# ADA_PROJECT_PATH may not be set in any of the installed packages,
-	# we should only create this line if cumulative var is non-empty
-	My_ProjectPath=$(get_lib_var_settings ADA_PROJECT_PATH ${toset} ${libs[@]})
-	if [[ -n ${My_ProjectPath} ]]; then
-		echo "ADA_PROJECT_PATH=${My_ProjectPath}" >> "${envfile}"
-	fi
-}
-
diff --git a/app-eselect/eselect-gnat/files/gnat-common-1.5.bash b/app-eselect/eselect-gnat/files/gnat-common-1.5.bash
deleted file mode 100644
index 05af905579ae..000000000000
--- a/app-eselect/eselect-gnat/files/gnat-common-1.5.bash
+++ /dev/null
@@ -1,225 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-#
-# Author: George Shapovalov <george@gentoo.org>
-# Purpose: Contains common vars/locations and functions for use by gnat.eclass,
-# gnat.eselect and gnatbuild.eclass.
-#
-# NOTE!!!
-# This code should just define vars (try to limit these!) and simple functions.
-# No bash extensions!!
-# That is, no portage or eclass constructs are allowed!
-#
-
-
-
-# ----------------------------------
-# Globals
-
-# Environmantal stuff (for env update)
-SPECSDIR="/usr/share/gnat/eselect"
-ENVDIR="/etc/env.d"
-MARKER="55gnat-"
-
-# User configurable settings
-SETTINGSDIR="/etc/ada"
-PRIMELIST="${SETTINGSDIR}/primary_compilers"
-
-## Lib install locations
-##
-## Gnat profile dependent files go under under ${LibTop}/${Gnat_Profile}/${PN}
-## and common files go unde SpecsDir, DataDir
-#PREFIX=/usr
-## Replace %LIBDIR% below with $(get_libdir) in eclasses and ebuilds (top level Ok, inherit multilib)
-## or $(profile2libdir ${profile}) in this code, eselect module or anywhere
-## outside portage (as profile will be available only during actual execution, this only should 
-## be done inside corresponding functions).
-#AdalibSpecsDir=${PREFIX}/include/ada
-#AdalibDataDir=${PREFIX}/share/ada
-#AdalibLibTop=${PREFIX}/%LIBDIR%/ada
-
-
-# ------------------------------------
-# Helpers
-#
-
-# get_all_profile_components splits gnat profile and returns pace separated list of its components:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu gcc 4.1
-# args:
-#  $1 - the string to split
-get_all_profile_components() {
-	local GnatSLOT=${1##*-}
-	local remainder=${1%-*}
-	local GnatPkg=${remainder##*-}
-	remainder=${remainder%-gnat-*}
-	echo "${remainder} ${GnatPkg} ${GnatSLOT}"
-}
-
-# similar to above, returns only SLOT component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> 4.1
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_SLOT() {
-	echo "${1##*-}"
-}
-
-# returns only Pkg component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> gcc
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Pkg() {
-	local remainder=${1%-*}
-	echo "${remainder##*-}"
-}
-
-# returns only Arch component:
-# x86_64-pc-linux-gnu-gnat-gcc-4.1  -> x86_64-pc-linux-gnu
-# args:
-#  $1 - the string to extract the slot from
-get_gnat_Arch() {
-	echo ${1%-gnat-*}
-}
-
-
-
-## -------------------------------------------
-#  gnat profile and lib detection functions
-
-
-# create a list of all gnat env.d files
-# for now use trivial implementation - store name of active profile in the
-# env file name, so it gets called 55gnat-${ARCH}-${PN}-${SLOT}
-get_env_list() {
-	for fn in ${ENVDIR}/${MARKER}*; do
-		echo $(basename ${fn})
-	done
-}
-
-
-
-# find all installed compilers and return a list
-find_all_compilers() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ ! -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find installed primary compilers and return a list
