Imported udev-103 from /usr/portage.

svn path=/; revision=1

12 files changed, 1283 insertions, 0 deletions

diff --git a/udev-bugs/sys-fs/udev/ChangeLog b/udev-bugs/sys-fs/udev/ChangeLog
new file mode 100644
index 0000000..03f3bd5
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/ChangeLog
@@ -0,0 +1,10 @@
+# ChangeLog for sys-fs/udev
+# Copyright 1999-2007 Gentoo Foundation; Distributed under the GPL v2
+# $Header: $
+
+  15 Jan 2007; Matthias Schwarzott <zzam@gentoo.org>
+  +files/05-udev-early.rules-079, +files/udev.rules-098,
+  +files/udev-start-099.sh, +udev-103.ebuild, +udev-103-r1.ebuild,
+  +files/seq_node.sh, +files/udev.conf.post_081, +files/udev-stop.sh:
+  Imported udev-103 from /usr/portage.
+
diff --git a/udev-bugs/sys-fs/udev/Manifest b/udev-bugs/sys-fs/udev/Manifest
new file mode 100644
index 0000000..16bb859
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/Manifest
@@ -0,0 +1,43 @@
+AUX 05-udev-early.rules-079 385 RMD160 04de1f937d47a2d42eeec879851a1a00d847cecc SHA1 bc22e6d9ea326a80910e065d65f1909303e2eb1d SHA256 c50db994a4a40d6b7aa466944c2ab14a00a6269a2b9f0ae26b1049cf6881b682
+MD5 c5e955ffa18f2f4526a67c00dbe8b870 files/05-udev-early.rules-079 385
+RMD160 04de1f937d47a2d42eeec879851a1a00d847cecc files/05-udev-early.rules-079 385
+SHA256 c50db994a4a40d6b7aa466944c2ab14a00a6269a2b9f0ae26b1049cf6881b682 files/05-udev-early.rules-079 385
+AUX seq_node.sh 1628 RMD160 2851f756afdcf1a7ee8c9e7652e129ce6a71d828 SHA1 b991fe67410841471a978429b18b1c660cf366f9 SHA256 e79b4f5dc92714d6051912188cce0cc827bb0cd7a662f13cbdef2218bba65cee
+MD5 7532c45b87b0ee7d13627088d95845e3 files/seq_node.sh 1628
+RMD160 2851f756afdcf1a7ee8c9e7652e129ce6a71d828 files/seq_node.sh 1628
+SHA256 e79b4f5dc92714d6051912188cce0cc827bb0cd7a662f13cbdef2218bba65cee files/seq_node.sh 1628
+AUX udev-start-099.sh 3574 RMD160 306aa783d9915a24017730e7f5871350f096d818 SHA1 15a8c0d0c5170ecad54a6c6329be4955139c7526 SHA256 e76e214ac122ea6e9dd3468f1d33a8376111a5299c9fef697f883d37f02ebd50
+MD5 de8c4747585960be3a56c6d527feb550 files/udev-start-099.sh 3574
+RMD160 306aa783d9915a24017730e7f5871350f096d818 files/udev-start-099.sh 3574
+SHA256 e76e214ac122ea6e9dd3468f1d33a8376111a5299c9fef697f883d37f02ebd50 files/udev-start-099.sh 3574
+AUX udev-stop.sh 2158 RMD160 0293fc9cd5de85b17624d38bd2c22a48c9722453 SHA1 6d918052006403d0fe1ab34041e36581cdeddcd4 SHA256 bb4fad16e3b58707565d9bb6652c94d917378dc0c462fd660957e17860313429
+MD5 b73dfbd0300c444f047f77914ca1c956 files/udev-stop.sh 2158
+RMD160 0293fc9cd5de85b17624d38bd2c22a48c9722453 files/udev-stop.sh 2158
+SHA256 bb4fad16e3b58707565d9bb6652c94d917378dc0c462fd660957e17860313429 files/udev-stop.sh 2158
+AUX udev.conf.post_081 681 RMD160 16a7e32f351fa5ca761c32fa387993a3d925d55c SHA1 09647c44f78476031b2fcf1a304069f63ceb231f SHA256 db8f66c5c0f87f5ab3566872c6ec5cd5752cb29ff9d7458607ef9a5c4bf7443a
+MD5 a7adc8ae806cee9c077406766658cab2 files/udev.conf.post_081 681
+RMD160 16a7e32f351fa5ca761c32fa387993a3d925d55c files/udev.conf.post_081 681
+SHA256 db8f66c5c0f87f5ab3566872c6ec5cd5752cb29ff9d7458607ef9a5c4bf7443a files/udev.conf.post_081 681
+AUX udev.rules-098 10095 RMD160 9bac5d74ee0fc2f62da56854121f9adef9501eae SHA1 5286733c62564e6ce708666d1c372c639373d484 SHA256 211d8d7820f0bb474f0ffad172359fc3b9f5064422ee68af5961558df0e1dcac
+MD5 295a9b7bdc8bdb239f8860d14af761b0 files/udev.rules-098 10095
+RMD160 9bac5d74ee0fc2f62da56854121f9adef9501eae files/udev.rules-098 10095
+SHA256 211d8d7820f0bb474f0ffad172359fc3b9f5064422ee68af5961558df0e1dcac files/udev.rules-098 10095
+DIST udev-103.tar.bz2 200027 RMD160 3b00a83ad8c538109ee030e2e471422272c7d071 SHA1 015372f585beeba05217ad6568178820b2713571 SHA256 047f5e2895f707117ab726cedd89fd35e8c9105530af54a8038fe81cf61c4e3f
+EBUILD udev-103-r1.ebuild 11300 RMD160 083143aac8a4392d81329d9acbf03e040c1ae08a SHA1 6501d131a7922abc25f0765f0b79e8cf5a801775 SHA256 91db191f5fecc499010386400914af349e05b3d8ddf3ac7fc1f2a7ed433f93a4
+MD5 cd8b27d5d9326937f41d19435fbf4440 udev-103-r1.ebuild 11300
+RMD160 083143aac8a4392d81329d9acbf03e040c1ae08a udev-103-r1.ebuild 11300
+SHA256 91db191f5fecc499010386400914af349e05b3d8ddf3ac7fc1f2a7ed433f93a4 udev-103-r1.ebuild 11300
+EBUILD udev-103.ebuild 11291 RMD160 88c3627c0dbbdbef73d0f5c52c448d3f8b051c02 SHA1 6c9d38716d2f3543e0113f4cb039b6d274e2ec3b SHA256 4a62f7bd8adbd0bca064d9b25765e4b3447b559d2db49a6fef38dd0a77909bbb
+MD5 77d8d60dc3d66f8d617eee26f7027908 udev-103.ebuild 11291
+RMD160 88c3627c0dbbdbef73d0f5c52c448d3f8b051c02 udev-103.ebuild 11291
+SHA256 4a62f7bd8adbd0bca064d9b25765e4b3447b559d2db49a6fef38dd0a77909bbb udev-103.ebuild 11291
+MISC ChangeLog 399 RMD160 a045182f5a7290ca9c2372ccab8beee8be53bbbe SHA1 85665f9768773fe35f839dfcacaf41318e0258ed SHA256 bd9549d985fbdda0bd98b747673c5661eef7169447c25cd905570759d0b35d4b
+MD5 f29827406dd78e4fb46e579906aa1b75 ChangeLog 399
+RMD160 a045182f5a7290ca9c2372ccab8beee8be53bbbe ChangeLog 399
+SHA256 bd9549d985fbdda0bd98b747673c5661eef7169447c25cd905570759d0b35d4b ChangeLog 399
+MD5 0a038fef39f2c8ccb4a613719e0f817b files/digest-udev-103 229
+RMD160 fd217b32f070097ae37ba5ee5a96a84faab5edef files/digest-udev-103 229
+SHA256 7638db47ed884246551e3d27d9be0fd088c0db9a7e92c3359efa901a87742a28 files/digest-udev-103 229
+MD5 0a038fef39f2c8ccb4a613719e0f817b files/digest-udev-103-r1 229
+RMD160 fd217b32f070097ae37ba5ee5a96a84faab5edef files/digest-udev-103-r1 229
+SHA256 7638db47ed884246551e3d27d9be0fd088c0db9a7e92c3359efa901a87742a28 files/digest-udev-103-r1 229
diff --git a/udev-bugs/sys-fs/udev/files/05-udev-early.rules-079 b/udev-bugs/sys-fs/udev/files/05-udev-early.rules-079
new file mode 100644
