summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDaniel Pielmeier <billie@gentoo.org>2016-10-24 19:24:14 +0200
committerDaniel Pielmeier <billie@gentoo.org>2016-10-24 19:24:14 +0200
commit62bdc2afcddcfeca86061c3ac2e9d1d2b627a1d6 (patch)
tree4bbeab17ed47ea82ffaff4bcc7043f7ea48fc314 /net-print
parentnet-print/hplip-plugin: Remove old. (diff)
downloadgentoo-62bdc2afcddcfeca86061c3ac2e9d1d2b627a1d6.tar.gz
gentoo-62bdc2afcddcfeca86061c3ac2e9d1d2b627a1d6.tar.bz2
gentoo-62bdc2afcddcfeca86061c3ac2e9d1d2b627a1d6.zip
net-print/hplip: Remove old.
Package-Manager: portage-2.3.0
Diffstat (limited to 'net-print')
-rw-r--r--net-print/hplip/Manifest3
-rw-r--r--net-print/hplip/hplip-3.14.10.ebuild266
-rw-r--r--net-print/hplip/hplip-3.16.8.ebuild268
-rw-r--r--net-print/hplip/hplip-3.16.9.ebuild268
4 files changed, 0 insertions, 805 deletions
diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index 808f76d5ec8d..90ca31ae85c7 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -1,7 +1,4 @@
-DIST hplip-3.14.10-patches-1.tar.xz 8140 SHA256 33116a5e2c104495d60f0b15e923b2ae5eaaf269cd5ee8e988b035eb20aa23ab SHA512 a8deb03979c55b660ef299505afc328fc930786ea9d473109a9fafd83d72528a9c3700faf4742f2e05829824fc97c3656538e1a607e2191e617f3944f0482e9a WHIRLPOOL bbf5d62f29c0fb0162f34b7815fc190459c619fdaf4f96e33d085f9b7228fa5431b6d668322256995a0a1d16aa1cccb75171000bbb2334ad3b51fec47f2653c0
-DIST hplip-3.14.10.tar.gz 21773429 SHA256 11b3cd8311dea6b22a4c80be1e5d021e84d15a5f3e7e22cbd43798e5c1a89598 SHA512 ed184c8d0d3d8d5aad454831013d7c5e0b1685b088ee8099b6efc1b152f8b159a2349f23f0c5c77a7a5f1a48165b0e22f2ff83ced1beb14633bd278d4ef4d6dc WHIRLPOOL 8e1985cfd370849db96765f792655da36e22b6cecb660dd4707b0ff33dd53c8b66b2ec73a9596c7e60036edc1843c195bbbde64f37c5a1c319752bf0ebc08eb6
DIST hplip-3.16.2-patches-1.tar.xz 8188 SHA256 8a9a78e0caac1731eae79f047a6054b411c237c579fdfd07bc59d435db708705 SHA512 7eb03c093cfb9ef6b9a980ef5520575310d080c45ed13191933a5facaf9bbb04b38c8381762a3ecd33884ad582830e61e17b6c17f2ed7cdf910670e05eed2510 WHIRLPOOL 6721eac17977485eae0cb22b1702d0479003e3639e806ecd3c5888f1b5015a0bf904512104ebefee4b3d5f64abebd0608090e00310ec8d5b48f210c7e4a95e4e
DIST hplip-3.16.3.tar.gz 22408596 SHA256 42d2302ee38bda41caa0f2f9524a91f531e3aa432814ffd45b3e5c396dc30194 SHA512 32d2f88c0983208e77592f73bf65cf2900cd6aa234d09220a18b45b5fc4bd0d10e9cfc8c7a10639e5a51ad5f5d0f8ed7bd477d08c86b89c633a1bbcd42682915 WHIRLPOOL b287ecf80c2e7b0da0de0afefcf60c507f9d42c74dbba1e745b4b43f253a5b0dedb6398a1f073e14d196296da47764e983138c0151e05bfc7a5dd416458662a0
DIST hplip-3.16.5-patches-1.tar.xz 8200 SHA256 98866e57a247e7a30d9cd584ed9411aa79a6185294a73b4cc5961efe9a5e5fa6 SHA512 36d33da5fc4105183cbc5137845ddccd8ab2b6abbff053a3a51f3da61c26c2d9d48dcb735345fb453abd67b6a0797aa337102c366cce037bc7006599b20b1646 WHIRLPOOL 8ac91bdefeb177c092b1d6de16474e8e1da57ad046dbc579f14fd40a27d1837d9bf142573137ef8d91c37dc7b03ca908fd5bfad23a9815af2015b521091c2700
-DIST hplip-3.16.8.tar.gz 22942175 SHA256 a9da67ae51c17487a8d725eb9c0bf9c6f0416e1fffa7db6cdff5302b1c556ceb SHA512 213a39739834eca4e8b247706394cbeb6cf4ada547711d7b3e9187a43e8da8988b1b3efebdffb709cb73bc9ca863200d1405297d5797260eafae6a68531dc15f WHIRLPOOL ce6c00b8602589c7c16e6e6efb4ac47999c45f95519817f728be2bcdc1269916a5ff6e1f67a45a8f51cd16834ecdf599dfbd0ac18946aa68532b286560ba9956