-find_primary_compilers() {
-	[[ ! -f ${PRIMELIST} ]] && exit
-	for fn in $(cat ${PRIMELIST}); do
-		[[ -f ${SPECSDIR}/${fn} ]] && echo ${fn};
-	done
-}
-
-# find installed libs and return a list
-find_all_libs() {
-	[[ ! -d ${SPECSDIR} ]] && exit
-	for fn in ${SPECSDIR}/*; do
-		[[ -d ${fn} ]] && echo $(basename ${fn});
-	done
-}
-
-# find libs that have been built for a given profile
-# Arguments:
-#  $1 - gnat profile for which to detect active libs
-find_libs4profile() {
-	libs=( $(find_all_libs) )
-
-	for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-		[[ -f ${SPECSDIR}/${libs[$i]}/$1 ]] && echo "${libs[$i]}"
-	done
-}
-
-
-
-
-## -----------------------
-#  main action - central part of do_set and helpers
-
-
-# extracts values of the passed var definition from given spec file
-# params:
-# $1: spec file (as generated by gnabuild.eclass)
-# $2: variable name
-get_var_from_spec() {
-	local var=$(grep -e "^ *$2=" $1|cut -d= -f2)
-	echo ${var}
-}
-
-
-# Cycle through given libs and form a ':' separated list of settings for the given
-# var. Repeating settings are omitted, that is unique entry is added only first 
-# time it is encountered.
-#
-# params:
-#   $1 - name of env var to process
-#   $2 - name of gnat profile
-#   $3.. - list of libs to check (to avoid its composition every time)
-#        - the list is expanded to list of args at the point of call
-get_lib_var_settings() {
-	local envVar=$1
-	local toset=$2
-	#echo "get_lib_var_settings params:$@" >> /tmp/eselect-gnat.rep
-	if  [[ "none" != ${3} ]]; then
-		local envString
-		local specLine=$(get_var_from_spec ${SPECSDIR}/$3/${toset} ${envVar})
-		if [[ -n ${specLine} ]]; then 
-			envString="${specLine}"
-		fi
-		shift
-		#
-		while [[ -n $3 ]]; do
-			specLine=$(get_var_from_spec ${SPECSDIR}/$3/${toset} ${envVar})
-			#echo "$3:${specLine}." >> /tmp/eselect-gnat.rep
-			if [[ -n ${specLine} ]] && [[ ! ${envString} =~ ${specLine} ]]; then 
-				envString="${envString}:${specLine}"
-			fi
-			shift
-		done
-		echo "${envString}"
-	fi
-}
-
-
-
-# The action!
-# Part common for do_set and do_update of gnat.eselect, also used in gnat.eclass
-# to set environment during lib build and installation
-#
-# params:
-#  $1 - profile to set (toset param inside)
-#  $2 - envfile
-
-generate_envFile() {
-	local toset=$1
-	local envfile=$2
-
-	local binpath="$(get_var_from_spec ${SPECSDIR}/${toset} binpath)"
-	local libexecpath="$(get_var_from_spec ${SPECSDIR}/${toset} libexecpath)"
-	local libs=( $(find_libs4profile ${toset}) )
-	#echo "generate_envFile: ${libs[@]}" >> /tmp/eselect-gnat.rep
-	if (( 0 == ${#libs[@]} )); then
-		libs="none"
-	fi
-
-	local MyPath="${binpath}:${libexecpath}:$(get_lib_var_settings PATH ${toset} ${libs[@]})"
-	echo "PATH=${MyPath}" > "${envfile}"
-	echo "ROOTPATH=${MyPath}" >> "${envfile}"
-	echo "MANPATH=$(get_var_from_spec ${SPECSDIR}/${toset} manpath):$(get_lib_var_settings MANPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "INFOPATH=$(get_var_from_spec ${SPECSDIR}/${toset} infopath):$(get_lib_var_settings INFOPATH ${toset} ${libs[@]})" >> "${envfile}"
-	# the next three use the common base
-	local libBase=$(get_var_from_spec ${SPECSDIR}/${toset} ldpath)
-	echo "LDPATH=${libBase}:${libBase}/adalib:$(get_lib_var_settings LDPATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_INCLUDE_PATH=${libBase}/adainclude:$(get_lib_var_settings ADA_INCLUDE_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	echo "ADA_OBJECTS_PATH=${libBase}/adalib:$(get_lib_var_settings ADA_OBJECTS_PATH ${toset} ${libs[@]})" >> "${envfile}"