index 0000000..763e9b7
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/05-udev-early.rules-079
@@ -0,0 +1,8 @@
+# ignore these events until someone needs them
+SUBSYSTEM=="drivers",	OPTIONS="ignore_device"
+SUBSYSTEM=="module",	OPTIONS="ignore_device"
+
+# sysfs is populated after the event is sent
+ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus"
+ACTION=="add", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt"
+ACTION=="add", SUBSYSTEM=="net", WAIT_FOR_SYSFS="address"
diff --git a/udev-bugs/sys-fs/udev/files/digest-udev-103 b/udev-bugs/sys-fs/udev/files/digest-udev-103
new file mode 100644
index 0000000..1cb26bc
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/digest-udev-103
@@ -0,0 +1,3 @@
+MD5 7360ce47b5ec3f9fa71f18071ecb8b97 udev-103.tar.bz2 200027
+RMD160 3b00a83ad8c538109ee030e2e471422272c7d071 udev-103.tar.bz2 200027
+SHA256 047f5e2895f707117ab726cedd89fd35e8c9105530af54a8038fe81cf61c4e3f udev-103.tar.bz2 200027
diff --git a/udev-bugs/sys-fs/udev/files/digest-udev-103-r1 b/udev-bugs/sys-fs/udev/files/digest-udev-103-r1
new file mode 100644
index 0000000..1cb26bc
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/digest-udev-103-r1
@@ -0,0 +1,3 @@
+MD5 7360ce47b5ec3f9fa71f18071ecb8b97 udev-103.tar.bz2 200027
+RMD160 3b00a83ad8c538109ee030e2e471422272c7d071 udev-103.tar.bz2 200027
+SHA256 047f5e2895f707117ab726cedd89fd35e8c9105530af54a8038fe81cf61c4e3f udev-103.tar.bz2 200027
diff --git a/udev-bugs/sys-fs/udev/files/seq_node.sh b/udev-bugs/sys-fs/udev/files/seq_node.sh
new file mode 100755
index 0000000..93a6ed9
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/seq_node.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# Author: Martin Schlemmer <azarah@gentoo.org>
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/files/seq_node.sh,v 1.2 2006/07/05 09:06:06 azarah Exp $
+
+# Stupid little script to emulate the depriciated '%e' directive of udev.
+# I am not sure why its supposidly broken, so this might need fixing if it
+# have the same issue as '%e'.
+#
+# Usage: seq_node.sh <root> <kernel name> <wanted node>
+#
+#  root        - root of udev (usuall /dev)
+#  kernel name - kernel name for device
+#  wanted node - needed free node
+#
+# Example: seq_node.sh %r %k cdrom
+#
+#  If called as above, it should return 'cdrom' if free, else 'cdrom1',
+#  'cdrom2', etc.  It also checks if an existing node was already created for
+#  the specific 'kernel name'.
+#
+
+root=$1
+kname=$2
+node=$3
+
+count=0
+new_node=${node}
+
+if [[ -z ${root} || -z ${kname} || -z ${node} ]] ; then
+	exit 1
+fi
+
+get_filename() {
+	local symlink=$1
+	local filename=
+
+	if [[ ! -L ${root}/${symlink} ]] ; then
+		echo "${symlink}"
+		return 0
+	fi
+
+	if type -p readlink &>/dev/null ; then
+		filename=$(readlink "${root}/${symlink}")
+	else
+		filename=$(perl -e "print readlink(\"${root}/${symlink}\")" 2>/dev/null)
+	fi
+
+	echo "${filename}"
+}
+
+while [[ -e "${root}/${new_node}" || -L "${root}/${new_node}" ]] ; do
+	# Check if existing node is the same as the kname we are looking
+	# for a new node, and return that instead
+	if [[ $(get_filename "${new_node}") == "${kname}" ]] ; then
+		break
+	fi
+
+	let "count += 1"
+	new_node="${node}${count}"
+done
+
+echo "${new_node}"
+
+exit 0
+
diff --git a/udev-bugs/sys-fs/udev/files/udev-start-099.sh b/udev-bugs/sys-fs/udev/files/udev-start-099.sh
new file mode 100644
index 0000000..04fee64
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/udev-start-099.sh
@@ -0,0 +1,139 @@
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+udev_version() {
+	local version=0
+
+	if [[ -x /sbin/udev ]] ; then
+		version=$(/sbin/udev -V)
+		# We need it without a leading '0', else bash do the wrong thing
+		version=${version##0}
+		# Older udev's will print nothing
+		[[ -z ${version} ]] && version=0
+	fi
+
+	echo "${version}"
+}
+
+populate_udev() {
+	# populate /dev with devices already found by the kernel
+	if [ $(get_KV) -gt "$(KV_to_int '2.6.14')" ] ; then
+		ebegin "Populating /dev with existing devices through uevents"
+		local opts=
+		[[ ${RC_COLDPLUG} != "yes" && $(udev_version) -ge "96" ]] && \
+			opts="--attr-match=dev"
+		 /sbin/udevtrigger ${opts}
+		eend $?
+	else
+		ebegin "Populating /dev with existing devices with udevstart"
+		/sbin/udevstart
+		eend $?
+	fi
+
+	# loop until everything is finished
+	# there's gotta be a better way...
+	ebegin "Letting udev process events"
+	/sbin/udevsettle --timeout=60
+	eend $?
+
+	return 0
+}
+
+seed_dev() {
+	# Seed /dev with some things that we know we need
+	ebegin "Seeding /dev with needed nodes"
+
+	# copy over any persistant things
+	if [[ -d /lib/udev/devices ]] ; then
+		cp --preserve=all --recursive --update /lib/udev/devices/* /dev
+	fi
+
+	# Not provided by sysfs but needed
+	ln -snf /proc/self/fd /dev/fd
+	ln -snf fd/0 /dev/stdin
+	ln -snf fd/1 /dev/stdout
+	ln -snf fd/2 /dev/stderr
+	[[ -e /proc/kcore ]] && ln -snf /proc/kcore /dev/core
+
+	# Create problematic directories
+	mkdir -p /dev/{pts,shm}
+	eend 0
+}
+
+main() {
+	# Setup temporary storage for /dev
+	ebegin "Mounting /dev for udev"
+	if [[ ${RC_USE_FSTAB} == "yes" ]] ; then
+		mntcmd=$(get_mount_fstab /dev)
+	else
+		unset mntcmd
+	fi
+	if [[ -n ${mntcmd} ]] ; then
+		try mount -n ${mntcmd}
+	else
+		# This is bash only, but saves on using grep
+		if [[ $(</proc/filesystems)$'\n' =~ [[:space:]]tmpfs$'\n' ]] ; then
+			mntcmd="tmpfs"
+		else
+			mntcmd="ramfs"
+		fi
+		# many video drivers require exec access in /dev #92921
+		try mount -n -t ${mntcmd} udev /dev -o exec,nosuid,mode=0755
+	fi
+	eend $?