DIST hplip-3.16.9.tar.gz 23057361 SHA256 cc8cf2a7baa1403cddd6503f120c58780c786b42fad073da6caec7535d3797a6 SHA512 801bf6578759b1204eb8ede376ee0a22a12c7821ceafeb8c84a2aa5596bfccef222a15af896c33ba46c53b3e4776629efee264b6d67487cbf197b028d22b68ff WHIRLPOOL 3374e43630a39c245541180ac9e6b76431687f5b977271a4bc09cd8de897bfc992ab43ab5235bb4806da33a65d22aeb0ea2783fa52501aaafdd142e229621492
diff --git a/net-print/hplip/hplip-3.14.10.ebuild b/net-print/hplip/hplip-3.14.10.ebuild
deleted file mode 100644
index c14e24c5d287..000000000000
--- a/net-print/hplip/hplip-3.14.10.ebuild
+++ /dev/null
@@ -1,266 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-PYTHON_COMPAT=( python2_7 )
-PYTHON_REQ_USE="threads,xml"
-
-inherit eutils fdo-mime linux-info python-single-r1 udev autotools toolchain-funcs
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.14.10-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 arm ppc ppc64 x86"
-
-# zeroconf does not work properly with >=cups-1.4.
-# Thus support for it is also disabled in hplip.
-IUSE="doc fax +hpcups hpijs kde libnotify -libusb0 minimal parport policykit qt4 scanner snmp static-ppds X"
-
-# TODO: check if net-print/cups, net-analyzer/net-snmp
-# are migrated to python-r1
-
-COMMON_DEPEND="
- virtual/jpeg:0
- hpijs? (
- || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] )
- )
- !minimal? (
- ${PYTHON_DEPS}
- >=net-print/cups-1.4.0
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
- fax? ( >=sys-apps/dbus-1.6.8-r1 )
- snmp? (
- net-analyzer/net-snmp
- dev-libs/openssl:0
- )
- )"
-
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
- >=app-text/ghostscript-gpl-8.71-r3
- policykit? (
- sys-auth/polkit
- )
- !minimal? (
- >=dev-python/dbus-python-1.1.1-r1[${PYTHON_USEDEP}]
- >=dev-python/pygobject-2.28.6-r53:2[${PYTHON_USEDEP}]
- kernel_linux? ( virtual/udev !<sys-fs/udev-114 )
- scanner? (
- >=dev-python/reportlab-2.6[${PYTHON_USEDEP}]
- >=dev-python/pillow-1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- fax? (
- >=dev-python/reportlab-2.6[${PYTHON_USEDEP}]
- >=dev-python/dbus-python-1.1.1-r1[${PYTHON_USEDEP}]
- )
- qt4? (
- >=dev-python/PyQt4-4.9.6-r2[dbus,X,${PYTHON_USEDEP}]
- libnotify? (
- >=dev-python/notify-python-0.1.1-r3[${PYTHON_USEDEP}]
- )
- )
- )"
-
-REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- ! use qt4 && ewarn "You need USE=qt4 for the hplip GUI."
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- EPATCH_SUFFIX="patch" \
- EPATCH_FORCE="yes" \
- epatch "${WORKDIR}"
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use fax || use qt4 ; then
- myconf="${myconf} --enable-dbus-build"
- else
- myconf="${myconf} --disable-dbus-build"
- fi
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable parport pp-build) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build) \
- $(use_enable qt4 gui-build) \
- $(use_enable qt4) \
- $(use_enable policykit)
-}
-
-src_install() {
- default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${D}"/etc/sane.d/dll.conf || die
-
- rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${D}"/usr/share/hal || die
-
- prune_libtool_files --all
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${D}"/usr/share/hplip
- fi
-}
-
-pkg_postinst() {
- if [[ -z "${REPLACING_VERSIONS}" ]]; then
- elog "For more information on setting up your printer please take"
- elog "a look at the hplip section of the gentoo printing guide:"
- elog "https://wiki.gentoo.org/wiki/Printing"
- elog
- elog "Any user who wants to print must be in the lp group."