-	# ADA_PROJECT_PATH may not be set in any of the installed packages,
-	# we should only create this line if cumulative var is non-empty
-	My_ProjectPath=$(get_lib_var_settings ADA_PROJECT_PATH ${toset} ${libs[@]})
-	if [[ -n ${My_ProjectPath} ]]; then
-		echo "ADA_PROJECT_PATH=${My_ProjectPath}" >> "${envfile}"
-	fi
-}
-
diff --git a/app-eselect/eselect-gnat/files/gnat.eselect-1.3 b/app-eselect/eselect-gnat/files/gnat.eselect-1.3
deleted file mode 100644
index 548926524747..000000000000
--- a/app-eselect/eselect-gnat/files/gnat.eselect-1.3
+++ /dev/null
@@ -1,206 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-DESCRIPTION="Manage the installed gnat compilers"
-MAINTAINER="ada@gentoo.org"
-SVN_DATE='$Date: 2015/03/31 16:48:57 $'
-VERSION=$(svn_date_to_version "${SVN_DATE}" )
-
-# "inheriting" common stuff
-# this crude sourcing has to stay the way it is, as common code 
-# cannot be part of some eclass (bug #192505)
-. /usr/share/gnat/lib/gnat-common.bash
-
-
-### Phylosophy
-# Each gnat installs a "specs" file named ${ARCH}-${PN}-${SLOT} under ${SPECSDIR}
-# Each lib creates a dir with its name under ${SPECSDIR} and populates it with
-# similar specs files (same name scheme)
-# Recognizing gnat specs from lib specs is then eazy - test entry for being a
-# dir, then just check what gnat profiles are installed for each lib..
-# doset then creates env file that combines settings for gnat and for the
-# corresponding profile of each installed lib..
-
-
-### Helpers
-
-# return *the* name of the active profile, checking that we do not have multiple
-# env files.
-# There can be only one!
-get_current_gnat() {
-	local profiles=( $(get_env_list) ) 
-
-	if [ ${profiles[@]} == "${MARKER}*" ]; then exit; fi
-
-	if (( 1 == ${#profiles[@]} )); then
-		local active=${profiles[0]#${MARKER}}
-	else
-		die -q "${ENVDIR} contains multiple gnat profiles, please cleanup!"
-	fi
-
-	if [ -f ${SPECSDIR}/${active} ]; then
-		echo ${active}
-	else
-		die -q "the active env.d profile does not correspond to any installed gnat!"
-	fi
-}
-
-# check if the passed arg represents the installed gnat and return it or
-# not_found
-# takes args:
-# $1 - list ID to check
-get_name_from_list() {
-    compiler=$1
-
-    compilers=( $(find_all_compilers) )
-    for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-        if [[ ${compilers[$i]} == ${compiler} ]] ; then
-            echo ${compiler}
-            return
-        fi
-    done
-
-    echo "(not-found)"
-}
-
-
-# removes env files (for compiler and libs)
-# params:
-# $1: the name of profile for which to remove env file
-unset_env() {
-	rm -f ${ENVDIR}/${MARKER}$1 &> /dev/null
-}
-
-
-### show action ###
-
-describe_show() {
-	echo "Show the active gnat compiler/profile and installed libs"
-}
-
-do_show() {
-	write_list_start "Current gnat version:"
-	active=$(get_current_gnat)
-	if [ ! -z ${active} ] ; then # not sure why [ -n ] does not do the same
-		write_kv_list_entry "$active" ""
-		libs=( $(find_libs4profile ${active}) )
-		write_list_start "Active libs:"
-		write_numbered_list "${libs[@]}"
-	else
-		write_kv_list_entry "(none set)" ""
-	fi
-}
-
-### list action ###
-
-describe_list() {
-	echo "List installed gnat compilers and libs"
-}
-
-do_list() {
-	compilers=( $(find_all_compilers ) )
-	active=$(get_current_gnat)
-
-	write_list_start "Available gnat compilers:"
-
-	if [[ -n ${compilers[@]} ]] ; then
-		local i
-		for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-			linkversion=${compilers[${i}]}