+
+	# Create a file so that our rc system knows it's still in sysinit.
+	# Existance means init scripts will not directly run.
+	# rc will remove the file when done with sysinit.
+	touch /dev/.rcsysinit
+
+	# Selinux lovin; /selinux should be mounted by selinux-patched init
+	if [[ -x /sbin/restorecon && -c /selinux/null ]] ; then
+		restorecon /dev &> /selinux/null
+	fi
+
+	# Actually get udev rolling
+	if [[ ${RC_DEVICE_TARBALL} == "yes" && \
+	      -s /lib/udev/state/devices.tar.bz2 ]] ; then
+		ebegin "Populating /dev with saved device nodes"
+		try tar -jxpf /lib/udev/state/devices.tar.bz2 -C /dev
+		eend $?
+	fi
+
+	seed_dev
+
+	# Setup hotplugging (if possible)
+	if [[ -e /proc/sys/kernel/hotplug ]] ; then
+		ebegin "Setting up proper hotplug agent"
+		eindent
+		if [[ $(get_KV) -gt $(KV_to_int '2.6.14') ]] ; then
+			einfo "Using netlink for hotplug events..."
+			echo "" > /proc/sys/kernel/hotplug
+		else
+			einfo "Setting /sbin/udevsend as hotplug agent ..."
+			echo "/sbin/udevsend" > /proc/sys/kernel/hotplug
+		fi
+		eoutdent
+		eend 0
+	fi
+
+	ebegin "Starting udevd"
+	/sbin/udevd --daemon
+	eend $?
+
+	populate_udev
+
+	# Create nodes that udev can't
+	ebegin "Finalizing udev configuration"
+	[[ -x /sbin/dmsetup ]] && /sbin/dmsetup mknodes &>/dev/null
+	[[ -x /sbin/lvm ]] && \
+		/sbin/lvm vgscan -P --mknodes --ignorelockingfailure &>/dev/null
+	# Running evms_activate on a LiveCD causes lots of headaches
+	[[ -z ${CDBOOT} ]] && [[ -x /sbin/evms_activate ]] && \
+		/sbin/evms_activate -q &>/dev/null
+	eend 0
+}
+
+main
+
+# vim:ts=4
diff --git a/udev-bugs/sys-fs/udev/files/udev-stop.sh b/udev-bugs/sys-fs/udev/files/udev-stop.sh
new file mode 100755
index 0000000..e031cd7
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/udev-stop.sh
@@ -0,0 +1,68 @@
+# Copyright 1999-2005 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+main() {
+	if [[ -e /dev/.devfsd || ! -e /dev/.udev || ! -z ${CDBOOT} || \
+	   ${RC_DEVICE_TARBALL} != "yes" ]] || \
+	   ! touch /lib/udev-state/devices.tar.bz2 2>/dev/null
+	then
+		return 0
+	fi
+		
+	ebegin "Saving device nodes"
+	# Handle our temp files
+	devices_udev=$(mktemp /tmp/devices.udev.XXXXXX)
+	devices_real=$(mktemp /tmp/devices.real.XXXXXX)
+	devices_totar=$(mktemp /tmp/devices.totar.XXXXXX)
+	device_tarball=$(mktemp /tmp/devices-XXXXXX)
+	
+	if [[ -z ${devices_udev} || -z ${devices_real} || \
+	      -z ${devices_totar} || -z ${device_tarball} ]] ; then
+		eend 1 "Could not create temporary files!"
+	else
+		cd /dev
+		# Find all devices
+		find . -xdev -type b -or -type c -or -type l | cut -d/ -f2- > \
+			"${devices_real}"
+		# Figure out what udev created
+		eval $(grep '^[[:space:]]*udev_db=' /etc/udev/udev.conf)
+		if [[ -d ${udev_db} ]]; then
+			# New udev_db is clear text ...
+			udevinfo=$(cat "${udev_db}"/*)
+		else
+			# Old one is not ...
+			udevinfo=$(udevinfo -d)
+		fi
+		# This basically strips 'S:' and 'N:' from the db output, and then
+		# print all the nodes/symlinks udev created ...
+		echo "${udevinfo}" | gawk '
+			/^(N|S):.+/ {
+				sub(/^(N|S):/, "")
+				split($0, nodes)
+				for (x in nodes)
+					print nodes[x]
+			}' > "${devices_udev}"
+		# These ones we also do not want in there
+		for x in MAKEDEV core fd initctl pts shm stderr stdin stdout; do
+			echo "${x}" >> "${devices_udev}"
+		done
+		fgrep -x -v -f "${devices_udev}" < "${devices_real}" > "${devices_totar}"
+		# Now only tarball those not created by udev if we have any
+		if [[ -s ${devices_totar} ]]; then
+			# we dont want to descend into mounted filesystems (e.g. devpts)
+			# looking up username may involve NIS/network, and net may be down
+			tar --one-file-system --numeric-owner -jcpf "${device_tarball}" -T "${devices_totar}"
+			mv -f "${device_tarball}" /lib/udev-state/devices.tar.bz2
+		else
+			rm -f /lib/udev-state/devices.tar.bz2
+		fi
+		eend 0
+	fi
+
+	rm -f "${devices_udev}" "${devices_real}" "${devices_totar}" "${device_tarball}"
+}
+
+main
+
+
+# vim:ts=4
diff --git a/udev-bugs/sys-fs/udev/files/udev.conf.post_081 b/udev-bugs/sys-fs/udev/files/udev.conf.post_081
new file mode 100644
index 0000000..8be804a
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/udev.conf.post_081
@@ -0,0 +1,17 @@
+# /etc/udev/udev.conf:  main config file for udev
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/files/udev.conf.post_081,v 1.1 2006/01/31 03:44:41 gregkh Exp $
+#
+# This file can be used to override some of udev's default values.
+# See the udev man page for more details about these values.
+
+# udev_root - where in the filesystem to place the device nodes
+udev_root="/dev/"
+
+# udev_rules - The name and location of the udev rules file
+udev_rules="/etc/udev/rules.d/"
+
+# The initial syslog(3) priority: "err", "info", "debug" or its
+# numerical equivalent. For runtime debugging, the daemons internal
+# state can be changed with: "udevcontrol log_priority=<value>".
+udev_log="err"
+
diff --git a/udev-bugs/sys-fs/udev/files/udev.rules-098 b/udev-bugs/sys-fs/udev/files/udev.rules-098
new file mode 100644
index 0000000..bc1c84d
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/files/udev.rules-098
@@ -0,0 +1,283 @@
+# /etc/udev/rules/50-udev.rules:  device naming rules for udev
+#
+# Gentoo specific rules
+#
+# There are a number of modifiers that are allowed to be used in some of the
+# fields.  See the udev man page for a full description of them.
+#
+# Try not to modify this file, if you wish to change things, create a new rule
+# file that can be run before this one.