- elog
- elog "Please note: Printers requiring a binary plugin are currently"
- elog "not supported. All bugs regarding the plugin are most likely"
- elog "closed. A bug about including the plugin package to gentoo is"
- elog "available here: https://bugs.gentoo.org/352439"
- fi
-}
diff --git a/net-print/hplip/hplip-3.16.8.ebuild b/net-print/hplip/hplip-3.16.8.ebuild
deleted file mode 100644
index e991e1ff1018..000000000000
--- a/net-print/hplip/hplip-3.16.8.ebuild
+++ /dev/null
@@ -1,268 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_3,3_4} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
- virtual/jpeg:0
- hpijs? (
- || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] )
- )
- >=net-print/cups-1.4.0
- !minimal? (
- ${PYTHON_DEPS}
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
- fax? ( >=sys-apps/dbus-1.6.8-r1 )
- snmp? (
- net-analyzer/net-snmp
- dev-libs/openssl:0
- )
- )"
-
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
- >=app-text/ghostscript-gpl-8.71-r3
- policykit? ( sys-auth/polkit )
- !minimal? (
- >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
- dev-python/pygobject[${PYTHON_USEDEP}]
- kernel_linux? ( virtual/udev )
- scanner? (
- >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}]
- >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] )
- qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] )
- qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] )
- )"
-
-REQUIRED_USE="
- !minimal? ( ${PYTHON_REQUIRED_USE} )
- !minimal? ( qt4? ( !qt5 ) )
-"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- ! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI."
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- eapply "${WORKDIR}/patches"
-
- default
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use qt4 || use qt5 ; then
- myconf="${myconf} --enable-gui-build"
- else
- myconf="${myconf} --disable-gui-build"
- fi
-
- if use fax || use qt4 || use qt5 ; then
- myconf="${myconf} --enable-dbus-build"
- else
- myconf="${myconf} --disable-dbus-build"
- fi
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable parport pp-build) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build) \
- $(use_enable qt4) \
- $(use_enable qt5) \
- $(use_enable policykit)
-}
-
-src_install() {
- # disable parallel install
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
- emake -j1 DESTDIR="${D}" install
- einstalldocs
- # default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${D}"/etc/sane.d/dll.conf || die
-
- rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${D}"/usr/share/hal || die
-
- prune_libtool_files --all
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${D}"/usr/share/hplip
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
-}
diff --git a/net-print/hplip/hplip-3.16.9.ebuild b/net-print/hplip/hplip-3.16.9.ebuild
deleted file mode 100644
index e991e1ff1018..000000000000
--- a/net-print/hplip/hplip-3.16.9.ebuild
+++ /dev/null
@@ -1,268 +0,0 @@
-# Copyright 1999-2016 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_3,3_4} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit eutils linux-info python-single-r1 readme.gentoo-r1 udev autotools
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde -libusb0 minimal parport policykit +qt4 qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
- virtual/jpeg:0
- hpijs? (
- || ( >=net-print/cups-filters-1.0.43-r1[foomatic] >=net-print/foomatic-filters-3.0.20080507[cups] )
- )
- >=net-print/cups-1.4.0
- !minimal? (
- ${PYTHON_DEPS}
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( >=media-gfx/sane-backends-1.0.19-r1 )
- fax? ( >=sys-apps/dbus-1.6.8-r1 )
- snmp? (
- net-analyzer/net-snmp
- dev-libs/openssl:0
- )
- )"
-
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig"
-
-RDEPEND="${COMMON_DEPEND}
- >=app-text/ghostscript-gpl-8.71-r3
- policykit? ( sys-auth/polkit )
- !minimal? (
- >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
- dev-python/pygobject[${PYTHON_USEDEP}]
- kernel_linux? ( virtual/udev )
- scanner? (
- >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}]
- >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- fax? ( >=dev-python/reportlab-3.1.44-r2[${PYTHON_USEDEP}] )
- qt4? ( >=dev-python/PyQt4-4.11.1[dbus,X,${PYTHON_USEDEP}] )
- qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,${PYTHON_USEDEP}] )
- )"
-
-REQUIRED_USE="
- !minimal? ( ${PYTHON_REQUIRED_USE} )
- !minimal? ( qt4? ( !qt5 ) )
-"
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- ! use qt4 && ! use qt5 && ewarn "You need USE=qt4 or USE=qt5 for the hplip GUI."
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- eapply "${WORKDIR}/patches"
-
- default
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use qt4 || use qt5 ; then
- myconf="${myconf} --enable-gui-build"
- else
- myconf="${myconf} --disable-gui-build"
- fi
-
- if use fax || use qt4 || use qt5 ; then
- myconf="${myconf} --enable-dbus-build"
- else
- myconf="${myconf} --disable-dbus-build"
- fi
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable parport pp-build) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build) \
- $(use_enable qt4) \
- $(use_enable qt5) \
- $(use_enable policykit)
-}
-
-src_install() {
- # disable parallel install
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
- emake -j1 DESTDIR="${D}" install
- einstalldocs
- # default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${D}"/etc/sane.d/dll.conf || die
-
- rm -f "${D}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${D}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${D}"/usr/share/hal || die
-
- prune_libtool_files --all
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${D}"/usr/share/hplip
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
-}