-
-			[[ $linkversion == $active ]] && \
-				compilers[${i}]="${compilers[${i}]} $(highlight '*' )"
-		done
-		write_numbered_list "${compilers[@]}"
-
-		# now the libs
-		libs=( $(find_all_libs) )
-		write_list_start "Installed libs:"
-		for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-			[ -f ${SPECSDIR}/${libs[$i]}/${active} ] && \
-				libs[${i}]="${libs[${i}]} $(highlight '*' )"
-		done
-		write_numbered_list "${libs[@]}"
-	else
-		write_kv_list_entry "(none found)" ""
-	fi
-}
-
-
-### set action ###
-
-describe_set() {
-	echo "Set active gnat compiler"
-}
-
-# The set action. Parameters:
-# $1 - name of profile to set, obligatory, passed by eselect
-# $2 - optional, name of env file to generate. Used from gnat.eclass.
-do_set() {
-	if [[ -z ${1} ]] ; then
-		# no parameter
-		die -q "You didn't tell me which gnat to use"
-	fi
-
-	local toset=$(get_name_from_list $1)
-	if [[ ${toset} == "(not-found)" ]] ; then
-		die -q "I don't recognise the selection"
-	fi
-
-	# the action!
-	# in this implementation simply create an appropriate env file
-	local active=$(get_current_gnat)
-	if [[ -z ${2} ]] ; then
-		local envfile="${ENVDIR}/${MARKER}${toset}"
-
-		# now we need to remove an old env file, which is guaranteed to 
-		# be unique by get_current_gnat above
-		if [[ -n ${active} ]] ; then
-			unset_env ${active}
-		fi
-		# just for a good measure remove the one we are going to write
-		unset_env ${toset}
-	else
-		local envfile="$2"
-	fi
-
-	generate_envFile ${toset} ${envfile}
-
-	# force update environment
-	# should be replaced with "do_action env update" when #172472 gets resolved
-	env-update &> /dev/null
-}
-
-
-
-### update action ###
-#
-# This action regenerates the /etc/env.d file for the current profile. Basically
-# the same as set, only it does not take any parameters. It should be called from ebuilds
-# installing Ada libs
-
-describe_update() {
-	echo "Update active gnat profile picking up new libs."
-}
-
-do_update() {
-	local toset=$(get_current_gnat)
-	local envfile="${ENVDIR}/${MARKER}${toset}"
-	generate_envFile ${toset} ${envfile}
-	do_action env update &> /dev/null
-}
-
-### unset action ###
-
-describe_unset() {
-	echo "Remove settings for currently active gnat"
-}
-
-do_unset() {
-	local active=$(get_current_gnat)
-	# check whether we have any profile set before removing anything..
-	if [[ -n ${active} ]] ; then
-		unset_env ${active}
-		do_action env update &> /dev/null
-	fi
-}
diff --git a/app-eselect/eselect-gnat/files/gnat.eselect-1.4 b/app-eselect/eselect-gnat/files/gnat.eselect-1.4
deleted file mode 100644
index f2a72092c53a..000000000000
--- a/app-eselect/eselect-gnat/files/gnat.eselect-1.4
+++ /dev/null
@@ -1,229 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-DESCRIPTION="Manage the installed gnat compilers"
-MAINTAINER="ada@gentoo.org"
-SVN_DATE='$Date: 2015/03/31 16:48:57 $'
-VERSION=$(svn_date_to_version "${SVN_DATE}" )
-
-# "inheriting" common stuff
-# this crude sourcing has to stay the way it is, as common code 
-# cannot be part of some eclass (bug #192505)
-. /usr/share/gnat/lib/gnat-common.bash
-
-
-### Phylosophy
-# Each gnat installs a "specs" file named ${ARCH}-${PN}-${SLOT} under ${SPECSDIR}
-# Each lib creates a dir with its name under ${SPECSDIR} and populates it with
-# similar specs files (same name scheme)
-# Recognizing gnat specs from lib specs is then eazy - test entry for being a
-# dir, then just check what gnat profiles are installed for each lib..