+#
+
+
+# console
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty",	OPTIONS="last_rule"
+KERNEL=="vcs*",                 NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="vcsa*",                NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="tty",                  NAME="%k", GROUP="tty", MODE="0666",	OPTIONS="last_rule"
+KERNEL=="tty[0-9]",             NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="tty[0-9][0-9]",        NAME="%k", GROUP="tty",			OPTIONS="last_rule"
+KERNEL=="console",		NAME="%k", GROUP="tty", MODE="0600"
+KERNEL=="ptmx",			NAME="%k", GROUP="tty", MODE="0666"
+
+# tty devices
+KERNEL=="ttyS[0-9]*",	NAME="%k", SYMLINK="tts/%n", GROUP="tty"
+KERNEL=="ttyUSB[0-9]*",	NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660"
+KERNEL=="ippp0",	NAME="%k", GROUP="tty"
+KERNEL=="isdn*"		NAME="%k", GROUP="tty"
+KERNEL=="dcbri*",	NAME="%k", GROUP="tty"
+KERNEL=="ircomm*",	NAME="%k", GROUP="tty"
+
+# all block devices
+SUBSYSTEM=="block", GROUP="disk"
+
+# cdrom symlinks and other good cdrom naming
+BUS=="ide",	KERNEL=="hd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="sr[0-9]*", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="scd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode"
+BUS=="scsi",	KERNEL=="sg[0-9]*", ACTION=="add", DRIVERS=="sr", GROUP="cdrom"
+ENV{ID_CDROM}=="?*",		PROGRAM="seq_node.sh %r %k cdrom", SYMLINK+="%c", GROUP="cdrom"
+ENV{ID_CDROM_CD_RW}=="?*",	PROGRAM="seq_node.sh %r %k cdrw",  SYMLINK+="%c"
+ENV{ID_CDROM_DVD}=="?*",	PROGRAM="seq_node.sh %r %k dvd",   SYMLINK+="%c"
+ENV{ID_CDROM_DVD_R}=="?*",	PROGRAM="seq_node.sh %r %k dvdrw", SYMLINK+="%c"
+
+# disk devices
+KERNEL=="sd*",		NAME="%k", GROUP="disk"
+KERNEL=="dasd*",	NAME="%k", GROUP="disk"
+KERNEL=="ataraid*",	NAME="%k", GROUP="disk"
+
+# compaq smart array
+KERNEL=="cciss*",	NAME="%k"
+KERNEL=="ida*",		NAME="%k"
+
+# mylex
+KERNEL=="rd*",		NAME="%k"
+
+# dri devices
+KERNEL=="card*",	NAME="dri/card%n", GROUP="video"
+KERNEL=="nvidia*",	NAME="%k", GROUP="video"
+KERNEL=="3dfx*",	NAME="%k", GROUP="video"
+
+# alsa devices
+SUBSYSTEM=="sound", GROUP="audio"
+KERNEL=="controlC[0-9]*",	NAME="snd/%k"
+KERNEL=="hw[CD0-9]*",		NAME="snd/%k"
+KERNEL=="pcm[CD0-9cp]*",	NAME="snd/%k"
+KERNEL=="midiC[D0-9]*",		NAME="snd/%k"
+KERNEL=="timer",		NAME="snd/%k"
+KERNEL=="seq",			NAME="snd/%k"
+
+# capi devices
+KERNEL=="capi",		NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout"
+KERNEL=="capi*",	NAME="capi/%n", GROUP="dialout"
+
+# cpu devices
+KERNEL=="cpu[0-9]*",	NAME="cpu/%n/cpuid"
+KERNEL=="msr[0-9]*",	NAME="cpu/%n/msr"
+KERNEL=="microcode",	NAME="cpu/microcode"
+
+# dm devices (ignore them)
+KERNEL=="dm-[0-9]*",	OPTIONS="ignore_device"
+# create a symlink named after the device map name
+# note devmap_name comes with extras/multipath
+#KERNEL=="dm-[0-9]*",	PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c"
+KERNEL=="device-mapper",	NAME="mapper/control"
+
+# fb devices
+KERNEL=="fb[0-9]*",	NAME="fb/%n", SYMLINK+="%k", GROUP="video"
+
+# floppy devices
+KERNEL=="fd[0-9]*",	NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy"
+
+# i2c devices
+KERNEL=="i2c-[0-9]*",	NAME="i2c/%n", SYMLINK+="%k"
+
+# input devices
+KERNEL=="mice",		NAME="input/%k", MODE="0644"
+KERNEL=="mouse*",	NAME="input/%k", MODE="0644"
+KERNEL=="event*",	NAME="input/%k", MODE="0600"
+KERNEL=="js*",		NAME="input/%k", MODE="664"
+KERNEL=="ts*",		NAME="input/%k", MODE="0600"
+
+# loop devices
+KERNEL=="loop[0-9]*",	NAME="loop/%n", SYMLINK+="%k", GROUP="disk"
+
+# md block devices
+KERNEL=="md[0-9]*",	NAME="md/%n", SYMLINK+="%k", GROUP="disk"
+
+# aoe char devices,
+SUBSYSTEM=="aoe", KERNEL=="discover",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err",	NAME="etherd/%k", GROUP="disk", MODE="0440"
+SUBSYSTEM=="aoe", KERNEL=="interfaces",	NAME="etherd/%k", GROUP="disk", MODE="0220"
+
+# misc devices
+KERNEL=="agpgart",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="psaux",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="rtc",		NAME="misc/%k", SYMLINK+="%k", MODE="0664"
+KERNEL=="uinput",	NAME="misc/%k", SYMLINK+="%k"
+KERNEL=="inotify",	NAME="misc/%k", SYMLINK+="%k", MODE="0666"
+
+# netlink devices
+KERNEL=="route",	NAME="netlink/%k"
+KERNEL=="skip",		NAME="netlink/%k"
+KERNEL=="usersock",	NAME="netlink/%k"
+KERNEL=="fwmonitor",	NAME="netlink/%k"
+KERNEL=="tcpdiag",	NAME="netlink/%k"
+KERNEL=="nflog",	NAME="netlink/%k"
+KERNEL=="xfrm",		NAME="netlink/%k"
+KERNEL=="arpd",		NAME="netlink/%k"
+KERNEL=="route6",	NAME="netlink/%k"
+KERNEL=="ip6_fw",	NAME="netlink/%k"
+KERNEL=="dnrtmsg",	NAME="netlink/%k"
+KERNEL=="tap*",		NAME="netlink/%k"
+
+# network devices
+KERNEL=="tun",		NAME="net/%k",	MODE="0600"
+
+# ramdisk devices
+KERNEL=="ram[0-9]*",	NAME="rd/%n", SYMLINK+="%k"
+
+# IEEE1394 (firewire) devices (must be before raw devices below)
+KERNEL=="raw1394",	NAME="%k",		GROUP="video"
+KERNEL=="dv1394*",	NAME="dv1394/%n",	GROUP="video"
+KERNEL=="video1394*",	NAME="video1394/%n",	GROUP="video"
+
+# raw devices
+KERNEL=="raw[0-9]*",	NAME="raw/%k", GROUP="disk"
+KERNEL=="ram*",		NAME="%k", GROUP="disk"
+
+# sound devices
+KERNEL=="adsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="adsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="audio[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp",			NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="dsp[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="mixer[0-9]*",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer",		NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+KERNEL=="sequencer[0-9]*",	NAME="sound/%k", SYMLINK+="%k", GROUP="audio"
+
+# memory devices
+KERNEL=="random",	NAME="%k", MODE="0666"
+KERNEL=="urandom",	NAME="%k", MODE="0444"
+KERNEL=="mem",		NAME="%k", MODE="0640"
+KERNEL=="kmem",		NAME="%k", MODE="0640"
+KERNEL=="port",		NAME="%k", MODE="0640"
+KERNEL=="full",		NAME="%k", MODE="0666"
+KERNEL=="null",		NAME="%k", MODE="0666"
+KERNEL=="zero",		NAME="%k", MODE="0666"
+
+# usb devices
+KERNEL=="hiddev*",		NAME="usb/%k"
+KERNEL=="auer*",		NAME="usb/%k"
+KERNEL=="legousbtower*",	NAME="usb/%k", GROUP="usb"
+KERNEL=="dabusb*",		NAME="usb/%k"
+BUS=="usb", KERNEL=="lp[0-9]*",	NAME="usb/%k", GROUP="lp"
+
+# v4l devices
+KERNEL=="video[0-9]*",	NAME="v4l/video%n", SYMLINK+="video%n", GROUP="video"
+KERNEL=="radio[0-9]*",	NAME="v4l/radio%n", SYMLINK+="radio%n", GROUP="video"
+KERNEL=="vbi[0-9]*",	NAME="v4l/vbi%n", SYMLINK+="vbi%n", GROUP="video"
+KERNEL=="vtx[0-9]*",	NAME="v4l/vtx%n", GROUP="video"
+
+# dvb devices
+SUBSYSTEM=="dvb", PROGRAM="/bin/sh -c 'K=%k; K=$${K#dvb}; printf dvb/adapter%%i/%%s $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="video"
+
+# Asterisk Zaptel devices
+KERNEL=="zapctl",	NAME="zap/ctl"
+KERNEL=="zaptimer",	NAME="zap/timer"
+KERNEL=="zapchannel",	NAME="zap/channel"
+KERNEL=="zappseudo",	NAME="zap/pseudo"
+KERNEL=="zap[0-9]*",	NAME="zap/%n"
+
+# pilot/palm devices
+KERNEL=="pilot",	NAME="%k", GROUP="uucp"
+
+# jaz devices
+KERNEL=="jaz*",		NAME="%k", GROUP="disk"
+
+# zip devices
+KERNEL=="pocketzip*",	NAME="%k", GROUP="disk"
+KERNEL=="zip*",		NAME="%k", GROUP="disk"
+
+# ls120 devices
+KERNEL=="ls120",	NAME="%k", GROUP="disk"
+
+# lp devices
+KERNEL=="lp*",		NAME="%k", GROUP="lp"
+KERNEL=="irlpt",	NAME="%k", GROUP="lp"
+KERNEL=="usblp",	NAME="%k", GROUP="lp"
+KERNEL=="lp*",		NAME="%k", GROUP="lp"
+KERNEL=="parport*",	NAME="%k", GROUP="lp"
+
+# tape devices
+KERNEL=="ht*",		NAME="%k", GROUP="tape"
+KERNEL=="nht*",		NAME="%k", GROUP="tape"
+KERNEL=="pt*",		NAME="%k", GROUP="tape"
+KERNEL=="npt*",		NAME="%k", GROUP="tape"
+KERNEL=="st*",		NAME="%k", GROUP="tape"
+KERNEL=="nst*",		NAME="%k", GROUP="tape"
+KERNEL=="osst*",	NAME="%k", GROUP="tape"
+KERNEL=="nosst*",	NAME="%k", GROUP="tape"
+
+# diskonkey devices
+KERNEL=="diskonkey*",	NAME="%k", GROUP="disk"
+
+# rem_ide devices
+KERNEL=="microdrive*",	NAME="%k", GROUP="disk"
+
+# kbd devices
+KERNEL=="kbd",		NAME="%k", MODE="0664"
+
+# Sony Vaio Jogdial sonypi device
+KERNEL=="sonypi",	NAME="%k", MODE="0666"
+
+# packet devices
+KERNEL=="pktcdvd",		NAME="pktcdvd/control", GROUP="cdrw", MODE="0660"
+KERNEL=="pktcdvd[0-9]*",	NAME="pktcdvd/pktcdvd%n", GROUP="cdrw", MODE="0660"
+
+# infiniband devices
+KERNEL=="umad*",	NAME="infiniband/%k"
+KERNEL=="issm*",	NAME="infiniband/%k"
+
+
+# usbfs-like device nodes
+SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0644"
+
+
+# Module autoloading
+
+# Autoload modules that lack aliases but have them defined inutoload modules
+SYSFS{modalias}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}"
+
+# /etc/modprobe.conf.
+SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'"
+# If you have problems with some pnp modules being loaded, please enter the
+# following aliases into the modprobe configuration files.  These are needed by
+# udev to autoload some modules
+# alias pnp:dPNP0510 irtty-sir
+# alias pnp:dPNP0511 irtty-sir
+# alias pnp:dPNP0700 floppy
+# alias pnp:dPNP0800 pcspkr
+# alias pnp:dPNP0b00 rtc
+# alias pnp:dPNP0303 atkbd
+# alias pnp:dPNP0f13 psmouse
+# alias pnp:dPNPb02f analog
+
+
+
+# Load firmware
+SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh"
+
+
+# be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems
+# run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart
+ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}"
+
+# always run /etc/dev.d/ stuff for now.
+RUN+="udev_run_devd $env{SUBSYSTEM}"
+
+# debugging monitor
+RUN+="socket:/org/kernel/udev/monitor"
diff --git a/udev-bugs/sys-fs/udev/udev-103-r1.ebuild b/udev-bugs/sys-fs/udev/udev-103-r1.ebuild
new file mode 100644
index 0000000..75a9e27
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/udev-103-r1.ebuild
@@ -0,0 +1,321 @@
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-103.ebuild,v 1.6 2006/12/11 16:05:36 gustavoz Exp $
+
+inherit eutils flag-o-matic multilib
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~m68k ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86"
+IUSE="selinux"
+
+# still rely on hotplug (need to fix that), but now we implement coldplug
+
+DEPEND="sys-apps/hotplug-base"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+	>=sys-apps/baselayout-1.11.14"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+	unpack ${A}
+
+	cd "${S}"
+
+	# patches go here...
+	#epatch ${FILESDIR}/${P}-udev_volume_id.patch
+
+	# No need to clutter the logs ...
+	sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+	# Do not use optimization flags from the package
+	sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+	# Make sure there is no sudden changes to udev.rules.gentoo
+	# (more for my own needs than anything else ...)
+	MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+	MD5=${MD5/  -/}
+	if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
+	then
+		echo
+		eerror "gentoo/udev.rules has been updated, please validate!"
+		die "gentoo/udev.rules has been updated, please validate!"
+	fi
+}
+
+src_compile() {
+	filter-flags -fprefetch-loop-arrays
+	local myconf=
+	local extras="extras/ata_id \
+				  extras/cdrom_id \
+				  extras/dasd_id \
+				  extras/edd_id \
+				  extras/firmware \
+				  extras/floppy \
+				  extras/path_id \
+				  extras/run_directory \
+				  extras/scsi_id \
+				  extras/usb_id \
+				  extras/volume_id \
+				  extras/rule_generator"
+
+	use selinux && myconf="${myconf} USE_SELINUX=true"
+
+	# Not everyone has full $CHOST-{ld,ar,etc...} yet
+	local mycross=""
+	type -p ${CHOST}-ar && mycross=${CHOST}-
+
+	echo "get_libdir = $(get_libdir)"
+	# Do not work with emake
+	make \
+		EXTRAS="${extras}" \
+		udevdir="/dev/" \
+		CROSS_COMPILE=${mycross} \
+		${myconf} || die
+}
+
+src_install() {
+	# we install everything by "hand" and don't rely on the udev Makefile to do
+	# it for us (why? it's easier that way...)