-# doset then creates env file that combines settings for gnat and for the
-# corresponding profile of each installed lib..
-
-
-### Helpers
-
-# return *the* name of the active profile, checking that we do not have multiple
-# env files.
-# There can be only one!
-get_current_gnat() {
-	local profiles=( $(get_env_list) ) 
-
-	if [ ${profiles[@]} == "${MARKER}*" ]; then exit; fi
-
-	if (( 1 == ${#profiles[@]} )); then
-		local active=${profiles[0]#${MARKER}}
-	else
-		die -q "${ENVDIR} contains multiple gnat profiles, please cleanup!"
-	fi
-
-	echo ${active}
-#	disabling this check, as we want to use get_current_gnat with empty profile
-#	as an indication that last gnat in SLOT was removed
-#	if [ -f ${SPECSDIR}/${active} ]; then
-#		echo ${active}
-#	else
-#		die -q "the active env.d profile does not correspond to any installed gnat!"
-#	fi
-}
-
-# validity check that was removed from get_current_gnat, in case we need it
-# somewhere..
-# Arguments:
-#  $1  - name of the gnat profiel to check
-profile_is_valid() {
-	if [[ -n $1 ]] ; then
-		[[ -f ${SPECSDIR}/$1 ]] || return 1
-	fi
-}
-
-# check if the passed arg represents the installed gnat and return it or
-# not_found
-# takes args:
-# $1 - list ID to check
-get_name_from_list() {
-    compiler=$1
-
-    compilers=( $(find_all_compilers) )
-    for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-        if [[ ${compilers[$i]} == ${compiler} ]] ; then
-            echo ${compiler}
-            return
-        fi
-    done
-
-    echo "(not-found)"
-}
-
-
-# removes env files (for compiler and libs)
-# params:
-# $1: the name of profile for which to remove env file
-unset_env() {
-	rm -f ${ENVDIR}/${MARKER}$1 &> /dev/null
-}
-
-
-### show action ###
-
-describe_show() {
-	echo "Show the active gnat compiler/profile and installed libs"
-}
-
-do_show() {
-	active=$(get_current_gnat)
-	if $(profile_is_valid ${active}); then
-		write_list_start "Current gnat version:"
-		if [[ -n ${active} ]] ; then
-			write_kv_list_entry "$active" ""
-			libs=( $(find_libs4profile ${active}) )
-			write_list_start "Active libs:"
-			write_numbered_list "${libs[@]}"
-		else
-			write_kv_list_entry "(none set)" ""
-		fi
-	else
-		write_error_msg "The active profile in ${ENVDIR} is not valid! Please set a valid profile!"
-	fi
-}
-
-### list action ###
-
-describe_list() {
-	echo "List installed gnat compilers and libs"
-}
-
-do_list() {
-	compilers=( $(find_all_compilers ) )
-	active=$(get_current_gnat)
-
-	write_list_start "Available gnat compilers:"
-
-	if [[ -n ${compilers[@]} ]] ; then
-		local i
-		for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-			linkversion=${compilers[${i}]}
-
-			[[ $linkversion == $active ]] && \
-				compilers[${i}]="${compilers[${i}]} $(highlight '*' )"
-		done
-		write_numbered_list "${compilers[@]}"
-
-		# now the libs
-		libs=( $(find_all_libs) )
-		write_list_start "Installed libs:"
-		for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-			[ -f ${SPECSDIR}/${libs[$i]}/${active} ] && \
-				libs[${i}]="${libs[${i}]} $(highlight '*' )"
-		done
-		write_numbered_list "${libs[@]}"
-	else
-		write_kv_list_entry "(none found)" ""
-	fi
-}
-
-
-### set action ###
-
-describe_set() {
-	echo "Set active gnat compiler"
-}
-
-# The set action. Parameters:
-# $1 - name of profile to set, obligatory, passed by eselect
-# $2 - optional, name of env file to generate. Used from gnat.eclass.