+	dobin udevinfo		|| die "Required binary not installed properly"
+	dobin udevtest		|| die "Required binary not installed properly"
+	dobin udevmonitor	|| die "Required binary not installed properly"
+	into /
+	dosbin udevd		|| die "Required binary not installed properly"
+	dosbin udevstart	|| die "Required binary not installed properly"
+	dosbin udevtrigger	|| die "Required binary not installed properly"
+	dosbin udevcontrol	|| die "Required binary not installed properly"
+	dosbin udevsettle	|| die "Required binary not installed properly"
+
+	# need to keep this until /sbin/rc stops checking for its presence, it's
+	# really not needed for us to work properly at all.
+	dosbin udev			|| die "Required binary not installed properly"
+
+	# Helpers
+	exeinto /lib/udev
+	doexe extras/run_directory/udev_run_devd	|| die "Required helper not installed properly"
+	doexe extras/run_directory/udev_run_hotplugd	|| die "Required helper not installed properly"
+	doexe extras/ata_id/ata_id		|| die "Required helper not installed properly"
+	doexe extras/volume_id/vol_id	|| die "Required helper not installed properly"
+	doexe extras/scsi_id/scsi_id	|| die "Required helper not installed properly"
+	doexe extras/usb_id/usb_id		|| die "Required helper not installed properly"
+	doexe extras/path_id/path_id	|| die "Required helper not installed properly"
+	doexe extras/cdrom_id/cdrom_id	|| die "Required helper not installed properly"
+	doexe extras/dasd_id/dasd_id	|| die "Required helper not installed properly"
+	doexe extras/edd_id/edd_id		|| die "Required helper not installed properly"
+	doexe extras/rule_generator/write_cd_rules	|| die "Required helper not installed properly"
+	doexe extras/rule_generator/write_net_rules	|| die "Required helper not installed properly"
+	doexe extras/rule_generator/rule_generator.functions	|| die "Required helper not installed properly"
+	keepdir /lib/udev/state
+
+	# vol_id library (needed by mount and HAL)
+	dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+	# move the .a files to /usr/lib
+	dodir /usr/$(get_libdir)
+	mv -f "${D}"/$(get_libdir)/*.a  "${D}"/usr/$(get_libdir)/
+
+	# handle static linking bug #4411
+	gen_usr_ldscript libvolume_id.so
+
+	# save pkgconfig info
+	insinto /usr/$(get_libdir)/pkgconfig
+	doins extras/volume_id/lib/*.pc
+
+	#exeinto /etc/udev/scripts
+	exeinto /lib/udev
+	#doexe extras/ide-devfs.sh
+	#doexe extras/scsi-devfs.sh
+	#doexe extras/raid-devfs.sh
+	doexe extras/floppy/create_floppy_devices	|| die "Required binary not installed properly"
+	doexe extras/firmware/firmware.sh			|| die "Required binary not installed properly"
+	doexe ${FILESDIR}/seq_node.sh				|| die "Required binary not installed properly"
+
+	# Our udev config file
+	insinto /etc/udev
+	newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+	# Our rules files
+	insinto /etc/udev/rules.d/
+	newins etc/udev/gentoo/udev.rules 50-udev.rules
+	newins ${FILESDIR}/udev.rules-098 50-udev.rules
+	newins ${FILESDIR}/05-udev-early.rules-079 05-udev-early.rules
+	# Use upstream's persistent rules for devices
+	doins etc/udev/rules.d/60-*.rules
+	doins extras/rule_generator/75-*.rules || die "rules not installed properly"
+
+	# scsi_id configuration
+	insinto /etc
+	doins extras/scsi_id/scsi_id.config
+
+	# set up the /etc/dev.d directory tree
+	dodir /etc/dev.d/default
+	dodir /etc/dev.d/net
+	exeinto /etc/dev.d/net
+	doexe extras/run_directory/dev.d/net/hotplug.dev
+
+	# all of the man pages
+	doman *.7
+	doman *.8
+	doman extras/ata_id/ata_id.8
+	doman extras/edd_id/edd_id.8
+	doman extras/scsi_id/scsi_id.8
+	doman extras/volume_id/vol_id.8
+	doman extras/dasd_id/dasd_id.8
+	doman extras/cdrom_id/cdrom_id.8
+	# create a extra symlink for udevcontrol
+	ln -s "${D}"/usr/share/man/man8/udevd.8.gz \
+		"${D}"/usr/share/man/man8/udevcontrol.8.gz
+
+	# our udev hooks into the rc system
+	insinto /lib/rcscripts/addons
+	newins "${FILESDIR}"/udev-start-099.sh udev-start.sh
+	doins "${FILESDIR}"/udev-stop.sh
+
+	# needed to compile latest Hal
+	insinto /usr/include
+	doins extras/volume_id/lib/libvolume_id.h
+
+	dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+	dodoc docs/{overview,udev_vs_devfs}
+	dodoc docs/writing_udev_rules/*
+
+	newdoc extras/volume_id/README README_volume_id
+
+}
+
+pkg_preinst() {
+	if [[ -d ${ROOT}/lib/udev-state ]] ; then
+		mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+		rm -r "${ROOT}"/lib/udev-state
+	fi
+
+	if [ -f "${ROOT}/etc/udev/udev.config" -a \
+	     ! -f "${ROOT}/etc/udev/udev.rules" ]
+	then
+		mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+	fi
+
+	# delete the old udev.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+	fi
+
+	# delete the old wait_for_sysfs.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+	fi
+
+	# delete the old wait_for_sysfs.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
+	fi
+
+	# is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+	coldplug_stale=""
+	if [ -f "${ROOT}/etc/init.d/coldplug" ]
+	then
+		coldplug_stale="1"
+	fi
+
+	# Create some nodes that we know we need.
+	# set the time/date so we can see in /dev which ones we copied over
+	# in the udev-start.sh script
+	mkdir -p ${ROOT}/lib/udev/devices
+
+	if [ ! -e ${ROOT}/lib/udev/devices/null ] ; then
+	    mknod ${ROOT}/lib/udev/devices/null c 1 3
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/null
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/null
+
+	if [ ! -e ${ROOT}/lib/udev/devices/zero ] ; then
+	    mknod ${ROOT}/lib/udev/devices/zero c 1 5
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/zero
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/zero
+
+	if [ ! -e ${ROOT}/lib/udev/devices/console ] ; then
+	    mknod ${ROOT}/lib/udev/devices/console c 5 1
+	fi
+	chmod 600 ${ROOT}/lib/udev/devices/console
+	chown root:tty ${ROOT}/lib/udev/devices/console
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/console
+
+	if [ ! -e ${ROOT}/lib/udev/devices/urandom ] ; then
+	    mknod ${ROOT}/lib/udev/devices/urandom c 1 9
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/urandom
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/urandom
+}
+
+pkg_postinst() {
+	if [ "${ROOT}" = "/" -a -n "`pidof udevd`" ]
+	then
+		killall -15 udevd &>/dev/null
+		sleep 1
+		killall -9 udevd &>/dev/null
+	fi
+	/sbin/udevd --daemon
+
+	# people want reminders, I'll give them reminders.  Odds are they will
+	# just ignore them anyway...
+	if has_version '<sys-fs/udev-046' ; then
+		ewarn "Note: If you rely on the output of udevinfo for anything, please"
+		ewarn "      either run 'udevstart' now, or reboot, in order to get a"
+		ewarn "      up-to-date udev database."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-050' ; then
+		ewarn "Note: If you had written some custom permissions rules, please"
+		ewarn "      realize that the permission rules are now part of the main"
+		ewarn "      udev rules files and are not stand-alone anymore.  This means"
+		ewarn "      you need to rewrite them."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-059' ; then
+		ewarn "Note: If you are upgrading from a version of udev prior to 059"
+		ewarn "      and you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, or the etc/hotplug.d functionality, or just"
+		ewarn "      want to write some very cool and power udev rules, please "
+		ewarn "      read the RELEASE-NOTES file for details on what has changed"
+		ewarn "      with this feature, and how to change your rules to work properly."
+		ewarn
+	elif has_version '<sys-fs/udev-057' ; then
+		ewarn "Note: If you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, please read the RELEASE-NOTES file for details"
+		ewarn "      on what has changed with this feature, and how to change your"
+		ewarn "      rules to work properly."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-063' ; then
+		ewarn "Note: If you use the devfs-style names for your block devices"
+		ewarn "      or use devfs-style names in /etc/inittab or /etc/securetty or"
+		ewarn "      your GRUB or LILO kernel boot command line, you need to"
+		ewarn "      change them back to LSB compliant names, as the devfs names are"
+		ewarn "      now gone.  If you wish to use some persistent names for your"
+		ewarn "      block devices, look at the symlinks in /dev/disk/ for the names"
+		ewarn "      you can use."
+		ewarn
+	fi
+
+	if [[ ${coldplug_stale} == "1" ]] ; then
+		ewarn "A stale coldplug init script found. You should run:"
+		ewarn
+		ewarn "      rc-update del coldplug"
+		ewarn "      rm -f /etc/init.d/coldplug"
+		ewarn
+		ewarn "udev now provides its own coldplug functionality."
+	fi
+
+	einfo
+	einfo "For more information on udev on Gentoo, writing udev rules, and"
+	einfo "         fixing known issues visit:"
+	einfo "         http://www.gentoo.org/doc/en/udev-guide.xml"
+}
diff --git a/udev-bugs/sys-fs/udev/udev-103.ebuild b/udev-bugs/sys-fs/udev/udev-103.ebuild
new file mode 100644
index 0000000..f3fc500
--- /dev/null
+++ b/udev-bugs/sys-fs/udev/udev-103.ebuild
@@ -0,0 +1,321 @@
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-103.ebuild,v 1.6 2006/12/11 16:05:36 gustavoz Exp $
+
+inherit eutils flag-o-matic multilib
+
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~alpha ~amd64 arm hppa ia64 m68k ~mips ~ppc ppc64 s390 sh sparc x86"
+IUSE="selinux"
+
+# still rely on hotplug (need to fix that), but now we implement coldplug
+
+DEPEND="sys-apps/hotplug-base"
+RDEPEND="!sys-apps/coldplug"
+RDEPEND="${DEPEND} ${RDEPEND}
+	>=sys-apps/baselayout-1.11.14"
+# We need the lib/rcscripts/addon support
+PROVIDE="virtual/dev-manager"
+
+src_unpack() {
+	unpack ${A}
+
+	cd "${S}"
+
+	# patches go here...
+	#epatch ${FILESDIR}/${P}-udev_volume_id.patch
+
+	# No need to clutter the logs ...
+	sed -ie '/^DEBUG/ c\DEBUG = false' Makefile
+	# Do not use optimization flags from the package
+	sed -ie 's|$(OPTIMIZATION)||g' Makefile
+
+	# Make sure there is no sudden changes to udev.rules.gentoo
+	# (more for my own needs than anything else ...)
+	MD5=`md5sum < "${S}/etc/udev/gentoo/udev.rules"`
+	MD5=${MD5/  -/}
+	if [ "${MD5}" != "295a9b7bdc8bdb239f8860d14af761b0" ]
+	then
+		echo
+		eerror "gentoo/udev.rules has been updated, please validate!"
+		die "gentoo/udev.rules has been updated, please validate!"
+	fi
+}
+
+src_compile() {
+	filter-flags -fprefetch-loop-arrays
+	local myconf=
+	local extras="extras/ata_id \
+				  extras/cdrom_id \
+				  extras/dasd_id \
+				  extras/edd_id \
+				  extras/firmware \
+				  extras/floppy \
+				  extras/path_id \
+				  extras/run_directory \
+				  extras/scsi_id \
+				  extras/usb_id \
+				  extras/volume_id \
+				  extras/rule_generator"
+
+	use selinux && myconf="${myconf} USE_SELINUX=true"
+
+	# Not everyone has full $CHOST-{ld,ar,etc...} yet
+	local mycross=""
+	type -p ${CHOST}-ar && mycross=${CHOST}-
+
+	echo "get_libdir = $(get_libdir)"
+	# Do not work with emake
+	make \
+		EXTRAS="${extras}" \
+		udevdir="/dev/" \
+		CROSS_COMPILE=${mycross} \
+		${myconf} || die
+}
+
+src_install() {
+	# we install everything by "hand" and don't rely on the udev Makefile to do
+	# it for us (why? it's easier that way...)
+	dobin udevinfo		|| die "Required binary not installed properly"
+	dobin udevtest		|| die "Required binary not installed properly"
+	dobin udevmonitor	|| die "Required binary not installed properly"
+	into /
+	dosbin udevd		|| die "Required binary not installed properly"
+	dosbin udevstart	|| die "Required binary not installed properly"
+	dosbin udevtrigger	|| die "Required binary not installed properly"
+	dosbin udevcontrol	|| die "Required binary not installed properly"
+	dosbin udevsettle	|| die "Required binary not installed properly"
+
+	# need to keep this until /sbin/rc stops checking for its presence, it's
+	# really not needed for us to work properly at all.