-do_set() {
-	if [[ -z ${1} ]] ; then
-		# no parameter
-		die -q "You didn't tell me which gnat to use"
-	fi
-
-	local toset=$(get_name_from_list $1)
-	if [[ ${toset} == "(not-found)" ]] ; then
-		die -q "I don't recognise the selection"
-	fi
-
-	# the action!
-	# in this implementation simply create an appropriate env file
-	local active=$(get_current_gnat)
-	if [[ -z ${2} ]] ; then
-		local envfile="${ENVDIR}/${MARKER}${toset}"
-
-		# now we need to remove an old env file, which is guaranteed to 
-		# be unique by get_current_gnat above
-		if [[ -n ${active} ]] ; then
-			unset_env ${active}
-		fi
-		# just for a good measure remove the one we are going to write
-		unset_env ${toset}
-	else
-		local envfile="$2"
-	fi
-
-	generate_envFile ${toset} ${envfile}
-
-	# force update environment
-	# should be replaced with "do_action env update" when #172472 gets resolved
-	env-update &> /dev/null
-}
-
-
-
-### update action ###
-#
-# This action regenerates the /etc/env.d file for the current profile. Basically
-# the same as set, only it does not take any parameters. It should be called from ebuilds
-# installing Ada libs or in the pkg_postrm in gnatbuild.eclass, to clean up the
-# profile if last gnat in SLOT was removed.
-
-describe_update() {
-	echo "Update active gnat profile picking up new libs."
-}
-
-do_update() {
-	local toset=$(get_current_gnat)
-	local envfile="${ENVDIR}/${MARKER}${toset}"
-	# now check whether to update or unset the profile
-	if $(profile_is_valid ${toset}); then
-		generate_envFile ${toset} ${envfile}
-	else
-		unset_env ${toset}
-	fi
-	do_action env update &> /dev/null
-}
-
-### unset action ###
-
-describe_unset() {
-	echo "Remove settings for currently active gnat"
-}
-
-do_unset() {
-	local active=$(get_current_gnat)
-	# check whether we have any profile set before removing anything..
-	if [[ -n ${active} ]] ; then
-		unset_env ${active}
-		do_action env update &> /dev/null
-	fi
-}
diff --git a/app-eselect/eselect-gnat/files/gnat.eselect-1.5 b/app-eselect/eselect-gnat/files/gnat.eselect-1.5
deleted file mode 100644
index fa312feccbbe..000000000000
--- a/app-eselect/eselect-gnat/files/gnat.eselect-1.5
+++ /dev/null
@@ -1,225 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-DESCRIPTION="Manage the installed gnat compilers"
-MAINTAINER="ada@gentoo.org"
-SVN_DATE='$Date: 2015/03/31 16:48:57 $'
-VERSION=$(svn_date_to_version "${SVN_DATE}" )
-
-# "inheriting" common stuff
-# this crude sourcing has to stay the way it is, as common code 
-# cannot be part of some eclass (bug #192505)
-. /usr/share/gnat/lib/gnat-common.bash
-
-
-### Phylosophy
-# Each gnat installs a "specs" file named ${ARCH}-${PN}-${SLOT} under ${SPECSDIR}
-# Each lib creates a dir with its name under ${SPECSDIR} and populates it with
-# similar specs files (same name scheme)
-# Recognizing gnat specs from lib specs is then eazy - test entry for being a
-# dir, then just check what gnat profiles are installed for each lib..
-# doset then creates env file that combines settings for gnat and for the
-# corresponding profile of each installed lib..
-
-
-### Helpers
-
-# return *the* name of the active profile, checking that we do not have multiple
-# env files.
-# There can be only one!