+	dosbin udev			|| die "Required binary not installed properly"
+
+	# Helpers
+	exeinto /lib/udev
+	doexe extras/run_directory/udev_run_devd	|| die "Required helper not installed properly"
+	doexe extras/run_directory/udev_run_hotplugd	|| die "Required helper not installed properly"
+	doexe extras/ata_id/ata_id		|| die "Required helper not installed properly"
+	doexe extras/volume_id/vol_id	|| die "Required helper not installed properly"
+	doexe extras/scsi_id/scsi_id	|| die "Required helper not installed properly"
+	doexe extras/usb_id/usb_id		|| die "Required helper not installed properly"
+	doexe extras/path_id/path_id	|| die "Required helper not installed properly"
+	doexe extras/cdrom_id/cdrom_id	|| die "Required helper not installed properly"
+	doexe extras/dasd_id/dasd_id	|| die "Required helper not installed properly"
+	doexe extras/edd_id/edd_id		|| die "Required helper not installed properly"
+	doexe extras/rule_generator/write_cd_rules	|| die "Required helper not installed properly"
+	doexe extras/rule_generator/write_net_rules	|| die "Required helper not installed properly"
+	doexe extras/rule_generator/rule_generator.functions	|| die "Required helper not installed properly"
+	keepdir /lib/udev/state
+
+	# vol_id library (needed by mount and HAL)
+	dolib extras/volume_id/lib/*.a extras/volume_id/lib/*.so*
+	# move the .a files to /usr/lib
+	dodir /usr/$(get_libdir)
+	mv -f "${D}"/$(get_libdir)/*.a  "${D}"/usr/$(get_libdir)/
+
+	# handle static linking bug #4411
+	gen_usr_ldscript libvolume_id.so
+
+	# save pkgconfig info
+	insinto /usr/$(get_libdir)/pkgconfig
+	doins extras/volume_id/lib/*.pc
+
+	#exeinto /etc/udev/scripts
+	exeinto /lib/udev
+	#doexe extras/ide-devfs.sh
+	#doexe extras/scsi-devfs.sh
+	#doexe extras/raid-devfs.sh
+	doexe extras/floppy/create_floppy_devices	|| die "Required binary not installed properly"
+	doexe extras/firmware/firmware.sh			|| die "Required binary not installed properly"
+	doexe ${FILESDIR}/seq_node.sh				|| die "Required binary not installed properly"
+
+	# Our udev config file
+	insinto /etc/udev
+	newins ${FILESDIR}/udev.conf.post_081 udev.conf
+
+	# Our rules files
+	insinto /etc/udev/rules.d/
+	newins etc/udev/gentoo/udev.rules 50-udev.rules
+	newins ${FILESDIR}/udev.rules-098 50-udev.rules
+	newins ${FILESDIR}/05-udev-early.rules-079 05-udev-early.rules
+	# Use upstream's persistent rules for devices
+	doins etc/udev/rules.d/60-*.rules
+	doins extras/rule_generator/75-*.rules || die "rules not installed properly"
+
+	# scsi_id configuration
+	insinto /etc
+	doins extras/scsi_id/scsi_id.config
+
+	# set up the /etc/dev.d directory tree
+	dodir /etc/dev.d/default
+	dodir /etc/dev.d/net
+	exeinto /etc/dev.d/net
+	doexe extras/run_directory/dev.d/net/hotplug.dev
+
+	# all of the man pages
+	doman *.7
+	doman *.8
+	doman extras/ata_id/ata_id.8
+	doman extras/edd_id/edd_id.8
+	doman extras/scsi_id/scsi_id.8
+	doman extras/volume_id/vol_id.8
+	doman extras/dasd_id/dasd_id.8
+	doman extras/cdrom_id/cdrom_id.8
+	# create a extra symlink for udevcontrol
+	ln -s "${D}"/usr/share/man/man8/udevd.8.gz \
+		"${D}"/usr/share/man/man8/udevcontrol.8.gz
+
+	# our udev hooks into the rc system
+	insinto /lib/rcscripts/addons
+	newins "${FILESDIR}"/udev-start-099.sh udev-start.sh
+	doins "${FILESDIR}"/udev-stop.sh
+
+	# needed to compile latest Hal
+	insinto /usr/include
+	doins extras/volume_id/lib/libvolume_id.h
+
+	dodoc ChangeLog FAQ README TODO RELEASE-NOTES
+	dodoc docs/{overview,udev_vs_devfs}
+	dodoc docs/writing_udev_rules/*
+
+	newdoc extras/volume_id/README README_volume_id
+
+}
+
+pkg_preinst() {
+	if [[ -d ${ROOT}/lib/udev-state ]] ; then
+		mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+		rm -r "${ROOT}"/lib/udev-state
+	fi
+
+	if [ -f "${ROOT}/etc/udev/udev.config" -a \
+	     ! -f "${ROOT}/etc/udev/udev.rules" ]
+	then
+		mv -f ${ROOT}/etc/udev/udev.config ${ROOT}/etc/udev/udev.rules
+	fi
+
+	# delete the old udev.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/udev.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/udev.hotplug
+	fi
+
+	# delete the old wait_for_sysfs.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/05-wait_for_sysfs.hotplug
+	fi
+
+	# delete the old wait_for_sysfs.hotplug symlink if it is present
+	if [ -h "${ROOT}/etc/hotplug.d/default/10-udev.hotplug" ]
+	then
+		rm -f ${ROOT}/etc/hotplug.d/default/10-udev.hotplug
+	fi
+
+	# is there a stale coldplug initscript? (CONFIG_PROTECT leaves it behind)
+	coldplug_stale=""
+	if [ -f "${ROOT}/etc/init.d/coldplug" ]
+	then
+		coldplug_stale="1"
+	fi
+
+	# Create some nodes that we know we need.
+	# set the time/date so we can see in /dev which ones we copied over
+	# in the udev-start.sh script
+	mkdir -p ${ROOT}/lib/udev/devices
+
+	if [ ! -e ${ROOT}/lib/udev/devices/null ] ; then
+	    mknod ${ROOT}/lib/udev/devices/null c 1 3
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/null
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/null
+
+	if [ ! -e ${ROOT}/lib/udev/devices/zero ] ; then
+	    mknod ${ROOT}/lib/udev/devices/zero c 1 5
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/zero
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/zero
+
+	if [ ! -e ${ROOT}/lib/udev/devices/console ] ; then
+	    mknod ${ROOT}/lib/udev/devices/console c 5 1
+	fi
+	chmod 600 ${ROOT}/lib/udev/devices/console
+	chown root:tty ${ROOT}/lib/udev/devices/console
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/console
+
+	if [ ! -e ${ROOT}/lib/udev/devices/urandom ] ; then
+	    mknod ${ROOT}/lib/udev/devices/urandom c 1 9
+	fi
+	chmod 666 ${ROOT}/lib/udev/devices/urandom
+	touch -t 200010220101 ${ROOT}/lib/udev/devices/urandom
+}
+
+pkg_postinst() {
+	if [ "${ROOT}" = "/" -a -n "`pidof udevd`" ]
+	then
+		killall -15 udevd &>/dev/null
+		sleep 1
+		killall -9 udevd &>/dev/null
+	fi
+	/sbin/udevd --daemon
+
+	# people want reminders, I'll give them reminders.  Odds are they will
+	# just ignore them anyway...
+	if has_version '<sys-fs/udev-046' ; then
+		ewarn "Note: If you rely on the output of udevinfo for anything, please"
+		ewarn "      either run 'udevstart' now, or reboot, in order to get a"
+		ewarn "      up-to-date udev database."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-050' ; then
+		ewarn "Note: If you had written some custom permissions rules, please"
+		ewarn "      realize that the permission rules are now part of the main"
+		ewarn "      udev rules files and are not stand-alone anymore.  This means"
+		ewarn "      you need to rewrite them."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-059' ; then
+		ewarn "Note: If you are upgrading from a version of udev prior to 059"
+		ewarn "      and you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, or the etc/hotplug.d functionality, or just"
+		ewarn "      want to write some very cool and power udev rules, please "
+		ewarn "      read the RELEASE-NOTES file for details on what has changed"
+		ewarn "      with this feature, and how to change your rules to work properly."
+		ewarn
+	elif has_version '<sys-fs/udev-057' ; then
+		ewarn "Note: If you have written custom rules, and rely on the etc/dev.d/"
+		ewarn "      functionality, please read the RELEASE-NOTES file for details"
+		ewarn "      on what has changed with this feature, and how to change your"
+		ewarn "      rules to work properly."
+		ewarn
+	fi
+	if has_version '<sys-fs/udev-063' ; then
+		ewarn "Note: If you use the devfs-style names for your block devices"
+		ewarn "      or use devfs-style names in /etc/inittab or /etc/securetty or"
+		ewarn "      your GRUB or LILO kernel boot command line, you need to"
+		ewarn "      change them back to LSB compliant names, as the devfs names are"
+		ewarn "      now gone.  If you wish to use some persistent names for your"
+		ewarn "      block devices, look at the symlinks in /dev/disk/ for the names"
+		ewarn "      you can use."
+		ewarn
+	fi
+
+	if [[ ${coldplug_stale} == "1" ]] ; then
+		ewarn "A stale coldplug init script found. You should run:"
+		ewarn
+		ewarn "      rc-update del coldplug"
+		ewarn "      rm -f /etc/init.d/coldplug"
+		ewarn
+		ewarn "udev now provides its own coldplug functionality."
+	fi
+
+	einfo
+	einfo "For more information on udev on Gentoo, writing udev rules, and"
+	einfo "         fixing known issues visit:"
+	einfo "         http://www.gentoo.org/doc/en/udev-guide.xml"
+}