-get_current_gnat() {
-	local profiles=( $(get_env_list) ) 
-
-	if [ ${profiles[@]} == "${MARKER}*" ]; then exit; fi
-
-	if (( 1 == ${#profiles[@]} )); then
-		local active=${profiles[0]#${MARKER}}
-	else
-		die -q "${ENVDIR} contains multiple gnat profiles, please cleanup!"
-	fi
-
-	echo ${active}
-#	disabling this check, as we want to use get_current_gnat with empty profile
-#	as an indication that last gnat in SLOT was removed
-#	if [ -f ${SPECSDIR}/${active} ]; then
-#		echo ${active}
-#	else
-#		die -q "the active env.d profile does not correspond to any installed gnat!"
-#	fi
-}
-
-# validity check that was removed from get_current_gnat, in case we need it
-# somewhere..
-# Arguments:
-#  $1  - name of the gnat profiel to check
-profile_is_valid() {
-	if [[ -n $1 ]] ; then
-		[[ -f ${SPECSDIR}/$1 ]] || return 1
-	fi
-}
-
-# check if the passed arg represents the installed gnat and return it or
-# not_found
-# takes args:
-# $1 - list ID to check
-get_name_from_list() {
-    compiler=$1
-
-    compilers=( $(find_all_compilers) )
-    for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-        if [[ ${compilers[$i]} == ${compiler} ]] ; then
-            echo ${compiler}
-            return
-        fi
-    done
-
-    echo "(not-found)"
-}
-
-
-# removes env files (for compiler and libs)
-# params:
-# $1: the name of profile for which to remove env file
-unset_env() {
-	rm -f ${ENVDIR}/${MARKER}$1 &> /dev/null
-}
-
-
-### show action ###
-
-describe_show() {
-	echo "Show the active gnat compiler/profile and installed libs"
-}
-
-do_show() {
-	active=$(get_current_gnat)
-	if $(profile_is_valid ${active}); then
-		write_list_start "Current gnat version:"
-		if [[ -n ${active} ]] ; then
-			write_kv_list_entry "$active" ""
-			libs=( $(find_libs4profile ${active}) )
-			write_list_start "Active libs:"
-			write_numbered_list "${libs[@]}"
-		else
-			write_kv_list_entry "(none set)" ""
-		fi
-	else
-		write_error_msg "The active profile in ${ENVDIR} is not valid! Please set a valid profile!"
-	fi
-}
-
-### list action ###
-
-describe_list() {
-	echo "List installed gnat compilers and libs"
-}
-
-do_list() {
-	compilers=( $(find_all_compilers ) )
-	active=$(get_current_gnat)
-
-	write_list_start "Available gnat compilers:"
-
-	local i
-	for (( i = 0 ; i < ${#compilers[@]} ; i = i + 1 )) ; do
-		linkversion=${compilers[${i}]}
-
-		[[ $linkversion == $active ]] && \
-			compilers[${i}]=$(highlight_marker "${compilers[${i}]}")
-	done
-	write_numbered_list -m "(none)" "${compilers[@]}"
-
-	# now the libs
-	libs=( $(find_all_libs) )
-	write_list_start "Installed libs:"
-	for (( i = 0 ; i < ${#libs[@]} ; i = i + 1 )) ; do
-		[ -f ${SPECSDIR}/${libs[$i]}/${active} ] && \
-			libs[${i}]=$(highlight_marker "${libs[${i}]}")
-	done
-	write_numbered_list -m "(no libs)" "${libs[@]}"
-}
-
-
-### set action ###
-
-describe_set() {
-	echo "Set active gnat compiler"
-}
-
-# The set action. Parameters:
-# $1 - name of profile to set, obligatory, passed by eselect
-# $2 - optional, name of env file to generate. Used from gnat.eclass.
-do_set() {
-	if [[ -z ${1} ]] ; then
-		# no parameter
-		die -q "You didn't tell me which gnat to use"
-	fi
-
-	local toset=$(get_name_from_list $1)
-	if [[ ${toset} == "(not-found)" ]] ; then
-		die -q "I don't recognise the selection"
-	fi
-
-	# the action!
-	# in this implementation simply create an appropriate env file
-	local active=$(get_current_gnat)
-	if [[ -z ${2} ]] ; then
-		local envfile="${ENVDIR}/${MARKER}${toset}"
-
-		# now we need to remove an old env file, which is guaranteed to 
-		# be unique by get_current_gnat above
-		if [[ -n ${active} ]] ; then
-			unset_env ${active}
-		fi
-		# just for a good measure remove the one we are going to write
-		unset_env ${toset}
-	else
-		local envfile="$2"
-	fi
-
-	generate_envFile ${toset} ${envfile}
-
-	# force update environment
-	# should be replaced with "do_action env update" when #172472 gets resolved
-	env-update &> /dev/null
-}
-
-
-
-### update action ###
-#
-# This action regenerates the /etc/env.d file for the current profile. Basically
-# the same as set, only it does not take any parameters. It should be called from ebuilds
-# installing Ada libs or in the pkg_postrm in gnatbuild.eclass, to clean up the
-# profile if last gnat in SLOT was removed.
-
-describe_update() {
-	echo "Update active gnat profile picking up new libs."
-}
-
-do_update() {
-	local toset=$(get_current_gnat)
-	local envfile="${ENVDIR}/${MARKER}${toset}"
-	# now check whether to update or unset the profile
-	if $(profile_is_valid ${toset}); then
-		generate_envFile ${toset} ${envfile}
-	else
-		unset_env ${toset}
-	fi
-	do_action env update &> /dev/null
-}
-
-### unset action ###
-
-describe_unset() {
-	echo "Remove settings for currently active gnat"
-}
-
-do_unset() {
-	local active=$(get_current_gnat)
-	# check whether we have any profile set before removing anything..
-	if [[ -n ${active} ]] ; then
-		unset_env ${active}
-		do_action env update &> /dev/null
-	fi
-}
diff --git a/app-eselect/eselect-gnat/metadata.xml b/app-eselect/eselect-gnat/metadata.xml
deleted file mode 100644
index 70aa7cdf2d3f..000000000000
--- a/app-eselect/eselect-gnat/metadata.xml
+++ /dev/null
@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
-<!--maintainer-needed-->
-<longdescription>The eselect module for the supported gnat compilers.</longdescription>
-</pkgmetadata>
diff --git a/profiles/package.mask b/profiles/package.mask
index e0d6a8bc6c50..9a02aeab6db9 100644
--- a/profiles/package.mask
+++ b/profiles/package.mask
@@ -736,13 +736,6 @@ sys-cluster/util-vserver
 # Removal in 30 days.  Bug #572882.
 dev-php/php-openid
 
-# Michał Górny <mgorny@gentoo.org> (13 Mar 2019)
-# The eselect module is obsolete, now that dev-lang/gnat-gpl is the only
-# implementation in Gentoo.  It is unmaintained and has unresolved QA
-# issues.
-# Removal in 30 days.  Bug #362753.
-app-eselect/eselect-gnat
-
 # Eray Aslan <eras@gentoo.org> (01 Mar 2019)
 # Mask experimental software
 =mail-mta/postfix-3.5*
diff --git a/profiles/updates/1Q-2015 b/profiles/updates/1Q-2015
index 77ec8d1f3f21..9a0514d76812 100644
--- a/profiles/updates/1Q-2015
+++ b/profiles/updates/1Q-2015
@@ -23,7 +23,6 @@ move app-admin/eselect-chuck app-eselect/eselect-chuck
 move app-admin/eselect-ctags app-eselect/eselect-ctags
 move app-admin/eselect-emacs app-eselect/eselect-emacs
 move app-admin/eselect-fontconfig app-eselect/eselect-fontconfig
-move app-admin/eselect-gnat app-eselect/eselect-gnat
 move app-admin/eselect-gnome-shell-extensions app-eselect/eselect-gnome-shell-extensions
 move app-admin/eselect-infinality app-eselect/eselect-infinality
 move app-admin/eselect-java app-eselect/eselect-java